Screen Painter displays nothing and becomes hang.
<b>Screen Painter displays nothing and becomes hang.</b>
To duplicate:
1. Create a new table and fields. (I created using SQL Enterprise Manager).
2. Create a new form using Screen Painter.
3. Bound several items to column to field of table created on step#1
4. Save and close the form in .srf.
5. Open the saved form and Screen Painter becomes hang.
Is there any mistakes in my steps? Or this is just a Screen Painter Bug?
Thanks in advance,
Jemmy Sentonius
When creating new tables, make sure to create them via SAP. You can achieve this by either manually creating tables via SAP client or programmatically using DIAPI.
When you bind data to a form via UIAPI (either programmatically or via xml/srf) SAP needs to know the tables you refer to.
When you create tables using Enterprise Manager, SQL Server knows about the tables, SAP does not. Hence your error, I guess.
However Screenpainter should not hang when referencing "invalid" (to SAP) tables. This behaviour ought to be corrected.
HTH Lutz Morrien
Similar Messages
-
Apple should make a macBook where the screen can turn around and become touch screen, for easier use
Apple should make a macBook where the screen can turn around and become touch screen, for easier use. especially for when i go to uni
Why touch and swivel screens arent a good idea on a laptop:
The so-called Gorilla arm: Gorilla arm is a term describing the tired arms users get after reaching out and touching a screen for a long time.
Added thickness: Touch screen panels are usually thicker than non-touch ones—especially if the touch panel has an active digitizer for pen support.
Possibly shorter battery life: Touch screens require more power. Laptop Magazine compared a couple of touch screen laptops with their non-touch counterparts (same model and size) and found that the non-touch laptops lasted over an hour longer.
Easy to break: Swivel screens are notoriously prone to break, especially the hinge and the cable that feeds the screen from the logic board which is being constantly twisted.
And thats what the Ipad is for. -
Hello,
I just purchased a Creative Cloud Lightroom + Photoshop subscription and installed Creative Clood. It launches but displays nothing and seems to refresh indefinitly. What to do?
Here is what I get :
Nothing happens. It keeps on turning. What should I do?
Thx!
Quentin GiroudFound that. Worked for me :
Close the Creative Cloud application.
Navigate to the OOBE folder.
Windows: [System drive]:\Users\[user name]\AppData\Local\Adobe\OOBE
Mac OS: /Users/[user name]/Library/Application Support/Adobe/OOBE folder
Delete the opm.db file.
Launch Creative Cloud. -
When I open the fire fox,there is a lot of tabs open same time and becomes hang.It is not working.
When I open firefox there appears alot of tabs and shows that are "loading".but after three or four seconds the fire fox becomes hanged. after that I have to use "End Task Manager" to close the window.I have several time uninstalled and reinstalled the Fire Fox. But the same problem continues. What I have to do solve this problems.i wish to use fire fox for further use.
Have a look at these two articles
# [[How to set the home page]]
# [[Firefox hangs]]
After reading the first article, you should for example be able to set firefox to open a single blank page when it starts, and not attempt to open previously open tabs.
If firefox has a serious problem with opening tabs it sometimes gives you an option to restore and start again, but it would appear in your case it tries to open many tabs only to crash a bit later. Look through the second article particularly the notes about how to [[firefox hangs#w_duplicate-session-restore-files|remove session restore files]] -
Grey screen at boot up and then hang up
I've tried to use my 2008 iMac running MAC OS 10.7.5 this morning and it won't boot. I get to the grey screen where it would normally display the apple logo and then the login prompt, but hangs up before that point.
I've sucessfully booted it into safe mode and all the hardware checks I've performed suggest that everything is ok.
Via safe mode I've found the following boot information - located in the "/var/log/system.log" file...
Feb 25 10:08:28 localhost bootlog[0]: BOOT_TIME 1361786908 0
Feb 25 10:08:30 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
Feb 25 10:08:39 localhost com.apple.launchd[1] (com.apple.powerd): Unknown value for key POSIXSpawnType: Interactive
Feb 25 10:08:39 localhost com.apple.launchd[1] (com.apple.sandboxd): Unknown value for key POSIXSpawnType: Interactive
Feb 25 10:08:51 localhost UserEventAgent[11]: starting CaptiveNetworkSupport as SystemEventAgent built Jun 13 2011 17:29:21
Feb 25 10:08:51 localhost UserEventAgent[11]: CaptiveNetworkSupport:CreateInterfaceWatchList:2788 WiFi Devices Found.
