Msi Ms-6153 Usb Driver Update

Hello,
I recently bought an Iriver h10 (20 gig) mp3 player. It requires a computer which has a usb port, windows xp and an cpu over 200 mhz. I have all of this, however it fails to recognise the hardware drivers. Now i have contacted Iriver about this, and they have told me the best thing to do would be to update the drivers for the motherboard. I have looked at your driver section and im trying to eliminate the list of options I have for this problem. I couldnt see a download driver part, is it possible to download drivers for the motherboard listed in the topic title.
Thanks again for your swift replys.

PIII-E
550mhz
386ram
Nvidia TNT 2 model 64
Running Windows xp proffesional sp1 (computer wont run sp2 as it seems does not have the graphics drivers)
Running normal usb ports.
this is what happens:
http://img515.imageshack.us/my.php?image=untitled5nh.jpg
http://img515.imageshack.us/my.php?image=untitled14fi.jpg
http://img515.imageshack.us/my.php?image=untitled20fn.jpg
http://img515.imageshack.us/my.php?image=untitled37rk.jpg
http://img470.imageshack.us/my.php?image=untitled48bn.jpg
The device can work on a normal usb 1.1 port.

Similar Messages

Ipad2 usb driver update required on windows 7

Connecting my iPad2 to my Dell Latitude D430 / Windows 7 will start installing the usb driver, after awhile it returns a fail message.
The latest iTunes, has been installed and re-installed (as per Apple proposal), computer was switched off a few times, only to have the same problem.
In the systems overview, the usb connection is recognized as being an apple device, however the driver information requires to re-install the driver.
Help?

Connecting my iPad2 to my Dell Latitude D430 / Windows 7 will start installing the usb driver, after awhile it returns a fail message.
The latest iTunes, has been installed and re-installed (as per Apple proposal), computer was switched off a few times, only to have the same problem.
In the systems overview, the usb connection is recognized as being an apple device, however the driver information requires to re-install the driver.
Help?

MSI Geforce 3 Ti200 Driver Updates for ME

Why can't the drivers be updated past 44.03 in Windows ME?
Multi-boot two operating systems
Abit KG7-Raid
AMD Athlon XP 1800+
512 MB DDR
MSI Geforce3 Ti-200 TD Pro:
MSI 44.03 drivers with Windows ME
Nvidia 52.16 drivers with Windows XP Pro
Creative Sound Blaster Audigy Gamer
Cambridge Sound Works FPS2000 Digital Surround Speakers
NEC 97F 19" Flat Screen Monitor
Linksys 10/100 Etherfast NIC
Maxtor 30 GB HD
IBM 10 GB HD
Yamaha CDRW
Microsoft Internet Keyboard Pro
Microsoft Intellimouse Optical
US Robotix 56K modem (until NOV. 20, 2003 when cable broadband available )
I run all my games on WME so that I have more RAM available for the game (XP is memory hog) and because my flight control setup (CH Force FX {14 programmable buttons}, CH Pro Throttle {20 programmable buttons}, CH Pedals) is not recognized in WXP.
I received HALO as a birthday gift. It loaded fine. I ran it and it continually locked up at the main menu screen of the game. The Audio part of the game continued to advance, but the video got stuck. My wife loaded the game and tried to run it and got the same results, she has only WXP for an OS on an MSI K7T 266 Pro 2 RU motherboard. She upgraded her MSI Geforce3 Ti-200 TD Pro drivers from MSI 44.03 to NVIDIA 52.16 and HALO then ran flawlessly.
MSI has upgraded drivers 45.32 and Nvidia has upgraded drivers 45.23. Both of these drivers locked up my machine each and everytime I installed them. My machine runs the NVIDIA 56.12 drivers without any problem on Windows XP PRO. I had to uninstall the MSI 45.32 and/or NVIDIA 45.23 drivers and reload the MSI 44.03 drivers to get WME to boot up. HALO will not run on the 44.03 drivers. One of the techs from microsoft called me at home the last two nights in a row to try and resolve this issue. Conclusion at end of night one was updated video drivers needed to be installed. Conclusion at end of night two was that there was a hardware problem with the the conclusion that video card was not accepting drivers above 44.03 for the Windows Millenium Edition Operating System. There was no listing at either NVIDIA or MSI video driver site for any drivers beyond 44.03 other than NVIDIA 45.23 or MSI 45.32 respectively.
The burning question is this: As with some of the previous NVIDIA drivers are the new releases compatible with all of the operating systems? I ask this because looking in the NVIDIA 52.16 drivers folder that gets extracted I see references in the read me file to W98,W98SE,WME. Why does the MSI Geforce 3 Ti-200 card accept the NVIDIA 52.16 drivers with WXP PRO and not the NVIDIA 45.23 not the MSI 45.32 drivers with WME (and I assume W98 & W98SE?)
Interested in the response.
Thanks.

