Move quality stock to quality stock

Hi,
I have a requirement where i want to split my quality stock with different batches in the same storage location. I tried doing it with movement type 323 in MB1B but it throws me error as "Change the inspection stock of material 25-0323-08 in QM only".
Can someone please help me what to do next?
Regards,
Alok Tiwari

If your material is managed through QM (inspection lot) then system won't allow you to post QI stock from QI through movement. You have to manage QI stock through inspection lot.
What about material transfer through inspection lot stock posting tab? Go to inspection lot and post stock to "To new material" field and enter new material & batch and save your entry.
Hope this should work in your case. Revert back if any question.

Similar Messages

How to move the stock after quality inspection in wm

hi ,
if i am posting GR with PO for the material XXXX quantity of 10 it should not be posted in Warehouse. after completion of stock inspection in QM then only it moved to warehouse . But the problem is when i post gr in migo the transfer requirement created automatically...if i make this TR manual, two posting occurs one for gr posting and another one for manual tr...how to control this....
ex: matxxx-10 quantity
migo posted(no stock should be posted in wm)
after qc--8 quantity o.k
then we need to move this 8 quantity to storage bin.
how to achive this process in WM. (i already working manual TR it will create two posting)
Thanks
Muthuraman.D

Hi,
Use movement type 103 for GR. so, the goods will posted in to blocked stock. you deselect the auto TR creation for 103 movement type.
once the Quality inspection over the do the 105 to release blocked stock to unresticted stock. in 105 you activate the auto TR creation.
Now you may avoid double tr creation.
this you have to discuss MM consultant also. because of 103 & 105 movement type using.
SAM

QM: How to Move material from quality stock to unrestricted stock

Hi,
How to post material stock from quality to unrestricted without using 321.
Regards,

Hi,
if you have quality management active then you have to mainttain quality view in material master along with the inspection lot settings. now this will result in quality lot creation at the time of GRN. then you have to execute QA32 and get the lot. make usage decision and there you will find tab with lot quantity. there you have to give qty in unrestricted and save it.
if you dont have it then just do the transfer postingeither through MIGO or MB1B with movement type 321. give the mat. plant str loc. qty and save it.
regards,
Adwait Bachuwar

Move stock between quality and un-restrict

Hi all,
Is there any possibility in moving the stock between quality and un-restrict excluding release production order/ GR PO to get the procedure.
When I use MB1B/MB11 with the correct movement type, the system shows: You can move it in QM only.
My background : I activate the QM view in my system, and activate QM type: 01.04.89 for most materials.
Thx for your information.
Wilson

Hi
If you want to move the stock from QM stock to unrestricted , do not activate QM view.
check the box " Inspection stock" (MARC-INSMK) either in Purchasing view/work scheduling view.
For some materials if you do not want to activate full QM functionality ,but still to inspect visually before accepting at GR stage.
This functionality will be of much use in cae of maintenence items.
Hope this solves your problem.
Regards
YMREDDY

Bapi to move Quality inspection stock to unrestricted stock

Hi All,
I am developing a report where the material batches should be distributed to other storage locations within a plant (as we do it in MB1B with movement type 311).But if that material is in QI stock( inspection lots) then that should be forcibly moved to unrestricted stock.Is there any BAPI available to mimick QA11 and force the material from QI stock to unrestricted stock.
Thanks in advance,
Pramod

Hi Peter,
The requirement is to mimick the transaction QA11.I am all ready using the BAPI_GOODSMVT_CREATE to post the goods from unrestricted stock.But,to move the stock under QI inspection I have to first move it to unrestricted stock and then post it.Is there any other BAPI available for mimicking the transaction QA11.
Thanks,
Pramod.

Error while posting stock from quality to return delivery

Hi ,
I am working in decentralized warehouse. I am posting stock from quality to return delivery in t code QA32. The following is the error message i am getting . i have also checked the movement type settings they are fine for 553.
"Posting only to free or blocked stock due to missing goods receipt".
Please let me know if i am missing any thing in config......
Thanks
Ilyas

Hi Ilyas,
Can you check again the movement type? For return delivery movement type 122 is used and 553 is for GI scrapping from QI. You can check it in SPRO>QM>QI>Inspection lot completion> Define inventory postings.
reg,
Sudhir

