Multemedia controller drivers

I've a s3321p Mini and keep getting message to add multimedia driver. All attempts to locate driver fail. Device manager shows 24 instances of Multimedia Controller, none with any ID. Just installed Vista SP2 and it keeps "finding" new device and asks for driver. Does it 24 times. Any ideas?

Plague,
Are you running XP Service Pack or 2? There were some problems with SFMAN32.DLL that were corrected with SP2. Also you may want to clean boot into the system when installing the driver update. This is described at the end of the FAQ at the top of this board.
Jeremy

Similar Messages

HP Pavillion g7 Notebook needing Windows 7 64 Bit USB Controller Drivers

Hi,
I have a HP Pavillion g7 Notebook which originally came with Windows 8. I have downgraded to Windows 7 64 bit but I can not find the universal serila bus controller drivers for this version of Window.
I have a Intel(R) 7 Series/C216 Chipset Family USB Enhanced Host Controller -
1E2D PCI\VEN_8086&DEV_1E2D&SUBSYS_1845103C&REV_04\3&11583659&0&D0.
Intel(R) 7 Series/C216 Chipset Family USB Enhanced Host Controller - 1E2D PCI\VEN_8086&DEV_1E2D&SUBSYS_1845103C&REV_04\3&11583659&0&D0
HP Pavilion g7-2240us Notebook PC
Serial Number: [Personal Information Removed]
Product Number: C2M31UA
I Hope sumbody can help. I would hate to go back to Windows 8
Bob

Hi:
Use the W7 x64 drivers and software from the g6t-2000...the USB3 driver is under the chipset driver section.
DO NOT USE ANY BIOS OR FIRMWARE FILES FROM THIS MODEL
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5278...

SATA controller drivers

i have a t60 that i need to reinstall windows on. this is not possible without the controller drivers.
after tech support graciously hung up on me when they told me they didnt know what they were and didnt have them, i am left with no idea of where to obtain such drivers.

Sounds like you need the Intel Matrix Storage Manager drivers:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-62909
For future reference, you can always go to the main support page at www.lenovo.com/support
then enter in your Machine Type Model (MTM) number. Then click on Drivers and Downloads.
OR
Go to the main support page, click on "Driver matrices (most common files)" , then click on ThinkPad, then click on your particular type.

Ralink Bluetooth Controller Drivers Causes Blue Screen Of Death

Good morning, I have a HP Envy 17-J010el notebook, born with Windows 8 and now I have updated it to Windows 8.1 Professional.
After the update, I noticed that the bluetooth controller drivers couldn't be installed:
Bluetooth Controller: PCI\VEN_1814&DEV_3298&SUBSYS_18EC103C&REV_00\4&2051f34d&0&01E0
HP Support Assistant and Windows Update are unable to find them. I downloaded them from HP Envy-17J010el drivers page (http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-125314-1&cc=it&dlc=it&lc=it... and tried to install them but I got the blue screen of death and I had to format my pc. These drivers are only for Windows 8 and evidently don't work on 8.1.
I searched the web for a solution but I discovered the everybody are in my same position, and anybody can't find a way to solve the problem.
At the moment I don't know what to do, I need the bluetooth but I can't use it or simply activate it.
Are updated drivers going to be released for Windows 8.1 soon?
I apologize for my english.

Do you read English?!
No one tell you to format your pc!!
Just go to program and features - Uninstall Update.
Find KB2887595 Uninstall it, restart your pc.
after this install agein the Ralink Bluetooth drvier via hp recovery manager.

USB controller drivers ??

Where are the latest drivers for USB controller on the MSI website ? I looked and all i see is the via 4in1 hyperion .I dont want those cause i already have those Plus updating those drivers may cause problems for my radeon 9800 pro . I was able to use the MSI mobo cd utilities cd to get those usb controller drivers but im sure there are updated ones . I just cant seem to find them listed .