Feb 25 10:08:51 localhost UserEventAgent[11]: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
Feb 25 10:08:51 localhost UserEventAgent[11]: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
Feb 25 10:08:52: --- last message repeated 1 time ---
Feb 25 10:08:51 localhost UserEventAgent[11]: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
Feb 25 10:08:51 localhost UserEventAgent[11]: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
Feb 25 10:08:52: --- last message repeated 1 time ---
Feb 25 10:08:52 localhost UserEventAgent[11]: CertsKeychainMonitor: configuring
Feb 25 10:08:53 localhost UserEventAgent[11]: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
Feb 25 10:08:53: --- last message repeated 1 time ---
Feb 25 10:08:53 localhost UserEventAgent[11]: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
Feb 25 10:08:53 localhost airportd[28]: _processDLILEvent: en1 attached (down)
Feb 25 10:08:53 localhost mDNSResponder[12]: mDNSResponder mDNSResponder-320.16 (Jul 19 2012 21:07:07) starting OSXVers 11
Feb 25 10:08:54 ze_monkey-imac configd[16]: setting hostname to "ze_monkey-imac.local"
Feb 25 10:08:54 ze_monkey-imac configd[16]: network configuration changed.
Feb 25 10:08:55 ze_monkey-imac systemkeychain[40]: done file: /var/run/systemkeychaincheck.done
Feb 25 10:08:55 ze_monkey-imac configd[16]: network configuration changed.
Feb 25 10:08:55: --- last message repeated 1 time ---
Feb 25 10:08:55 ze_monkey-imac mDNSResponder[12]: D2D_IPC: Loaded
Feb 25 10:08:55 ze_monkey-imac mDNSResponder[12]: D2DInitialize succeeded
Feb 25 10:08:57 ze_monkey-imac UserEventAgent[11]: ServermgrdRegistration cannot load config data
Feb 25 10:08:58 ze_monkey-imac configd[16]: network configuration changed.
Feb 25 10:08:58 ze_monkey-imac UserEventAgent[11]: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Probe
Feb 25 10:08:58 ze_monkey-imac UserEventAgent[11]: CaptiveNetworkSupport:CNSPreferences:60 Creating new preferences
Feb 25 10:08:58 ze_monkey-imac UserEventAgent[11]: CaptiveNetworkSupport:CaptiveStartDetect:2343 Bypassing probe on ze_monkey-wireless because it is protected and not on the exception list
Feb 25 10:08:58 ze_monkey-imac UserEventAgent[11]: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Unknown
Feb 25 10:08:58 ze_monkey-imac configd[16]: network configuration changed.
Feb 25 10:09:01 ze_monkey-imac com.apple.pfctl[66]: No ALTQ support in kernel
Feb 25 10:09:01 ze_monkey-imac com.apple.pfctl[66]: ALTQ related functions disabled
Feb 25 10:09:02 ze_monkey-imac com.apple.ucupdate.plist[59]: ucupdate: Checked 1 update, no match found.
Feb 25 10:09:03 ze_monkey-imac VMware Fusion 683826[90]: Starting VMware Fusion:
Feb 25 10:09:03 ze_monkey-imac com.vmware.launchd.vmware[87]: Feb 25 10:09:03 ze_monkey-imac.local VMware Fusion 683826[90] <Notice>: Starting VMware Fusion:
Feb 25 10:08:56 ze_monkey-imac com.apple.usbmuxd[58]: usbmuxd-296.3 on Jul 25 2012 at 00:28:37, running 64 bit
Feb 25 10:08:57 ze_monkey-imac ntpd[54]: proto: precision = 1.000 usec
Feb 25 10:08:58 ze_monkey-imac loginwindow[72]: Login Window Application Started
Feb 25 10:08:58 ze_monkey-imac mds[70]: (Normal) FMW: FMW 0 0
Feb 25 10:09:02 ze_monkey-imac XProtectUpdater[56]: Ignoring new signature plist: Not an increase in version
Feb 25 10:09:02 ze_monkey-imac com.apple.launchd[1] (com.apple.xprotectupdater[56]): Exited with code: 252
Feb 25 10:09:12 ze_monkey-imac loginwindow[72]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
Feb 25 10:09:14 ze_monkey-imac airportd[28]: _doAutoJoin: Already associated to “ze_monkey-wireless”. Bailing on auto-join.
Feb 25 10:09:16 ze_monkey-imac loginwindow[72]:
O3REQUIRE FAILED: ret == 0
- file: /SourceCache/BezelServices/BezelServices-232.3/Utilities/Utilities.c
- line: 91
Feb 25 10:09:16 ze_monkey-imac loginwindow[72]: Failed to lookup Bezel UI Server port: Bootstrap Unknown Service.
Feb 25 10:09:16 ze_monkey-imac loginwindow[72]: Login Window Started Security Agent
Feb 25 10:09:16 ze_monkey-imac com.apple.launchctl.LoginWindow[110]: com.apple.findmymacmessenger: Already loaded
Feb 25 10:09:17 ze_monkey-imac SecurityAgent[115]: Echo enabled
^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@ ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@ ^@^@^@^@^@^@^@^@^@^@
^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@ ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@ ^@^@^@^@^@^@^@^@^@^@
^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@ ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@ ^@^@^@^@^@^@^@^@^@^@
^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@ ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@ ^@^@^@^@^@^@^@^@^@^@
^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@ ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@ ^@^@^@^@^@^@^@^@^@^@
^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@ ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@ ^@^@^@^@^@^@^@^@^@^@
^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@ ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@ ^@^@^@^@^@^@^@^@^@^@
^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@
I'm not sure what the "O3REQUIRE FAILED" relates to and also the control characters at the end!?! Does anyone know?
