Moving data between two blackberry curves

Please help - I am trying to move from one blackberry curve to another and cannot see how to transfer my info from one to the other - I tried through the desktop manager's backup and restore but it does not want to co-operate.
Solved!
Go to Solution.

Can you be more specific about what the problem is?
Assuming you don't want to use both at the same time, you should use Desktop Manager's Device Switch Wizard anyway. It will automatically back up your old Curve and restore it to your new one.
Jerry

Similar Messages

Moving data between two schemas

I need to move data between to schemas. I have a created packaged code to accomplish this. The problem is the execution time. When running the insert statements from the source schema to insert data into the target schema, it takes considerably longer to complete the statement than if I copied the tables from the source schema into the target schema and executed the same statement in the target schema. Any insight as to why this might be?
Also all data resides on the same physical disk, running version 10g on a W2K server.
Thanks in advance
Here is a sample of one of the insert statements:
INSERT INTO target_table(tt_id, tt_disp, tt_date, tt_emp_1, tt_emp_2, tt_emp_3)
SELECT src_tab.src_id,
src_tab.scr_disp,
src_tab.scr_date,
src_tab.scr_emp_1,
src_tab.scr_emp_2,
src_tab.scr_emp_3
FROM
(SELECT
row_number() over(
ORDER BY SUBSTR(fn_cil_sort_format(SUBSTR(src_cil,
1, 8)), 1, 4), SUBSTR(src_cil, 4, 8)) AS src_id,
scr_disp,
fn_date_format(date_time) AS scr_date,
v_convert AS scr_emp_1,
v_convert AS scr_emp_2,
v_convert AS scr_emp_3
FROM source_table
ORDER BY SUBSTR(fn_sort_format(SUBSTR(src_cil, 1, 8)), 1, 4),
SUBSTR(src_cil, 4, 8)) src_tab
WHERE scr_disp IS NOT NULL;

In addition to the above post, you should create the table initially with NOLOGGING. create table as select has the ability to bypass logging. This should increase performance very much. No log writes will have to be taking place.
Lee

Between the Blackberry Curve 3G and the Bold 9700

I am confused between the Blackberry Curve 3G and the Bold 9700. Please guide me with the difference in features,options,performance,display.... which one is advisable...

The 9700 has 3g
9700 has a better camera and a flash
9700 has GPS
http://na.blackberry.com/devices/compare/
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

This message is used to carry data between the BlackBerry handheld and an associated server.........

Hi everyone,
I am having issues with a couple of BlackBerry's, where they are receiving a message on their phone saying:
"This message is used to carry data between the BlackBerry handheld and an associated server. Please do not delete, move or respond to this message - it will be processed by the server."
Email is from "[email protected]"
This has only appeared since installing the BlackBerry Desktop Software version 6.
We have used the link below which resolved the issue on one of the BlackBerry's but on the other neither of the options are there.
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB04254&sliceId=SAL_Pub...
The link I have just posted references to version 5, just wondered if anyone knows how to resolve it in version 6 or some other option. Original email is still received fine but want to stop the other email about "This message is used to carry data between.......".
Thanks in Advance.
Kevin

An alternative, if you cannot stop it via the two recommended fixes, is to send those messages to your jiunk folder at the email server level so that they never reach your BlackBerry...
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How do you find the average value of all the data between two points on a single channel

I am tring to calculate the average value of all the data points on a single plot between two seperate points
I have attahced an illustration.
Tim
Solved!
Go to Solution.
Attachments:
plot.jpg ‏173 KB

Hey smoothdurban,
I've seen Brad's code, and trust me, it's worth the effort to let him help you get it up and running - it's definitely the most ideal way to solve this problem. However, as Brad said, there are multiple ways to tackle this - both interactive and programmatic - so in the meantime, I'll take a second to detail one of the interactive and sure-fire ways to find the average of data between two points on a single channel.
We'll use"Flags." Set up your VIEW graph exactly as you did on your original screenshot, using Band Cursors to approximate the beginning and ending X-values representing the range you want to examine. Next:
1. Click the "Set Flags" button () that is a part of your 2D Axis System. Note that you can hold down the Shift button if you ever decide you want to do this on more than a single curve at one time.
2. Select the "Flags: Copy Data Points" button that enables after Flags are set.
3. This creates new channel(s) in the default (bold) group in the Data Portal that contains only the Flagged data.
4. Select DIAdem ANALYSIS.
5. Select Statistics » Descriptive Statistics.
6. In the Channels input, select the newly created channel containing your Flagged Y-Data.
7. Ensure that the Arithmetic Mean parameter is set. You can preview the data and the result in the dialog before pressing OK to execute the calculation.
You may have noticed that in the Descriptive Statistics calculation, one of the parameters that you can set is the range of channel rows to operate on - so, if you know the row numbers of your beginning and ending X-values, you could just simply run the Descriptive Statistics calculation and use this parameter to operate on a row subset of your original channel instead of the entire channel.
Derrick S.
Product Manager
NI DIAdem
National Instruments

How can I share data between two forms on different lists

Using a custom content type, I created two lists that I want to share the same data - one is a calendar. Our employees complete a form from the "Out of Office Request" list that has workflow functionality that sends an email to that person's
manager. If the manager approves the request, the item automatically populates the "Out of Office Calendar." The problem is that the only information from the request list that populates the calendar is the Title field and date/time fields.
I need the manager name in order to create a view for each manager.
How can I connect the other information in the request list to the calendar list. It seems to me that if the title and date fields carry over the information, there should be a way to connect the other information. I'm using Designer.
I've tried to connect the two lists' webparts with the wizard, but when I get to the page that maps the two lists, there are no column names and the "Next >" button is grayed out. This seems like the logical place to connect the two lists,
but it isn't working.

