MSI R6850 Cyclone edition displaying nothing on screen

Hi all. Just got my R6850 today and plugged it into my computer got everything connected but when i turn my computer on my Monitor just says "DVI Power saving mode". Ive tried the DVI to VGA adapter but still nothing and my HDMI cable wont go into the HDMI slot on the card. Ive checked the cables and tried taking it out and putting it back in to hope its fixed but still nothing.I did a search on these forums and there was a thread saying it was something wrong with the card but that was back in February and im guessing they would of fixed that. Any help would be awesome as im kinda annoyed its not working. By the way when my monitor says "Power saving mode" thats when there is something connected but theres no picture coming up on the screen.

Ok sorry ill try and make this more detailed.
Hi all. I just got my MSI R6850 Power cyclone edition Graphics card. Now i will try and put more detail to this post but i havent had much sleep so sorry if i don't add as much detail as i can. Here goes. The numbers on the back of the Card go as following
R6850 CYCLONE 1GD5-S/N602-v244-13sb1107028556. Here is also a link to the Website i bought it from.http://www.ebuyer.com/279842-msi-hd-6850-cyclone-1gb-gddr5-dual-dvi-hdmi-dp-pci-e-graphics-r6850-cyclone-1gd5.
My PC specs are:
AMD Phenom X6 1090T
Gigabyte 880GA-UD3H here is a link to this aswell http://uk.gigabyte.com/products/product-page.aspx?pid=3628#ov. Oh and i looked between my PCIE slots but i couldn't find a model name or number
Corsair GS600 watt PSU
Corsair GS600 Power Supply (CMPSU-600G)
Voltage   +3.3V   +5V   +12V   -12V   +5Vsb
Max. Current   25A   25A   48A   0.8A   3A
Max Combined Wattage   150W   576W   9.6W   15W
600 Watts @ 40°C ambient temperature
Samsung HD103SJ Spinpoint F3 1TB Hard Drive SATAII 7200rpm 32MB Cache
4GB of Corsair XMS3 RAM 1600MHZ.9-9-9-24
Does DVD player matter? if so i got some cheap DVD player.not sure of the name.
Samsung HD103SJ Spinpoint F3 1TB Hard Drive SATAII 7200rpm 32MB Cache
Thats all i could think of. I hope its as much as you need since sleep deprived= me not being as smart as i am and missing stuff out. Now to the problem. So i plugged in my MSI HD6850 Cyclone edition and turned my computer on. Sadly nothing came up on my monitor. Now i had read a thread on the 6850's having this problem but i just bought mine and the thread was back in February so i dont think i have the same cards. Also i got a free copy of Deus Ex:Human Revolution if that helps. Now i dont know if i should send back to Ebuyer where i bought it from or send it in for repairs which is why im here. Once again sorry if this isnt enough details because im so eager to get this card working .

Similar Messages

Request UEFI GOP VBIOS For MSI r6850 Cyclone PE

i want to enable Fastboot Mode for Windows 8 but my VGA Bios isn't a UEFI GOP
my garphic card : MSI R6850 CYCLONE 1GD5 PE/OC
S/N : 602-V244-11SB1104096458
current VBios : mediafire.com/?y2eajeba1q4elcv
System Spec
AMD FX8320 @4.30GHZ
Asrock 990FX Fatal1ty (Lastest Bios 1.90 )
MSI 6850 Cyclone PE/OC ( single card )
plextor M5S SSD 128MB
WD1002FAEX
Corsair TX750W V1 PSU
Creative Audigy 2 ZS Sound Card
Windows 8 Pro 64Bit
thank you for helping

Quote from: tchoi.tab on 09-March-15, 16:27:44
Here is GOP vBIOS for 6850 OC Edition.
Flash it with atiflash etc...
Please resurrecting old topics!
>>Please read and comply with the Forum Rules.<<
Attachments removed for safety of other's cards!