Also does anyone know how to fix this?
Any help you can provide would be useful.
ThanksOk, I've uninstalled both VMware and MacFUSE using the documented procedures taken from official websites.
I've rebooted and I still have the same problem... hangs before the login screen appears. I can still login via safe mode however.
Do you want me to post the output from the three steps again?
F.Y.I. Latest contents of "/var/log/System.log" from hang up ->
Mar 1 11:06:23 localhost bootlog[0]: BOOT_TIME 1362135983 0
Mar 1 11:06:25 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
Mar 1 11:06:37 localhost com.apple.launchd[1] (com.apple.powerd): Unknown value for key POSIXSpawnType: Interactive
Mar 1 11:06:37 localhost com.apple.launchd[1] (com.apple.sandboxd): Unknown value for key POSIXSpawnType: Interactive
Mar 1 11:06:44 localhost UserEventAgent[11]: starting CaptiveNetworkSupport as SystemEventAgent built Jun 13 2011 17:29:21
Mar 1 11:06:44 localhost UserEventAgent[11]: CaptiveNetworkSupport:CreateInterfaceWatchList:2788 WiFi Devices Found.
Mar 1 11:06:44 localhost UserEventAgent[11]: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
Mar 1 11:06:44 localhost UserEventAgent[11]: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
Mar 1 11:06:44: --- last message repeated 1 time ---
Mar 1 11:06:44 localhost UserEventAgent[11]: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
Mar 1 11:06:44 localhost UserEventAgent[11]: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
Mar 1 11:06:45: --- last message repeated 1 time ---
Mar 1 11:06:45 localhost UserEventAgent[11]: CertsKeychainMonitor: configuring
Mar 1 11:06:47 localhost airportd[28]: _processDLILEvent: en1 attached (down)
Mar 1 11:06:47 localhost UserEventAgent[11]: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
Mar 1 11:06:47 localhost mDNSResponder[12]: mDNSResponder mDNSResponder-320.16 (Jul 19 2012 21:07:07) starting OSXVers 11
Mar 1 11:06:48 ze_monkey-imac configd[16]: setting hostname to "ze_monkey-imac.local"
Mar 1 11:06:48 ze_monkey-imac configd[16]: network configuration changed.
Mar 1 11:06:48 ze_monkey-imac systemkeychain[40]: done file: /var/run/systemkeychaincheck.done
Mar 1 11:06:49 ze_monkey-imac configd[16]: network configuration changed.
Mar 1 11:06:49: --- last message repeated 1 time ---
Mar 1 11:06:49 ze_monkey-imac mDNSResponder[12]: D2D_IPC: Loaded
Mar 1 11:06:49 ze_monkey-imac mDNSResponder[12]: D2DInitialize succeeded
Mar 1 11:06:50 ze_monkey-imac UserEventAgent[11]: ServermgrdRegistration cannot load config data
Mar 1 11:06:51 ze_monkey-imac configd[16]: network configuration changed.
Mar 1 11:06:51 ze_monkey-imac UserEventAgent[11]: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Probe
Mar 1 11:06:51 ze_monkey-imac UserEventAgent[11]: CaptiveNetworkSupport:CNSPreferences:60 Creating new preferences
Mar 1 11:06:51 ze_monkey-imac UserEventAgent[11]: CaptiveNetworkSupport:CaptiveStartDetect:2343 Bypassing probe on ze_monkey-wireless because it is protected and not on the exception list
Mar 1 11:06:51 ze_monkey-imac UserEventAgent[11]: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Unknown
Mar 1 11:06:51 ze_monkey-imac configd[16]: network configuration changed.
Mar 1 11:06:54 ze_monkey-imac com.apple.ucupdate.plist[59]: ucupdate: Checked 1 update, no match found.
Mar 1 11:06:54 ze_monkey-imac com.apple.pfctl[66]: No ALTQ support in kernel
Mar 1 11:06:54 ze_monkey-imac com.apple.pfctl[66]: ALTQ related functions disabled
Mar 1 11:06:55 ze_monkey-imac launchdadd[21]: FAILURE: Could not send MIG reply: 0x10000003
Mar 1 11:06:56 ze_monkey-imac com.apple.usbmuxd[58]: usbmuxd-296.4 on Dec 21 2012 at 16:11:14, running 64 bit
Please also find attached the contects of the "/var/log/kernel.log" file in parallel. Not sure whether this is helpful?
