MRP - PRs being generated along with Schedule lines

Hi
Problem statement - PRs also getting generated alongwith schedule lines in MRP.
We have 'PD' MRP type set up for externally procured material with 'F'. I had set up to generate schedule line using the sourcelist. and during the planning run MD03, I am selecting the following values
Create PR - '2' Purchase requisitions in the open period (any value in the three generates a PR/Planned order in the open period)
Delivery Schedules - 3 Schedule lines.
The client requires only generation of schedule lines.  How can I get this done.
regards
Nagaraj

Dear Nagaraj,
For MRP to create the schedule lines automatically, please change to the following settings.
1. Create Scheduling agreement for the vendor,Agreement type  LP.
2. In ME03, Source List: Maintain MRP = 2 Record relevant to MRP. Sched. lines generated automatically.
3. Run MRP
Hope this helps you.
Regards,
Ashish

Similar Messages

  • Withholding tax lines are being cleared along with other line items

    Hi All,
    While doing J1INCHLN(payment making of TDS), system giving error i.e.
    "Withholding tax lines are being aleared along with other line items"
    Please suggest me in this issue...it would be great help for me.
    Thanks,
    Saisri

    Hi,
    As per my analysis we found some documents, here We have made advance payment to vendors with TDS and again rised invoce to vendors with TDS and these documents have been nockedoff in F-54.
    We have many documents of such nature and as per me it is because of these documents  the system is throwing error. Pls. advice as to how to proceed on this.
    Thanks,
    Saisri

  • Complete MRP status according to Sales order schedule line data

    Dear All,
    Please help me to get technical configuration releted to
    "complete MRP status according to Sales order schedule line data"
    or MRP w.r.t. Schedule line
    Please send fields and table and logic specification .
    Thanks & Regards,
    Ashish Gautam

    You can use following Fm for change sales order
    CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
      EXPORTING
        salesdocument     = p_vbeln
        order_header_in   = s_order_header_in
        order_header_inx  = s_order_header_inx
        behave_when_error = 'P'
      TABLES
        return            = it_return
        order_item_in     = i_order_item_in
        order_item_inx    = i_order_item_inx
        schedule_lines    = i_sched
        schedule_linesx   = i_schedx.

  • WH  tax line items cleared along with Other line items Message no:8I701

    hI guru,
    When i run J1INCHLN  System givem the error is : Withholding tax line items cleared along with other line items, message no:8I701
    Pleas any one give solution ..
    I also cheked as respective g/l for tds IN FBL3N . All line items are opend.
    Also cheked all selection parameter in J1INCHLN  and FBL3N .is same .
    Why the sys behaviour like this .
    Thanks is andvance
    Milind

    HI,
    he error is occuring in this part of the
    unction Module J_1IEWT_CHALLAN_UPDATE
    >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
    LOOP AT p_t_ausz1.
    Select the cleared line item from bseg table.
       SELECT SINGLE * FROM bseg INTO  p_bseg_tab
                WHERE bukrs = p_t_ausz1-bukrs
                AND   belnr = p_t_ausz1-belnr
                AND   gjahr = p_t_ausz1-gjahr
                AND   buzei = p_t_ausz1-buzei
                AND   ktosl = 'WIT'
                AND   qsskz NE space .
       IF sy-subrc <> 0.
    This is not an ewt clearing transaction relevant for challan update.
         p_no_with_clear = 'X'.
         EXIT.
       ELSE.
         APPEND p_bseg_tab.
       ENDIF.
    ENDLOOP.
    Even if one line item chosen is not of withholding tax entry, system
    should exit by error message.
    DESCRIBE TABLE p_bseg_tab LINES  p_bseg_lines.
    DESCRIBE TABLE p_t_ausz1  LINES  p_with_lines.
       IF p_bseg_lines > 0.
    At least one entry is found in bseg table for challan update.    IF p_with_lines NE p_bseg_lines.
    At least one line chosen by the user is not for challan updation.
          MESSAGE e701(8i).
    >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>.
    This is a clear case,that you are trying to post some documents
    which does not match with the selection parameters.
    I feel the above problem could be due to some document/s (open items of
    the earlier years)are incorrect which is causing the reported problem.
    Kindly run the challan update program for smaller date range so that you
    can find the faulty document.
    Hope this solves your query.
    Reg
    Madhu M

  • How to get Header data into multiple times along with the Line Items

    Dear All,
      I have problem while mapping the Header data and line item data to the flat file structure, Header data have to repeat along with the Line item data in the flatfile.
    Details is below.
    Example
    Header record is one
    E1EDK01
    E1EDKA1
    Line items are two
    E1EDP01
    E1EDP01
    I want in the flat file two records having duplicate data in the fields which is belongs to header data
    Like :
    Record #  partner data     Line item data
    Record 1 : WE name1 city   00010 materialname1 156
    Record 2 : WE name1 city   00020 materialname2 198
    ( WE name1 city - data is same in the record 1)
    For this what I did is I mapped the node E1EDP01 to the flat file message type node then I got all the line item data and first record is with header data but not in the second record.
    I tried all node functions but no result because Idoc itself header data exists one record, I am not able to copy.
    If any one knows , please give solution.
    It is great help to me.
    Thanks in Advance.
    Ramarao