MSI R6850 cyclone fake advertisement

Hello.
I bought a MSI R6850 cyclone power edition OC and before doing that, several websites (related directly with MSI) said that I would get a free copy of the game DIRT 3. That was one of the reasons why I bought this card, and I feel pretty disappointed with that because I haven't found the way to receive that game so far.
I changed from Sapphire to MSI because of the great reviews I found about MSI products on guru3D.com, and when Sapphire promised me a free copy of DIRT 2 years ago they kept their word.
links:
http://sites.amd.com/us/game/games/Pages/dirt-3.aspx
http://event.msi.com/vga/Dirt3/
http://www.msi.com/news-media/news/1252.html
Thanks for reading.
Please excuse me for my broken English, I'm still learning it.

*Due to regional differences in product and inventory, other application(s) may be bundled with MSI graphics cards. When making a purchase, be sure to select a MSI graphics card box with a "DiRT 3" sticker attached to ensure that the full game activation code for " DiRT 3" is included.
What I put in above is at the very bottom of the MSI news media link you posted.
You got one (older stock) without the sticker on the box or the offer simply is not available where you live.
You need to ask the people at the store where you purchased the card.
No fake/false advertising at all.

MSI R6850 Cyclone PE/OC No signal, loud fan

I bought an R6850 Cyclone PE/OC and installed it. The first time I booted I got video but my computer froze (I thought, now it seems it just takes a very very long time to POST when I had the DVD drive connected) so I turned it off. The next time I booted (after disconnecting the DVD drive) there was no video and the fan on the card went at full speed but it would boot into Windows.
At first I thought it was a PSU issue so I changed to a better one (XFX 550W) but it is still the same. I tried with my old card and it works just fine. I've also tried clearing the CMOS, reseated the card, made sure the 6 pin power cable was connected, different DVI outputs but still no video.
My specs are:
Motherboard: Acer MCP73VE
BIOS: American Megatrends R01-C2
CPU: Intel Core2Duo E4700 2.6ghz
Memory: 2x1GB DDR2-800
GPU: MSI R6850 Cyclone PE/OC
HDD: 500gb WD IDE, 320gb Seagate SATA, 80gb Seagate IDE
OS: Windows XP Pro 32bit
PSU: XFX 550W Core Edition +12V~44A, +5V~24A, +3.3V~24A

Ok, i'm on another PC now and the card is working fine. It must not like the chipset on my old motherboard or something.
Anyways, the only issues i'm having now are stuttering with some games but I think I can fix that by updating Catalyst.

G5 boots but displays nothing on screen and sometimes white screens and boots from CD. Help?

I have a G5 (1.8 Ghz/DP/8GB RAM) and it has a problem.
When it does show something on screen it shows a white screen and will boot from a CD (OS X or Linux) but when it doesn't it show anything on screen and the fans rev up (This happens whether is shows nothing or white screens) Does anyone know how to fix this?
PS: When it boots from the CD everything works fine.

Backup your data if you have a successful boot. You have no idea what may be damaged or not.
See this data recovery routine if needed:
https://discussions.apple.com/docs/DOC-1689

MSI R6850 Cyclone: No Video Out

Hello, very new to board, I will try to be complete with information...
Gigabyte GA-Z68XP-UD3 MB
CORSAIR Enthusiast Series TX650
Intel Core i3 2120
I built the system, had everything working, put it on the shelf to wait for some parts and when I started a week later, up I got no video out from card. I get video out from mainboard through HDMI (Intel HD2000) but I cant get video card to respond. Replaced Mainboard and still have same results (or lack of results). I tried card on an old P5K-E with Core2 Duo, but am not sure about my PSU and mainboard config I got a video card error (bios beeps) on the P5K-E.
What is weird is that everything was working great and then nothing after doing nothing special to system in the interim. I hooked up mainboard headers and that is it. To test I removed all mainboard headers except power sw and still nothing. Any suggestions? Cards don't normally just go bad do they? I appreciate your help and can give more info if necessary.