Mar 1 11:06:41 localhost kernel[0]: Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Mar 1 11:06:41 localhost kernel[0]: vm_page_bootstrap: 1007088 free pages and 33296 wired pages
Mar 1 11:06:41 localhost kernel[0]: kext submap [0xffffff7f80736000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000736000]
Mar 1 11:06:41 localhost kernel[0]: zone leak detection enabled
Mar 1 11:06:41 localhost kernel[0]: standard timeslicing quantum is 10000 us
Mar 1 11:06:41 localhost kernel[0]: mig_table_max_displ = 73
Mar 1 11:06:41 localhost kernel[0]: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
Mar 1 11:06:41 localhost kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
Mar 1 11:06:41 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
Mar 1 11:06:41 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Mar 1 11:06:41 localhost kernel[0]: calling mpo_policy_init for Sandbox
Mar 1 11:06:41 localhost kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
Mar 1 11:06:41 localhost kernel[0]: calling mpo_policy_init for Quarantine
Mar 1 11:06:41 localhost kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
Mar 1 11:06:41 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Mar 1 11:06:41 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Mar 1 11:06:41 localhost kernel[0]: MAC Framework successfully initialized
Mar 1 11:06:41 localhost kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
Mar 1 11:06:41 localhost kernel[0]: IOAPIC: Version 0x11 Vectors 64:87
Mar 1 11:06:41 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5]
Mar 1 11:06:41 localhost kernel[0]: PFM64 (36 cpu) 0xf10000000, 0xf0000000
Mar 1 11:06:41 localhost kernel[0]: [ PCI configuration begin ]
Mar 1 11:06:41 localhost kernel[0]: console relocated to 0xf10030000
Mar 1 11:06:41 localhost kernel[0]: PCI configuration changed (bridge=2 device=2 cardbus=0)
Mar 1 11:06:41 localhost kernel[0]: [ PCI configuration end, bridges 5 devices 18 ]
Mar 1 11:06:41 localhost kernel[0]: AppleIntelCPUPowerManagement: (built 16:32:09 Aug 23 2012) initialization complete
Mar 1 11:06:41 localhost kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 00254bfffea158e2; max speed s800.
Mar 1 11:06:41 localhost kernel[0]: USBMSC Identifier (non-unique): 575845393038544E34363432 0x1058 0x704 0x105
Mar 1 11:06:41 localhost kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
Mar 1 11:06:41 localhost kernel[0]: Pthread support ABORTS when sync kernel primitives misused
Mar 1 11:06:41 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
Mar 1 11:06:41 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
Mar 1 11:06:41 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
Mar 1 11:06:41 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
Mar 1 11:06:41 localhost kernel[0]: AppleIntelCPUPowerManagementClient: ready
Mar 1 11:06:41 localhost kernel[0]: BTCOEXIST off
Mar 1 11:06:41 localhost kernel[0]: wl0: Broadcom BCM432b 802.11 Wireless Controller
Mar 1 11:06:41 localhost kernel[0]: 5.106.198.19
Mar 1 11:06:41 localhost kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Mar 1 11:06:41 localhost kernel[0]: rooting via boot-uuid from /chosen: 2EEFC1E1-687B-3DE5-A5B3-5C489A13EB53
Mar 1 11:06:41 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Mar 1 11:06:41 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@B/AppleMCP79AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/Hitachi HDT721064SLA360 Media/IOGUIDPartitionScheme/Customer@2
Mar 1 11:06:41 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
Mar 1 11:06:41 localhost kernel[0]: Kernel is LP64
Mar 1 11:06:44 localhost kernel[0]: NVEthernet: Ethernet address 00:25:4b:a1:58:e2
Mar 1 11:06:44 localhost kernel[0]: AirPort_Brcm4331: Ethernet address 00:25:4b:8c:0a:c3
Mar 1 11:06:44 localhost kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
Mar 1 11:06:44 localhost kernel[0]: IO80211Interface::efiNVRAMPublished():
Mar 1 11:06:47 localhost kernel[0]: in func createVirtualInterface ifRole = 1
Mar 1 11:06:47 localhost kernel[0]: Created virtif 0xffffff800c2aa600 p2p0
Mar 1 11:06:48 localhost kernel[0]: NVDANV50HAL loaded and registered.
Mar 1 11:06:48 localhost kernel[0]: Previous Shutdown Cause: -128
Mar 1 11:06:48 localhost kernel[0]: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
Mar 1 11:06:48 localhost kernel[0]: DSMOS has arrived
Mar 1 11:06:48 localhost kernel[0]: 00000000 00000020 NVEthernet::setLinkStatus - not Active
Mar 1 11:06:48 ze_monkey-imac kernel[0]: [AGPM Controller] build GPUDict by Vendor10deDevice0655
Mar 1 11:06:48 ze_monkey-imac kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key BEMB (kSMCKeyNotFound)
Mar 1 11:06:48 ze_monkey-imac kernel[0]: AirPort: Link Down on en1. Reason 1 (Unspecified).
Mar 1 11:06:49 ze_monkey-imac kernel[0]: en1: 802.11d country code set to 'US'.
