MSSQL 2008 - Database size getting smaller after EHP upgrade??

Hi All,
Did anyone observe the DB size of MSSQL 2008 after EHP upgrade?
In my two system, after upgraded to EHP5 and EHP2 respectively, the database is getting smaller compare to before upgrade, estimated 5-10gb.
EHP upgrade is unlike DBEXPORT, it shouldn't have any reorganization features and so do MSSQL.
Any idea?
Cheers,
Nicholas Chang

> Right after upgrade is smaller and after sgen, db size is bigger than source.
So it's ok.
> As system was upgrade from ECC6 to EHP5 with Central Application, HCM and Finance .... the after upgrade size should bigger than the source even before SGEN. Your kind input is mostly welcome.
If the source system was compiled completely (using SGEN) then you need to compare the sizes of the target system also, otherwise you compare apple with pies.
Another reason may be that index compression was activated:
Note 1459005 - Enabling index compression for SQL Server
You could now upgrade to SQL Server 2008 R2 and apply
Note 1488135 - Database compression for SQL Server
this will save additional space (30 - 50 %).
Markus

Similar Messages

  • IW31/32/33 screen size reduced/shrinked after EHP upgrade

    Hi!
    After an ECC6 EHP upgrade our maintenance order screen's size has been reduced, for some unknown reason.
    Is there a way (customizing, setting,etc) to increase it's size back to the old size? At the moment the users have to scroll down to see the technical location or the equipment.
    Changing the screen's resolution or resizing the window help a bit, but not much...
    At the moment it seem like this (I highlighted with yellow the empty places, which was not empty before the upgrade):
    Thank you
    Tamas

    Check this SAP note.
    Note 1775663 - Maintenance order screen sizes
    Note 1017953 - Technical status: incorrect subscreen in operation tab

  • Oracle database not getting Up after patch upgrade

    Hi,
    I have upgraded my oracle database from 10.0.2.1 to 10.0.2.4. after this databse is not coming up. I am able to start/stop listner but while starting SAP it is not able to start databse. Pasting error log below.
    Wed Jun 24 14:56:45 PDT 2009
    LOGFILE FOR STARTING ORACLE
    Trying to start CRD database ...
    Wed Jun 24 14:56:45 PDT 2009
    checking required environment variables
    ORACLE_HOME  is >/oracle/CRD/102_64<
    ORACLE_SID   is >CRD<
    Wed Jun 24 14:56:45 PDT 2009
    check initora
    Wed Jun 24 14:56:45 PDT 2009
    check initora
    Wed Jun 24 14:56:45 PDT 2009
    checking V2 connect
    TNS Ping Utility for Linux: Version 10.2.0.4.0 - Production on 24-JUN-2009 14:56:45
    Copyright (c) 1997,  2007, Oracle.  All rights reserved.
    Used parameter files:
    /usr/sap/CRD/SYS/profile/oracle/sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD) (PROTOCOL = TCP) (HOST = CRM) (PORT = 1527))) (CONNECT_DATA = (SID =
    CRD) (GLOBAL_NAME = CRD.WORLD)))
    OK (0 msec)
    tnsping: V2 connect to CRD
    Wed Jun 24 14:56:45 PDT 2009
    Connect to the database to check the database state:
    R3trans: connect check finished with return code: 12
    Database not available
    Wed Jun 24 14:56:45 PDT 2009
    Shutdown database
    First trying to shutdown the database - May be,
    the database is in the nomount or mount state
    Wed Jun 24 14:56:45 PDT 2009
    starting database
    SQL*Plus: Release 10.2.0.4.0 - Production on Wed Jun 24 14:56:45 2009
    Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.
    Connected to an idle instance.
    ORACLE instance started.
    Total System Global Area 1224736768 bytes
    Fixed Size                  2083560 bytes
    Variable Size             620758296 bytes
    Database Buffers          587202560 bytes
    Redo Buffers               14692352 bytes
    Database mounted.
    ORA-01092: ORACLE instance terminated. Disconnection forced
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
    With the Partitioning, Data Mining and Real Application Testing options
    Wed Jun 24 14:56:53 PDT 2009
    Connect to the database to verify, that the database is now open
    R3trans check finished with return code: 12
    ERROR: Startup of database failed
        Notify Database Administrator.
    /usr/sap/CRD/SYS/exe/run/startdb: Terminating with error code 12
    thanks,
    Bhanu