Judging from the problems I and several other people on the forum have mentioned, there seems to be a problem with the nVidia 45.23 drivers and video. I get a grey screen with vids unless i turn down the hardware accel to almost nothing. Other people can get vid to show on their tv out. So if you havn't tried an older driver version yet, maybe you could use the good old xp driver rollback in the video device properties.

USB 3.0 device no longer recognized after USB driver update

Hello,
I was setting up a Windows 7 Pro x64 machine. This PC had 2 USB external hard drives plugged into the USB 3.0 ports in the back. These drives were working fine after Windows installation using (I guess) the Windows default driver.
However, after I installed the USB 3.0 driver downloaded from the motherboard vendor, one of the drives wasn't recognized anymore. In fact, Windows told me the device had malfunctioned. I tried reinstalling the USB 3.0 driver and plugging the troubled device
into different ports but these measures didn't help.
That hard drive still works when I plug it in a different machine and this allows me to get the data off it. However, I would like to fix the problem described above and to resume using this hard drive with its original machine.
Any help please? Thanks!
OS: Windows 8 x64 Pro with Media Center. All drivers up-to-date.

Make sure it's the right series usb 3 driver, series 7 or series 8. Series 7 drivers are version 1.x and series 8 are version 2.x. They use the same device id's.

Shuffle 2 - device not recognized... USB Driver?

I got the Shuffle 2nd Gen, plugged it into my PC, and it blinks orange with no install box on Windows, and a "device not recognized" error. Nano works fine on my computer, and my Shuffle works fine on a Mac laptop, so customer service told me it must be a problem with an outdated USB driver.
Here's the problem: I don't know where to get the USB driver update, because my PC is custom made, and I don't know who the manufacturer is. The customer service guy says to find the maker of the motherboard, but I'm not 100% sure how. My Device Manager says "VIA USB Enhanced Host Controller" is the only listed Enhanced (2.0) USB Port. I used a program to find the motherboard manufacturer, and I think it's a "Chaintech 7VJL APOGEE."
Can anyone help me find a USB driver? Might something ELSE be the problem?
(I'm reposting this from a reply I wrote to a different thread)
iPod Shuffle 2nd Generation Windows XP Custom PC

Hey 655micha,
I'm sorry you're having an issue with a USB device. Do you get an error window that pops up? If so what does it say? Have you checked Device Manager? Is is just one device that isn't working? Has it ever worked before? Is it just one USB port in particular that isn't recognizing devices?
What model do you have? Here are the steps to find your product number. FN + ESC is the easiest way to find that information.

USB 3.0 Driver updated and corrupted .

Hi, I am using many of your products on my computer and i just updated the USB 3.0 drivers with the MSI update utility . I had 2 updates and one of them worked and the driver update didnt . I then tried to install it again . I saw that nothing happened so i restarted my computer to try again. I restarted my computer and my keyboard and mouse don't work . So i cant login to reinstall or do anything on my computer. I tried pushing the F8 key and also F2 key on boot. The mouse and keyboard are working fine there . Its only when i start windows and want to login.
Help would be much appreciated. PS i probably dont have a restore point but i'll look into that. ( if i could get directions for using that restore point it would be much appreciated to ).

No need to make 2 identical threads.
>>Please read and comply with the Forum Rules.<<
Continue https://forum-en.msi.com/index.php?topic=183063.0
Topic Locked

I updated to iTunes 10.7 and now iTunes does not see my iPod Touch. It says the Apple Mobile Device USB Driver cannot be installed.

I updated to iTunes 10.7 and now iTunes does not see my iPod touch. After the update I got a message that the Apple Mobile Device USB Driver could not be installed. I have uninstalled and reinstalled iTunes 3 times, but still cannot fix the problem. I have followed the suggested fixes in Apple Support. Any suggestions? Thanks!

Try the actions here for that driver.
iOS: Device not recognized in iTunes for Windows
I would first do this:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Driver update for Win 7 USB issue on nVidia chipset systems now available

This patch is needed for the TouchSmart 600 AIO Desktop series if you haven't installed it.
http://h30434.www3.hp.com/t5/Lockups-Freezes-Hangs/Driver-update-for-Win7-USB-issue-on-nVidia-chipse...