Mar 1 11:06:49 ze_monkey-imac kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
Mar 1 11:06:49 ze_monkey-imac kernel[0]: [ffffff800c29ec00][BNBTrackpadDevice::init][70.12] init is complete
Mar 1 11:06:49 ze_monkey-imac kernel[0]: [ffffff800c29ec00][BNBTrackpadDevice::handleStart][70.12] returning 1
Mar 1 11:06:49 ze_monkey-imac kernel[0]: [ffffff800c277600][AppleMultitouchHIDEventDriver::start] entered
Mar 1 11:06:49 ze_monkey-imac kernel[0]: MacAuthEvent en1 Auth result for: 00:e1:25:87:de:37 MAC AUTH succeeded
Mar 1 11:06:49 ze_monkey-imac kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
Mar 1 11:06:49 ze_monkey-imac kernel[0]: AirPort: Link Up on en1
Mar 1 11:06:49 ze_monkey-imac kernel[0]: en1: BSSID changed to 00:e1:25:87:de:37
Mar 1 11:06:50 ze_monkey-imac kernel[0]: AirPort: RSN handshake complete on en1
Mar 1 11:06:50 ze_monkey-imac kernel[0]: [ffffff800c1e1c00][AppleMultitouchDevice::start] entered
Mar 1 11:06:57 ze_monkey-imac kernel[0]: macx_swapon SUCCESS
Do you know anywhere else I can look for errors to help understand the problem further?
Any suggestions on what to do next? -
Why opening an email message the screen Of iPad disappear and become Black?
I am wondering Why my iPad When trying to open an email message the screen almost immediately become Black Simeone gas and hint? Thank for help
Sounds like something is fouled up. First thing to try is a reboot of your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.
If that doesn't work you might have to see an Apple Genius at an Apple store. -
How to set the Purchase Order screen to display Add and Cancle button
Hi Experts,
Do anybody knows that how can we see the Add / Cancle button on Purchase Order screen ? , at present I need to compulsory scroll vertically to look at Add / Button button.
In Stock Transfer / Inventory transfer screen when we maximise it than also we can see the add / cancle button
will change of font will effect it ?
BR
Samir GandhiHi,
Can you maximize the PO screen too? You should try a smaller font to seem more within a window form.
Thanks,
Gordon -
Screen painter and database connectivity
hi friends where i can found the complete tutorial for the screen painter , coding part and all stuf that is required for designing screen and then using it.
i have searched a lot but stil not getting proper links.[http://abaplovers.blogspot.com/2008/03/sap-abap-module-pool-programming.html]
-
hello all expert,
i have requirement display alv report in screen painter. select options and report display on same screen.
iam taking custom control for display alv report .but when i click on button alv not displayed in custom control.
plz help me anyone /
there is no hurry.
Thanks in advance,
sandeep.
Edited by: Thomas Zloch on Jan 22, 2011 1:00 PM - urgency reducedThanks for reply ,
now i write my code in pbo and pbi event but report not displayed yet.
now this is the code.
*& Report ZTEST_SCREEN1 *
REPORT ZTEST_SCREEN1 .
DATA :
gr_EBELN TYPE RANGE OF EKKO-EBELN,
grs_EBELN LIKE LINE OF gr_EBELN.
DATA:
gs_fieldcatalog TYPE lvc_s_fcat OCCURS 0,
gv_fcat LIKE LINE OF gs_fieldcatalog,
gs_layout TYPE lvc_s_layo.
TYPES :
BEGIN OF gty_item,
mandt LIKE EKKO-mandt,
EBELN LIKE EKKO-EBELN,
lifnr LIKE EKKO-lifnr,
matnr LIKE EKPO-matnr,
desc_text LIKE zEKPO-desc_text,
END OF gty_item,
BEGIN OF gty_EKKO,
mandt LIKE EKKO-mandt,
EBELN LIKE EKKO-EBELN,
lifnr LIKE EKKO-lifnr,
END OF gty_EKKO,
BEGIN OF gty_EKPO,
EBELN LIKE EKPO-EBELN,
matnr LIKE EKPO-matnr,
END OF gty_EKPO.
DATA :
gs_item TYPE gty_item,
gt_item TYPE TABLE OF gty_item.
DATA :
gs_EKKO TYPE gty_EKKO,
gt_EKKO TYPE TABLE OF gty_EKKO,
gs_EKPO TYPE gty_EKPO,
gt_EKPO TYPE TABLE OF gty_EKPO.
DATA :
g_Container TYPE scrfname VALUE 'CC_CONTAINER_GRID',
g_Custom_Container TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
g_Grid TYPE REF TO CL_GUI_ALV_GRID.
DATA :
OK_CODE LIKE sy-ucomm,
SAVE_OK LIKE sy-ucomm.
START-OF-SELECTION.
call screen 100.
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'MAIN'.
SET TITLEBAR 'TITLE'.
IF g_Custom_Container IS INITIAL.