Hi,
According to your post, my understanding is that you wanted share data between two forms on different lists.
To show external information on the calendar event, there are two methods: Calculated column, workflow. You can refer to:
A Simple Guide to Show More Information on a Calendar Event
I recommend to use workflow to achieve what you want. But you need to create a people column to display the manager.
You can create a workflow associated to the "Out of Office Request" list, add action to Start Approve Process. If the manager approves the request, you can create a item in the calendar, and then update the people column and the title column.
Then the calendar will display the Title, date/time and the manager.
To create a view for each manager, you need to modify the Filter. You can use the people column is equal to the manager name or the Title contains the manager name.
Thank you for your understanding.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Different ways to copy data between two schemas in one instance

Hi there,
I am searching a good way to copy data between two schemas in the same instance.
Both schemas have an identical structure such as triggers, tables, views and so on. The only difference is the purpose: one is the productivity system and one is for development.
I looked at datapump but I do not explicit want to export / import. I want to keep the data in the productivity schema as well as copy it to the other schema. Any ideas? I found out there is a copy statement but I dont't know how that works.
Thank you so far,
Jörn

Thank you for your replies!
I also thought of creating a second instance for development and move the dev - schema to it. I just don't know whether our server can handle both (performance?). Anyway the idea is to have a possibility to quickly rebuild the data inside a schema without indixes or triggers, just pure data. I thought the easiest way would be to copy the data between the schemas as they are exactly the same. However if you tell me DataPunp is the best solution i won't deny using it :).
When you export data a file is created. does that also mean that the exported data is deleted inside the schema?
best regards
Jörn
Ps: Guido, you are following me, aren' t you? ;-)

"Message is used to carry data between the BlackBerry handheld and an associated server"

Hi everyone,
I'm a first time poster!
I've been receiving about a 100 of these emails everyday for over a week now!
Bell mobility and Bell ISP both say it's not their issue or problem to fix and told me to contact the other!
The e-mails are orginating from:
[email protected]
Any suggestions?
Please help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
This message is used to carry data between the BlackBerry handheld and an
associated server. Please do not delete, move or respond to this message - it
will be processed by the server.
BEGINETP 116
AdxV+90AAAAAIBAIMzAzQUM3MUQgGWZyaXp6ZWxsQHBlaS5zeW1wYXRpY28uY2EAI/HrYFAF
Q01JTUUDQICAgIAyAAAwOENGOEQ3NkIrRysxALbQEVSv1zvyA8fJF15bAW0AGb/C87pyXKXe
k+KxQN/Inek!
ENDETP 70196029
Message Edited by Frazzledazzle on 09-17-2009 11:44 AM

HI and Welcome to the forums!
Here are several KB's that discuss the issue...hopefully one of them has what you need:
KB04254 Network@etp email messages arrive on the BlackBerry smartphone
KB10289 What is a Network@etp message
KB13551 Receiving both email messages and network@etp email messages on the BlackBerry Smartphone
KB12643 ETP messages are not deleted from the Inbox after delivery to the BlackBerry smartphone
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How can I get extract the data between two cursors on an XY graph

How can I get extract the data between two cursors on an XY graph

Well, you say xy graph, so this might be a more complicated problem.
For a waveform graph it's trivial. Simply get the two cursor indices (property: cursor index) and apply them to array subset of the data. Is that all you need?
Here's how the above code would look like. using cursor.index instead of cursor.x elimnates the need to include scaling information.
For an xy graph, there could be multiple segments (e.g. imagine a spiral that passes the desired x range multiple times from both sides). This would neeed significantly more code for a general solution.
Message Edited by altenbach on 11-24-2009 07:53 AM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
cursorsubset.png ‏17 KB

How to compare data between two tables?

Hi,
My team is trying to develop a SAP data migration tool (DMT) using ABAP.
One of the functionalities in the DMT is to validate the data in the staging area against the loaded SAP data.
The tables in the stagin area are customer tables (i.e. user-defined tables starting with Y, Z).
How do I compare the data in the staging area against data that are loaded into SAP tables? Are there some built-in SAP functions to do this? Or, are there some better ways of doing this (e.g. instead of comparing against data in the SAP tables, we compare with some INTERNAL tables)?
Any help would be greatly appreciated, thanks!

Hi Kian,
Use <b>SCMP</b> transaction to compare data between two tables and you can not use this for comparing internal tables.
Thanks,
Vinay

What are the steps for using the backup files to reload data to my blackberry curve (8310, i think)?

