Ms-6585 with msi 4200 128 8x blue screen and blank screen with msi agp

here's the system,
sorry for the not usefull crap.
Operating System: Windows 2000 Professional (5.0, Build 2195) Service Pack 3
           Language: French (Regional Setting: French)
System Manufacturer: MSI
       System Model: MS-6585
               BIOS: Version 1.00
          Processor: Intel(R) Pentium(R) 4 CPU 2.53GHz
             Memory: 512MB RAM
          Page File: 212MB used, 1265MB available
        Windows Dir: C:\WINNT
    DirectX Version: DirectX 9.0 (4.09.0000.0900)
DX Setup Parameters: /PackageInstall
     DxDiag Version: 5.03.0000.0900 32bit Unicode
DxDiag Notes
  DirectX Files Tab: No problems found.
      Display Tab 1: The file nv4_disp.dll is not digitally signed, which means that it has not been tested by Microsoft's Windows Hardware Quality Labs (WHQL).  You may be able to get a WHQL logo'd driver from the hardware manufacturer.
        Sound Tab 1: No problems found.
          Music Tab: No problems found.
          Input Tab: No problems found.
        Network Tab: The registry information for the DirectPlay application 'Gangsters 2' is missing or damaged.  You should reinstall that application.
DirectX Debug Levels
Direct3D:    0/4 (n/a)
DirectDraw:  0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay:  0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow:  0/6 (retail)
Display Devices
        Card name: NVIDIA GeForce4 Ti 4200 with AGP8X
     Manufacturer: NVIDIA
        Chip type: GeForce4 Ti 4200 with AGP8X
         DAC type: Integrated RAMDAC
       Device Key: Enum\PCI\VEN_10DE&DEV_0281&SUBSYS_89431462&REV_A1
   Display Memory: 128.0 MB
     Current Mode: 1024 x 768 (32 bit) (75Hz)
          Monitor: Écran Plug-and-Play
  Monitor Max Res: 1600,1200
      Driver Name: nv4_disp.dll
   Driver Version: 6.14.0001.4345 (English)
      DDI Version: 9 (or higher)
Driver Attributes: Final Retail
 Driver Date/Size: 3/20/2003 20:13:00, 3097098 bytes
      WHQL Logo'd: No
  WHQL Date Stamp: None
              VDD: n/a
         Mini VDD: nv4_mini.sys
    Mini VDD Date: 3/20/2003 20:13:00, 1261418 bytes
Device Identifier: {D7B71E3E-41C1-11CF-2B67-42A900C2CB35}
        Vendor ID: 0x10DE
        Device ID: 0x0281
        SubSys ID: 0x89431462
      Revision ID: 0x00A1
      Revision ID: 0x00A1
      Video Accel: ModeMPEG2_A ModeMPEG2_B ModeMPEG2_C ModeMPEG2_D
 Deinterlace Caps: {212DC722-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {212DC723-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_MedianFiltering
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                   {212DC722-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {212DC723-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_MedianFiltering
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
                   {212DC722-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
                   {212DC723-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_MedianFiltering
                   {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
         Registry: OK
     DDraw Status: Enabled
       D3D Status: Enabled
       AGP Status: Enabled
DDraw Test Result: Not run
 D3D7 Test Result: Not run
 D3D8 Test Result: Not run
 D3D9 Test Result: Not run
i cannot run agp 4x and 8x
if i try to tweek my vid card, i have blue screens
i cannot run any msi agp drivers (all i see is mouse cursor)
i'm running nvidia drivers
help me !!!

Quote from: Bas on 01-November-08, 19:55:21
Try again with Vista 32bit, 64bit is highly unstable and only a few have it running stable.
I've been running Vista x64 for the past nine months, and now with my K9A2 P--and have had no problems.  I mean, none.  Have not had any occasion to even consider reinstalling Vista x32. Vista x64 has been stable as a rock for me consistently since I installed it.  Would not consider going back to XP under any circumstances.
There is a problem with Beard0's system that I would say boils down to device drivers or faulty hardware or some combination thereof.  His experience is dramatically different from my own, and the problems he's having are not indicative of my experience with Vista, whether x86 or x64.

Similar Messages

  • Ipod 4 is displaying blue frozen screen and black screen with apple logo. I try to turn power off but as soon as it goes out it automatically reboots. Plugged it into the usb port on my mac and it doesnt do anything. It doesnt appear in Itunes. Help?

    ipod 4 is displaying blue frozen screen and black screen with apple logo. I try to turn power off but as soon as it goes out it automatically reboots. Plugged it into the usb port on my mac and it doesnt do anything. It doesnt appear in Itunes. Help?

    Let the battery fully darain. After charging for an least an hour try a reset and restore. Use Recovery mode if necessary.
    If not successful, then time for an appointment at the Genius Bar of an Apple store.

  • At startup I get grey screen and a folder with a flashing question mark.  How do I reset my MacBook Pro to the manufacture defaults?

    At startup I get grey screen and a folder with a flashing question mark.  How do I reset my MacBook Pro to the manufacture defaults?