    Hi,
    I have tried to start and stop oracle from SPLplus but no luck. i am pasting alert log file which is saying some block courruption......
    Starting up ORACLE RDBMS Version: 10.2.0.4.0.
    System parameters with non-default values:
      processes                = 80
      sessions                 = 96
      event                    = 10191 trace name context forever, level 1
      sga_max_size             = 1224736768
      shared_pool_size         = 587202560
      shared_pool_reserved_size= 57982058
      filesystemio_options     = setall
      control_files            = /oracle/CRD/origlogA/cntrl/cntlrCRD.dbf, /oracle/CRD/origlogB/cntrl/cntrlCRD.dbf, /oracle/CRD/sapdata1/cntrl/cntrlCRD.dbf
      control_file_record_keep_time= 30
      db_block_size            = 8192
      db_cache_size            = 587202560
      compatible               = 10.2.0
      log_archive_dest         = /oracle/CRD/oraarch/CRDarch
      log_buffer               = 14246912
      log_checkpoint_interval  = 0
      db_files                 = 254
      log_checkpoints_to_alert = TRUE
      dml_locks                = 4000
      undo_management          = AUTO
      undo_tablespace          = PSAPUNDO
      undo_retention           = 43200
      recyclebin               = off
      remote_os_authent        = TRUE
      remote_login_passwordfile= EXCLUSIVE
      job_queue_processes      = 1
      background_dump_dest     = /oracle/CRD/saptrace/background
      user_dump_dest           = /oracle/CRD/saptrace/usertrace
      core_dump_dest           = /oracle/CRD/saptrace/background
      optimizer_features_enable= 10.2.0.1
      sort_area_size           = 2097152
      sort_area_retained_size  = 0
      db_name                  = CRD
      open_cursors             = 800
      optimpeek_user_binds   = FALSE
      pga_aggregate_target     = 773094113
      workarea_size_policy     = AUTO
      statistics_level         = typical
    PMON started with pid=2, OS id=25204
    PSP0 started with pid=3, OS id=25206
    MMAN started with pid=4, OS id=25208
    DBW0 started with pid=5, OS id=25210
    LGWR started with pid=6, OS id=25212
    CKPT started with pid=7, OS id=25214
    SMON started with pid=8, OS id=25216
    RECO started with pid=9, OS id=25218
    CJQ0 started with pid=10, OS id=25220
    MMON started with pid=11, OS id=25222
    MMNL started with pid=12, OS id=25224
    Wed Jun 24 15:06:19 2009
    ALTER DATABASE   MOUNT
    Wed Jun 24 15:06:24 2009
    Setting recovery target incarnation to 1
    Wed Jun 24 15:06:24 2009
    Successful mount of redo thread 1, with mount id 182910572
    Wed Jun 24 15:06:24 2009
    Database mounted in Exclusive Mode
    Completed: ALTER DATABASE   MOUNT
    Wed Jun 24 15:06:24 2009
    ALTER DATABASE OPEN
    Wed Jun 24 15:06:24 2009
    Beginning crash recovery of 1 threads
    parallel recovery started with 2 processes
    Wed Jun 24 15:06:24 2009
    Started redo scan
    Wed Jun 24 15:06:24 2009
    Completed redo scan
    1 redo blocks read, 0 data blocks need recovery
    Wed Jun 24 15:06:24 2009
    Started redo application at
    Thread 1: logseq 16126, block 2, scn 1104239482
    Wed Jun 24 15:06:24 2009
    Recovery of Online Redo Log: Thread 1 Group 2 Seq 16126 Reading mem 0
      Mem# 0: /oracle/CRD/origlogB/log_g12m1.dbf
      Mem# 1: /oracle/CRD/mirrlogB/log_g12m2.dbf
    Wed Jun 24 15:06:24 2009
    Completed redo application
    Wed Jun 24 15:06:24 2009
    Completed crash recovery at
    Thread 1: logseq 16126, block 3, scn 1104259484
    0 data blocks read, 0 data blocks written, 1 redo blocks read
    Wed Jun 24 15:06:25 2009
    LGWR: STARTING ARCH PROCESSES
    ARC0 started with pid=16, OS id=25232
    Wed Jun 24 15:06:25 2009
    ARC0: Archival started
    ARC1: Archival started
    LGWR: STARTING ARCH PROCESSES COMPLETE
    ARC1 started with pid=17, OS id=25234
    Wed Jun 24 15:06:25 2009
    Thread 1 advanced to log sequence 16127 (thread open)
    Thread 1 opened at log sequence 16127
      Current log# 3 seq# 16127 mem# 0: /oracle/CRD/origlogA/log_g13m1.dbf
      Current log# 3 seq# 16127 mem# 1: /oracle/CRD/mirrlogA/log_g13m2.dbf
    Successful open of redo thread 1
    Wed Jun 24 15:06:25 2009
    MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
    Wed Jun 24 15:06:25 2009
    ARC0: Becoming the 'no FAL' ARCH
    ARC0: Becoming the 'no SRL' ARCH
    Wed Jun 24 15:06:25 2009
    ARC1: Becoming the heartbeat ARCH
    Wed Jun 24 15:06:25 2009
    SMON: enabling cache recovery
    Wed Jun 24 15:06:25 2009
    Errors in file /oracle/CRD/saptrace/usertrace/crd_ora_25226.trc:
    ORA-00704: bootstrap process failure
    ORA-39700: database must be opened with UPGRADE option
    Wed Jun 24 15:06:25 2009
    Error 704 happened during db open, shutting down database
    USER: terminating instance due to error 704
    Instance terminated by USER, pid = 25226
    ORA-1092 signalled during: ALTER DATABASE OPEN...
    Thanks,
    Bhanu