What are the steps for using the backup files to reload data to my blackberry curve (8310, i think)?

Connect BB to PC. On 'Desktop Manager'>Backup & Restore tab>Click Restore. Double click .ipd file (backup file created from Desktop Manager).

Hide values in URL, passing data between two webdynpro(ABAP) applications.

Hi
   When transferring the data between two webdynpro applications, How to hide the values in URL.
Example : First application is using for login
                Second application is for some transactional screens.
Based on first application login data second application should trigger. When passing the user id and password thru URL every one can see the user name and password at internet explorer, so how to hide that user name and password in URL.
Thanks
Murali Papana.

Hi Lekha,
    Thanks for your reply, but I could not find parameter like visibility, andi found HAS_TOOLBAR but no use.
I set it like
CALL METHOD lo_window_manager->CREATE_EXTERNAL_WINDOW
EXPORTING
    URL            = 'http://*****:8000/sap/bc/webdynpro/sap/Y1app1/?sap-language=EN&sap-client=200&sap-user=1104&sap-password=abcd'
    MODAL          = ABAP_FALSE
    HAS_MENUBAR    = ABAP_TRUE
    IS_RESIZABLE   = ABAP_TRUE
    HAS_SCROLLBARS = ABAP_TRUE
    HAS_STATUSBAR = ABAP_TRUE
    HAS_TOOLBAR    = ABAP_FALSE
    HAS_LOCATION   = ABAP_TRUE
RECEIVING
    WINDOW         = lo_window.
Thanks
Murali Papana.

This message is used to carry data between the BlackBerry handheld and an associated server. Please do not delete, move or respond to this message - it will be processed by the server.

I have a client with a BlackBerry Pearl 8110. It was (is) configured to receive email from a Microsoft Exchange Server via his Outlook account. I have uninstalled the Desktop Manager and re-installed ensuring the computer transmits his email via the Re-Director. All settings in the Desktop Manager are correct. The phone was working fine for over 5 years. Now he is getting emails both on his phone and in Outlook saying:
This message is used to carry data between the BlackBerry handheld and an associated server. Please do not delete, move or respond to this message - it will be processed by the server.
I have verified that his phone is not attempting to perform the Enterprise Activation process by checking :
Options > Advanced Options > Enterprise Activation.
He does however have a Service Book entitled "CMIME"
How can I resolve this issue?

Is the user needing the Redirector service?
Step 1: If you're not using Redirector or Enterprise, you should uninstall Desktop Manager and then reinstall it using the BlackBerry Internet Service option.
Step 2: On your device, go to: Options > Advanced > Service Book, and delete all service books for [Desktop]
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Query the data between two tables

Need help for query the data between two tables
Table 1: Time sheet
P.ID      P.Name EmpID HoursSpend DateTime
c12234  Test      25        4                06/12/2013
c12234  Test      25        7                06/13/2013
c12234  Test      25        8                06/15/2013
c12234  Test      5          3                06/21/2013
c12234  Test      2          5               07/15/2013
c12234  Test      25        4               07/21/2013
Table 2: cost table
EmpID FromDate       ToDate         Rate
25         05/01/2013    06/30/2013    250
2         04/01/2013    05/31/2013      150
25         07/01/2013     09/30/2013    300
Output
P.ID      P.Name EmpID HoursSpend DateTime      Rate   Total (HoursSond x Rate)
c12234  Test      25        4                06/12/2013    250     1000 (4*250)
c12234  Test      25        7                06/13/2013    250      1750
c12234  Test      25        8                06/15/2013    250
2000
c12234  Test      25        4              07/21/2013     300
1200
c12234  Test      2          5              07/15/2013    150
750
===========================================
Total                          28
6700
============================================
Here EmpID =2 don't have rate in the cost table on july month should be pick from last entry from cost table.

Hi Gopal,
According to your description, it seems that the output needn’t include the row when EmpID=2. Because the DateTime for it in Table1 doesn’t included between FromDate column and ToDate column. After testing the issue in my environment, we can refer to the
query like below to achieve your requirement:
SELECT time.*,cost.EmpID,cost.Rate,(time.HoursSpend * cost.Rate)as [Total (HoursSond x Rate)]
FROM [Time sheet] as time
INNER JOIN
[cost table]as cost
ON time.EmpID = cost.EmpID
AND time.DateTime BETWEEN cost.FromDate AND cost.ToDate
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

SQL - Can u print all the dates between two given dates (Without PL/SQL)

Hi Friends,
I want to know if u can print all the dates between two given dates without using pl/sql.
date1,date2 are given
write a sql statement to display all the dates lying between those two dates.
An earlier will be appreciated.
Thanks in Advance
Sriram
null

Sriram,
Try this....
select to_date('01-JAN-00')+to_number(rownum)
from all_tables
where rownum < to_date('10-JAN-00')-to_date('01-JAN-00')
TO_DATE('
02-JAN-00
03-JAN-00
04-JAN-00
05-JAN-00
06-JAN-00
07-JAN-00
08-JAN-00
09-JAN-00

Moving data between two blackberry curves

Similar Messages

Maybe you are looking for