Quote
Cards don't normally just go bad do they?
Usually not. But if you can confirm that the card does not work with proper power supply in another system and the issue remains the same even though you replaced the mainboard and tested all its PCI-E x16 slots, then it somehow got damaged against all likelyhood. Who knows: Perhaps there was some sort of static discharge at some point that broke something.
Another video card works fine in your system?
If that is the case, I would suggest you get the card RMAed as fast as possible in order to get a replacement as soon as possible.

R6850 Cyclone OC Edition is causing Crash Problem !!

Using R6850 Cyclone OC Edition for my PC with configuration as below, got all the drivers up to date, and BIOS updated too. But each time I am using my PC normally for video watching or you tube, my PC crashes !!!! with a Black screen and nothing more. !
In-order to validate my doubt, I swapped the VGA input port of monitor to my default Intel VGA out port, and removed the power connector cables connected to the Gcard. It didnt crash at all. Hence after that I did some research and found out many people had there share of similar problems and were solved by changing their PSU. Please suggest me the solution, weather its a PSU or Gcard Problem. I have already RMAed my Gcard for the problem for the third time !!
Also, while surfing a webpage, I got a pixelated screen, and then my PC restarted. But the the surprising thing is it never crashes when I am playing games !!! Although it flickers randomly most of the times.
Any help would be greatly appreciated.
Here is my PC info:
Intel Desktop Board DG41RQ
MSI R6850 Cyclone OC edition
cooler master RS-460-pcar-D3
4gb DDR2 Memory
Windows 7 Ultimate SP1
AMD catalyst 13.1
PS: I did run those tests with funmark and Prime95, with no crashes.

can you test the card in another PC to isolate the problem?
have you tried msi vga drivers for your card?

MSI Radeon HD 6850 Cyclone edition OC seems faulty

I have a new graphics card, MSI 6850 cyclone edition OC and it crashes alot when I try to run games, usually when the game is loading. I RMA'd with the retailer (OCUK) after I'd done pretty much everything I could I.e. update bios, reinstal windows, installing the drivers cleanly etc... and they said it's not faulty, but the problem persisted.
I tried underclocking my card from about 860|1100 to 600|1000 and it seems much more stable now and I can almost always run my games without it crashing.
But I shouldn't have to underclock it from the default factory settings.
My system specs are:
Motherboard: Gigabyte EX58-UD3R
Processor: Intel core i7 920 @ 2.67Ghz (was OC'd to 3.4Ghz, but I set the clock to default trying to fix the problem)
Memory: DDR3 6GB corsair
(new)Graphics card: msi ati radeon hd 6850 cyclone power edition
(old)Graphics card: Radeon HD 4650
power: corsair, TX650W, Model: CMPSU-650TX
I've tried it on a number of clock settings and I've got these results:
860 core | 1100 Memory = crashes (default)
800 core | 1100 Memory = crashes
750 core | 1100 Memory = crashes
700 core | 1000 Memory = fine
600 core | 1000 Memory = fine
for some reason the card can't clock to anywhere near the default settings, it crashes even at 750 which is 110MHz below the factory settings.
Also, the other day when I logged my desktop went like this:
but it's stopped doing that now it seems, might be because I put my old card back in for a bit, old card was 100% fine in every way. I have the new card back in now though.
I've overvolted it from 1149mV to 1200mV and it seems to have made the card more stable. It generally doesn't crash loading or during games now (still does occasionally), but it does seem to crash alot streaming things like bbc iplayer.
I've made quite a few topics on OCUK about it and since it was sent back to me I've been told by everyone on there that it sounds definitely faulty and the card manufacturer MSI are my best bet at getting the issue sorted now. Somebody also said it sounds like a similar problem with some cards awhile back: Quote
Reminds me of the GTX480 SOC fiasco. Lots of them wouldn't run at stock clocks and RMAs came back no fault found.. Voltage increase or back off the clocks were the only solution..
All comments on my problem are appreciated,
Dan.

