MP3s sound slow and out of t

Since re-installing my SB Li've 5. digital soundcard, all my mp3 files sound slow and out ouf tune, especially at the beginning of songs. I've had the same card installed for about the last nine months with no problems, but yesterday had to install a fresh version of Windows so had to re-install all the drivers etc for the soundcard and since then it has had this problem. It seems ok with wave files andp laying from cds. Is this a known issue with SB Li've, and does anyone know how I fix it.
Cheers
Kaski

By default, Firefox should use your phone's normal Downloads folder. I don't know whether you can change that, but you can have Firefox use a different one.
(Note that this is specifically for downloads, and doesn't affect Firefox's cache of pages or other data, which can be pretty voluminous. I don't know whether there is a way to move that main data folder.)
Changing the download location on Firefox for Android requires a visit to the about:config preferences editor. You have to change two different settings to make this work.
''First, you need to know the folder path you want to use. An app like ES File Explorer File Manager will be helpful if you do not have a file manager.''
(1) Open a new tab to '''about:config''' (type about:config in the Awesomebar and tap the go arrow or tap Enter).
''You may want to bookmark this for easier future access.''
(2) In the search box, type '''down''' and tap Enter
(3) Scroll down to '''browser.download.folderList''' and tap Modify, then change the value from 1 to 2 (from "default always" to "last used folder"). The change should appear after a few seconds.
(3) Scroll back up and tap the large "+" button to the left of the search box to add a new setting
(A) The name of the preference should be '''browser.download.dir''' (this stores the last used directory)
(B) On the right side, tap Boolean and in the popup change it to String
(C) The value depends on the folder you want. For example:
/sdcard/FxDown
(D) Then click Create (if you are too slow, it may clear and you might have to start again)
If you switch back to your other tab and download something, it should go to the new folder.
Any luck?

Similar Messages

Since updating to iOS 6, my 4th gen iPod touch, and my 3rd gen iPad has sound in and out. Sometimes it's on, and then all of a sudden, no sound. I've tried everything from restarting to fully resetting each one starting fresh, but nothing. Please help.

Since updating to iOS 6, my 4th gen iPod touch, and my 3rd gen iPad has sound in and out. Sometimes it's on, and then all of a sudden, no sound. I've tried everything from restarting to fully resetting each one starting fresh, but nothing. Please help.

I have exactly the same problem. I have tried almost everything and I am nowhere near an Apple shop as I am working in Africa.
Did you manage to find a solution? Help please if possible. Regards Az

ThinkPad T510 type 4313 Windows 7 64 bit- sound in and out

Hi,
I bought my ThinkPad T510 in March 2011, had purchased a 1 year warranty, which has expired. My sound issue started almost 2 months ago. While watching DVD's, videos online at any site from yahoo, facebook, youtube, netflix, hulu etc my sound will stop completely while the video still runs. I have to press the volume buttons on the keyboard either up or down to turn the sound back on temporarily. The sound may come back on for 15 minutes or 5 seconds. Sometimes the volume buttons are not effective and then I have to click on the speaker button in the bottom right hand side of the screen to manually slide the volume button up or down.
It seems like such a small problem with an easy fix, but it is extremely frustrating when watching for example, a 30 second video and having to hover over the volume button.
I've tried everything.
- Called Lenovo for support or direction for this quick fix that should be available (I can't be the only one with this issue, because I've never had this problem before). This issue isn't familiar, I can ship it in, and possibly pay up to $600 for them to locate and fix the issue.
- Updating the Conexant drivers
- Removing current driver and having it auto reinstall most up to date driver
- trying the diagnose & fix app on here which found nothing wrong
- Ran my Norton virus check
- removed all cookies and history
- Updated the conexant drivers from the Lenovo Support tab
- Used monthly Norton phone support 3 different times to diagnose and fix the issue
I am at a loss, please help.
I've been told it could be a hardware issue or the VOIP may need to be turned off. Norton cannot touch "the brain"over the phone

Hey Soundless,
Have you updated your BIOS to 1.52?
Try to find older audio driver versions and see if it works.
Also, check in Device Manager under your audio devices and make sure that you don't have any audio drivers conflicting with each other.
Be AWESOME Everyday!
Donate KUDOS and Click "Accepted Solution"
Did someone help you today?
Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"
This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

All podcasts sound slow and and a played with echos after upgrading to 3.0

Hi everybody, after I upgraded to 3.0, all my voice files (e.g. podcasts) are played slowly and with echos. I reset the device to factory settings and re-synched (this took almost two hours), and the effect is still there. The sound files are OK if I play them from itunes. Did anybody else meet this phenomenon? Can I downgrade to solve it? Any advice is welcome.
Regards
M.