Quote
Originally posted by cujo
restricting kids rights with limited access accounts in xp no good?
hehe. thankfully no kids for me yet.
Yes i have user accounts setup for them but .They will find a way to get on it and ill find a way to not lock myself out when i leave my desk for 5 minutes :D :D
Then i come back :O :O :O ;( ;(
8) :D

Refreshed pc and lost all network controller drivers

Upgraded to Windows 8. Made file history backup then clicked Refresh My PC & it uninstalled ALL of my Network Controller Drivers, so no more Network connections or settings of any kind. The only Recovery DVDs are for W 7. Do I have to reinstall 7 & then 8? With my 3 System Recovery DVDs, I also got an Application and Driver Recovery DVD. Can I Use that one to recover just the drivers I need without reinstalling the whole W 7 system from the other DVDs? Much Thanks in advance!

Hi:
I will need the HID"s for the unknown devices.
Install this driver first and reboot.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-110503-1&cc=us&dlc=en&lc=en...=
The rest of the drivers you need are:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-110126-1&cc=us&dlc=en&lc=en...=
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-111691-1&cc=us&dlc=en&lc=en...=
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-110512-1&cc=us&dlc=en&lc=en...=
One of the unknown devices is probably this...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-116584-1&cc=us&dlc=en&lc=en...=

Wireless network controller drivers

where can I find hp 14 HP 14-d037tu wireless network controller drivers. it's running windows 7 ultimate 64 bit
This question was solved.
View Solution.

Hi:
Based on the hardware ID's you posted, these are the drivers you need...
Wireless:
http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_131223_1
Bluetooth:
http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_130390_1

HT3983 Network Controller Drivers & Bluetooth Peripherals Driver Required

Network Controller Drivers & Bluetooth Peripherals Driver Required

In Bootcamp Asistant there is an option to download the support drivers. Plug in your USN and tick just that option and let it download them. It will take a while as it's downloading more than 700MB

Ethernet controller/network controller drivers needed for Satellite C660

Hi
Yesterday i installed Win7 64bit in my Toshiba Satellite C660-26Z and ethernet controller, network controller and PCI simple communications controller drivers are missing.
I don't have recovery disc
So if anybody knows where to get it and how to install it...then plz help me....:)
Thanks

Hi
All drivers you can find on Toshiba download page - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
There you can find Realtek LAN driver version 7.023.0
If you need WLAN driver, you can download from Toshiba WLAN portal - http://aps2.toshiba-tro.de/wlan/
Your notebook has Realtek RTL8188CE WLAN card inside.
If you need more help let us know.

Sata Controller Drivers - Help!

I've had to replace the hard drive and have a brand new 120GB Seagate SATA 7200RPM 8MB Cache, however i do not have any of the original floppy discs or driver discs for the motherboard.
I've been to both the Intel & MSI site and neither of which have any SATA COntroller drivers, i need them as i want to load Win XP Pro SP2 onto the SATA and its my only drive!!
Please someone help!

You don't need any SATA drivers for WinXP and that board. The board just makes Windows see 2 more IDE channels. But you have to configure it properly in the BIOS.
Use Native Mode to enable both IDE channels and both SATA channels.
BIOS>>Integrated Peripherals>>On-Chip IDE Config.
Set like below (taken from Maesus FAQ)
Quote
For Native Mode:
ATA Configuration: SATA Only or PATA only, depending on which you want to be the FIRST BOOT device! (In your case use SATA Only)
S-ATA Keep Enabled: Yes if you chose PATA only
P-ATA Keep Enabled: Yes if you chose SATA Only
PATA Channel Selection: Both
Combined Mode Operation: PATA First/SATA First, depending on which you want to act as 1st Channel.
S-ATA Ports Definition: - P0-1st/P1-2nd or P0-3rd/P1-4th, depending on which you want to act as Master. (Use the P0-1st/P1-2nd for your case)
Q: What is S-ATA Ports Definition?
There are two options: P0-1st/P1-2nd and P0-3rd/P1-4th. If you choose P0-1st/P1-2nd, your Port-0 S-ATA (SER-1) will become the 1st IDE Master, ie IDE-1 Master. and Port-1 S-ATA (SER-2) will become 2nd IDE Master. If you plan to boot with SATA HDD, it's recommended to set to P0-1st/P1-2nd. If you plan to boot with PATA HDD, it's recommended to set to P0-3rd/P1-4th.
Then save the Bios and re-boot back into BIOS.
Go to BIOS>>Advanced features>>Boot Device Select and make sure the new SATA drive is in the list and where you want it (most people put after the floppy & CD/DVD drives).
If the above doesn't work, try the same settings above with ATA Configuration set to "PATA Only".
Don't worry if some settings above are greyed out. Changing any options causes others to be unavailable in some cases. Again remember to check the "Boot Device Select" menu after changing the IDE Config menu.
Make sure you read the FAQ from the link I posted above. Lots of good info you needed there; specifically the section on HDD's.

