MULTI PROTOCOL INTERCHANGE
제품 : SQL*NET
작성날짜 : 1997-10-10
COMMONLY ASSERTED MYTHS ABOUT THE ORACLE MULTIPROTOCOL INTERCHANGE
Recent questions have indicated that there are some common misconceptions about
the Oracle MultiProtocol Interchange. In order to clarify precisely what
is and isn't possible with the Oracle MultiProtocol Interchange,
Oracle's Network Products Division hereby presents their first "Commonly
Asserted Myths about the Oracle MultiProtocol Interchange".
This Q&A session is also available from Inventory, part number A16618.
Q. What is the name of the Product?
A. It is called the "Oracle MultiProtocol Interchange". We are
currently seeking this name as a trademark. The product has
inevitably been referred
to as the "MPI", but we would prefer you to use the full name.
Q. What is the Oracle MultiProtocol Interchange?
A. It is an Oracle product that allows SQL*Net V2 clients running on a
specific protocol to connect to SQL*Net V2-based servers which are
running on other protocols.
The Oracle MultiProtocol Interchange enables connections
between clients and servers over unlike protocols transparently.
Q. Will the Oracle MultiProtocol Interchange work with SQL*Net V1?
A. No. The Oracle MultiProtocol Interchange is designed for use with
SQL*Net V2 only and will not work with SQL*Net V1.
Q. But I heard that the Oracle MultiProtocol Interchange will enable me
to connect SQL*Net V1 clients to SQL*Net V2-only servers and
vice-versa. Is this true?
A. No. The Oracle MultiProtocol Interchange does not work with SQL*Net
V1 at all. You can use both SQL*Net V1 and SQL*Net V2 in your
network at the same time, but only SQL*Net V2-based products will
be able to use the Oracle MultiProtocol Interchange.
Q. My customer already has routers in their network that handle multiple
protocols. Why do they need the Oracle MultiProtocol Interchange?
A. A router can route multiple protocols between two or more networks,
but the endpoints of each connection going through a router must use
the same protocol. A router is therefore different from the Oracle
MultiProtocol Interchange in that the Oracle MultiProtocol
Interchange can route data
between endpoints that use different protocols.
Q. My customer already has a protocol gateway in their network. Doesn't this
do the same job as an Oracle MultiProtocol Interchange?
A. Protocol gateways generally only join two protocols together in one
direction only. In contrast, the Oracle MultiProtocol Interchange
supports
as many protocols as will run on a single platform and is bidirectional.
Protocol gateways also transmit data using encapsulation, which makes
them incompatible with SQL*Net in many cases.
Q. My customer has a protocol converter in their network. Will this do the
job that the Oracle MultiProtocol Interchange is intended to do?
A. No. Protocol converters are also generally specific to two protocols and
are highly application specific, converting the functions performed by
one protocol into similar functions performed by another protocol. They
are generally used for terminal emulation, as they operate at low levels
within the communications stack. In contrast, the Oracle MultiProtocol
Interchange does not perform protocol conversion, but merely forwards the
data stream, so protocol incompatibilities are overcome. A protocol
converter will not perform the tasks that the Oracle MultiProtocol
Interchange can perform.
Q. My customer mentions network bridges. What have they got to do with the
Oracle MultiProtocol Interchange?
A. A bridge is a piece of hardware which connects two different types of
physical network media together. This enables protocols to run over
multiple different physical network media. The Oracle MultiProtocol
Interchange works at a higher level than a bridge, and does not concern
itself with the physical network media.
Q. Does the Oracle MultiProtocol Interchange work with RDBMS V6?
A. As SQL*Net V2 is not available with Oracle RDBMS V6, you need Oracle7
databases and Oracle7-based tools running SQL*Net V2 in order to take
advantage of the Oracle MultiProtocol Interchange.
Q. Then how do I handle migration from SQL*Net V1 to SQL*Net V2?
A. Migration is handled by installing SQL*Net V1 and V2 simultaneously on
the server. This allows both V1 and V2 clients to connect to the server.
You can then migrate your clients when it is convenient. Clients can
also
support SQL*Net V1 and V2 simultaneously, with the version to be used
being chosen on a per-connection basis. This enables clients to continue
to access V1-only servers as well as the V2-enabled servers. Clients
using SQL*Net V2 will also be able to use the Oracle MultiProtocol
Interchange to connect to servers running on different protocols.
