Monitoring SAN through OpsMgr 2012 R2

Hello All..................I am trying to monitor SAN through OpsMgr 2012 R2.
1.  What would be required for such a configuration?  I have following
-   Management Pack for SAN
-   IP Address
-   User Name and Password
2.  WHat would be high level steps?  Any step by step guide would be appreciated.  THanks.

You have to share more information...
What storage?
What tapes?
What switches/directors?
To monitor your devices as network devices you just need SNMP ports (161/162) and ICMP enabled. Minimum requirement is SNMP get for the discovery and monitors/rules that poll the device.
Cheers,
Patrick
Please remember to click “Mark as Answer” on the post that helped you.
Patrick Seidl (System Center and Private Cloud)
Website: http://www.syliance.com
Blog: http://www.systemcenterrocks.com

Similar Messages

  • [OpsMgr 2012 SP1 RU1] Network Devices disappeared

    Hello,
    I have enabled network monitoring on my OpsMgr 2012 environment.
    I created explicit discovery rules to discover around 20 newtork devices
    There are two CISCO 6506 switches running in pair with IP address 172.x.x.117 and 172.x.x.118
    Both switches are discovered and under monitored successfully, I can monitored the Proccessor usage, ports, etc
    However, after sometime, the 172.x.x.117 switch disappeared from the console.
    I tried to re-discover it, but it eventually disappeared again.
    Please help on this issue, is it a bug or something? the second swtich 172.x.x.118 is being monitored normally without any issue
    Thank you very much

    I have the same problem, but the network device thats disappears for me is a windows server 2008 R2 that I have added as a network device.

  • Adding Company Knowledge with OpsMgr 2012 Console - "Failed to launch Microsoft Word"

    Hi everyone!
    I'm trying to add company knowledge using the OpsMgr 2012 console (32-bit) on Windows 7 Ultimate (32-bit) using the guidelines provided at the following link...
    http://technet.microsoft.com/en-us/library/hh212900.aspx
    I'm using Office 2010 Pro Plus SP1 (32-bit) with the .NET Programmability feature and the Microsoft Visual Studio 2005 Tools for Office Second Edition Runtime installed, but I get the dreaded "failed to launch Microsoft Word" error...
    ...any help or guidance would be greatly apprecaited!
    Regards,
    JJ

    Thanks Andres!
    I have confirmed that the following instructions does allow you to use Word 2010 32-bit running on Windows 7 64-bit or Windows Server 2008 R2 to edit company
    knowledge...
    1. Go to the directory where the OpsMgr console is installed (example: C:\Program Files\System Center\Operations Manager 2012\Console )
    2. Make a copy of Microsoft.EnterpriseManagement.Monitoring.Console.exe.config
    3. Edit Microsoft.EnterpriseManagement.Monitoring.Console.exe.config using Administrator rights
    4. Search for “</dependentAssembly>” and remove the “<publisherPolicy apply="no" />” line immediately following the “</dependentAssembly>” line
    Hope this helps!
    Regards,
    JJ
    Well, firstly I have to agree with other people's comments along the lines of "It shouldn't be this hard!", but I can happily say that the solution above (by IM5FOOTNOTHIN)
    worked for me...once I noticed this crucial footnote: "Do this for
    ALL instances of the
    <publisherPolicy apply="no" /> line that immediately follow the </dependentAssembly> line"

  • OpsMgr 2012 R2 environment, reports in newly imported MPs not deploying to reporting services

    We have an OpsMgr 2012 R2 environment that has been up and running for several months now. Recently we attempted to import a new MP with reports (the Veeam Report Library) - the import was successful, but the Veeam folder and reports never appear in the
    OpsMgr reporting console or in the report server web page, even after waiting several hours and even overnight.
    We have deleted and reimported the MP with no luck. We have restarted the SRS server with no luck. We have scoured the logs of the servers and found no events that appear to be related, and there are no health states or alerts in OpsMgr indicating any issues.
    We also tried importing a new, different management pack with reports (Windows Logical Disk extension pack) and those reports also have not shown up.
    Note that for both MPs the associated rules/monitors show up as expected, it is only the reports that are an issue. Also, all the previously imported reports are still available and functioning normally, it's only newly-imported reports that are failing
    to show up.
    We previously imported dozens of MPs with no issues and there have been no configuration changes to the environment. With no OpsMgr alerts or health issues, and no seemingly related event log entries we're not sure where to check next to see the progress,
    status, and issues with report deployment, any help in pointing us in the right direction is appreciated.