K8N Neo USB Controller Drivers

System is
AMD Athlon 64 3400+
1GB Ram
MS-7030 K8N Neo Mobo
ATI Radeon 9800 Pro
Creative Audigy 2 ZS
Western Digital 160GB Serial ATA
Athena Power ATX-450W PSU
Well, I recently did a fresh install of XP Pro, which went smoothly. I was OCing and went a little to far and my system wouldnt boot. After a bunch more problems and flashing my BIOS, I got everything working again. Now the only problem that I have left is my USB controller drivers won't install.
I had all my drivers backed up using Driver Genius and I currently have 18 drivers loaded. When I go to restore it has my High Speed USB Bridge, USB mouse, and keyboard (the 3 drivers Im currently missing) backed up but when I restore they don't do anything.
I installed Nvidia's 5.10 system drivers which I thought had the USB drivers on them and USB is enabled in BIOS, so, I dont know what to do.
Oh and in Device Manager, under USB controllers it has PCI to USB Host Controller, 2 standard OpenHCD USB Host Controllers, and 3 USB Root Hubs; but none of my 5 USB ports will work so whats the deal. Thanks in advance, Stealth

An sp2 bug workaround is to right click the "Standard Enhanced Usb Controller" (usb 2.0) and choose update driver and let it be done automaticly.
xp will then make a new copy of the neccesary files (if needed) from driver cache and dll cache .
Do the same for the two "openHCD controller" 's (usb 1.1) also if needed.

I Need USB Controller Drivers For My HP Pavillion g6 2235ca Notebook Running Windows 7 Pro 64bit?

So it has been at least a couple of months that I've been using my laptop with only ONE working USB port.
The other two do NOT work. If I go to Computer on the Start menu, and right-click on Computer, then Manage, then i go to Device Manager, there is a yellow exclamation mark next to Universal Serial Bus (USB) Controller.
When I try to update them, Windows 7 tells me that an update could not be found blah blah blah...
This problem happened ever since I installed Windows 7 64bit over Windows 8 64bit.
So, can someone help me find drivers for this USB Controller? Or is this some kind of hardware failure or issue?
Please help? Anyone...!
Thank you!
This question was solved.
View Solution.

Hi,
Try installing the USB 3.0 driver on the following link.
http://ftp.hp.com/pub/softpaq/sp55501-56000/sp55975.exe
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Windows 7 and HDD controller drivers