  • Database history growth not updating after EHP upgrade

    Hi All,
    We are using SAP ECC 6.0 (731 - SP09 )  & DB2 Fix pack 5 version.Database history growth not updating after EHP upgrade. I have check  collector job running fin and DB tab > Configuration > Data Collection Framework > Configuration Collector are in green status.
    Please help me to resolve this issue.
    Regards,
    MK

    Hi MK,
    You can try few things:
    1. Check to collector standard job like SAP_COLLECTOR_FOR_PERFMONITOR should be running succesfully.
    2.If you can check to data collector collection interval column , you will find it to be Not Schedule.
    Try with Repair all collector.
    To make it work properly you have to perform
    Data Collection Full
    Data Collection Incremental
    Hope it helps
    BR Vaibhav

  • ARIS 7.1 with MSSQL 2008 Database?

    Hello Experts,
    Is it possible to install ARIS 7.1 with MSSQL 2008 Database?
    In the standard installation guide they have mentioned only about 2005 server. If I see some online communities of Aris (
    http://www.ariscommunity.com/users/rahulrajvanshi31/2010-01-28-does-aris-support-windows-server-2008 ) they mention it is possible. But no details are provided in these posts.
    Are there anyone here who have tried ARIS 7.1 with MSSQL 2008 Database?
    Regards
    Vivek

    Hi Vivek,
    As far as I know for ARIS 7.1, MS SQL 2008 is supported but only up to version R2 Enterprise Edition. MS SQL 2008 R3 is currently not supported.
    I hope this helps.
    Roland

  • Does preview catalog will get smaller after deleting movies/pictures from Lightroom 4.0 assuming ...

    Does preview catalog will get smaller after deleting movies/pictures from Lightroom 4.0 assuming the option 'Automatically discard 1:1 previews' is marked 'Never'?

    Yes, but it may not be apparent immediately. The previews are "held" for a time to save rebuilding if the associted file is reimported or the removal undone.

  • Macbook pro storage do not get smaller after cleaning up photos in new photos app

    Macbook pro storage do not get smaller after cleaning up photos in new photos app.
    How can I delete photos? are they hidden somwhere?

    Yes, trash is empty. And in photos libary I only have 1800 items. Also I havent got so much movies.