The update is not part of the desktop Win7 update disc from MS or HP - Microsoft has not yet integrated it into Win7, and it is not yet available on Windows Update (it is likely to hit there sometime in January). It was available too late to get it out on HP Update before the holiday break. I don't believe there have been any rolls to the Win7 upgrade disks. I do recommend (while still on Vista) running HP Update and installing all applicable updates - PRIOR to doing the Win7 upgrade. Also - I'd double check the drivers page for your system for any Vista updates as well, best to do any driver/BIOS/Video BIOS updates prior to the Win7 upgrade process. I know that some of them were created before Windows 7 was out - and may not want to install if it sees the newer OS.
As to the fix - this could manifest itself in many ways - but essentially - this resolves system flakyness with USB devices attached . Some internal devices (card readers, touchscreens, some Wireless LAN interfaces) connect via USB - so they could be affected, even if you haven't hooked up anything to your system externally.
Not sure just what problems you were experiencing, so can't say this was the cause (and will be the fix) - but if it applies to your system - I'd definitely give it a shot. I checked a couple of systems that had this update - I see it now on the software drivers and update page for them, so it looks like it rolled out OK.
Happy Holidays...
-DM (an HP employee, but the time and comments here are my own, not my employers)
-DM (HP Retiree)
NOTE: If this helps you or solved your problem - please say thanks by clicking the white kudos star on the left.
If you think this would also help others, please mark 'Accept as Solution' to help them find it easier.

After updating to iTunes 12 the Apple Mobile Device USB Driver is not listed, I use Windows 8.1, how can i solve this?

After I updates ITunes to the latest version (12), ITunes wont find my iphone and Ipad anymore, after searching I found that the Apple Mobile Device USB Driver is not listed anymore, on the support website of Apple it doesnt explain how to solve this,.
I use Windows 8.1 and so now also ITunes 12, both my Iphone 4S and Ipad Air have the latest IOS version.
I hope anybody can tell me how to solve this that the Apple Mobile Device USB Driver is back, thank you

Found a possible solution for me.
While the phone was plugged into my computer and iTunes is CLOSED.
1. I went to Services in Windows.
2. I selected Apple Mobile Device and right clicked and selected "Stop".
3. Then I right-clicked again and selected "Start".
4. Then I went to Device Manager and right clicked my iPhone with the yellow alert icon and selected "Uninstall". You will get a warning about uninstalling the device. Click OK.
5. At the top of Device Manager I clicked the Action menu and selected "Scan for Hardware Changes".
This re-installed the iPhone and everything started working again.

ITunes will not allow me to drag files onto my desktop or a USB drive. The files still come up in finder and I can drag from there but I need entire playlists transferred. It started this when Yosemite went public and I updated out of BETA.

Songs and Playlists cannot be dragged from the itunes app onto desktop or usb drives.
Files can be dragged from Finder but only one at a time.
The issue started when I updated Yosemite out of BETA.
I am running:
OS X Yosemite 10.10
2013 Macbook Pro
iTunes 12.0.1

Hey! I had the same problem you did just today when I was trying to get my second iPhone to sync. What you need to do with music or anything extra that you doing you have to creat a second playlist or picture or anything that you would like to use, so that you can add to the second device that you are going to be using. I am not sure if that will help but it helped me out a lot!! Good luck!

Install Windows XP on external USB drive - MSI 915P

I have a MSI 915P motherboard and i am trying to install Windows XP on my external USB hard drive. Everything is fine installing Windows XP but when it says to reboot the USB drive does not boot. Any help please?

BIOS is set to boot from USB device. It shows Windows XP Home Edition on my internal drive and XP Professional on my USB drive. Internal boots but USB hangs with a dark screen... ??? ??? ???

Time Capsule Hangs with USB Drive Connected after installing 10.5.6 update

The 10.5.6 update basically made my External USB Disk connected to the Time Capsule unusable. I've repaired the permissions as suggested in other posts - this did not fix the problem.
I was unable to perform any incremental backups initially after the 10.5.6 update, so I archived my sparsebundle and created a new one by doing a full fresh backup - which completed successfully. However, after the backup, I was unable to connect to the Time Capsule or the USB drive connected to the Time Capsule via Finder - when trying to connect, my computer hangs and I'm forced to do a hard restart of BOTH my computer AND the Time Capsule, if I just restart one or the other the problem persists. If I let the connection attempt run long enough I get an "Error Code: -8072" message and still have to do a hard restart. After the hard restart of my computer and Time Capsule I'm able to connect to the Time Capsule and the USB drive connected to Time Capsule just fine. However, once the Time Machine backup runs again - the same problem returns, I can no longer access the Time Capsule or the USB drive connected to Time Capsule via Finder and have to do a hard restart of BOTH my computer AND Time Capsule. This 10.5.6 update has been havoc, anyone have the same troubles or ideas for resolving this? Before updating to 10.5.6 my system was working flawlessly with Time Capsule and the connected USB drive.
UPDATE: I've just verified that this problem only occurs with my external LaCie Hard Drive connected to Time Capsule via USB. If I disconnect my LaCie Hard Drive from the Time Capsule and restart the Time Capsule everything works fine (backups, access to Time Capsule Disk from Finder). If I connect the LaCie Hard Drive via USB to the Time Capsule, I am able to access the LaCie Hard Drive in Finder UNTIL the next Time Machine backup. After the first Time Machine backup with the USB drive connected, I can no longer access the USB drive from Finder - Finder hangs and eventually produces "Error Code: -8072". If I disconnect the USB drive, then plug it back in - Finder no longer hangs and I can access the drive connected to Time Capsule until the next backup occurs.
Anybody have ANY ideas? This worked fine before the 10.5.6 update!