Hi! There are currently tons of unresolved issues with the MSI HD68xx series products. Better off with non-MSI products and buy into the HD69xx series.
Skip the HD68xx series as nothing ever works right. SVET might get ya answers but Svet only works the Forums and if you really have issues MSI company won't hear it from here.
You need to contact the expensive route calling MSI themselfs which I heard Customer Support and Technicial Depts are worthless. I tried when I had HD3800's and even AMD/ATI didn't care.
You are now a Happy Owner of a Bad Product.!!!

Mac G3 plays startup music but nothing on screen

Hi,
Basically, my friend gave me this Mac G3 tower (Blue one) and showed me round his that it worked. When I got home and plugged it all in, I turned on the G3. It then played the start-up music but then displayed nothing on screen.
Does anyone know why this is happening? It works perfectly fine with my friends monitor.

Hi Don,
I'm having a similar problem with a B&W 350 MHz (rev 1 I think). I get the start up tone and nothing appears on the monitor. Not sure if the machine is actually booting or not.
I am trying to repair this machine for a friend. They had been having a problem with the machine booting into a blue screen. I suspected a corrupt directory, so I ran Disk Utility (from another machine) and also Disk Warrior. Both Disk Utility's Disk Repair feature and Disk Warrior found problems. Disk Warrior was able to successfully rebuild the directory.
I had removed the hard drive from the machine and put it in an external casing in order to run Disk Repair and Disk Warrior. Upon putting the hard drive back into the B&W and booting the machine, I was able to successfully boot the machine into Tiger. I tested the machine for a few minutes and it seemed to work fine.
Next, I ran software update and installed a new version of Safari and then after the required re-boot, tried to repair disk permissions. During the repair of disk permissions, the machine froze up completely. The clock stopped ticking and there was no mouse or keyboard response. I tried using the re-boot button on the front of the machine, but the machine would not fully re-boot. I get a boot tone, but no video.
I tried re-setting the CUDA chip by pressing the re-set button on the logic board, but to no avail.
Finally, I did take the battery out and had it tested at Radio Shack. The battery is showing a good 3.6 volts.
I have a second B&W (300 MHz) that is basically doing the same thing. Do you know what could be causing the lack of video signal?
Cheers,
Thomas

MSI 6850 OC Edition Black Screen when playing Crysis Warhead

Random crashes in Crysis Warhead DX10. It also happened once in Command and Conquer 3 Kanes Wrath DX9.
I get a black screen monitor turns off and the sound goes buzz the system then hangs. The reset button wont work. The MSI LED BIOS code displays C2. Power off then on. The system is stable 2 hours Prime95 CPU only hits 150F. Ran Furmark GPU stable test 1 hour. Turned the fan to manual and set to high the gpu stays around 70c with Furmark GPU. Memtest overnight. No problems. Tried CAT 10.12 10.11 10.10 the MSI downloaded version. Nothing. Clean drivers out. I updated SPTD to 1.75 from per another posts advice. Seems something is really wrong with the drivers and rendering certain objects reboots the card. The card is rock solid on stablity tests and Futuremarks benchtests.
Nvidia Physx game driver uninstalled. Still crashes
Now testing it with SPTD uninstalled. Running tests have my doubts.
The system
AMD 1090T no OC
MSI 890FX
OCZ AMD Special 4GB 1600
MSI 6850 Stock OC Version
WIN 7 x64 Pro

Quote from: brains1 on 05-January-11, 06:59:12
2 hour test ran. No errors. Seems like a wimpy test. The GPU Temp never went over 42c. 360-370 FPS.
Already ran a 2 hour test with Furmark GPU with out errors or artifacts. 2 hour CPU only Prime95 test. Memtest over night. System is stable by all accounts. Just when playing some games it will completely mess the system up.
For those MSI motherboard people. Why would the LED Motherboard light say 2C or maybe it was C2. Why would the system not reboot with the reset button. The 6850 card some how goes in to lala land.
Quote
2 hour CPU only Prime95 test.
which one? Can you test with Orthos?
Run Orthos: http://sp2004.fre3.com/beta/orthos_exe_20060420.cab
Select priority 9,
Select "Large, in-places FFT's",
Then click on "Start" and let's test overnight.
See if your machine can survive
Quote
MSI 890FX
OCZ AMD Special 4GB 1600
how they are running?
show us screenshots from cpu-z memory page

I would like to share my ipad on my Windows machine. I got the Ipad to HDMI adaptor but nothing is displayed on the screen... Do I need any additional softwares?