  • "disp+work" process in not getting started after kernel upgradation

    Hello Experts,
    Good day…..,
    I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
    I have upgraded kernel version from 701 to 741, but the “disp+work” process is not getting started after kernel upgrade.
    I have posted “dev_W0” log &
    “disp+work” command result obtained in CMD prompt of respective server.
    Please help me out in this. Thanks all in advance.
    “dev_w0” Log”
    trc file: "dev_w0", trc level: 1, release: "741"
    *  ACTIVE TRACE LEVEL           1
    *  ACTIVE TRACE COMPONENTS      all, MJ
    M sysno      55
    M sid        TNG
    M systemid   562 (PC with Windows NT)
    M relno      7410
    M patchlevel 0
    M patchno    42
    M intno      20020600
    M make multithreaded, Unicode, 64 bit, optimized
    M profile D:\usr\sap\TNG\SYS\profile\TNG_DVEBMGS55_ABTHMSSB01
    M pid        2392
    M
    M 
    M Wed Jul 23 02:04:35 2014
    M  kernel runs with dp version 208000(ext=117000) (@(#) DPLIB-INT-VERSION-208000-UC)
    M  length of sys_adm_ext is 500 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 2392) [dpInit.c 731]
    M  DpCommonParamInit: rdisp/core_file_size = default --> no change
    I  MtxInit: 30000 0 0
    M 
    M Wed Jul 23 02:04:36 2014
    M  DpIPCInit2: read dp-profile-values from sys_adm_ext
    M  DpShMCreate: alloate/attach shared memory (mode=ATTACH)
    M  DpShMCreate: sizeof(wp_adm)                         24288    (1104)
    M  DpShMCreate: sizeof(tm_adm)                          51472080             (256080)
    M  DpShMCreate: sizeof(ca_adm)                           432000  (72)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/16/7464064/7583152
    M  DpShMCreate: sizeof(comm_adm)                   7583152                (14904)
    M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    M  DpShMCreate: sizeof(slock_adm)                      0              (296)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)                         0              (80)
    M  DpSockTableSize: max/headSize/ftSize/tableSize=500/16/520064/520080
    M  DpShMCreate: sizeof(sock_adm)                       520080  (1016)
    M  DpShMCreate: sizeof(vmc_adm)                       0              (3208)
    M  DpShMCreate: sizeof(wall_adm)                        (ft=41664/fi=67472/hd=64/rec=192)
    M  DpShMCreate: sizeof(amc_rec_adm)                              (ft=86464/fi=67472/hd=64/rec=416)
    M  DpShMCreate: sizeof(websocket_adm)                         (ft=28864/hd=64/rec=272)
    M  DpShMCreate: sizeof(gw_adm)          64
    M  DpShMCreate: sizeof(j2ee_adm)       3936
    M  DpShMCreate: SHM_DP_ADM_KEY                  (addr: 00000000103D0050, size: 60433936
    M  DpShMCreate: allocated sys_adm at 00000000103D0250
    M  DpShMCreate: allocated wp_adm_list at 00000000103E20F0
    M  DpShMCreate: allocated wp_adm at 00000000103E2410
    M  DpShMCreate: allocated tm_adm_list at 00000000103E84F0
    M  DpShMCreate: allocated tm_adm at 00000000103E8730
    M  DpShMCreate: allocated ca_adm at 00000000134FF000
    M  DpShMCreate: allocated comm_adm at 0000000013568980
    M  DpShMCreate: system runs without slock table
    M  DpShMCreate: allocated sock_adm at  0000000013CA4130
    M  DpShMCreate: allocated vmc_adm_list at 0000000013D232C0
    M  DpShMCreate: system runs without VMC
    M  DpShMCreate: allocated gw_adm at 0000000013D23560
    M  DpShMCreate: allocated j2ee_adm at 0000000013D237A0
    M  DpShMCreate: allocated ca_info at 0000000013D24900
    M  DpShMCreate: allocated wall_adm (ft) at 0000000013D24B40
    M  DpShMCreate: allocated wall_adm (fi) at 0000000013D2F000
    M  DpShMCreate: allocated wall_adm (head) at 0000000013D3F990
    M  DpShMCreate: allocated amc_rec_adm (ft) at 0000000013D3FBD0
    M  DpShMCreate: allocated amc_rec_adm (fi) at 0000000013D54F90
    M  DpShMCreate: allocated amc_rec_adm (head) at 0000000013D65920