    Hi,
    Would you please restart data access service and system center management configuration service to check the result?
    In addition, have you checked the operation manager event logs with event viewer, we may find helpful information there to troubleshoot this issue.
    Regards,
    Yan Li
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • MS Office Pro 2013 Deployment through SCCM 2012 R2

    Hi Friends,
    I have deployed MS Office Pro 2013 through SCCM 2012. But from Windows 7 Client Machines It's not Installing. Noticed following error in Software Center.
    I'm testing two deployments before bring into production.
    Test Machine 1 :  Purpose = Available 
    From Software Center I have found Test Machine 1 is Status failed.
    Test Machine 2 : Purpose = Required
    From Software Center I have found Test Machine 2 is Status post due-will be retried
    The following Error code is same for both Machines.
    ====================================================
    The software change returned error code 0x87D00607(-2016410105).
    ====================================================
    Any idea please .
    Regards,Ali

    Hi,
    Check out this great guide from Ronni on how to deploy Office 2013 using Configuration Manager 2012, a good read.https://gallery.technet.microsoft.com/office/How-to-Deploying-Office-0f954e7f
    Are the content succefully deployed to all DPs?
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • How to mirror to tv monitor using macbook pro 2012

    how to mirror to tv monitor using macbook pro 2012.  The airplay is not displayed anywhere except I Tunes which only plays what is on I Tunes.

    Howdy there nell a-7,
    It sounds like you are not seeing the Airplay icon in the menu bar on your Mac but you do see it in iTunes. I would use these steps from the following article to help troubleshoot the issue:
    iOS: Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/TS4215
    Try these steps first
    Verify that your iOS device's software is up to date.
    Verify your Apple TV's software is up to date.
    Verify that your iOS device has Wi-Fi turned on. Enable Wi-Fi on your iOS device by going to Settings > Wi-Fi.
    All AirPlay-enabled devices must be connected to the same Wi-Fi network.
    Some Wi-Fi network configurations offer a Guest Network. On your Apple TV, go to Settings > General >Network and ensure that you're connecting to the same Wi-Fi network on your iOS device. On your iOS device, tap Setting > Wi-Fi and confirm that this matches your Apple TV.
    If the AirPlay icon doesn't appear
    Ensure that you have followed the steps in using AirPlay and AirPlay Mirroring.If you are still unable to see the AirPlay icon  , try one of the following steps:
    If trying to AirPlay, or AirPlay mirror, to your Apple TV, ensure that AirPlay is enabled on your Apple TV as well. You can enable or disable AirPlay on Apple TV in the AirPlay menu: Settings > AirPlay.
    Check Internet or network connectivity on all affected devices.
    Some content requires an Internet connection to authorize content playback. AirPlay capabilities may be limited if your network is not connected to the Internet.
    If attempting to use AirPlay from a third-party app or a website from your Safari app on your iOS device, confirm that the app or website is AirPlay compatible (refer to the developers of the app or website for additional information).
    Here is some additional information about Airplay for Mac:
    About AirPlay Mirroring in OS X
    http://support.apple.com/kb/HT5404
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • How do you monitor direct through hardware?

    Hello,
    I am experiencing popping sounds when I record in a very simple setup and just want to monitor direct through my Motu Traveler. This will allow me to keep latency to a minimum and my buffer size relatively low.
    Can you advise me how to engage this option on Logic 7??
    Is it via 'Software Monitoring'??
    Thanks,
    Jason

    Can you advise me how to engage this option on Logic 7??
    First you have to deactivate "Software Monitoring" in Logic.
    There must be an extra software by MotU for adjusting direct monitoring.
    Don't know the name. Look in your Applications folder.