"Create CONTAINER object with reference to container name in the screen
CREATE OBJECT g_Custom_Container EXPORTING CONTAINER_NAME =
g_Container.
" Create GRID object with reference to parent name
CREATE OBJECT g_Grid EXPORTING I_PARENT = g_Custom_Container.
PERFORM u_prepare_fieldcatalog.
gs_layout-ZEBRA = 'X'.
"gs_layout-edit = 'X'. " Makes all Grid editable
" SET_TABLE_FOR_FIRST_DISPLAY
CALL METHOD g_Grid->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
is_layout = gs_layout
CHANGING
it_fieldcatalog = gs_fieldcatalog
IT_OUTTAB = gt_item. " Data
ELSE.
CALL METHOD g_Grid->REFRESH_TABLE_DISPLAY.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
CASE OK_CODE.
WHEN 'EXIT' OR 'BACK' OR 'CNCL'.
LEAVE PROGRAM.
WHEN 'LIST'.
PERFORM u_filter_EKKO.
WHEN OTHERS.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form u_filter_EKKO
text
--> p1 text
<-- p2 text
FORM u_filter_EKKO .
REFRESH gt_EKKO.
Define Range Criteria
grs_EBELN-SIGN = 'I'.
grs_EBELN-OPTION = 'EQ'.
grs_EBELN-low = '6000000004'.
grs_EBELN-high = ekko-ebeln.
APPEND grs_EBELN to gr_EBELN.
CHECK gr_EBELN[] IS NOT INITIAL.
SELECT mandt EBELN kunnr
FROM EKKO INTO TABLE gt_EKKO
WHERE EBELN IN gr_EBELN.
CHECK gt_EKKO[] IS NOT INITIAL.
SELECT EBELN matnr
FROM EKPO INTO TABLE gt_EKPO
FOR ALL ENTRIES IN gt_EKKO
WHERE EBELN EQ gt_EKKO-EBELN.
IF gt_EKKO[] IS NOT INITIAL.
LOOP AT gt_EKPO INTO gs_EKPO.
READ TABLE gt_EKKO INTO gs_EKKO WITH KEY EBELN = gs_EKPO-EBELN.
gs_item-mandt = gs_EKKO-mandt.
gs_item-EBELN = gs_EKKO-EBELN.
APPEND gs_item TO gt_item.
CLEAR gs_item.
CLEAR gs_EKKO.
CLEAR gs_EKPO.
ENDLOOP.
ENDIF.
ENDFORM. " u_filter_EKKO
FORM U_PREPARE_FIELDCATALOG .
CLEAR gv_fcat.
gv_fcat-fieldname = 'MANDT'.
gv_fcat-tabname = 'EKPO'.
gv_fcat-col_pos = 0.
gv_fcat-coltext = 'MANDT'.
gv_fcat-no_out = 'X'. " Do not Display Column
INSERT gv_fcat INTO TABLE gs_fieldcatalog.
CLEAR gv_fcat.
gv_fcat-fieldname = 'EBELN'.
gv_fcat-tabname = 'EKPO'.
gv_fcat-col_pos = 1.
gv_fcat-coltext = 'EBELN'.
INSERT gv_fcat INTO TABLE gs_fieldcatalog.
CLEAR gv_fcat.
gv_fcat-fieldname = 'ERDAT'.
gv_fcat-tabname = 'EKPO'.
gv_fcat-col_pos = 2.
gv_fcat-coltext = 'ERDAT'.
INSERT gv_fcat INTO TABLE gs_fieldcatalog.
CLEAR gv_fcat.
gv_fcat-fieldname = 'KUNNR'.
gv_fcat-tabname = 'EKPO'.
gv_fcat-col_pos = 3.
gv_fcat-coltext = 'KUNNR'.
INSERT gv_fcat INTO TABLE gs_fieldcatalog.
CLEAR gv_fcat.
gv_fcat-fieldname = 'MATNR'.
gv_fcat-tabname = 'EKPO'.
gv_fcat-col_pos = 5.
gv_fcat-coltext = 'MATNR'.
INSERT gv_fcat INTO TABLE gs_fieldcatalog.
ENDFORM. " U_PREPARE_FIELDCATALOG -
Graphical screen painter Not working
Hi:
When I am trying to access Graphical screen Painter in the transaction SE51,an error message is getting displayed with text "No response from graphical screen painter-exiting".
And Alpha numeric editor is getting opened instead of GUI Editor.
Can any One help me out with a solution.
Thanks,
Surya.hi,
Try following links for downloading GUI.