I would like to share my ipad on my Windows machine. I got the Ipad to HDMI adaptor but nothing is displayed on the screen... Do I need any additional softwares?
Actually I would like to have the Ipad connected to pc and then run an application on the ipad (which is shown on my windows machine) and record it on the windows machine... Is this feasible?

If you have an HDMI connection on your computer, it is most likely an output, it won't recieve a signal unless it's on a video capture card. Recording to the PC could be a difficlut task. HDMI is encrypted to keep you from copying but there are ways to do it. It would also depend on what content you intended on recording. If it's movies you have purchased or rented, it would be illegal.

Screen Painter displays nothing and becomes hang.

<b>Screen Painter displays nothing and becomes hang.</b>
To duplicate:
1. Create a new table and fields. (I created using SQL Enterprise Manager).
2. Create a new form using Screen Painter.
3. Bound several items to column to field of table created on step#1
4. Save and close the form in .srf.
5. Open the saved form and Screen Painter becomes hang.
Is there any mistakes in my steps? Or this is just a Screen Painter Bug?
Thanks in advance,
Jemmy Sentonius

When creating new tables, make sure to create them via SAP. You can achieve this by either manually creating tables via SAP client or programmatically using DIAPI.
When you bind data to a form via UIAPI (either programmatically or via xml/srf) SAP needs to know the tables you refer to.
When you create tables using Enterprise Manager, SQL Server knows about the tables, SAP does not. Hence your error, I guess.
However Screenpainter should not hang when referencing "invalid" (to SAP) tables. This behaviour ought to be corrected.
HTH Lutz Morrien

Ios8.....hate!'After upgrading my iPad will do nothing except refuse to take a charge display a black screen or a battery red line or the occasional apple logo. Have tried soft boot and hard boot and nothing!,!

After upgrading my iPad will do nothing except refuse to take a charge display a black screen or a battery red line or the occasional apple logo. Have tried soft boot and hard boot and nothing!,!

Hello there, Victoria.
Great job on troubleshooting on your own. The following Knowledge Base article offers up some great steps to review and additional recomendations:
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Resolving issues
If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
Inspect the connector at the bottom of the phone:
Make sure that there are no bent pins in the connector.
Make sure that the connector is free from debris.
If there are bent pins or debris, please contact Apple Support.
Otherwise, continue troubleshooting.
Make sure that the outlet you're using works.
Make sure that the Apple USB cable and Apple USB power adapter work.
Plug the device in to power and let it charge until your device turns on. This could take between 10 and 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
If the device still exhibits an issue, try turning your device off and then on again while connected to power.
If the issue persists, please contact Apple Support.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Nothing will display on my screen

I've lost the display on my screen. It will just light up. It still plays, but I have no control of it. It was also difficult to start. I had to hold the meneu and select button at the same time. Any thouhgts?

Try resetting the nano by depressing the center button and menu key.
If that does not work, I would redo the firmware by restoring.

My ipad is frozen and is displaying a black screen. Ive tried holding down the power off button but the apple displays and then nothing happens.

my ipad froze during a upgrade. it might have run out of battery. i brought it with me to work and i'm charging it but it keeps displaying a black screen. it wont even let me power it off.

If it is totally black, all the time, and you can never see anything on the screen, I agree with stef7 - it needs replacing. Is it still under the manufacturer's warranty?
Is the proximity sensor (dot(s) on top of the phone) covered by a case or screen protector? That would make the phone "think" you are holding the phone at your ear to talk, and will turn off the screen to save battery..

MSI R6850 Cyclone edition displaying nothing on screen

Similar Messages

Maybe you are looking for