MOVED: Going over 280 fsb on a K8T NEO2

This topic has been moved to Overclockers & Modding Corner.
Going over 280 fsb on a K8T NEO2

Quote from: quakerjtf on 16-May-05, 04:35:32
Yeah the k8t800 chips can overclock, but they're not as good as nf and you have to use some tricks to get stable clocks over ~2.4ghz. I was finally able to get ~2.6ghz stable at 1.55-1.6V. I won't go past 2.6ghz because of the excessive voltage and I run my crap on cheap stock air. plywood, they don't have a clockgen specifically for msi k8t neo2, but the Asus AV8 clockgen works perfectly: http://www.cpuid.org/download/CG/CG-ICS950405.zip
I've used it before for some xp ocing.
Thanks bud for the info, will try out the asus clockgen and see what's up.
My system is water cooled so no probs with voltage here.

Similar Messages

MOVED: Windows Xp Peo X64 and Via k8t neo2

This topic has been moved to Operating Systems.
Windows Xp Peo X64 and Via k8t neo2

Hello SeanTek and welcome to the Palm forums.
It has been years since I last performed a IR HotSync with a Windows box. It was really slow. I do think that you are on the right track. The trick will be to find a vendor who sells a IR adapter and has a 64-bit Windows driver.
Is running 32-bit Windows XP inside Microsoft's Virtual PC (now free) and option for cabled HotSyncing?
Alan G
Post relates to: Treo 755p (Sprint)

Banner's height shifts and goes over content, only with Firefox browser

This is a random page in my site where the behavior takes place. ( http://accountabletest.com/services/) Notice how the banner's height shifts and goes over content. The issue happens only in Firefox, not in Safari, Chrome or even IE (IE used to make a weird effect too, but when I replaced the % with specific px quantities, the issue stopped). All subpages but the homepage are affected. I don't know why is this happening. The issue takes place in small screens and also in big ones (I use a media query for min-width=144px).

Hi again!
I've arranged the '''DOCTYPE declaration''' and also '''removed the Javascript code''' entirely from the code (''wasn't needed, but was included in the template''), as mentioned by '''@jscher2000''' .
Moreover, I've checked the margin of the div.headwhite2 (margin-top:-5% -> 8%), and '''replaced the % with accurate pxs''', as recommended by '''@cor-el'''. Did also tried switching the banner's heigh (then I returned to how it was, because no changes were seen on the issue).
The problem persists: Banner's height '''switches upon reload '''and the div 'headwhite2' '''moves down''' while moving the poiner over the sidebar's links.

3x LDT with HTT over 270 on k8t neo2

Hello
this is a question for k8t neo2 owners (Via k8t800 pro). Did someone tried to set the LDT multiplier to 3x (600mhz) whith HTT over 270? I have a asus A8V motherboard and the 3x multiplier dosent work above 270 HTT. I just want to know if this is an asus bug or a chipset limitation?
thanks

Your processor, like mine, is probably flaking out and limiting your OC. I'm slowly learning that the nforce is the way to go, higher OC's with tighter memory timings. If you haven't already, go download a copy of clockgen and find the top speeds you can acheive with your memory and CPU frequencies. First; adjust your divider so that your processor has the higher ratio, then use clockgen to inch up the speed until it BSOD's (adjust speed, run a program to test stability), this will give your max CPU HTT speed. Then set your divider to 1:1 and do the same thing, this will give you your max memory speed, unless you reach your CPU cap before your memory goes. You've most likely already done this but if you haven't, you can now. My CPU flaked out at about 237mhz and I couldn't reach my memory cap but all the reviews I've read put it close to 260mhz. (Yes I was sure to make sure voltages and temps were adequate) Good Luck!

Just got my RMAed MB(K8T NEO2-F) back GOING GOOD@264FSB

CAN SOME PLEASE HELP!!!! I sent my old MB (K8T NEO2-F) in because I could not get the MB to reboot into Windows after setting AGP Frequency to 66Mhz. So now I just put the system back together with the MB they sent me and was going to try and OC this 3200+ I have but I put the AGP Frequency to 66Mhz and it would not boot into windows still. Am i missing something here or what? I am supposed to set the AGP Frequenct to 66Mhz to keep my SATA Raid locked right? There are 3 settings 1-Sync with CPU 2-66Mhz and 3-75.4Mhz. Now how can I OC this board this way? That is what I'm supposed to use to lock it right? Is there a special way I'm supposed to do it? I just went in and disabled spread spectrum set FSB to 210 set AGP Frequency to 66Mhz Lowered HHT from 1000 to 800 then saved and it didn't reboot. So I reset the BIOS went in set spread spectrum to disabled set FSB to 215 and set HTT from 1000 to 800 saved and it booted into windows. So the 66Mhz isn't letting this MB boot either. Plus for the CPU VCORE it is set on AUTO and there are no other settings except for AUTO for it.