    Dear Ramarao,
    This will help you,
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f59730fa-0901-0010-df97-c12f071f7d3b
    No Documentation for Mapping Function useOneAsMany (Mapping Problem)
    /people/claus.wallacher/blog/2006/04/17/replication-of-nodes-using-the-graphical-mapping-tool
    /people/narendra.jain/blog/2005/12/30/various-multi-mappings-and-optimizing-their-implementation-in-integration-processes-bpm-in-xi
    /people/sravya.talanki2/blog/2005/12/08/message-mapping-simplified-150-part-ii
    Thanks & Regards
    Agasthuri Doss

  • Weekly lot size calculation with scheduling lines

    Hi,
    We are using WB = weekly lot size calcultaion for purcahsed material.
    We are also using Scheduling agreement and MRP is creating schedule lines automatically, but it does not take into account the weekly lot size.
    If we have three different requirements coming from different end products for same week, but different date and then we run the MRP, SAP will create three different schedule lines for the same date. Is it possible to configure system so, that it will create one schedule line in that case?
    Regards,
    jaana

    Hi,
    We are using rounding profile and minimun lot size from the Quota arrangement. Roundings seems to work fine.
    Which plant parameters you mean, I have check the MRP plant parameters, bur is there some point which will effect for the gouping?
    Thanks and regards,
    jaana

  • MRP Run Error creating Requisitions instead Schedule Lines

    Hi Folks,
    I am facing  a typical issue with MRP Run.
    Every time when I am running the MRP for a particular material I have made settings such that Schedule lines to be generated by maintaining the Source list and MRP relevancy as 2 in source list. Also I have fixed the vendor. Now my problem is I am getting Schedule lines for first run and Combination of Purchase requests and Schedule lines or only PRs for the next MRP run.. This is keep on repeating in such as way that the planning is shifting as said above for subsequent MRP Run.
    Note that the initial settings during MD02 remain same for all run.
    I want only schedule lines to be generated but not PR.
    Pls advise and provide input where the wrong might be.
    Quick responce would be appreciated.
    Regards
    Shash
    Edited by: Shash on Sep 19, 2008 1:10 PM

    Can you please tell me how you solved the problem as i have the same problem .
    Quick response will be a boon.
    Regards
    Raj

  • Problem in MD04 with schedule lines ME38

    Hello gurus,
    I've got a problem with ME38 and MD04.
    ME38 shows some quantity schedules on a date but in MD04 these schedules are not shown.
    Thanks for support.

    Hi,
    Check the GR column on the far right of the display of the schedule lines (MRP doesn't display lines where the sched line qty = GR qty)
    Hope that answers your question
    Alex Dixon

  • MRP Type P1 and late firm schedule lines

    Hello All,
         We are using MRP Type P1 which firms our schedule agreement schedule lines within the planning time fence (as desired).  However, sometimes the supplier is late on delivery and the firm schedule line goes into the past.
         Is it possible to have MRP move the firm schedule line delivery date to today instead of going into the past?
         Thank you,
         Jerry

    Hi ,
    Bring process forward (reschedule in)
    Within this rescheduling horizon, the net requirements calculation checks whether, after a requirement, a firmed receipt exists, which can be used to cover this requirement. Then the system displays a rescheduling date as well as the exception message Bring process forward for this receipt. The net requirements calculation then uses this receipt and the system will only create another procurement proposal if the receipt quantity is not sufficient to cover the complete requirement. Several firmed receipts can be used to cover one requirement.
    It does not take in to account the GR processing time and it is purely based on the stock requirement date , parameters in Procurement and Scheduling in the Material Master
    So it will consume the requirement  backward scheduling and bring the Process forward.
    Kumar which  strategy are you using ?  scheduling agreement is of weekly , daily or monthly bucket ?
    How many days SA bring to Production and How many days SA for forecast you are doing ?
    Are you using any Program to convert these SA in to PIR and upload ( using any program ) .
    Regards,
    Jayavimal
    Edited by: jaya vimal on Jun 16, 2010 1:33 PM

  • Show the PO and Invoice Number along with Distribution Line Info

    Does any one have some code that can show the PO and Invoice number along with the distribution line detail?
    I'm tring to get to the po.po_vendors for segment1 and po.po_distributions_all but it screws up at the po.po_lines_all table which needs outer joins and it's just not working for me.