Q. Are the Oracle Protocol Adapters that I use on my client and server the
same as those used in the Oracle MultiProtocol Interchange?
A. Yes, they are, but each Oracle Protocol Adapter is certified separately
for use in client/server software and the Oracle MultiProtocol
Interchange.
This is because the Oracle MultiProtocol Interchange uses the Oracle
Protocol Adapters in a slightly different way than that of client/server
Protocol Adapters.
Q. Can I use all the Oracle Protocol Adapters available on a platform in the
Oracle MultiProtocol Interchange?
A. No. As the Oracle MultiProtocol Interchange is a critical piece of
network software, each Protocol Adapter on a given platform will be
released with or without support for the Oracle MultiProtocol
Interchange.
Do not use Protocol Adapters in the Oracle MultiProtocol Interchange
unless
they have been certified as supported. Protocols Adapters are only
supported in the Oracle MultiProtocol Interchange when they have passed a
series of stringent integration tests - these tests are performed because
the Oracle MultiProtocol Interchange exerts greater demands on a
protocol than
normal client and server software. Oracle Network Products Division
provides a regular matrix of supported protocols and further information
is available from the INFO mail accounts such as INFONCR and INFOPC.
Q. How many Oracle Protocol Adapters can the Oracle MultiProtocol
Interchange support?
A. Provided that the Oracle Protocol Adapters are certified for use with the
Oracle MultiProtocol Interchange, it can support as many as you like.
The
major benefit of the Oracle MultiProtocol Interchange is that it is not
constrained to specific protocol-protocol connectivity. Every protocol
supported can be used in any combination.
Q. What can I expect in terms of performance when I use the Oracle
MultiProtocol Interchange?
A. This varies depending on platform, protocol and application. You should
expect that connection establishment times will be longer when going
through two or more protocols although the choice of protocol will
determine how much longer. Once the connection is established,
performance degradation over a single protocol connection is roughly
about 5-10%. This figure shows that the Oracle MultiProtocol
Interchange provides an economical alternative to multiple protocol
support on clients
and servers without major performance issues. Oracle Network Products
Division has provided a set of Performance Notes on the
Oracle MultiProtocol Interchange with the SQL*Net V2.0 Sales Kit, and this
information is also available in quickinfo.
Q. Does the Oracle MultiProtocol Interchange give me fault tolerance and
enable me to bypass network failures?
A. It can provide some capabilities in this area. If you have an existing
connection and the section of the network over which the connection is
routed fails, your connection will be lost. If you then attempt to
reestablish the connection, the Oracle MultiProtocol Interchange
may be able to set up your connection between the client and server using
a different route. The ability for it to do this is dependent on
where in the network the failure occurs in relation to the client and the
server.
Q. How does the routing mechanism of SQL*Net V2 work with the Oracle
MultiProtocol Interchange?
A. SQL*Net V2 and the Oracle MultiProtocol Interchange implement a routing
mechanism that is used during connection establishment to determine the
optimum route between client and server. This route is based on the
current SQL*Net configuration files. When a client attempts to initiate a
connection, the routing software in SQL*Net V2 attempts to use the
optimum route, but will fallback to secondary routes if the primary route
is unavailable. In this way, SQL*Net V2 and the Oracle MultiProtocol
Interchange will attempt all possible routes between the client and the
server in order to establish a connection. Failure to establish a
connection will be reported to the client only if all possible routes
have
been attempted.
Q. When I am connected through the Oracle MultiProtocol Interchange, will my
connection get rerouted if the machine with the Oracle MultiProtocol
Interchange crashes?
A. No. The routing mechanism described above is only used during
connection establishment. Once you are connected, all data between the
client and the server follow the same route. If the connection between
the
client and server is broken either because of network, hardware or
software
failure, SQL*Net V2 on the client side will report that the connection
has
been disconnected. If the client side then tries to re-connect, the
routing
software in SQL*Net V2 and the Oracle MultiProtocol Interchange will
attempt to use all possible routes between client and server in order to
establish the connection. This may mean that the connection goes a
different route from the previous connection in order to bypass
failures.
