MSI DVD and new detonator drivers

I cannot seem to get MSI DVD 3.1 to play DVDs with new det. drivers. The dvd player works fine with older driver versions but seems to have a problem with copywrite protection with new drivers.
Is this something nvidia is writing into these drivers in order to sell it's own NVDVD software or is there an update for MSI DVD 3.1. I have tried both nvidias version and MSI version of the new det. drivers with no luck. Older driver versions work fine. I cannot seem to find anything about this subject anywhere. Is there any solution to this?

Hi...
I just bought a gf4 mx 460-vtp and i´m using detonator 2942 and TV out works fine... BUT I dont know how to watch TV by SVIDEO... only RCA... do you know what can this be ? Have you ever watched TV using SVIDEO CABLES ? write to me to keep in touch about problems, cause we have the same card... OK ?
[email protected]
Quote
Originally posted by derraa
With my msi gf4 mx 460-vtp, I cant use my tv out when I install the 30.30 drivers. This happens with all drivers above 28.32. Any ideas?
thanks

Similar Messages

Alcahol 120 percent and new nforce drivers

http://www.nforcershq.com/forum/viewtopic.php?t=34891
latest version told me with new nvidia drivers i had no burner
so im using an older one
well this seems to be the fix
Making it work with the updated IDE drivers is easy, in options change the 'Device Control Interface' from default to the other one. Restart Alcohol 120% and all your devices should be listed.
might save some one a headache

Concerning the IDE driver. Same as all the other versions Nvidia has released for me. Complete junk. Also, it appears they removed the file. The links to it are dead or redirected to the 4.12's...which are also junk.
1. Breaks my Sound Card. System hangs on audio driver install then will no longer boot, except to Safe Mode to remove the driver, due to nForce gameport incompatibility. Standard IDE does not hang, then Gameport can just be disabled (since the nForce2 chip breaks it anyway).
2. Breaks Easy Recovery Pro (data recovery software) and who knows what else. When it attempts to scan the drives, it fails with a Windows error. Standard IDE driver works fine.
3. SiSoft Sandra reports slower speeds than standard IDE driver.
Standard score 35247 kB/s
Nvidia score 30124 kB/s

DVDA and new Creative drivers/softw

I may have had too much to dream when I read it, or thought I read it, but are new drivers etc, disabling the ability to play DVDA disks with my Addigy 2 ZS Platinum? It may have just been a WinDVD issue but I can't remember and am loathe to upgrade my softs and drivers.

Just tried this using my X-Fi and the latest drivers from Creatives site and it's made a big difference. Some parts where I was getting a fps rate in the twenties are now up into the fourties. So a big thank you for posting this!
Wondered if it'd help my Call of Duty 2 demo problems but no go. :-(
Also, with the X-Fi cards there is another process listed that I terminated as well, after testing with the other one disabled already. It's called 'CTXFIHLP', which I'm asuming is an X-Fi only extension of the CTHELPER.
Didn't seem to make much difference, if at all, to the f.e.a.r demo but only did a quick test and haven't tried it with that one terminated and the other one left running.
Going to try BF2 in a bit,

MSI Kt6 and NEW Msi 6600GT AGP will not boot up!

My Girlfriend's computer.
I put this new video card in today MSI 6600GT AGP .For the 2nd time.
It frezzing up at startup on this screen....
"GO TO SET UP ...Press F11 , F10 ,Tab: LOGO Ckecking NVRAM..."
I rma the 1st one . Now 2nd 6600 Gt card samething.frezzing up too.
This time I put it in my PC, MSI K8T Neo, 3000 64 processor (Socket 754)
It worked Great!!!
6600GT power cord is hooked up.
So it must be the motherboard?
The 6600Gt card box
MIN.System Requirements ,On the MSI BOX
DOESNT SAY ,You might need to Flash your BIOS!!!!
Ive never flash a bios,To SCARY!!!
MSI KT6 Delta-FISR ....5.10 bios
AMD Barton 2500XP
512 2700 333
True Blue 430 PS
CD burner
floppy
40 gig
I love MSI , Ive built 15 pcs, ALL with MSI motherboards!
Thanks
G