    In case Invoice Distribution is matched to a Purchase Order then
    ap_invoice_distributions_all.PO_DISTRIBUTION_ID and ap_invoice_distributions_all.DIST_CODE_COMBINATION_ID is the link to po_distributions_all table
    Hope this help
    Ashish

  • Send all line items of a sales order to IPC along with condition lines data

    We wrote some pricing routines in R/3, where while doing he calculations for condition line item, we needed to pull in the material information for previous line items. So we exported vbap and imported it inside the routine to be able to have access to all the line items in the sales order. Now, we need to put in the same kind of logic in CRM/IPC. My question is what would be the equivalent of SAP's(import/export) commands for internal tables in case of IPC. I looked at the BADI CRM_COND_COM_BADI but still do not see how I can send all the line items  data to IPC. So I guess, the question comes down to, how do I send all the line items of the sales order (whole VBAP in R/3 terms) to IPC along with the condition line data? Can someone please help?
    Thanks

    Hi Vaibhav,
    If you can get the list of Sales orders which has deleted line items and force completion status. You can manage them in BI via lookup  or navigation attribute.
    Just my views I am sharing .
    Thanks,
    KDJ

  • Delivery block with schedule lines

    Hi guys,
    I have the problems that delivery blocks, custumized as not relevant for requirements, are generating requirements if used in schedule lines.
    Header: Delivery block -> NO requirement -> ok
    Schedule lines: Delivery block -> requirements -> not ok
    That's SAP Standard, but I know, that it is possible to set the confirmed quantity in the VBEP (VBEP) to 0 and to set the fixed quantity field to "X".
    Then is no requirement generated.
    I have tryed it in USEREXIT_CHECK_VBEP -> but I don't know how - could anyone give me a tip ??
    Greatings
    Manuel

    Hello Manuel,
    Can you add few more inputs to your question? because the given details / input are not sufficient to arrive at a solution.
    Thank you

  • Sales Order Stock - Problem with Schedule line

    Hi guru,
    I have a problem with my schedules line.
    We use the Sales order stock ( using MB1B with good movement  412/E) for some specific customers.
    Even if the sales order reservation works well, there is an issue with the schedule line in the order.
    Indeed when i enter the material in the order the schedule line display an availibily in 8 days even if the material is out of stock or available now....
    When i enter the same materila in a standard order(with item category without special stock E) the schedules line are good...
    What is it the most weird is that i have done the customizing by copying the standard item and i have just added the special stock E in the item category.
    If anyone can help me!!
    Thanks a lot

    hello Lakshmipathi,
    Thanks a lot for your reply.
    I tried to change the requierement class in order to put one with special stock E as you explained, but i still have my weird schedule line. When i put the item in the order it is 0 stock for today, but stock find in 12 days either if there is stock or no(unrestricted stock i mean).
    If i change the RDD in more than 12 days the stock is available for the date requested.
    If you have an idea of what could be wrong because on my case i want the schedule line to be at 0 while the sales order reservation has not been processed (via MB1B/412/E) and once the stock movement is done the schedule line has to be find.
    I dont know if im clear enought..
    To be more clear,  i want the schedule line based on the "sales order stock" and not on the "unrestricted stock".
    thanks for your help!
    Guillaume

  • Sales Order Credit Status Block with Schedule Line ATP Confirmed Quantity

    I would like to keep the Credit Status Block on a Sales Order when it is created and over the credit limit and at the same time be able to Confirm the Order Quantity (if inventory is available) on the Schedule Line.  Has anyone done this?  I'm using ECC 5.0
    In the IMG --> Sales and Distribution --> Basis Functions --> Credit Management/Risk Management --> Credit Management --> Define Automatic Credit Control --> If I remove the Status/Block indicator the schedule line does confirm the sales order quantity but the sales order is not blocked and a delivery can be created.
    Thanks.
    Donna

    Hello Donna,
    I think I solved your problem.
    There are two ways to block the sales order - one is to not confirm the Schedule line i.e. block delivery... block further action that can be taken. The second is to not let the person save the sales order.
    Another option is to get Just a warning message, that the credit limit has been exceeded, but able to save the sales order with a confirmed schedule line.
    The setting will be in OVA8.
    For the Document Value you make the setting C or A. and make sure the block is not set.
    Don't worry about the Open order or open delivery unless you want the system to perform a credit check considering the orders that are already existent. Same with open delivery. It will take into account all the cost of the orders that are open for delivery.
    Now here some options:
    Either consider a 'warning' by the system good enough and still be able to confirm the schedule line.
    (ii) Put in a Delivery Block in the Sales Document Types, in the Shipping tab. That way, you will be able to save the sales doc. but not be able to deliver it.
    (iii) Put a Billing Block in the Sales Doc type, in the Billing tab. You will be able to deliver but not bill.
    (iv) Create a new routine (with the help of an ABAP guy) and place it in the auto credit check, 'Reaction' field where it will place a Delivery Block.
    Do let me know what your thoughts are and what you decided to do.
    Thanks
    Noel

  • Generating Report with vertical lines from Designer

    Hi:
    I would like to get any suggestions about generating tabular reports with vertical lines from Oracle Designer 6.0 on Windows NT.
    Any help will be appreciated.
    Thanks in advance

    Hey c2petrov,
    Thanks for using Apple Support Communities.
    After reviewing your post, it sounds like you are having trouble with the screen. A frustrating situation to be sure. This article addresses issues with video on internal or external displays.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573
    Have a nice day,
    Mario

Maybe you are looking for