Sounds like you have the additional podcast control set to play at 1/2 speed. Tap the now playing screen to bring up the controls and tap the playback speed control under the right end of the scrubber bar until it turns white and reads 1X.
See this for a picture: http://www.apple.com/iphone/how-to/#ipod.podcast-and-audiobook-controls

Fading sound in and out in a slide

Hi everyone,
I was trying to set a sound file to start with a fade when a certain slide starts, and to fade in when I click to exit the slide.
The start and stop audio builds don't seem to do the trick.
Is it possible to do this without going to garage band or other external software to edit the sound?
Thank you in advance for your help
Carlos

at a minimum, apply the stop() method to your soundChannel.
you should also ready you sound for gc though there's no guarantee
it will be gc'd.

Video runs slow on firefox and out of sync with audio with abode flash 12.

Ever since I installed adobe flash player 12 my videos run slow and out of sync with the audio it is like it pauses for a couple seconds and starts back working and keeps doing that.

Hi jth10,
The troubleshooting steps provided by Adobe can be found here: [http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_For_Windows_users]
* Are there any settings in the Flash settings manager that changed when you updated? [http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager03.html]
*These are the recommended settings for specific resolutions [http://helpx.adobe.com/flash-player/kb/poor-video-quality-flash-player.html]
You can also try to disable hardware acceleration in the Adobe settings menu.

Converted song sounds slower than original

I have a song in WAV format, and when I try to convert it using the feature in itunes to do so, the song sounds slower and the original and is listed as being more than 2 minutes longer than the original. I've never tried using the convert to MP3 function before, so I'm not sure where the problem might be.
What can I do to make it sound the same when I convert it to a different format?
Mac OS X (10.3.9)

That might be a problem, since 96 kHz is a very high sample rate--great for recording, but not usually used for final export. Maybe iTunes doesn't recognize it.
I looked in the custom mp3 conversion options in iTunes. The highest bit rate listed is 48 kHz. So it may be that if you had iTunes set to for "auto" sample rate (the default setting, which is supposed to use the same sample rate as the original file), it couldn't actually make a 96 kHz mp3, and made a 48 kHz file but didn't cut out any samples.
Can you re-export the file from your recording software at either 44.1 or 48 kHz? If not, you could try using either QuickTime player or, better, an audio editing application (like Peak) to downsample your WAV.

Windows 10, Build 9926. No MP3 sound

Whenever Windows Update runs, it ruins MP3 sound. Sound works throughout my system, but not MP3.
I have tried ALL drivers for my mother board. I have a Gigabyte 970A-UD3P and the drivers for MP3 sound, just do not work. I have noticed that I have 2 SPDIF options, one TX0 and TX1. Having TX0 as my main playback device gives me Windows sound, sound through
YouTube but no MP3 sound. Which Windows Update can I delete to give me back my sound since no drivers seem to work?

I had some trouble getting sound into and out of Cortana. For diagnostic purposes at least perhaps you could try the solution to my Cortana problem. If this solution works then the problem I ran into is more general than I thought.
Install a new sound driver. Install one that is obviously wrong and you are sure will not work. Reboot. Reinstall the correct driver. Reboot.
I am not expecting this to work but it will provide another data point that may ultimaltely lead to a solution to your problem.