Error while Releasing the Stock from Quality-CRTD CHCR SPRQ

Hai Experts
While releasing the stock from Quality i got error like function cannot be caried out,
The Material Status CRTD CHCR SPRQ.
Thanks
Rajakarthik

Rajakarthik
It looks like the status you mentioned are of inspection lot.
CRTD mean created status of inspection lot.
CHCR means characterstics required. in your case the the material master inspection view says characterstics required however your inspection plan does not have any cahracterstics.
assign the characterstics to inspection plan & both the status of inspection lot will change. you will be then able to process the inspection lot to move the stock from quality to unrestricted.
Regards
Mahesh

Block for payment in MIRO if there is blocked stock in quality inspection

Hi all,
In quality inspection, if they put some quantity into blocked stock, then i should go for payment block in MIRO . Here
the QA status may be Pass or Fail.
my payment block will depend upon blocked stock in quality inspection but not on QA status.
Thanks
babu

Hi Pabitra
If the material is taken to QI, then no liability is created for the vendor during GR. Now if you pass it in QA, then the stock moves to Unrestricted stock. Now if you transfer from Unrestricted stock to blocked stock, this will not block MIRO, as the GR/IR has already been hit.
if you bolck payment for these type stock, then you can take help of User Exit, in MIRO
Regards

Stock in Quality

hi Gurus,
Which are the objects in quality management from cutover point of view and how stock in quality (inspection lot) is created in cutover?
VM

Which are the objects in quality management from cutover point of view and how stock in quality (inspection lot) is created in cutover?
The only thing for cut-over from Quality would be that the initial stock is directly taken in Quality inspection, but this is not Inspection relevant. Only for stock status and restricting the usage. When Quality clears it 321 mvt is done to move it to Unrestricted stock after go-live.
Check below thread for more information on cutover activities from QM point of view.
Re: Quality Management - Cut Over
Cheers
KK

How to revert stock in quality stock after qty issued with movemt type 704

Hi Experts,
User issued qty from quality stock to cost centre trough T-Code MI10. Inspection lot against the issue qty has status u201CREL CALC SPCO PRII CROK QLCHu201D This lot has been generated through mov 101 against PO (GR). After doing GR qty posted in quality stock. By mistake user has issued qty from quality stock to cost centre trough T-Code MI10. For same movement type was 704.
Now they want same qty back in quality stock also they want to do UD for the same. How to get back this stock in quality stock?
Awaiting for your expert reply.
Thanks and Regards,
Sandy

hi Sandy,
Quickest and easiest option without lot of configuration and process change for your scneario will be ,
The transaction code is MB0A.
The steps for executing the above trancode is as follows.
Inputs:-
Posting date : UD date.
Movement type : 102
Enter relevant plant, storage location, vendor and the material code
The purchase order/sch.agreement for the given vendor-matl-plant combination will be displayed.
Select the correct PO and click adopt selected.
The material with quantities to be reversed will appear in various line items. Select the correct quantity for which the reversal to be made.
Click adopt + details
Enter storage location
Remove "X" in the stocktype field
Save.
Material document will be generated.
The correct material could be inwarded again and correct usage decision can be taken against this lot.
Get approval from Materials and Finance guys.   As long as your accounting documents nurlifies each other , you should be good to go.
If not you have to use the same proess   witht twiests , with other movement types for which you have activated inspection type.
Hope this helps
Cheers
Rav

How to post stock in quality inspection

Hi all
we want to post stock in quality by using MB1A t_code

Hi,
Activate the QM in Material master for your finished product, as soon as the goods movment is done from PP for the finished prduct the material will move in the quality stock.
Hope its useful.
Reward points if useful.
Thanks..

Inventory Management, process stock in Quality.

Hi,
I am working in WM making the inventory process however I receipt an error when I trying to execute the LI20. The transaction gives this error:
LI20: No destination storage bin to be found in storage type 999
This error appear when there are a material in quality stock. After release the sock by QA11, it is possible to make the movement to storage type 999. My question is if is it possible to make the inventory for stock in quality. I think it is not possible to move the stock when it is in Quality.
Thank you and best regards.

Hi,
Thank you for the replay.
I have already created the interim storage type 999, In fact the process works correctly after make the usage decision by QA11. My question is if it is possible make movements in WM for inventory like this when one of the materials in the storage type is in quality stock. Always give this error.
Thank you and best regards.