Link: [http://sapdocs.info/sap/uncategorized/sap-gui-downloads/]
Link: [http://www.kodyaz.com/articles/download-sap-gui-for-windows-7.10.aspx]
Link: [http://www.giveawayoftheday.com/sapgui7.2/]
Regards,
Renuka S. -
My HP Deskjet 3050A J611 series wont print, says its printing on the screen, but does nothing.
it has nothing to do with the connection, because even if i try to print a test page from the printer itself (not using my laptop) it still wont print. it says "printing" on the screen, but does nothing. and the green light on the power button blinks the whole time... please please help, its super frustrating, ive un-installed, re-installed, plugged it in, un plugged it, plugged the usb cord in before i realized it wasnt a connection problem, taken the ink out.. i dont know what else to do... again, its not a connection problem.. i tried to go into the settings on the printer itself and clicked printer status or something liek that and it attempted to print out a report, but nothing prints... again, the screen says "printing . . . " but nothing happens and it will continue to say "printing . . . " w/ the moving dots for hours... what could this be?? ive searched online and cant find anything that sounds liek this.. seems like everyone has connection probelms... but i need help!
This sounds like it may be a firmware problem. The first thing to do is check to see if there are any available firmware update. I'll include a link to those instructions below. Next, make sure the printer is plugged directly into a wall outlet. Plugging the printer into a surge protector, power strip, or power backup can cause it to become under powered resulting in strange problems like this one. If the firmware is up to date and plugging the printer directly into a wall outlet doesn't help, follow the steps in the document below. If that doesn't help, you will need to replace the printer. Hope this helps.
Getting the Latest Firmware and Product Updates
The HP Printer Won't Turn On or Respond
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
How to put "selection options without intervals" on screen painter?
Hello all,
I need to put a field for pernr(personal number) on screen painter (module program) and user should be able to enter a list of pernr's to process. I know in report program I can do this by:
SELECT-OPTIONS: s_lpernr FOR pa001-pernr NO INTERVALS.
How can I get this work on sccreen painter in module programming? How can I add a field on screen painter with a range without intervals? Please let me know.
Thanks.
Mithun.You can also do this using the function module COMPLEX_SELECTIONS_DIALOG.
REPORT ZTEST_SCREEN .
DATA : BEGIN OF IT_DYNPFIELDS OCCURS 3.
INCLUDE STRUCTURE DYNPREAD.
DATA : END OF IT_DYNPFIELDS.
DATA: TEST(10) TYPE C.
RANGES: R_UNAME FOR SY-UNAME.
DATA: V_USERNAME LIKE SY-UNAME.
DATA : V_PROG LIKE D020S-PROG VALUE 'ZTEST_SCREEN',
V_DNUM LIKE D020S-DNUM VALUE '0100'.
CALL SCREEN 100.
*& Module STATUS_0100 OUTPUT
* text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'TEST'.
* SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module GET_CURSOR_USERNAME INPUT
* text
MODULE GET_CURSOR_USERNAME INPUT.
REFRESH IT_DYNPFIELDS.
CLEAR IT_DYNPFIELDS.
MOVE 'V_USERNAME' TO IT_DYNPFIELDS-FIELDNAME.
APPEND IT_DYNPFIELDS.
CLEAR IT_DYNPFIELDS.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = V_PROG
DYNUMB = V_DNUM
TRANSLATE_TO_UPPER = 'X'
TABLES
DYNPFIELDS = IT_DYNPFIELDS
EXCEPTIONS
INVALID_ABAPWORKAREA = 1
INVALID_DYNPROFIELD = 2
INVALID_DYNPRONAME = 3
INVALID_DYNPRONUMMER = 4
INVALID_REQUEST = 5
NO_FIELDDESCRIPTION = 6
INVALID_PARAMETER = 7
UNDEFIND_ERROR = 8
DOUBLE_CONVERSION = 9
STEPL_NOT_FOUND = 10
OTHERS = 11.
IF SY-SUBRC EQ 0.
READ TABLE IT_DYNPFIELDS WITH KEY FIELDNAME = 'V_USERNAME'.
IF SY-SUBRC = 0.
V_USERNAME = IT_DYNPFIELDS-FIELDVALUE.
ENDIF.
ENDIF.
PERFORM GET_MULTIPLE.
ENDMODULE. " GET_CURSOR_USERNAME INPUT
*& Form GET_MULTIPLE
* text
* --> p1 text
* <-- p2 text
FORM GET_MULTIPLE .
* Dynamically holding Field name
FIELD-SYMBOLS: <FST> TYPE STANDARD TABLE.
IF R_UNAME[] IS INITIAL.
IF NOT V_USERNAME IS INITIAL.
R_UNAME-SIGN = 'I'.
R_UNAME-OPTION = 'EQ'.
R_UNAME-LOW = V_USERNAME.
APPEND R_UNAME.
CLEAR R_UNAME.
ENDIF.
ENDIF.
ASSIGN R_UNAME[] TO <FST>.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
EXPORTING
TITLE = 'Select Multiple Value'(059)
TEXT = 'Finish Group'(058)
SIGNED = 'X'
LOWER_CASE = ' '
NO_INTERVAL_CHECK = 'X'
JUST_DISPLAY = ' '
JUST_INCL = 'X'
TABLES
RANGE = <FST>
EXCEPTIONS
NO_RANGE_TAB = 1
CANCELLED = 2
INTERNAL_ERROR = 3
OTHERS = 4.