    Click here and follow the instructions. If the computer originally shipped with Mac OS X 10.6.8 or earlier, when you reach step 5, insert its original disk, restart with the C key held down, use the Disk Utility to erase the internal drive, and install a fresh OS.
    (113954)

  • Back to My Mac/VNC/Screen and File Sharing with a PC

    Ok back to my mac is great but it doesn't work with a pc. What is the best alternative to screen and file sharing with a PC???
    Thanks,

    Use VNC.
    On the PC.
    http://www.realvnc.com/products/free/4.1/index.html
    On the PocketPC
    http://www.windowsfordevices.com/news/NS5673359231.html
    Apple's Remote Desktop allows for VNC control through a password.
    iFelix

  • TS1702 I'm not able to update Smurf's Village. Tried most of the things proposed on the net including restarting the iPad and trying syncing with the computer. Had a similar issue with another application. Had to delete and reinstall it, with all history

    I'm not able to update Smurf's Village. Tried most of the things proposed on the net including restarting the iPad and trying syncing with the computer. Had a similar issue with another application. Had to delete and reinstall it, with all history lost.
    Tried following up with the developer's instruction. Didn't help. Developer suggested contacting Apple if their instruction didn't work. Tried the various methods recommended on the Apple site. Same result.

    Telling is that you tried most of the things on the net doesn't tell us exactly what you did try, so we are all still left to guess .....
    Sign out of your account, restart the iPad and then sign in again.
    Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>Store>Sign in and then try to update again
    If that doesnt work - go to Settings>General>Date and Time - set the date ahead by a few months. Try to update again. If you get an error message of any kind - go back and change the date and time to automatic again. Then try again.
    If that doesn't work, restart your router and reboot the iPad.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • HT201210 Help, I just gave iTunes the assignment to update my iPhone5 to iOS7 and now it gives an unknown error (6). The iPhone is still hooked to my laptop, and shows the black screen and bright Apple with the horizontal bar, telling it's in the middle o

    Help, I just gave iTunes the assignment to update my iPhone5 to iOS7 and now it gives an unknown error (6). The iPhone is still hooked to my laptop, and shows the black screen and bright Apple with the horizontal bar, telling it's in the middle of something. What should I do?

    DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....

  • I have a 4s with the latest 6.0.1 update and windows 7 with iTunes 11. When I connect the phone, windows can see but iTunes doesn't. Have tried re-installs and re-starts. Anybody else have this problem

    I have a 4s with the latest 6.0.1 update and windows 7 with iTunes 11. When I connect the phone, windows can see but iTunes doesn't. Have tried re-installs and re-starts. Anybody else have this problem?

    Did you go through all the options?
    Also this:
    Also, third-party security software may conflict with iOS devices connecting to iTunes. Follow this article to troubleshoot issues that may be caused by your security software. After resolving any issues you may have with your security software, you may need to try the steps in this article again.

  • What should i do with my ipad because it fell down and the screen cracked but its still functioning

    what should i do with my ipad because it fell down and the screen cracked but its still functioning

    Up to you whether you want to get it serviced. If you don't, I'd suggest putting on a screen protector to help hold the screen together and try to prevent further damage. It's likely that it will eventually fail at some point, but you could get lucky and have it continue to work for quite some time.
    If you decide you want to get it serviced, Apple does not repair iPads, but will replace the entire iPad for a flat fee. If you have AppleCare+ on the iPad, the cost will be relatively minimal; $49 in the US. Otherwise, see the Service Pricing section here:
    http://www.apple.com/support/ipad/service/faq/
    There are independent iPad repair services that may be able to replace the screen for less. Do a web search for "ipad repair".  You can also look for parts and instructions and do the repair yourself. Note, though, that if you elect to have the iPad serviced by an unauthorized shop or perform your own repair, you will get no further support from Apple.
    Regards.

  • Equium - Black screen and cant reboot with the recovery disc

    I have a black screen and cant reboot with the recovery disc but I seem to be getting nowhere.
    I find it strange I cant ask Toshiba direct about my problem but I have to wait for a kind hearted person to solve my problem or give me a helping hand

    Of course you can ask Toshiba. Toshiba has Authorized service providers worldwide and I hope some of them are in your country too.
    So please visit Toshiba support page under http://eu.computers.toshiba-europe.com > Support & Download > Find an ASP and contact nearest service provider. Just explain the situation and I hope they will help you.
    Back to your problem:
    It is not easy to say why this happen. The whole issue is not described so well and I am missing some important points.
    Maybe you have upgraded RAM and now notebook doesnt start properly. It is also possible that CPU is defective. It can be so many different reasons for this.
    Best thing you can do is to contact service and ask for help. they can run diagnostic tools and find out quickly what the problem is.