X-Fi and sound slow-down/speed

For a while now my X-Fi Fatality with up to date drivers has some weird problem. It may sound two-fold, but I think the issue is related to the same problem.
In my favourite media application, MediaMonkey, I play my mp3/m4a files and sometimes it suddenly starts to play a file at double, or more, speed. If you're old enough to remember Alvin and the Chipmunks, well, it's close to that. If you then double click another file, it will play it at normal speed, click another file again, and back to the double speed. I think this is an important fact of the problem, which I will explain down below.
Now recently a second phenomenon started occuring (I do not think I have noticed it before) while playing World of Wacraft. When I have alt-tabbed to the desktop and started some background music (not sure if this causes it, or merely the alt-tabbing) and go back to WoW, sometimes it starts to play samples within the game at half or slower speed (I also suspect higher speed too). Now, part of the game are still using sounds that are normal and some others are getting played back at slower speed. Again this is important.
What I think is happening, based on my (limited) experience working on audio drivers for BSD, is that one or more channels of the sound card are being set to a wrong playback speed. This makes sense if you keep in mind that for the media player it will start the playback of the next song on another channel. This theory gets more support if you understand how games generally deal with audio playback. You have a number of channels, one or more used for music, and others for various sample playbacks (such as weapon sounds, enemy or your own shouts/pain sounds/grunts). In WoW this shows with certain spell effects or voices from your characters, you either hear 'this spell is not ready' in a very slow, low way or with certain weapons hits it sounds incredibly short, as if it 'pops'.
Only reason I am now posting is because a friend of mine got an X-Fi yesterday, installed it and the latest release drivers and today complained to me that her media player was playing audio at double (or more) speed. So I am much more convinced it is a driver issue that's causing this.
Anyone else experiencing this? I saw some forum posts and sounds that some beta driver in June/July fixed this, but I have been diligently tracking the release drivers (I haven't tried the current beta yet) and for me the problem is not fixed, not for my friend.

foundy wrote:
ok so i use a berhinger euro rack pro mixercool edit pro and sound forge 6 softwarei dont seem to be able to get decent mic levels without pushing all sliders near top.i use sure and sony dynamic pro micsdo i need to jumper the i/o dri've for the mics
Hmm... there are so many euro rack pro models available ... but, in generally, if you plug the mic into behringer (XLR) and then record it through X-Fi line in (as I guided earlier), you should get + 60dB gain for microphone already in behringer .. this should be enough (max output from Behringer is 28dBu if you connect the mixer to X-Fi through Main outputs).
Are your microphones stereo or mono? If stereo then, is the X-Fi Mic input stereo too?
Also, you need to remember; when you record using non-ASIO software (as like cool edit) you set all 'internal' signal levels (source/recording levels) through X-Fi mixer software (creation mode) in any case. For microphone (if you connect directly into card, there maybe is +20dB boost option available (X-Fi Mixer). Working in ASIO driver mode, you should get highest levels. I can't remember if SF6 supports ASIO fully ...
If there is this jumper for two different michrophone types (like there was in some earlier SB cards), you'll find all necessary information on this matter from X-Fi User's Guide.
jutapa
EDIT:
This is the way I have connected my small mixer (PHONIC MM502, different from the one in the picture) into this PC w/ AP92:
src="http://img42.imageshack.us/img42/26/mixertocardvj5.png">
In picture, for soundcard #4 is Line-Out and #5 is Line-In.Message Edited by jutapa on 02-02-200705:0 PM

Problems fading sound clips in and out in iM 6 HD

I have imported a MP3 music clip into my movie timeline. It plays fine on playback.But when I share with iDVD, and test it on my computer or a DVD player the fade in/out on that specific spot is very abrupt and erratic and sounds quite terrible. I have tried changing frame rate settings from 29.97fps to 25 fps ( We run PAL and not NTSC) here in South Africa. I've even tried importing the original MP3 as an .AIFF and even a Quicktime movie from Quicktime Pro. After writing the DVD, the fade ins and outs sound terrible, no matter what I do.
out of options

Hi Squid, welcome!
You can't use PAL at anything but 25 fps!
How are you setting the fade? Usually one 'extends' the timeline and manipulates the volume there.