    M  DpShMCreate: allocated websocket_adm (ft) at 0000000013D65B60
    M  DpShMCreate: allocated websocket_adm (head) at 0000000013D6CE20
    M  DpShMCreate: initialized 21 eyes
    M  DpCommAttachTable: attached comm table (header=0000000013568980/ft=0000000013568990/fi=0000000013C86E10)
    M  DpSockAttachTable: attached sock table (header=0000000013CA4130/ft=0000000013CA4140)
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  <ES> EsILock: use Semphore 33 for locking
    X  Using implementation view
    X  <EsNT> Using memory model view.
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    X 
    X Wed Jul 23 02:04:37 2014
    X  mm.dump: set maximum dump mem to 96 MB
    M  ThStart: taskhandler started
    M  ThInit: initializing DIA work process W0
    M 
    M Wed Jul 23 02:04:44 2014
    M  ThInit: running on host ABTHMSSB01
    I  MtxInit: 0 0 0
    M 
    M Wed Jul 23 02:04:45 2014
    M  calling db_connect ...
    B  Loading DB library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' ...
    B  Library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' loaded
    B  Version of 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' is "741.10", patchlevel (0.42)
    C  Prepending D:\usr\sap\TNG\DVEBMGS55\exe to Path.
    C  Register application info.
    C 
    C Wed Jul 23 02:04:47 2014
    C  Oracle client version: 10.2.0.4.0, (dbsl 741 040714, UNICODE[2])
    C  Detailed Oracle client (patch) info not available.
    C  *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
    [dbsloci.c    2406]
    C     Only Secure Connect method possible.
    M  ***LOG R19=> ThDbConnect, db_connect ( DB-Connect 000256) [thDatabase.c 76]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step TH_INIT, thRc ERROR-DB-CONNECT_ERROR, action STOP_WP, level 1) [thxxhead.c   2281]
    M Wed Jul 23 02:04:48 2014
    M 
    M  Info for wp 0
    M 
    M    pid = 2392
    M    severity = 0
    M    status = 0
    M    stat = WP_NEW
    M    waiting_for = NO_WAITING
    M    workerType = DP_WORKER_DIAWP
    M    act_cs_count = 0
    M    csTrack = 0
    M    csTrackRwExcl = 0
    M    csTrackRwShrd = 0
    M mode_cleaned_counter = 0
    M    control_flag = 0
    M    report = > <
    M    action = 0
    M    tab_name = >                              <
    M 
    M  ThIErrHandle: no current incoming request
    M 
    M 
    M *****************************************************************************
    M  *
    M  *  LOCATION SAP-Server ABTHMSSB01_TNG_55 on host ABTHMSSB01 (wp 0)
    M  *  ERROR ThInit: db_connect
    M  *
    M  *  TIME Wed Jul 23 02:04:48 2014
    M  *  RELEASE 741
    M  *  COMPONENT Taskhandler
    M  *  VERSION 1
    M  *  RC 16797709
    M  *  MODULE D:/depot/bas/741_REL/src/krn/si/th/thxxhead.c
    M  *  LINE 2470
    M  *  COUNTER 1
    M  *
    M  *****************************************************************************
    M 
    M  PfRejectStatistic: clear statistic record
    M  PfClearAllRec: clear statistic area
    M  PfClearAllRec: statRecordAction = STAT_RECORD_ACTION_REJECT
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hooks for event BEFORE_DUMP
    M  ThIErrHandle: entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workp. 0 2392) [dpnttool.c 335]
    “Desp+Work” Command result:
    C:\Users\tngadm>disp+work
    disp+work information
    kernel release 741
    kernel make variant 741_REL
    compiled on NT 6.0 6002 x86 MS VC++ 16.00 for NTAMD64
    compiled for                  64 BIT
    compilation mode UNICODE
    compile time Jul  9 2014 16:39:46
    update level 0
    patch number 42
    source id 0.042
    RKS compatibility level 0
    supported environment
    database (SAP, table SVERS) 700
    710
    701
    702
    703
                                  711
    720
    730
    731
    732
    738
    740
    operating system
    Windows NT 5.1
    Windows NT 5.2
    Windows NT 6.0
    Windows NT 6.1
    Windows NT 6.2
    Windows NT 6.3
    C:\Users\tng