  • My Macbook Air 2011 got a white screen and a folder with a question mark. I tried to press option+r and try to install the OS X Lion but it didn't show the disk Macintosh Hd

    My Macbook Air 2011 got a white screen and a folder with a question mark. I tried to press option+r and try to install the OS X Lion but it didn't show the disk Macintosh Hd

    You are using Snow Leopard so you have no OPTION+R shortcut. You need to boot the computer from your Snow Leopard DVD or USB flash drive.
    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • Cisco IP Phone 7945-G or 7965-G screen goes blank randomly with SCCP firmware 9.2(3) on CUCM 8.6(2a)

    Hello everybody,
    I have the following situation:
    A WAN VoIP network, with centralized call processing model (central site and few branches)
    Cisco IP Phones 7945-G and 7965-G running SCCP
    Cisco Unified Communications Manager 8.6(2a)
    SCCP firmware Release 9.2(3) for the above mentioned hardware models
    The problem that occurs randomly is that either when the firmware was SCCP firmware Release 9.2(1), or it was upgraded to SCCP firmware Release 9.2(3), approximately 5 Cisco IP Phones, the screen goes blank, the phone being still operational (but difficult to operate in such circumstances), and the problem persists until it is disconnected from PoE, and re-connected.
    Please if possible, any solution to this problem is much appreciated.
    Thank you in advance.
    Radu

    Hello  again,
    In addition to  what I already mentioned, I would like to detail a few aspects, in order to be  more specific with this behavior:
    -          From the total number of Cisco IP  phones which is less than 1000, this behavior happened randomly, within 1 month  and 3 weeks
    -          Actually, it was a total number of 8  Cisco IP phones whose display went off, 4 being located in Headquarters, and  from the other 4, 3 were in the same Branch, and 1 in another  Branch
    -          Also, 7 IP phones are connected in  non-Cisco switches with PoE, and 1 IP Phone was power supplied from AC  adapter
    -          initially, all existing IP phones  had firmware Release 9.2(1) for 7945G and 7965G, and the mentioned behavior  happened with 4 IP phones
    -          then, for all IP phones, it were  upgraded to firmware Release 9.2(3) for 7945G and 7965G, but problem re-appeared  with other 4 IP phones
    The only  solution that solved the issue for each IP phone was to disconnect the power  from the IP phones.
    I hope that you  might help me on how to get solving this problem, and I am looking forward for  any useful idea or solution.
    Many thanks in  advance.
    Regards,
    Radu

  • I am having trouble with my MacBook Pro. I get a blank screen with a flashing document file with a question mark in it, yes I have tried to install Mac OS X with the original disk but I get no choices of where I wish to install Mac OS X. Please help ;(

    I am having some trouble with my computer, what happened was: I was playing on a game, I played with a magnet, it started to go slower and slower, I pressed F9 then it went slower and then it went to a blank screen with a flashing document with a question mark on it. I tried the original OS X installation disk but when it came to choosing the area of which I save it, it showed no areas.

    Startup your Mac while holding down the Option key. That should prompt the Startup Manager window where you can select the startup disk then click Restart.
    If the startup disk is not available from that window, you may be able to repair the disk.
    Help here >  A flashing question mark appears when you start your Mac

  • Problem with Call Screen and Leave Screen !

    Hi,
    I am calling Modal screen (Dialog Pop up screen) from my first screen by 'Leave to Screen 'nbr' ' then once user enter the value in the pop up screen then I haveto display value with TABLE in Final screen as 'Normal screen'  here I am  using LEAVE to SCREEN, but after this call - my new final screen is not displaying as noraml screen it also displaying like 'Modal Screen' Like big pop scrren.!!
    When I tried final CALL by using CALL SCREEN instead of LEAVE screen the final screen with  table is dispalying fine as Normal screen but its returning control to pop-up screen which I dont want.
    I like Screen flow as 1>2>3--->1
    Help me to solve this Problem.
    Regards
    James

    Hi,
    Check the below thread,
    Unable to close Modal dialog box
    1) 1st screen--> 2nd screen --> Use CALL SCREEN.(This is Modal Screen)
    2) 2nd Screen-->(ModalScreen so you need come back) use the above thread
    3) Still on 1st screen--> Use CALL SCREEN --> To 3rd Screen
    4) 3rd Screen back to First Screen -> use LEAVE TO SCREEN First_Screen_NO.
    Cheerz
    Ram

  • Grey screen and file icon with question mark appearing at startup on old model macbook

    We own  a very old model macbook and the startup screen appears as grey and an icon appears in the shape of a file with a question mark in the middle and the startup does not proceed from there. Any help would be much appreciated.
    Thanks,
    Athula

    Some things to check/try in no particular order:
    https://support.apple.com/kb/TS1440
    http://support.apple.com/kb/ts2570
    https://discussions.apple.com/docs/DOC-5282

  • My iphone keeps flickering on the load up screen and my screen goes from blue to black and keeps flickering any solutions?

    as i said my iphone keeps flickering on the load up screen the apple logo goes back and forth and the screen changes colour from black to blue, help!?

    You don't say which year it is, but if it's a 13" you're not having a common GPU that some 2010 and 2011 15" models are having.
    Since reinstalling the OS didn't help, I'm afraid that the only real choice you have is to take the machine to your local Apple Store or an AASP and have them run diagnostics on the machine. It's likely a screen problem, rather than a logic board problem (although that's always a possibility).
    The testing is free as if the estimate for repair. There's really nothing else you can do yourself at this point.
    Sorry,
    Clinton

Maybe you are looking for