IMac CPU3.06 GHz Intel Core 2 Duo, 8GB, Extremely slow and repeatedly "out of Memory" since migration from Mountain Lion to Mavericks

Dear Apple Support Community.
As mentioned by a number of users reporting the same problem, my 2009 iMac CPU3.06 GHz Intel Core 2 Duo, 8GB RAM, has become extremely slow and repeatedly "out of Memory" since it was migrated from Mountain Lion to Mavericks (OS 10.9 then OS 10.9.1).
I have already run CleanMyMac, deleted 5GB of useless stuffs, which did not translate into any improvement. Following the advices collected in other Apple Support Community threads, I have applied EtreCheck the outcome of which is provided below.
For information, I have also upgraded my 2011 MacBook CPU2.3 GHz Core i7, 8GB which became only a bit slower than before, sometimes freezing which it almost never did before. However, I am used to the fact that Mac get usually slower and more prompt fo freeze after upgrading to a more recent OS.
Both my 2009 iMac and my 2011 MacBook have F-Secure installed. So the problem with the 2009 IMac is unlikly to be due to the presence of F-Secure. Interestingly, the few abnormalities found by Etrecheck were exacly identical before I ran CleanMyMac. There are two more findings (mentioned below) since I ran CleanMyMac on the 2009 iMac, which again didn't improve the problem.
So please find below the details of the EtreCheck experience and some additional measurements made with iStat while running EtreCheck:
Hardware Information:
iMac (24-inch, Early 2009)
iMac - model: iMac9,1
1 3.06 GHz Intel Core 2 Duo CPU: 2 cores
8 GB RAM
Video Information:
ATI Radeon HD 4850 - VRAM: 512 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
System Software:
OS X 10.9.1 (13B42) - Uptime: 0 days 2:40:57
Disk Information:
WDC WD1001FALS-40K1B0 disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
XooS5 HD (disk0s2) /: 999.35 GB (189.85 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
OPTIARC DVD RW AD-5670S
USB Information:
Apple Inc. Built-in iSight
Canon CanoScan
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
WD My Passport 071D 800mbit - 800mbit max
EFI (disk1s1) <not mounted>: 209.7 MB
disk1s2 (disk1s2) <not mounted>: 2 TB
Boot OS X (disk1s3) <not mounted>: 134.2 MB
Thunderbolt Information:
Kernel Extensions:
com.f-secure.kext.fsauth          (1.0.0d1)
Problem System Launch Daemons:
[failed] com.apple.wdhelper.plist [REMARK: this abnormality appeared only after running CleanMyMac. It does not appear on my 2011 MacBook]
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[invalid] com.bjango.istatlocaldaemon.plist [REMARK: this abnormality pre-existed to running CleanMyMac. It appears also on my 2011 MacBook]
[loaded] com.f-secure.fsavd.dbhelper.plist
[loaded] com.f-secure.fsavd.plist
[loaded] com.f-secure.fsmac.firewall.plist
[loaded] com.f-secure.fsmac.fsupdated_guts2.plist
[loaded] com.f-secure.fsmac.licensetool.plist
[loaded] com.macpaw.CleanMyMac2.Agent.plist
Launch Agents:
[loaded] com.babylon.activation.plist
[loaded] com.bjango.istatlocal.plist
[loaded] com.f-secure.relauncher.plist
[loaded] com.f-secure.trasher.plist
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist
[loaded] com.google.keystone.agent.plist
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist
User Login Items:
iTunesHelper
Dropbox
F-Secure Anti-Virus for MAC
3rd Party Preference Panes:
Flash Player
Internet Plug-ins::
FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 11.0.04 - SDK 10.6
AdobePDFViewer: Version: 11.0.04 - SDK 10.6
DivXBrowserPlugin: Version: 2.1
Flash Player: Version: 11.9.900.170 - SDK 10.6
OfficeLiveBrowserPlugin: Version: 12.2.8
Google Earth Web Plug-in: Version: 6.1
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
User Internet Plug-ins::
Picasa: Version: 1.0
Bad Fonts:
None
Old applications:
None
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
XooS5 HD: Disk size: 930.71 GB Disk used: 753.90 GB
Destinations:
XooS5 TM [Local] (Last used)
Total size: 2
Total number of backups: 32
Oldest backup: 2013-09-15 01:11:39 +0000
Last backup: 2013-12-07 12:48:45 +0000
Size of backup disk: Too small. Backup size 2 < (Disk used 753.90 GB X 3)
Time Machine details may not be accurate. All volumes being backed up may not be listed.
REMARK: The above finding is unlikely to be accurate. In fact, my Time Machine is supported by a 2TB WD My Passport Studio external HD connected with a Firewire 800. As mentionned, only 754GB of the 2000GB are used.
Top Processes by CPU:
5%          backupd
5%          Mail
5%          WindowServer
3%          Finder
3%          Dropbox
Top Processes by Memory:
1.60 GB          mds_stores REMARK: this item was marked in red in the outcome of EtreCheck, so I assume there is something wrong there
82 MB          Finder
74 MB          Mail
49 MB          softwareupdated
49 MB          Dropbox
Virtual Memory Statistics:
97 MB          Free RAM
1.21 GB          Active RAM
1.19 GB          Inactive RAM
1.21 GB          Wired RAM
1.83 GB          Page-ins
36 MB          Page-outs
Please find now some additional measurements collected with iStat while running EtreCheck:
Practically:
The iMac can work slowly with only one software e.g. either Mail or Safari or Firefox, but still the below "out of Memory" message occurs about every 3 minutes.
Aperture has becomre to slow to be useable
If trying to write a mail (with Mail) while Safari or Firefox is open, then the "out of Memory" message occurs about every 20 seconds so I need to check on "Resume" several times per minute.
Conclusions
From the above, unless anyone in the Apple Support Community proves to be able to identify a specific problem leading to a way to find a cure, I tend to conclude that Mavericks is not suitable for computers operating with a Core 2 Duo CPU even with a 8GB of RAM.
Unless I missed something, I did not see any warning from Apple Computer Inc. informing their customers they should refrain from upgrading Core 2 Duo Computers.
The only solution I see so far is to downgrade from Mavericks to Mountain Lion. And the Apple Support Community would confirm that it is the only solution, I would appreciate to get your guidance on how to proceed.
Intended action plan
Migrate the above 2009 iMac to a 2014 Mac Mini Server operating on Mavericks to ensure that no data may be lost while downgrading to Montain Lion.
Provided the above downgrading operation is successful, assign this 2009 iMac to partial retirement e.g. Mail, Skype, iTunes and DVD player.
In advance, I would like to thank the Apple Community for helping me either i) finding a cure to the problem, ii) or confirming that Mavericks cannot operate properly on Core 2 Duo computers, iii) and in such a case, guiding me on how to downgrade to Mountain Lion.
Yours sincerely
Core