IF SY-SUBRC EQ 0.
READ TABLE R_UNAME INDEX 1.
IF SY-SUBRC = 0.
V_USERNAME = R_UNAME-LOW.
ENDIF.
ENDIF.
ENDFORM. " GET_MULTIPLE -
Hi Dear;
where can i find explanation about the screen painter and specially for the grid, columns and matrix
regards;Hi Satish;
i want a document that explain screen painter in deep and not like SDK.
where can i find these docs?
regards -
Regarding screen painter tutorial
hi,
i am new to screen painter & i want to start working on it as i have been assigned a report.
plzz help me by giving d easiest example of performing it as help will be definately rewarded.Screen Painter
Screen Painter is an ABAP Editor tools allowed us to create dialog screen. Dialog screen usually created as a screen to catch user input. It can be accessed by tcode SE51.
Screen Painter Architecture
You use the Screen Painter to create and maintain all elements of a screen. These are:
Screen Attributes
Describe a screen object in the R/3 System. Screen attributes include the program the screen belongs to and the screen type.
Screen layout
Screen elements are the parts of a screen with which the user interacts. Screen elements include checkboxes and radio buttons.
Elements
Correspond to screen elements. Fields are defined in the ABAP Dictionary or in your program.
Flow logic
Controls the flow of your program.
Two Screen Painter Modes
The Screen Painter has a layout editor that you use to design your screen layout. It works in two modes:
Graphical mode and
Alphanumeric mode.
Both modes offer the same functions but use different interfaces. In graphical mode, you use a drag and drop interface similar to a drawing tool. In alphanumeric mode, you use your keyboard and menus.
Graphical mode is available only on MS Windows 95, MS Windows NT, and Unix/Motif platforms.
To activate the graphical mode, choose Utilities ® Settings in the Screen Painter, then select the Graphical layout editor option.
Creating a Screen: Basics
Create a screen in an existing program and define its attributes.
Design the screen layout and define the attributes of the elements.
Write the flow logic.
Basic Principles
Uses predefined elements with links to the ABAP Dictionary or program.
Supports forwards navigation.
Supports complex elements: Table Control and Tabstrip Control, and Custom Container.
Cut/ Copy/ Paste (Graph. fullscreen)
Undo/ Redo (Graph. fullscreen)
Check this link for STEP-BY-STEP DEMO FOR SCREEN PAINTER with screen shots
http://abapliveinfo.blogspot.com/2007/12/working-with-screen-painter-in-sap.html
Check this link for Screen Painter Concepts http://help.sap.com/saphelp_nw04s/helpdata/en/d1/801c54454211d189710000e8322d00/frameset.htm -
F1 and screen painter not display in IE 7.0
F1 and screen painter not display in IE 7.0
my CRM infomation
basis 610 sp 39
kernel 640_ex2
my notebook
window XP sp2
Internet Explorer 7.0
SAP GUI 640 patch 31
SAP GUI 710 patch 7
I try GUI 640 and GUI 710
but sap help and screen painter not display
I aleady apply vbscript http://support.microsoft.com/default.aspx/kb/556050
how can i solve the problem ?
Edited by: Lee Jun Seok on May 21, 2008 1:41 PM
Edited by: Lee Jun Seok on May 21, 2008 1:41 PMHi,
Yes, even I had lot of problems with IE7 finally i had to instal windows XP all over again with IE6. Please note that even if you downgrade from IE7 to IE6 without installing windows all over again you will still get problem. the best and only solution is to instal windows from scratch and please ensure that the CD that you have instals IE6 and not IE7 because the CD that I had installed IE7 with XP therefore I had to get another windows XP with IE6 and had to create recovery disk before so that I do not have to run around for drivers later.
Hope this helps
Regards,
Deepak
Maybe you are looking for
-
Is The GPU Working In After Effects?
Hello, I use the MSI GTX Geforce 660TI Power Edition, Mercury Playback Engine enabled in Premiere Pro CS6 and After Effects CS6. When I render in Premiere I notice the Geforce GPU is used quite often, but not at a constant rate. It alters from 0% to
-
Unable to clear the data by clear button in Query region in Expenses Home
Hi, I have created two custom regions of query type through JDeveloper, Clear button is not working in one region (especially which is on top of both, no matter region 1 or region 2 ) I didn't write any code there please advise how to fix this one Th
-
XI 30 -- PCK Connectivity ::: Not able to connect.
Hi All, Scenario : I am trying to send information from the XI30 Integration Server to the PCK (which is installed on separate WAS). I have configured a XI Adapter at integration Server (XI30) which is used to connect to PCK system, when i am trying
-
Will ActionScript 3.0 help to study JavaScript
Hello Guys I love interactivity and animation so i choose flash as a platform where i can make animation so today i want to know that will study of actionscript 3.0 helps me to study javascript and jquery. because some developers suggest me that i s
-
thanks in advance regards frnds