    C  *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
    [dbsloci.c    2406]
    C     Only Secure Connect method possible.
    For this issue you need to set up SSFS.
    1639578 - SSFS as password storage for primary database connect
    I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
    I have upgraded kernel version from 701 to 741
    Are you sure kernel 741 is compatible with an EHP 4 system ?
    Read this SAP note
    1969546 - Release Roadmap Kernel 740
    Regards
    RB

  • Ipod Touch not getting detected after IOS upgrade.

    I have recently upgraded the firmware of my Ipod Touch (1G) to IOS 3.0.1 and was successful in upgrading.
    The issue i am facing is that my ipod touch is not getting detected after reconnecting and the ipod touch is not getting switched on...it is just showing the apple symbol and the progress bar.
    Please let me know if anyone has faced similar type of issue.
    Please also let me know the resolution for this.

    Are you using a USB hub? Try connecting the iphone directly to the computer's USB port and see if that makes a difference.
    Also, with the upgrade, this seems to happen a lot. Most of the time if it is not the USB issue above, it can be resolved by simply redownloading Itunes and installing it on top of your current installation.

  • Accessing the ETL Getting Started after ODI Upgrade - SOLVED

    Connected to the topology manager as SUPERVISOR and upgraded the work repository.
    Thanks
    Fabio D'Alfonso
    Hi,
    I was going back to take a look at the Getting started with ETL.
    After the upgrade to 10.1.3.5.3 (and also 10.1.3.6.0) I cannot access the sample environment.
    I upgraded the sample repository but the message still states that the repository is outdated.
    Should I setup a full new environment to get back the ability to look at the getting started?
    Thanks
    Fabio D'Alfonso
    Edited by: Fabio D'Alfonso on Jun 9, 2010 2:33 PM

    Connected to the topology manager as SUPERVISOR and upgraded the work repository.
    Thanks
    Fabio D'Alfonso
    Hi,
    I was going back to take a look at the Getting started with ETL.
    After the upgrade to 10.1.3.5.3 (and also 10.1.3.6.0) I cannot access the sample environment.
    I upgraded the sample repository but the message still states that the repository is outdated.
    Should I setup a full new environment to get back the ability to look at the getting started?
    Thanks
    Fabio D'Alfonso
    Edited by: Fabio D'Alfonso on Jun 9, 2010 2:33 PM

  • DVDs for 7.01 after EHP upgrade

    Hi Every one,
    We have upgraded our systems from NW 7.00 to NW7.01 by EHP upgrades in all releases (Ecc,XI,SM,EP) individually. and we have been using SR3 dvds installation dvds(sapinst,uc,oclient,java etc etc) for system copies and other installation stuff. but as we have moved to NW 701 will we get any newer version DVDs for the same release.I have been searching in market place but their is no such NW 7.01 .So is this means do we still need to use same old dvds which we used for NW 7.00.
    Please confirm me.
    Thank yu.

    Hi,
    Please check below link which contains DVD for installation Master 7.01.
    https://websmp206.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=DISPHIER&HEADER=N&FUNCTIONBAR=N&EVENT=TREE&TMPL=INTRO_SWDC_IU_N&V=INST
    Thanks
    Sunny

  • I'm getting errors after I upgraded to Mavericks

    After I upgraded my Mac Pro to Mavericks, I've been having problems exporting files out of Final Cut Pro to any use.
    The error message displays the following:
    The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)
    Has anyone seen similar error and found a way to fix it?

    10.0.1 //
    Model Name:          Mac Pro
      Model Identifier:          MacPro5,1
      Processor Name:          Quad-Core Intel Xeon
      Processor Speed:          2.4 GHz
      Number of Processors:          2
      Total Number of Cores:          8
      L2 Cache (per Core):          256 KB
      L3 Cache (per Processor):          12 MB
      Memory:          20 GB

  • Why my iphone get lock after i upgrade to ios5

    why my iphone has been locked after i upgrade to ios 5??? i don't understand that specially i didnt buy it under contract with AT&T i buy it in cash from USA

    Doesn't matter if you bought is without a contract.  This does NOT mean it was unlocked.  Clearly, you bought a phone that was hacked to work with another carrier besides AT&T.  Now that you've upgraded, your phone is relocked to AT&T as it should be.
    AT&T does NOT unlock their phones.  Ever.

  • Need help in migrating MSSQL 2008 database to Oracle 11g

    Hi everyone,
    So, as stated above I want to migrate our apps database from mssql to oracle as it is what the client wants..
    I have absolutely no experience working with Oracle.
    My computer is running windows 7 32 bit, our DB people installed a 9i client for me to connect to the server and the my SQL Developer just came straight from the site. (So it's the latest release)
    I have one "DBA" access to the database I'm trying to migrate to.
    I've downloaded the Oracle SQL Developer and have been attempting to "migrate" our database using the migration tool for 3 days now, but to no avail.
    So the error I'm encountering is that the migration just stops, and a popup with the message "Migration actions have failed. Check the migration reports for details. : The connection is closed." comes up.
    I have no idea where the migration report can be found. As I cannot find it in the reports tab available.
    I'm hoping someone here can have the patience and knowledge to get me through this?