... what anti-virus would you recommend using?
Use what is already included with OS X. It already includes everything it needs to protect itself from viruses and malware. Keep it that way with software updates from Apple.
A much better question is "how should I protect my Mac":
Never install any product that claims to "speed up", "clean up", "optimize", or "accelerate" your Mac. Without exception, they will do the opposite.
Never install pirated or "cracked" software, software obtained from dubious websites, or other questionable sources. Illegally obtained software is almost certain to contain malware.
Don’t supply your password in response to a popup window requesting it, unless you know what it is and the reason your credentials are required.
Don’t open email attachments from email addresses that you do not recognize, or click links contained in an email:
Most of these are scams that direct you to fraudulent sites that attempt to convince you to disclose personal information.
Such "phishing" attempts are the 21st century equivalent of a social exploit that has existed since the dawn of civilization. Don’t fall for it.
Apple will never ask you to reveal personal information in an email. If you receive an unexpected email from Apple saying your account will be closed unless you take immediate action, just ignore it. If your iTunes or App Store account becomes disabled for valid reasons, you will know when you try to buy something or log in to this support site, and are unable to.
Don’t install browser extensions unless you understand their purpose. Go to the Safari menu > Preferences > Extensions. If you see any extensions that you do not recognize or understand, simply click the Uninstall button and they will be gone.
Don’t install Java unless you are certain that you need it:
Java, a non-Apple product, is a potential vector for malware. If you are required to use Java, be mindful of that possibility.
Disable Java in Safari > Preferences > Security.
Despite its name JavaScript is unrelated to Java. No malware can infect your Mac through JavaScript. It’s OK to leave it enabled.
Block browser popups: Safari menu > Preferences > Security > and check "Block popup windows":
Popup windows are useful and required for some websites, but popups have devolved to become a common means to deliver targeted advertising that you probably do not want.
Popups themselves cannot infect your Mac, but many contain resource-hungry code that will slow down Internet browsing.
If you ever see a popup indicating it detected registry errors, that your Mac is infected with some ick, or that you won some prize, it is 100% fraudulent. Ignore it.
Ignore hyperventilating popular media outlets that thrive by promoting fear and discord with entertainment products arrogantly presented as "news". Learn what real threats actually exist and how to arm yourself against them:
The most serious threat to your data security is phishing. To date, most of these attempts have been pathetic and are easily recognized, but that is likely to change in the future as criminals become more clever.
OS X viruses do not exist, but intentionally malicious or poorly written code, created by either nefarious or inept individuals, is nothing new.
Never install something without first knowing what it is, what it does, how it works, and how to get rid of it when you don’t want it any more.
If you elect to use "anti-virus" software, familiarize yourself with its limitations and potential to cause adverse effects, and apply the principle immediately preceding this one.
Most such utilities will only slow down and destabilize your Mac while they look for viruses that do not exist, conveying no benefit whatsoever - other than to make you "feel good" about security, when you should actually be exercising sound judgment, derived from accurate knowledge, based on verifiable facts.
Do install updates from Apple as they become available. No one knows more about Macs and how to protect them than the company that builds them.
Summary: Use common sense and caution when you use your Mac, just like you would in any social context. There is no product, utility, or magic talisman that can protect you from all the evils of mankind.