  • What is the minimum permission set required to query alert information using OpsMgr 2012 SDK?

    Hi,
    I am using the OpsMgr 2012 SDK to retrieve alert information from SCOM.
    I tried configuring a read-only role for a user account (Group Scope: All, Dashboards & Views: All) but, as I call some of the APIs like Administration.GetAllManagementServers(), Administration.GetAllAgentManagedComputers() etc. I get a UnauthorizedAccessEnterpriseManagementException.
    I need to know what are the minimum permissions required for a user to query alert information and to make calls I mentioned above using the OpsMgr 2012 SDK.
    Warm Regards
    Himanshu Agarwal

    Thanks for the reply.
    Just to give you a context, I am writing a client application where a user can fetch alert information from SCOM using OpsMgr 2012 SDK. There could be many users that would use this application, hence I need to know the minimum set of permissions I can grant
    or add them to a group for easy maintenance.
    I believed Read-Only admin role was intended for that purpose but some of the SDK APIs as I mentioned throw the said exception.
    I would like to know, how can i create such role/group from SCOM 2012 console.
    PS: SDK and Config account is used by SCOM to perform DB operations and I would not like to impersonate this account in my client application. Instead I want to make my clients as admins with just enough permissions to read information. I'll have a better
    control this way.

  • SP1 does not get installed when the machine is set to Japanese Language, software push through sccm 2012

    Hi,
    Please help me with the below issue, iam trying to deploy Service pack 1 on Windows 7 , 32 Bit OS
    SP1 does not get installed when the machine is set to Japanese Language, software push through sccm 2012 , it does gets installed of installed manually, by remoting into the machine
    also it gets installed through sccm when the machine is set to english language, 
    Thank you
    Tanoj
    OSLM ENGINEER - SCCM 2007 & 2012

    Hi Friends,
    we are deploying the SP1 via SCCM 2012 , and the success rate is around 50 %, its a Light touch installation where user will initiate the installation via Software Center ( Web based )
    i was able to gather few errors , and this are the errors which failed during SP1 Installation 0x800f0828,
    some errors which sccm reports display are 
    11171
    10008
    10021-
    17031 - 
    1602 - User Cancelled installation
    113 - No more internal file identifiers available
    10070 - File handle reference is no longer available
    10050 - A socket operation encountered a dead network
    11170  - The task sequence manager could not successfully complete execution of the task sequence
    i could not find the reason for some of the errors, also i am looking for a fix/woraround if any
    Also i have noticed that in few computers the task seq failed at a place where after the sp1 installation a reboot happens and then PGP BYPASS utility is uninstalled, it did not start the PGP bypass uninstall after reboot
    is there a way to cut short the Task seq and keep it simple ?
    right now its like this 
    1. checking for prerequisite : checks for OS Name and OS version
    2. installs PGP Bootgaurd Bypass
    3. System Restart
    4. Installing Windows 7 Service Pack 1
    5. Final Restart
    6. uninstall PGP Bootgaurd Bypass
    Regards
    Tanoj
    OSLM ENGINEER - SCCM 2007 & 2012

  • How to deploy .msp files through SCCM 2012

    Team,
    Can you please help me to deploy .msp files through SCCM 2012?
    Regards,
    Mahadev Nitture

    I tried to search and got few things but didn't understand to proceed with.
    Please help me with this.
    Regards,
    Mahadev Nitture
    You can use a typical/standard application deployment method (just a minor change because of MSPfile).
    Here are some guides, for typical application deployment:
    http://technet.microsoft.com/en-us/library/gg682159.aspx
    http://www.gerryhampsoncm.blogspot.ie/2013/03/sccm-2012-sp1-step-by-step-guide-part_7075.html
    Familiarise yourself with these methods, then return to the example suggested by Torsten for specific steps for MSP:
    https://social.technet.microsoft.com/Forums/en-US/3dac27fd-ce4f-4d3d-946b-d08d4c7f5af5/best-way-to-deploy-an-msp?forum=configmanagerapps
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Is it possible to monitor audio through my mac while capturing from a tape in FCPX

    Is it possible to monitor audio through my mac while capturing from a tape in FCPX?