Q. How does my client software know that it is using the Oracle
MultiProtocol
Interchange?
A. The client and server are unaware of the use of Oracle MultiProtocol
Interchanges in a connection, and the actual route taken between the
client
and server is transparent.
Q. How complex is the Oracle MultiProtocol Interchange to configure?
A. SQL*Net Version 2 is provided with a configuration tool which creates the
Oracle MultiProtocol Interchange configuration files. This tool is
simple to use and creates error free configurations. You should not
attempt to create the configuration files for SQL*Net or the Oracle
MultiProtocol Interchange by hand as this method is not supported by
Oracle. Future releases of SQL*Net will provide configuration migration
tools which only work on configurations created with the configuration
tools.
Q. Does the Oracle MultiProtocol Interchange need to be on a standalone
machine?
A. No. The Oracle MultiProtocol Interchange is a piece of software that
can run on the same machine that you also run servers and/or clients. It
is very flexible and does not use all your machine resources. The
choice as to where you install it merely determined by finding a machine
that supports the Oracle MultiProtocol Interchange and has the
appropriate
hardware and software to handle the required protocols. You should
consider a couple of points, however:
. Don't install it on a machine that will be constantly rebooted, or on
a machine where you do software development that may crash the
machine. If the machine crashes or is rebooted, all your connections
through the Oracle MultiProtocol Interchange will be lost!
. Consider the number of concurrent connections you intend to run through
the Oracle MultiProtocol Interchange. If you will have a lot of
concurrent connections, don't install the Oracle MultiProtocol
Interchange
on a machine that also has to support a lot of client or server
connections as well, because the underlying protocol resources may be
exhausted.
Q. Will the Oracle MultiProtocol Interchange solve all my heterogeneous
network connectivity issues for Oracle clients and servers?
A. The Oracle MultiProtocol Interchange is a way of solving certain network
connectivity issues between Oracle clients and servers, but it is not
the only option. You could also consider installing more protocol
support on the client and/or server side in order to overcome the
protocol barriers, although this may be prohibitive if you have a large
client population in your network. Another solution may be to use
database
links in an intermediate server which supports multiple protocols,
although
this may have an affect on performance. Overall, the Oracle
MultiProtocol
Interchange can be considered an economical solution to some
heterogeneous network connectivity issues.
Q. How many connections can an Oracle MultiProtocol Interchange support
concurrently at an adequate level of performance?
A. It depends on the platform and protocols used as well as the types of
application using it. Some platforms or protocols can only support
a limited number of open connections simultaneously. Also, some types
of application generate a lot of network traffic which will effectively
limit the number of supportable concurrent connections that can run with
adequate response time. In other words, there is no single answer.
Oracle
Network Products Division is working on Sizing and Performance metrics
for the Oracle MultiProtocol Interchange at the present time - watch this
space for more information soon.
Q. When should I sell the Oracle MultiProtocol Interchange as a connectivity
solution?
A. Ask the following questions:
- Are there client applications in the customer's network that cannot get
access to the server due to protocol barriers?
- Have all other potential solutions and their cost/benefits been
considered? For example, has it been determined that installing
further
Protocol Adapters on the server side is uneconomical or will not solve
the problem? Also, is it necessary to use a different protocol on the
client side from the the server side in the first place? You should
also check availability of the necessary Protocol Adapters for each
platform you wish to connect together.
- Is there an Oracle MultiProtocol Interchange available that will
resolve
the specific protocol-to-protocol connectivity that the customer
requires?
- Does the customer have a machine in their network that will support the
ls about logistics for each site.
Don u know http://www.catb.org/~esr/faqs/smart-questions.html#writewell
How To Ask Questions The Smart Way
Eric Steven Raymond
Rick Moen
Write in clear, grammatical, correctly-spelled language
We've found by experience that people who are careless and sloppy writers are usually also careless and sloppy at thinking and coding (often enough to bet on, anyway). Answering questions for careless and sloppy thinkers is not rewarding; we'd rather spend our time elsewhere.