Guys that is way outdated info on those links and not for this board with the newer CPU's Ignore it.
The K8T800 is a socket 754 board and has no AGP locking. This can't be fixed as Via has an issue with that chipset and that is where the problem is not in the Bios.
The K8T800 Pro is the socket 939 board but you must use 9.x for any of the newer CPUs beyond Clawhammers, Newcastles and Winchesters. These have locking that works and can be confirmed. However there has been a couple reports of ATi cards that don't lock using this board.
The X2's and the Opties must use socket 9.3 to operate correctly.
There have been a couple folks now with ATi 9xxx cards that have reported troubles with the locking on the Neo2 boards. No idea what will fix it as there was never enough complaints to isolate the problems and I am still trying to gather enough data on it. Some ATi 9xxx cards work and some don't I do not have enough info to check further.
The only thing I can tell you is to report the issue to MSI who may or may not be able to sort it out. Again there is very little info on this particular problem.
There are no modded Bios's for that board that I have found. Yes I looked. I am not sure a modded Bios would solve this anyways unless there was more info on what the cause is. You need to know more than one or two cards won't lock. Most cards do lock and everything is fine. So there has to be something odd about those cards that don't that is different from the rest that causes this. However I don't have that info so even passing this on helps veryu little.
I am still gathering data but as there are fewer and fewer folks that have the right combo of parts that show the problem there is likely not going to be enough data to finds the problem.

Can I transfer pictures from one iPad to another without going over iTunes?, can I transfer pictures from one iPad to another without going over iTunes?

can I transfer pictures from one iPad to another without going over iTunes?, can I transfer pictures from one iPad to another without going over iTunes?

Yes, use 3rd party apps like Photo Transfer App.
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/69507ce7f854c405f54 77bea99f4d498.jpg
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/79b3173fda7b6a6e148 5b463198f6acf.jpg

I want to know how to get the web addresses to go away that appear in the bottom left corner of the browser every time my mouse goes over a link

Any time that my mouse goes over a link on a web page a little box in the bottom left corner of the browser pops up showing the web address for that link and it is really annoying, especially when i am on facebook because there are so many links on the home page i cant move my mouse anywhere without that box popping up and blocking part of my conversations. I was wondering if there was any way to turn this off. I've checked through the options and to my knowledge there is no way to turn it off. Just wondered if anyone else has had this problem or knew if there was a way to get that box to go away.

Another option would be to use the following extension to push those messages into the status bar. It could be a convenient way to have your messages visible when you want them, but with less distraction.
https://addons.mozilla.org/en-US/firefox/addon/status-4-evar/
If you try it, let us know what you think.

HT1343 On my 4 1/2 year old Macbook I could select multiple files by highlighting a file and then moving cursor over a file lower in the list, and pressing shift-control-click. I can't do that in now with Mac Pro. What am I doing wrong?

ghlighting a file and then moving cursor over a file lower in the list, and pressing shift-control-click. I can't do that in now with Mac Pro. What am I doing wrong?

Holding down the control key will invoke "right-click."
Depending on the View, holding down Shift will with either toggle the selection (Icon View), or it will make a continuous selection from the previous selection (List View or Column View).
The only way to make a continuous selection in Icon View is to drag out a selection marquee around or through the icons.
I can't remember the behavior of previous OS's.

He XML message is going over to SRM from XI , but getting an application error (Exception) when checking in sxmb_moni on the SRM side

hi experts ,
we are using classic scenario (ECC 6.6 & SRM 7.0)
we have are configured Procure-to-Pay Scenario ,Note 1263876 - SAP SRM: Configuration of Procure-to-Pay Scenario.
but facing issue.
The XML message is going over to SRM from XI , but getting an application error (Exception) when checking in sxmb_moni on the SRM side. So we are not able to see the PR in the Sourcing cockpit in SRM.
error as below
<SAP:Category>Application</SAP:Category>
<SAP:Code area="ABAP">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="http://sap.com/xi/SRM/SE/Global">ExchangeFaultData</SAP:ApplicationFaultMessage>
<SAP:Stack>Application has thrown an exception</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Hi Vijay,
Can you tell us the interface name?
If it is stuck in FEH (Application Error) in SRM then you can check the detail error by going into tcode /n/sappo/ppo2.
You need to enter the Business Process, Order Assignment and Mode Of Postprocessing Order and then execute.
It will show you all the messages stuck in application error for that interface and if you double click on any one of them you will get to see the detailed error with options to Discard, Repeat etc.
Let us know if this helps you.
Regards,
Mayur

Why is the text going over the image????

Please refer to video here http://www.youtube.com/watch?v=2rN6Ndm9sFo&feature=youtu.b
Why is the text going over the image when the text layer is below the image layer?? It is so frustrating.

Are you sending the texts to his phone number or his Apple ID? It might be that the texts originated from your phone is to his Apple ID and not his phone number and his Apple ID was not registered for the Message app on his phone. So any texts to his Apple ID is not received by his phone.
Can you receive his texts? If yes, then reply back from what he send you and see if he can receive the texts.

Why is the mainscreen/stage moving all over?