Hello!
Don't think you have to flash the BIOS. Nor do I think there is a problem with the mobo.
Two main reasons for boot problems are:
PSU with not enough grunt - please say something about it.
Memory timings are too tight - don't have any special or ultra settings.
The power cable has not been attached to the graphics card - don't know really if it is needed but I think so.
Please note that a weak PSU might not reveal itself til the power cable is connected.
About flashing BIOS, if you use the LiveUpdate program that came on the MSI install CD, it is no more trouble than upgrading any driver. But please make sure you get the right BIOS, and that it solves the issue you got.

Does Snow Leopard (10.6) DVD have newer Windows drivers?

Does anyone know if Apple has included new drivers on the Snow Leopard DVD?
I'm using Windows 7
thanks in advance

do you know for certain if they have been updated since the Leopard 10.5 Windows drivers?
Yes, they have.
(47217)

Boot Camp 3.0, Win XP and new Audio Drivers for MacBook Pro Core2Duo

I just installed the new drivers in Boot Camp 3.0 on my 2006 Core2Duo MacBook Pro. Before the update, my audio worked perfectly, but after the update, I have a lot of static sound coming from my speakers. I can hear the audio, but it sounds staticy, if that's a word.
Has anyone else had this problem?

Mike Boreham wrote:
You can download the 2.1 drivers separately from here....I think
http://files.geoffgarside.co.uk/bootcamp/Drivers/IDT%20SigmaTel/
Just in the process of trying it myself for audio problems after BC 3.0
It worked.
My sound problems with BC 3.0 gone.
My problem was that there was no internal speaker sound on my MBP with the BC3 driver...only headphones, and no way to switch.
Message was edited by: Mike Boreham

MSI DVD Software Problem

I just purchased a new computer which came with a G4MX440 video card. One of the reasons we picked with card was the DVD player, MSI DVD, and other software that came with it.
The card seems to works very well, but the MSI DVD program, fails right after starting to read the DVD, it appears that the first few frames of the DVD come up and then it crashes.
The computer is running Windows XP Home edition, freshly installed and the latest drivers for the video card for Windows Update.
I have searched far and wide for a new version of the MSI DVD software and cannot find it anywhere.
Can anyone from MSI, or otherwise knowing person, let me know were I can get a version of MSI DVD that works with Windows XP?
By the way, just to try out the hardware and setup, I downloaded trial versions of other DVD players and they work fine. But why buy another player is one came with the video card?
I am assumming the MSI DVD comes with the DVD Decoder software included, right?
Thanks for anyone who can help me out. :O
...Peter

Have you tried Live Update? I experienced the same problem but after trying various methods of my own, I took it to the place we got it from and they fixed it for free.
nForcer420D

Solved flicker problem with newer fglrx drivers

This has been annoying me since the move from 8.29 to 8.30: I have an integrated Xpress 200 on my laptop, and newer proprietary drivers caused the screen to flicker. This has caused me to stick with the older drivers, which restricted upgrades to X.org and the kernel. I was misled by some posts on the Internet to believe that this was the result of using custom modelines.
I have finally solved the problem yesterday. I am posting my findings in case anyone else has been suffering from the same behaviour.
The newer drivers come with an ACPI script, installed under /etc/acpi. The script is invoked every minute and inspects the current power status (i.e., A/C or battery). It then invokes
aticonfig --set-powermode=[MODE]
to adjust the driver to the new settings. Each time this command is executed, it causes the screen to flicker.
Obviously, there is no need to run the script if the power mode has not changed since the last call. I have therefore modified the script to first check the current driver power mode, and execute the mode command only if a new setting is required.
I hope this helps someone.