So expressing your question clearly and well is important. If you can't be bothered to do that, we can't be bothered to pay attention. Spend the extra effort to polish your language. It doesn't have to be stiff or formal - in fact, hacker culture values informal, slangy and humorous language used with precision. But it has to be precise; there has to be some indication that you're thinking and paying attention.
Spell, punctuate, and capitalize correctly. Don't confuse "its" with "it's", "loose" with "lose", or "discrete" with "discreet". Don't TYPE IN ALL CAPS; this is read as shouting and considered rude. (All-smalls is only slightly less annoying, as it's difficult to read. Alan Cox can get away with it, but you can't.)
More generally, if you write like a semi-literate b o o b you will very likely be ignored. So don't use instant-messaging shortcuts. Spelling "you" as "u" makes you look like a semi-literate b o o b to save two entire keystrokes.
Similar Messages
-
Is it possible to make an multi-protocol IM in JAVA ???
Is it possible to make an multi-protocol IM in JAVA
( like "pidgin IM")
for the simultaneous chat with yahoo,MSN,gtalk
rediff,XMMP clients IM.
I m a newbie in java and know java up to Awt ,
IO & Exception handling.
what concept I have to learn for making this
type of messenger.
plss help..
Thanks !!!!> but can you tell me how to connect in spark IM ??
spark IM is multi-protocol IM or not ??
Read the documentation or contact support for Spark IM. This forum isn't conducive to third-party application support.
> From where should I start for making this
multi-protocol IM ...
This has already been answered in reply #1.
~ -
NET8 CONNECTION MANAGER 설치와 설정방법
제품 : SQL*NET
작성날짜 : 2003-01-15
NET8 CONNECTION MANAGER 설치와 설정방법
=======================================
Purpose
Oracle Connection Manager(v3.0.x)의 설치와 설정 방법을
알아 보고 시작시켜 봅니다.
V3.0.x은 Oracle8 Enterprise Edition에 같이 들어 있으며
Oracle8의 일부는 아닙니다.
1. 설치 방법
2. 설정 방법
3. 시작 하기 (Windows NT)
Explanation
1. 설치 방법
다음 세가지의 실행 파일이 설치 됩니다.
CMGW, CMADMIN, CMCTL (Unix 와 VMS)
CMGW80, CMADM80, CMCTL80(desktop Oracle8에서)
CMGW, CMADMIN, CMCTL(desktop Oracle8i에서)
CMGW/CMGW80
이 것은 Connection Manager의 hub와 같은 역할을 하는
gateway process입니다.
CMGW의 기능은 다음과 같습니다.
- CMADMIN를 등록합니다.
- SQL*Net 2.x와 NET 8.x에서 오는 접속 요청에 대해 대기합니다.
기본적으로 1610 port를 사용합니다.
- NET 8.x listeners에 접속 요청을 발생 시킵니다.
- client와 server사이의 data를 전달합니다.
- CMCTL/CMCTL80에 의해 발생되는 요청에 응답합니다.
CMADMIN/CMADM80
Connection Manager의 모든 관리적인 문제들을 처리하는 multi-threaded
process입니다.
SQL*Net 2.x 와 NET 8.x clients들을 위해
Oracle Names Server에 있는 주소정보를 유지하는 기능을 합니다.
- CMGW/CMGW80 등록 작업을 합니다.
- local Oracle Names Server를 찾습니다.
- 하나이상의 db instance를 서비스하는 모든 listener들을 관리합니다.
- CMGW/CMGW80 와 listener에 대한 주소 정보를 등록합니다.
- 네트워크와 Names Server의 수정된 정보를 감시합니다.
- CMCTL/CMCTL80의 요청에 응답합니다.
CMGW, CMADMIN/CMGW80, 와 CMADM80 의 서로간의 정보전달은 IPC를 통해
이루어 집니다.
CMAN은 주기적으로 Names Server의 바뀐 정보를 cache에 반영합니다.
CMCTL/CMCTL80
CMADM/CMADM80 와 CMGW/CMGW80 를 관리하는 일을 합니다.
현재 제공되는 명령은 start, stop, status, 그리고 version 입니다.
CMCTL START [CMAN | CM | ADM]
이 명령은 Connection Manager 또는 그 구성요소를 시작 시킵니다.
- 인자가 없는 경우 또는 CMAN을 준 경우는 gateway 와
administration process를 시작시킵니다.