Hello All, it's me Mr. Whinie again with yet anouther "problem"
CP6 Mac when I duplicate an item or save, the "stage" moves to a different part of the open window, many times leaving only a small bit visible and forcing me to reposition it to see the whole screen. WHY?
Now for those of you that have messaged me because I'm "whining too much", I have used Adobe products since 1990 and have used numerous versions of all of their programs including Director and Flash and have been a giving comminuty member helping others for pretty much all of those years.
If you look at my posts the things that I am "whining" about are simple things that should have, IMHO, NEVER made it to a release state. The Groups, constantly expanding in the timeline, the multiple levels of "backgrounds", the seemingly extreme lack of Javascript documentation or even debugging, the inconsistant interface with other Adobe products and now the stage moving all over the place are simply things that should have been addressed.
I have no problem paying for software, but with the new advent of "cheap" software available, when a company like Adobe charges a premium for software, then IMHO it should be EXTREMELY well tested and documented. They should also allow the purchase of a pervious version for at least 6mo. until all the kinks of the new release are worked out by those that want to fight with the newest release.
Any insight on how I can stop the above would be welcome.
Thanx,
Greg

Lieve, do you also use an external mouse? If so, you may want to consider trying to configure the laptop so that the touchpad is disabled when the mouse is present. Many laptops will allow you to do that.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Satellite C660 - Touchpad highlighting everything it goes over

I have a problem with my Satellite C660 with the Synaptics touchpad V7.2 sensitivity. The cursor keeps highlighting everything it goes over and dragging the files or programmes or opening them.
It's driving me mad and restoring it to a previous date doesn't stop it, nor does clicking the tapping function off in the Synaptics properties box or reverting to default.
Anyone out there able to help?

Hi
Try to install the Synaptics latest driver from the Synaptics driver page:
http://www.synaptics.com/en/drivers.php
Furthermore you can adjust the touchpad settings in control panel -> mouse -> device settings -> settings button
Here you would find lot of different options which would improve the touchpad functionality.

Anyone going over their Data now that they have a Samsung S5?

I just recently (3 weeks) purchased a Samsung S5 and it shows I am using Data when I am positive I am connected to WIFI (such as I am at home and I know our WIFI is working). We're going over our data limit for the first time ever. It even shows data usage this morning while I was at home and again...the wifi is working at home. Anyone have any answers?

Go into Settings ... Data Usage, and look at your Mobile data and wifi usage. Which apps are using the mobile data?
We have 4 lines on our family plan, and over the years have had several smartphones (iPhones, Blackberry, Android and Windows phones, various models). Only once did I see a data "spike", when my daughter first got her iPhone 5C. It was gobbling data, till she went into her app list and shut off the data for lots of things.
Whenever we get a new (smart) phone, I typically don't activate it until I have used wifi to download all my apps and get my email hooked up. Once it all works on wifi, then I'll activate the new phone. I make sure my apps are set to update over wifi only (it may be a setting within each app), and my photos are backing up over wifi only. Facebook now auto plays videos, and you need to change the setting to play videos on wifi only. Same with email - set it to down load attachments over wifi only.
There are lots of ways data your device can use data; finding out which apps and what processes are the culprits (by looking at the data usage on the phone) can help you to use your data allotment most effectively.

I am trying to sync my music library to my new iPhone 5C and cannote seem to get the music to sync. It is in the library but isn't going over to my phone.

I am trying to sync my music library to my new iPhone 5C and cannot seem to get the music to sync. It is in the library but isn't going over to my phone.
I must be doing something wrong during the sync (something checked when it should not bet, etc) Need some help. Thanks!!

Manually manage music is NOT checked. I backed up all my phone information from my old 3GS phone to my computer, then connected my new phone to sync. Everything else seems ok but music won't transfer. It is set to automatically sync when connected.

Problem going over a Set in java 5.0

Hi Guys!
I'm "translating" working code in NIO to the tiger version, and i'm having trouble with going over a Set returned from select().
Runing the following code fails on iter.remove() and i get a java.lang.UnsupportedOperationException. Couldn't find an example that work.
for (Iterator<SelectionKey> iter = connectionSelector.keys().iterator(); iter.hasNext();)
            SelectionKey key = iter.next();
            iter.remove();
            if (key.isAcceptable())
                handleAccept(key);
            else if (key.isReadable())
                handleRead(key);
} Thanks for any help,
snayit

You will probably find that the collection is an unmodifiable version. From the 5.0 API
http://java.sun.com/j2se/1.5.0/docs/api/java/util/Collections.html
Collections.unmodifiableCollection(Collection<? extends T> c)
Returns an unmodifiable view of the specified collection. This method allows modules to provide users with "read-only" access to internal collections. Query operations on the returned collection "read through" to the specified collection, and attempts to modify the returned collection, whether direct or via its iterator, result in an UnsupportedOperationException
Check the Set and Iterator implementing classes using:
System.out.println(mySet.getClass().getName());
System.out.println(mySet.iterator().getClass().getName());Cheers, Neil

MOVED: Going over 280 fsb on a K8T NEO2

Similar Messages

Maybe you are looking for