I am having a similar problem. Never tried it before installing 10.5.6, but have a Time Capsule (500GB) with a 1TB WD MyBook Essential Edition connected via USB. Hardware is password protected by authorized users of network and needs separate login to access. When I initially set it up, it worked fine (though too difficult to set up). The WD storage drive showed up in Finder window as a subset of the Time Capsule after clicking on the Time Capsule icon. I had an "-8072" error message yesterday that I ignored, but then the file contents of the WD storage drive took forever to be viewed in Finder (though video files could be accessed wirelessly). Today started having a problem... coincidentally?... after a Time Machine backup, and got the message: "The operation could not be completed. An unexpected error occurred (error code -8072)." Now I am unable to get into the WD drive when I click on "Connect As" on the Time Capsule icon in the Finder menu... I just get the -8072 error. I no longer even see the Time Capsule disk as a subset of the Time Capsule icon in the Finder Toolbar.
What is going on???

How to update usb driver...

I've got a MS-6390 and am running Window 2000 Pro. I am trying to get my digital camera to connect, and their support tells me I need to update my usb drivers. My multiple attempts all end in miserable failure as far as I can tell. I'm checking in the device manager and looking at the properties for "VIA USB Universal Host Controller" -- on the driver tab I see "Driver Provider: Microsoft Driver Date: 11/14/1999 Driver version: 5.0.2183.1", which suggests to me that the update I just did was ignored. Can someone *please* give me a clue as to what I need to do????

Quote
Originally posted by Bas
Try installing service pack 3 and let Windows redetect the USB drivers, see what happens.
Thanks, but I've had sp3 for a while now. Nikon support has disowned me and won't talk to me anymore until I have a "supported" usb driver. I broke down last night and bought a cheap plastic compact card flash reader and everything works -- it even auto-starts the Nikon software when I pop in the cf card!
So I have a useable work-around, but I am still bugged that I can't get the update working for this motherboard/os. I don't want to give up on that just yet. I hate it when something that should work, doesn't! X(

After 10.7.2.update cannot see SD card reader in usb drive. Used to appear on desktop and start iPhoto but now nothing happens. It is recognised by system profiler (usb hub), but cannot find it anywhere.

After 10.7.2. update cannot see SD card reader in usb drive. Used to appear on desktop and start iPhoto but now nothing happens. It is recognised by system profiler (usb hub), but cannot find it anywhere. Any ideas?

Zap the PRAM and Reset the SMC, then try again.

I have time machine saving onto two usb drives. The backup is 4.6TB. Each drive is 6TB. Why is time machine only updating one drive? (The other has been the same for two weeks.)

I have time machine saving onto two usb drives.
The total size of the files being backed up is 4.6TB.
Each external USB drive is 6TB. So I have 12 TB of space for Time Machine.
Why is time machine only updating one USB drive? (One drive has been the same for two weeks.)
I have selected both drives in the Time Machine settings panel.
My understanding was that it would do a full backup, and then incremental backups of changed files, getting rid of old copies as needed, and alternate between the two drives.
But it looks like drive A has one complete backup, dated two weeks ago, and drive B is the only one getting action.
There is a red icon on drive one that says the drive needs 120GB more space to do a backup -- which is strange since the whole backup set is only 4.6TB in size, and the drive is 6TB in size...

You could try a clone instead.
Clone - Carbon Copy Cloner (Often recommended as it has more features than some others)
Clone – Data Backup
Clone – Deja Vu
Clone - SuperDuper
Clone - Synk
Clone Software – 6 Applications Tested
Time Machine Versus Clones and Archives
Commonly Used Backup Methods

Msi Ms-6153 Usb Driver Update

Similar Messages

Maybe you are looking for