I need a compatiable HDD controler driver for windows 7 for a Slimline s3500F. When I try to run a clean install on those desktops, windows 7 can not find a HDD to install on. This is not an upgrade. The drives have been formated in the windows 7 cmd term so nothing is on the disks. I just need a HDD controller driver.
I have already tried expanding the nForce 430/6150se chipset driver from nVidia's site (32bit Vista/win7 ed.), but none of the sata drivers in the archive are compatible with my hardware according to the Win7 install app. If the Slimline s3500f does not use the nForce 430/6150se chipset, what does it use? Getting any information for this computer seems to be difficult. On a personal note from myself and the company I work for, If we can't get any concrete answers to these questions I will be forced to upgrade our office PCs because the Slimline s3500F pc doesn't currently have an OS on them which is clearly unaccaptable. If I am forced to upgrade, my company will never by HP again, this lack of clear documentation is appalling.
Extra information if it's helpful.
A recent office move has resulted in the loss of our s3500F restore CDs. Since we never purchased a copy of vista, and because XP seems to be impossible to install on them (errors after the xp pro Install coppied files to the HD & restarted), and because both IT and admin refuse to buy a real copy of vista, our only option right now is to get win7 on these PCs A.S.A.P. We are using the 7227 Ultimate RC until Win7 goes for sale at retail. However, as I've already said if we can't get our s3500F PCs online we will be upgrading our office equipment, (most likely canidate is Dell due to superior documentation). I don't care about GFX, sound, or even card reader drivers. I just need the Disk controler so we can get a base OS on them. As long as they are operational we can wait for extra drivers.

cnfrisch wrote:
Assuming you have a genuine "Full License" version of Windows 7, open the motherboard BIOS and change the DVD drive to the first bootable drive and the Hard Drive as the second bootable drive. Insert the Windows DVD in the DVD drive, save your new BIOS settings and upon restart you should be able to boot with the Windows 7 DVD. When the setup menu appears, select the option to delete any existing partitions, then create a new partition and proceed to install Windows 7.
I appreciate the reply but did you even read my post? The problem isn't that I can't boot the windows 7 install DVD, the problem is that I can't get the Windows 7 installer to see my hard drive.
For clarification puposes:
I can boot off the windows 7 DVD
The DVD rom in all of the s3500F systems is the primary boot device.
There are no partitions to delete in the Win 7 setup screen because it can't detect any supported hardware to install on.
This is a Driver issue - not a bios issue.
I have been able to determine from multiple websites now that the chipset in the s3500F is a nForce 430/6150SE. The current revision (nVidia-15.49) of the driver with windows 7 support does not work. I am currently in the process of trying older version of the nForce 430/6150SE to see which version of the SATAide driver will work with the s3500F in windows 7 ultimate.

Nvidia Networking Controller Drivers in Vista BootCamp ????

I have installed Vista 32bit in BootCamp 3 on my new 13" Macbook Pro, all seemed fine but for some reason, Vista does not recognise the Nvidia Networking Controller driver installed from the bootcamp drivers, it says it failed to load the driver when checked in Device Manager.
Also, I have problems which I think relate to the Broadcom Wireless driver too. Signal strength when running in Snow Leopard is full bars, no problems. But when booted into Windows the wireless signal strength is one bar and oh so poor.
I have to move within a couple of meters of the router to get a good signal.
What is wrong with these drivers ???? i thought Apple supported Vista ????
I have read elsewhere of people suffering at the hands of the poor Broadcom driver, is there any update from Apple for this, or does anyone know of a new version of the drivers from Broadcom at all that give better performance ???
Same with the Nvidia driver, anyone know what to do about that, Apparetnly you can't just go to Nvidia and download the Nforce from there as the Apple OEM drivers are different and I dont even know which Nforce version the laptop uses anyway.
Please Help - Going Insane - Grey - And VERY bald!!!

Anyone have any ideas about this at all ????
I have updated bootcamp to 3.1 now but nothings changed. I did switch on Afterburner, disabled low power consumption and also changed the driver to use b/g/n auto which has helped slightly but not dramatically. As I have said OSX runs full signal so I know theres no router signal issue.

HP 250 G2 usb controller drivers

hello, i'm running a windows 7 64x bit ultimate edition on my hp 250 g2 with CPU N2810.
i'm having a hard time finding some drivers for the following device Universal Serial Bus (USB) Controller.
SP64706 and SP55975 can't install driver. Error: This computer does not meet the minimum requirements for installing the software.

Hello, I just found the solution. Install the newest Intel USB 3.0 Host Controller Driver (International) from this link: http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?javax.portlet.begCacheT...
All of the USB ports on the HP 250 G2 in Windows 7 64 bit will work.

Multemedia controller drivers

Similar Messages

Maybe you are looking for