    The migration report is generally created under the "Documents and Settings" folder under application data/sqldeveloper. Key thing is at what stage the failure occurs?. Does it happen immediately after you start the data migration or after a while?.
    If the data migration process fails immediately after the start then there might be an issue with permissions on the source/target databases. Probably it is having trouble with disabling constraints on the target database. Because rememeber SQL Developer will disable constraints before it moves data across. My preference is to give DBA privilege to the Oracle user to avoid just cases or you can disable the constraints yourself by using scripts. Check the source/target database date/time format masks. You can set them up in SQL Developer.
    If the data migration process fails after a while and you notice that data for some tables is migrated then you may be running into network timeouts or space issues on Oracle etc.
    HTH
    Regards
    Prakash

  • Database connection getting reset after application server is idle

    Hi,
    I have a centralized database with 7 to 8 tablespaces for different applications, for one of the linux based application i am having the captioned issue. The system works fine but whenever its left idle for more than 45 minutes the following scenario occurs.
    1.     04 Transactions performed all the transactions are parked in the queue of process1.
    2.     Process 1 reads the first transaction and in order to pass it to the next process queue (process2) refers to the database table to check that the process is registered and running and gets its process id to pass the message to its queue. At this level while trying to get the next process details the database call takes somewhere around 15 minutes and return the below error.
    DBError::dumpError error code: [3135], error Msg: [ORA-03135: connection lost contact
    ]11/04/24 12:55:45:352 |INFO| DBCommand::ExecuteSP--DR SP [PKGCONFIGURATION.spIsModuleRegistered] Exception [3135] ORA-03135: connection lost contact
    11/04/24 12:55:45:405 |ERR | Registrar::isRegistered mod id [21987475]: registration check failed
    the above scenario occurs first time when every process receives any message from other and tries to fetch any details from the database. Once all the process have got these errors and are through with the database the next messages gets entertained in a proper manner.
    Can anybody help in this regard. Secondly i do have the trace level logs if needed can be shared for reference and below is the error i get in SQLNET.ORA
    Fatal NI connect error 12170.
    VERSION INFORMATION:
         TNS for Linux: Version 10.2.0.1.0 - Production
         TCP/IP NT Protocol Adapter for Linux: Version 10.2.0.1.0 - Production
    Time: 27-APR-2011 16:07:52
    Tracing not turned on.
    Tns error struct:
    ns main err code: 12535
    TNS-12535: TNS:operation timed out
    ns secondary err code: 12560
    nt main err code: 505
    TNS-00505: Operation timed out
    nt secondary err code: 110
    nt OS err code: 0
    Thanks in anticipation.
    Regards
    Hassan

    Not an Oracle issue. Network. Your network connection has been configured to time out after 45 minutes and for a reason.
    Do either one of the following things, in order of preference
    1 Take the 'application', find a garbage bin, and put it in the garbage bin, where it belongs.
    Oracle has Streams available for Queuing applications, and this heavily sounds like a hobby implementation of Streams.
    2 Have your network administratror up the timeout to indefinite.
    You may want to implement 2) before you implement 1)
    Sybrand Bakker
    Senior Oracle DBA

Maybe you are looking for

  • Creation of purchase requisition from Webdynpro Java

    Hi all,     I have a requirement that i should create purchase requisition from webdynpro java. i imported all required BAPI in the webdynpro. But i am not getting what should i have to give as input paramater. I have imported the Bapi_Requition_Crea

  • Adobe assistant says (error 100) please help what fixes this problem?!?

    Hi I've tried to download the trials for a few programs to see if I'd like to upgrade to CS5.  Everytime I restart the download assistant it asks me to sign in and when i put in my user name/password it says theres a problem connecting to the adobe.c

  • Error in Dynamic Regions load

    Hi! I'm new in ADF. My problem is: I use a Tree like a menu. When we click on tree node, on the right of the page will display form with some Data Control ( I use Dynamic Regions to contain form with Parameter input text and table). 1. When I click o

  • Request for feedback:  implementing Swing-based drawers

    Good day. I've inherited some code to which I need to add a 'dresser drawer' like functionality. Click on a logical 'open' button and the drawer opens, revealing, or displaying as the case may be, a JPanel with more stuff in it. Click on a logical 'c

  • Apllication server startup proiblem

    Dear guys, I am getting this error repeatedly, Frm -92101 server start up proble.. what could be the reason for this and how to solve it.. Regards, S.arulmani