- CM 을 주면 gateway process 만 시작됩니다.
- ADM 을 주면 administration process 만 시작됩니다.
CMCTL STOP [CM]
Connection Manager process들을 중지 시킵니다.
- 인자가 없는 경우 또는 CM 을 준 경우 gateway 와
administration process 모두를 중지시킵니다.
gateway process가 중단될 경우 administration process는 자동으로
중단됩니다.
현재 진행중인 접속이 있는 경우 CMAN 는 중지될 수 없습니다.
CMCTL STATUS [CMAN | CM | ADM]
이 명령은 Connection Manager의 요소들의 상태를 보여줍니다.
- 인자가 없거나 CMAN이나 CM일 경우 gateway process의 상태를 보여 줍니다.
- ADM은 administration process의 상태를 보여 줍니다.
CMCTL VERSION
이 명령은 control utility의 버젼을 보여 줍니다.
CMGW/CMGW80 와 CMADM/CMADM80의 버젼은 status명령으로 볼 수 있습니다.
2. 설정 방법
client들은 tnsnames.ora 이나 Oracle Names Server 가 필요합니다.
Connection Manager는 cman.ora 가 필요하며 server는 init.ora에 MTS설정이
필요합니다.
client설정
tnsnames.ora파일의 예 입니다.
EXAMPLE=
(DESCRIPTION=
(ADDRESS=
(PROTOCOL=TCP)
(HOST=SERVER.US.ORACLE.COM)
(PORT=1521)
(CONNECT_DATA=
(SID=ORCL)
하나의 protocol로 Connection Manager를 사용하는 tnsnames.ora파일 예입니다.
EXAMPLE_CMAN=
(DESCRIPTION=
(ADDRESS_LIST=
(ADDRESS=
(PROTOCOL=TCP)
(HOST=CMAN.US.ORACLE.COM)
(PORT=1610)
(ADDRESS=
(PROTOCOL=TCP)
(HOST=SERVER.US.ORACLE.COM)
(PORT=1521)
(CONNECT_DATA=
(SID=ORCL)
(SOURCE_ROUTE=YES)
ADDRESS_LIST가 path입니다.
첫번째 주소가 CMAN에 접속하는 정보이고, 두번째 주소가 서버에
접속할때 CMAN에 의해 사용되는 주소입니다.
필요하다면 ADDRESS_LIST 안에 여러개의 CMAN 의 주소를 설정할
수 있습니다. CMAN은 기본적으로 라우터처럼 동작합니다.
접속 요청을 다음 hop으로 지정합니다.
여러개의 protocol로 Connection Manager를 사용하는
tnsnames.ora파일 예입니다.
EXAMPLE_CMAN=
(DESCRIPTION=
(ADDRESS_LIST=
(ADDRESS=
(PROTOCOL=SPX)
(SERVICE=CMAN)
(ADDRESS=
(PROTOCOL=TCP)
(HOST=SERVER.US.ORACLE.COM)
(PORT=1521)
(CONNECT_DATA=
(SID=ORCL)
(SOURCE_ROUTE=YES)
위의 예에서 CMAN에 접속하기 위해서 client는 SPX를 사용하고
server에 접속하기 위해서 CMAN은 TCP/IP를 사용하게 됩니다.
Oracle7에서 소개된 Oracle Multi-Protocol Interchange (MPI)과
같은 기능을 합니다.
만일 서버까지 가는데 한개 이상의 router가 있는 경우
SQL*Net 2.3에서 소개된 DESCRIPTION_LIST를 사용할 수 있습니다.
다음은 DESCRIPTION_LIST를 사용한 tnsnames.ora 파일의 예 입니다.