I need my hand held a bit here...
this seems to be the problem I'm having, ie the ac/battery event being called too frequently, but have no idea how to edit the script. I'm on an asus w3n, will it help to replace apci with asus-laptop and apcid daemon...or just add those and leave acpi daemon?
apologies for my numbnut newbie-ness.

MSI P6N SLI V2 does not boot up from cd/dvd and few other problems

HI
I just bought a computer P6N SLI V2 + E6750. It has following problem. It does not boot from cd.
I have Sata HD. CD/DVD is installed to IDE as a master.
I have done settings in bios so that First boot is cd/dvd and second is sata HD. Anyhow it still goes to the hd and stars windows.
I was only able to boot up from cd when I disabled hd from boot sequency. Meaning I left only cd/dvd there.
Hopefully you pro's can help me.
Then there is another problem. Windows is telling me that it found new pci device. I do not know what device. I have only Graphig card (geforce 8800 gts) installed into pci-E. Drivers and software are also installed, I assume proberly. How to find out what windows thinks it found.
Third problem is onboard soundcard. I cannot get any sound out from the machine. I have downloaded driver from realtek, but still no sound.
Unfortunatelly I do not have original software for motherboard. Only the latest from MSI website.
Hopefully someone can help me.
thanks.

About bootup, i dont know yet.
To find out what windows found, look in devicemanager.
To go there go to controlpanel, system then choose devicemanager.
There you can see what's installed.
Last, your soundcards needs to be enabled in bios, under integrated peripherals there should be a line with "onboard sound", enable this and sound should work, unless its broken.

Mega 180: MSI DVD Writer DR-16B and other issues...

I just get hand on a MSI DVD Writer DR-16B and installed it on my Mega PC unfortunatelly whenever i open the tray using the mega pc front panel button it will hang my mega pc badly and i have to reboot.
However i found a trick: It will not hang if i open the DVD using the Drive button, it is not convenient but at last works...
Other issue i have with my Mega PC:
* If i connect my USB bluetooth dongle the mega PC will not boot
* Sometimes after booting i loose the sound (nvmixer wont load complaining there is no nforce sound chipset on my mega pc !!) and i have to unplug the power for a while to get it back
* The remote control is crappy unless you can stay 2 meter and aim exactly at the mega pc...anybody found a replacement ??
* The last one was one of my RAM was corrupted and make my PC crash every days or so and corrupt some of my files on the HD :( :( it took me 3 months to find the problem....
Do you know if MSI have any plan to fix these issues some days ??? i am getting tired and thinking of replace my Mega PC with some shuttles ....

Thanks for the advice and here are my reply:
For DVD i want a 16x DVD writer i already tried several devices out there and this one will be my latest try..i can accomodate to eject with the drive button for now...I was hopping that using a MSI model would make it compatible but this one is not... :(
For missing sound devices i use the latest nforce drivers and i already found the root cause on this forum, it seems that if you start the PC when the HIFI mode is already open it will lock the sound device in HIFI and the PC mode cannot find it. The solution is to switch off HIFI mode BEFORE going PC mode...well weird
For USB bluetooth well it would have been nice to leave it all the time because i use it to synch my sony erricson P900 anyway i heard that it is a bios firmware problem so i am back to sync with the phone craddle (USB craddle but this one will not freeze the boot) The USB bluetooth is a PCI GW-BH02U.

Availability of Win 10 Drivers for *Current* and *New* Systems

I was wondering if there is any timeframe for posting Windows 10 drives for *Current* and *New* Systems. I notice that there are only like 3 drivers posted so far for the X360 laptops. Even the brand new models which come with Windows 10 preinstalled still have only a smattering of drivers posted. Obviously the drivers exist since the system ships with them installed, why can't they be posted for download? I can understand driver availability taking some time for systems that didn't ship with Win 10, but for those systems that ship with Win 10 already loaded shouldn't those drivers be available to your customers on the the very first day of product shipment? In case you are wondering why it matters if it comes preinstalled already, it's because I plan on doing new, clean install of Win 10 Professional. Your systems are shipping with the Home edition. I have an X360 that is still being sold and shipping with 8.1. I would walk into Best Buy today and buy another one that comes with Windows 10, but won't do that until drivers are available so I can do a clean install. Thanks.