ITunes sounds scratchy and slow

When I play songs in iTunes, they sound scratchy and have pops in them. At about 8-10 seconds in, it really slows down for a second or two and then seems to free up a bit, but not without the scratching and pops.
I have iTunes 7.0.1.8 running on Windows XP. I have searched through the forums and tried all the suggestions I have seen about the QuickTime preferences, updating DirectX, etc. Nothing seems to help 100%. Any ideas????
eta - It gets worse when the CPU seems to be running at high capacity - (like opening an app or ie or something).

Bump - Anyone out there experienced the same thing???

MacBook sound cuts in and out & getting a beach ball a lot.

When I try to play a video the sound either cuts in and out or just stays off. You can barely hear a small popping noise through the speakers. The chisel also lags very band making it impossible to watch, it does not matter if the video is online or on the computer itself. I also get the beach all allot even sometimes just using Word. Is there any way to fix this without wiping the hard drive?
Here is a video if this will help
http://www.youtube.com/watch?v=V3NYtPt0vIc&feature=youtube_gdata_player

Hi I have experienced this problem also, especially when listening to mp3's. At first I thought the quality of mp3 was the cause (as in different encoding quality) but it seemed to happen when playing DVD as well. I don't think a reboot will solve the problem for good, as it happens quite randomly. I have a sneaking suspicion that the internal speakers may be at fault. doesn't hurt to get apple to check it out while under warranty.
15"PBG41.5ghzAL Mac OS X (10.4.5) 1Gb RAM 30gb free space

Player 10 - Slow and Distorted MP3 Playback.

I began experiencing this problem once I download Flash
Player 10. The mp3 playback is slow and sounds very distorted.
This only seems to occur with mp3s at a 48k sample rate. Mp3s
at a sample rate of 44.1k sound normal. Is there a way to fix this
without converting the sample rate? Is Adobe working on a solution?
Thank you.

I'm getting the same thing. Are all of you on Apple platform? It seems to be the only place this is showing up.
Macbook Pro - OSX 10.5.6
When I uninstall flash player and reinstall 9 it works fine. On another not when using CS4 at work the same thing happens locally when I test the movies.
It's sounds like music on nitrous in hell. .. . .

Video playback slow and audio drop out after render

Hi
I have downloaded a trial version of After Effects from the cc,
Problem is everytime I render ou,t the video playback is slow and the audio drops out
This happens with AVI or Quicktime files.
Using a Intel i5 quad core, 8 gig of ram 250 gig ssd.laptop
Render/export in Premire pro is fine.
Can any one help.
Regards Phil Green
Blue Room Media.

It sounds like you might be hitting the space bar in hopes of getting real time playback. Sorry, but AE doesn't work like that, because it does totally different things from an editing application like Premiere.
And if you've downloaded the tryout version, you really ought to learn how AE works... and a short description is "it doesn't work intuitively". You can frustrate yourself in a hurry.
But this can really help;
Getting started with After Effects (CS4, CS5, CS5.5, CS6, & CC) | After Effects region of interest

MP3s sound slow and out of t

Similar Messages

Maybe you are looking for