EXAMPLE_ROUTES=
(DESCRIPTION_LIST=
(DESCRIPTION=
(ADDRESS_LIST=
(ADDRESS=
(PROTOCOL=TCP)
(HOST=CMAN1.US.ORACLE.COM)
(PORT=1610)
(ADDRESS=
(PROTOCOL=TCP)
(HOST=SERVER.US.ORACLE.COM)
(PORT=1521)
(CONNECT_DATA=
(SID=ORCL)
(SOURCE_ROUTE=YES)
(DESCRIPTION=
(ADDRESS_LIST=
(ADDRESS=
(PROTOCOL=TCP)
(HOST=CMAN2.US.ORACLE.COM)
(PORT=1610)
(ADDRESS=
(PROTOCOL=TCP)
(HOST=SERVER.US.ORACLE.COM)
(PORT=1521)
(CONNECT_DATA=
(SID=ORCL)
(SOURCE_ROUTE=YES)
만일 Oracle Names Server를 사용하면 Connection Manager는 자동으로
CMAN을 위한 주소를 Names Server에 있는 기존의 주소에 추가하게 됩니다.
SQLNET.ORA파일에 다음과 같은 parater를 설정할 수 있습니다.
USE_CMAN = [TRUE | FALSE]
- TRUE 라고 설정하면 CMAN이 무작위로 뽑은 간접적인 경로를 이용해
client를 접속시킵니다. ( 적어도 하나의 CMAN address가 있는
address list)
- TRUE 그리고 description에 간접 경로가 없는 경우에는 무작위로 뽑은
경로가 사용됩니다.
- FALSE 이거나 설정이 안된 경우 무작위로 뽑힌 경로가 사용됩니다.
Connection Manager 설정
CMAN 은 한개의 파일(CMAN.ORA)로 설정된다.
CMAN.ORA 파일은 다음 세개의 부분으로 구성된다.
1) CMAN - Connection Manager를 위한 listening주소를 포함한다.
2) CMAN_PROFILE - CMAN 설정 parameter들을 포함한다.
3) CMAN_RULES - 접속 요청에 대한 필터링에 관련된 규칙을 포함한다.
CMAN=
(ADDRESS_LIST=
(ADDRESS=
(PROTOCOL=SPX)
(SERVICE=CMAN)
(ADDRESS=
(PROTOCOL=TCP)
(HOST=CMAN.US.ORACLE.COM)
(PORT=1610)
이 CMAN의 예에서는 SPX 와 TCP/IP 두개의 주소에서 listening하고 있습니다.
CMAN 은 CMAN이 실행되는 장비에서 oracle이 지원하는 모든 protocol에 대해
listen할 수 있습니다.
CMAN_PROFILE=
(PARAMETER_LIST=
(MAXIMUM_RELAYS=64)
(LOG_LEVEL=0)
(TRACING=YES)
(RELAY_STATISTICS=YES)
(SHOW_TNS_INFO=NO)
(USE_ASYNC_CALL=YES)
(AUTHENTICATION_LEVEL=0)
각 parameter들에 대한 정의 :
MAXIMUM_RELAYS = n
- 허용되는 최대 동시 접속수
- 기본값 8
- 최대값 1024
LOG_LEVEL = n
- CMAN에 의해 수행되는 logging의 level설정
- 기본값 0 ( logging이 안됨 )
- 0에서부터 4까지의 값을 설정할 수 있음
TRACING = [YES | NO]
- YES로 설정하면 CMAN은 파일에 tracing을 한다.
- 기본값 NO
주의: trace파일을 읽기위새허는 Oracle Trace를 사용하면 됩니다.
RELAY_STATISTICS = [YES | NO]
- YES는 I/O활동에 대한 통계정보를 저장하게 합니다.
예를 들어 :
- IN bytes 수
- OUT bytes 수
- IN packets 수
- OUT packets 수
- 기본값 NO
SHOW_TNS_INFO = [YES | NO]
- Yes로 설정하면 log 파일에 TNS events를 포함하게 합니다.
- 기본값 NO
USE_ASYNC_CALL = [YES | NO]
- YES로 설정하면 CMAN 접속을 실행하고 받아들이고 대답하는 과정에서
모든 비동기적인 기능을 사용할 수 있게 합니다.
- 기본값 NO
주의: CMAN은 out-of-band breaks를 지원합니다.
CMAN은 그것을 서버로 전달합니다.
AUTHENTICATION_LEVEL = [0 | 1]
- 1로 설정하게 되면 CMAN은 Secure Network Services를 사용하지 않은
접속 요청은 거절하게 됩니다
Secure Network Services은 Advanced Networking Option의 일부입니다.
- 기본값은 0 입니다.