digitaldocent wrote:
After replacing a failed internal hard drive on my HP Pavillion dv2500 laptop, I installed a new Win 7 operating system rather than the Vista software that came on the computer. After installing Windows 7 using a CD/DVD and a few other CD/DVD-based programs, my CD/DVD is no longer working. It's now missing the device driver. Searching HP Laptop Drivers, I find a replacement driver for all operating systems except for Win7!
??? >Where can I find updated/compatible Win7 drivers for my notebook to restore all of it's original features?
??? >Can I install the Vista64 drivers for the original device drivers that came with the Vista operating system if Win 7 drivers are not available?
NVidia provided updated drivers for the graphics chip that installed fine.
Model: HP Multimedia Pavillion dv2500
Running 4 Gb of ram, new 500GB internal HD (500GB external), Win 7 32 bit operating system
Thanks,
John

I have a new MacBook Air with a USB super drive. I put in the DVD and I get nothing. No icon on the desk top and DVD player is no help. How do I play a DVD or eject the one in now?

I have a new MacBook Air with a USB super drive. I put in a DVD and I get nothing. No Icon on the desk top, no help from DVD player. How do I get it to play and how to eject it now that it's in?

There's a defect. The computer is in warranty so take it in for repair.

I have a MacPro with 10.7.2 installed. I want to create a new partition and install 10.5. When I put in the install DVD and restart the computer, it does not restart. What can I do?

I just purchased a MacPro with 10.7.2 installed. I want to install 10.5 on a separate partition.
I created the partition with no issues, now when I put in the 10.5 install DVD and restart the computer, it does not restart.
All I get is a grey screen. no icons, no nothing. I have to shut the computer down.
I really need to do this. I plan on upgrading to FCP X, but I still need to finish some old projects that were done with FCP 7. I need the different boot drives

Mac Pro - Mid 2010
Processor 2 x 2.66 GHz 6-Core Intel Xeon
Memory 8 GB 1333 MHz DDR3 ECC
Graphics ATI Radeon HD 5870 1024 MB
Software Mac OS X Lion 10.7.2 (11C74)
This is a brand new machine that I just purchased from Apple. It was delivered yesterday
The old computer is an old PowerMac G5, but my OS X install disc is a retail version of 10.5.
I also tried the OS X 10.5 install disc that came with my MacBook Pro (2.6 Ghz Intel Core 2 Dual).
Same issue - nothing but a grey screen when the system tries to boot from the DVD

Can anyone point me in the right direction for the link to download Acrobat 9 Standard? I found the link to download 9 Pro but not standard. Old computer crashed and new computer does not have a CDR/DVD rom drive.

Can anyone point me in the right direction for the link to download Acrobat 9 Standard. I found the link to download 9 Pro but not standard. Old computer crashed and new computer does not have a CDR/DVD rom drive.

Hi,
Standard or Pro would be licensed through your serial number, the download link and downloaded file would be the same for both of them.
Pro or Standard would be determined after you put in your serial number.
Download Acrobat products | 9, 8
Thank You
Arjun

HT3910 Original OSX 10.5.6 and app dvd's (that came w/MBP) lost,and have recv'd replacement dvd from Apple. Once hard drive is erased and new OS w/dvd instl'd, how do I insure all applications bundle - that came with MBP - will reinstall?

Original OSX 10.5.6 and app dvd's (that came w/MBP) lost,and have recv'd replacement dvd from Apple. Once hard drive is erased and new OS w/dvd instl'd, how do I insure all applications bundle - that came with MBP - will reinstall?

Your profile says you have 10.6, so why bother with the original 10.5 OS?
But to your question, before you erase anything, make a backup of your data for safe keeping and restoration. Having an external hard drive for this purpose is most useful.

MSI DVD and new detonator drivers

Similar Messages

Maybe you are looking for