    I am sure that as you import a tape you will hear the audio as well as see the video.
    Have you got FCP X?
    If not, download the free 30 day trial.
    http://www.apple.com/finalcutpro/trial/

  • Can windows 8 be upgraded to 8.1 through CM 2012 Software Updates deployment?

    Hi,
    Can windows 8 be upgraded to 8.1 through CM 2012 Software Updates deployment rather than having it downloaded through Windows Store?

    The update is not available via software updates. However, if you are doing multiple updates, you can bypass the Windows Store.
    http://www.petri.co.il/upgrade-to-windows-8-1-without-windows-store.htm#
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • How to manage Work group Computer through SCCM 2012 R2

    Hello..Experts,
    We have to manage the Workgroup Computers both Linux and windows Environment through SCCM 2012 R2.
    what are limitation associated with managing Workgroup computer both with Linux and windows Computers through SCCM.
    Please help us how to achieve this.

    Windows devices that are Workgroup members have the same features for management as domain joined devices except that it is slightly more difficult to get the client installed on these 'unmanaged' devices.
    The Linux computers have only basic support for  Inventory, Application Management, and Compliance.
    I hope that helps,
    Nash
    Nash Pherson, Senior Systems Consultant
    Now Micro -
    My Blog Posts
    If you've found a bug or want the product worked differently,
    share your feedback.
    <-- If this post was helpful, please click "Vote as Helpful".

  • Customize OpsMgr 2012 SP1 Web Console settings

    Hello all, 
    The question I have I've been seaching for days and I wasn't able to find nothing so I decided to ask here and hopefully there's someone
    whose already did it.
    I'm found some divergences on the number of alerts webconsole shows compared to scom console (UI). 
    Due this issue I spent hours of research on blogs and foruns until I find a blog post from Michael Pearson (link below) that list
    a bunch of settings you can add to web.config file, allowing you to choose which interval and which kind of alerts you want to display (critical, critical and errors or critical, errors and information), among others. I tried to make it work on my lab environment
     but these parameters seems to be incompatible with OpsMgr 2012.
    http://blogs.technet.com/b/michaelpearson/archive/2009/11/30/opsmgr-r2-web-console-web-config-settings.aspx
    Does anyone know if similar customization is available on OpsMgr 2012?
    Regards

    You should modify the web.config file under
    c:\program files\Microsoft System Center 2012 R2\operations Manager\webconsole\monitoringview
    Roger

  • How take Branch offices backup centrally through DPM 2012 Server

    Hi
    I have one HQ and 200 branch offices. I want to take the backup of 200 branch offices centrally through DPM 2012 server.
    To achieve this solution what procedure i have to follow. Shall i go with one DPM server at HQ or i have to configured each DPM server at branch offices.
    I have 3 MBS link in each offices.
    Thanks and Regards Deepak

    I'm not sure there is a simple, easy answer.  It depends on what you want to achieve via the DPM protection.  My two cents is to have your DPM servers for the branch offices running at your HQ location so your backups are "offsite".  This
    will protect you in the event a branch office is lost.  All protection elements except for BMR are pretty efficient with DPM and you can compress the traffic from your branch locations.
    You can have multiple DPM servers at HQ and balance your server protection load across that farm.
    You may want to have a DPM server at a branch location that protects some of your HQ servers to provide an offsite backup for HQ resources.
    Be careful with BMR backups across WAN links.  The BMR sends the entire BMR backup every time.  And the BMR backup can include multiple drives if you happened to have installed applications on something other than the system drive (C:).  You
    can get a list of all the drives that will be included in the BMR backup by running this command on a server: "wbadmin start backup -allcritical -backuptarget:\\localhost\c$".  Just hit CTRL-C after it shows you the drives that will be included.
    You'll need to run the DPM backup across a private link or via site-to-site tunnels.  I don't recommend trying to do a DPM backup with a firewall between the two sites.  I'm sure it could be done...but I don't recommend it.
    Rob

Maybe you are looking for