Transfer posting stocks from quality inspection to unrestricted, problem

Hello Guys,
kindly help me i am having problems doing transfer posting (mb1b) using movement type 321. because in my stock overview (mmbe) thera are stocks in Quality Inspection, i want that to be trasfered in Unrestricted Stock. that's why i execute transfer posting but there is an error occured doing it so. the error is "change the inspection stock of material 1078 in QM only". how could i make this stocks transfer to unrestricted?
please advise me the correct way to settled this.
thanks and regards,

Hello Guys,
I am very thankful for all of you contributing to this thread of mine hope in some other time you can work it out with me again I already done all this resolutions you have mention and I also know that is all the right wya to solve this issue but i dont see my problem exists on the configuration in material tpye allocation because in our business sample the FERTin standard SAP but with us it is customized name, have different code it was not define in TLtype in material allocation for quality inspection (Q), now i know what to do to call our admin to authorized my config there.
Thank you so much i will closed this thread now please help me in some of other query next time. hehehehe..
Regards,

Transfer posting to block stock through quality notification

Dear QM Experts,
I am trying to post the material from unrestricted use to block stock through quality notification type Q2. Following are the details.
1.     Material is batch managed
2.     Storage location is managed by warehouse management and has storage bin.
3.     Material has split valuation
When I click on link transfer post unrestrictedblock system asks to put storage type and storage bin. Here I enter the appropriate details. When I press enter system throws error message as Enter valuation type as the material has split valuation active. Surprisingly I do not find the option to put this valuation type in Q2 notification screen.
On the contrary when I try to do 344 movment manually through MB1B system gives pop up to select appropriate valuation type.
Requirement is movement 344 should happen through quality notification considering above constraints. How the valuation type to be entered in Q2 notification?
I would be grateful, if someone can throw some light on this.
Thanking you,
Anand Rao

Which valuation category do you use in material master accounting view?
In my experience..
Normally a company use the batch management for split valuation and a valuation type should be input automatically by transaction in batch master.
Therefore when you input a material, plant, batch in notification screen, a valuation type would be selected in background by system.
Anyway try below..
At transaction MSC2N you input a valuation type into batch master then try to transafer posting through notification.
I'm not sure why your batch master does not have a valuation type.
Regards
Luke

QM- Stock en quality inspection

Hi gurús,
Some units of material still been in quality inspection but the used decision for the inspection lot for this material and batch already exist.
When we try to do a 321 movement type from transaction MB1B to move the material from quality to unrestricted stock, the system display the error message "Change the inspection stock of material MP.0V961 in QM only".....But the inspection lot had the used decision already taken
¿How can we transfer the stock from quality inspection to unrestricted stock?
Thanks in advance for the help
Regards
Enzo

Option 1: What you can do is deactivate QM for this material temporary. Move the stock from quality to unrestricted then and activate QM again.
Option 2: Add a new inspection type 04 to the material. When you transfer post the material it creates a inspection lot where you should make a decision for. When you did this delete inspection type 04 again.
Option 3: You have somehow wrong entries in a table. I had the same here, when i wanted to transfer post sales order stock unrestricted with a mvt 311 to another storage location i got the same error.
I created a SAP note for that and this was the reaction:
the error message is indeed not justified.
It is caused by a faulty entry in control table T156M.
Display T156M using se16 with key BUSTM='MAA7'. You get 6 entries.
Change the display in order to show table field LBBSA:
BUSTM ZUSTD CNT02 LBBSA
MAA7 01 01
MAA7 02 02 <<<< wrong! LBBSA should be '01' for this line
MAA7 0 01 08
MAA7 0 02 08
MAA7 2 01 01
MAA7 2 02 02
the same table entry has two more invalid settings, fields SMSKA and
SMSSA:
T156M key BUSTM MAA7
ZUSTD
CNT02 2
->
SMSKA AQ1 -> should be A01
SMSSA ASQ -> should be ASL

Unrestrected use stock to quality inspection stock

Hi,
plz tell me how can transfer Unrestrected use stock to quality inspection stock for same material and same palnt

Hi Prasad, Make sure that inspection type 08 is assigned and activated in Material Master's QM view. Then you would be able to move the stock from unrestricted to quality using MB1B (Mvt/Type 322).
Also check : Stock Reversal - From Unrestricted to Quality
Edited by: m_n_novice on Sep 5, 2009 2:02 PM

Move quality stock to quality stock

Similar Messages

Maybe you are looking for