즉 Secure Network Services가 필요없다는 뜻입니다.
CMAN_RULES=
(RULE_LIST=
(RULE=
(SRC = shost)
(DST = dhost)
(SRV = services)
(ACT = accept | reject)
CMAN_RULES에 정의된 parameter들:
- shost 는 client에서 session을 요청한 source hostname 이거나
IP address입니다.
- dhost 는 서버쪽의 hostname 이거나 IP address 입니다.
- services 는 SID 이름입니다.
- ACT: 위 세개의 parameter들의 값을 근거로한 들어오는 접속요청에
대한 승인이나 거절입니다.
주의: wild-card는 'x'입니다. IP address (d.d.d.d)인 경우에
각 'd'는 wild-card character인 'x'로 교체될 수 있습니다.
RULE_LIST내에 여러 RULE들이 정의될 수 있습니다.
여러 rule들 중에 처음에 맞는 rule이 그 요청에 적용됩니다.
CMAN_RULES이 존재하는 경우 Connection Manager는 규칙에 허용되지 않은
것들은 모두 허락되지 않게 합니다.
만일 CMAN_RULES이 정의되지 않았다면 모든것이 허용됩니다.
Connection Manager의 제한
만일 connection path에 사용된 Connection Manager가 한개 이상이라면 (1개
이상의 hop이라면), tnsnames.ora를 직접 설정해야 하며 Oracle Names Server
를 사용할 수 없습니다.
TCP/IP network에서만 Connection Manager는 접근 통제(CMAN_RULES)를 할 수
있습니다.
Oracle Multi-Protocol Interchange (MPI) 과의 호환성
client와 server사이에 단 하나의 MPI만 있다면, MPI를
Connection Manager로 교체하십시요.
client와 server사이에 여러개의 MPI가 있다면,
tnsnames.ora를 수정해서 MPI들을 Connection Manager들로
교체하십시요.
SQL*Net V2.x client와의 호환성
Connection Manager를 SQL*Net 2.x clients과 Oracle 8사이의
중심이나 접속 필터로 사용하기 위해서는 다음과 같은 일을
해야 합니다.
1) Connection Manager를 설치하고 설정합니다..
2) SQL*Net v2.x client들을 Connection Manager를 MPI처럼 사용
하도록 설정 합니다.
Server 설정
===========
NET8의 새로운 기능을 이용하기 위해서는 Connection Manager를 설정
해야 하며 서버를 Multi-Threaded Server (MTS)로 설정해야 합니다.
MTS parameter들은 각 instance의 INIT.ORA파일에 설정합니다.
NET8 MTS를 위한 parameter들은 SQL*Net 2과 다르지 않습니다.
다음 Connection Pooling 과 Multiplexing 기능을 사용할때
MTS_DISPATCHERS parameter의 경우만 제외하면 말입니다.
MTS_DISPATCHERS parameter:
MTS_DISPATCHERS ="(PROTOCOL=TCP)(POOL=NO)(MULT=ON)"
이 예에서 TCP/IP를 위해 dispatcher들을 설정하고 Connection Pooling
기능을 사용하지 못하게 하고, Multiplexing를 가능하게 합니다.
만일 Connection Pooling 과 Multiplexing 를 사용하지 않을 거라면
SQL*Net 2.x용으로 정의된 MTS parameter들을 사용하실 수 있습니다.
좀더 자세한 내용은 MTS관련 문서를 참조 하시기 바랍니다.
Connection Manager를 사용하는 경우, INIT.ORA에 새로운 parameter를
설정해야 합니다. Connection Manager는 한개 이상의 physical connection
을 만들기 때문에 instance의 dispatcher가 허용할 client sessions의 최대값을
알아야 합니다. SESSIONS라는 parameter가 이 값을 설정합니다.
이 값은 'LSNRCTL SERVICES' 명령으로 볼 수 있습니다.
3. 시작 하기 (Windows NT)
Oracle Names server 환경에서 :
- command line utility 사용하기
1. 작업 표시줄에서 시작->실행
열기: x:\CMCTL80.exe (8i에서는 CMCTL.exe)
OK<click>
2. CMCTL> start CMAN <enter>
- Windows NT 제어판 사용하기
1. 제어판>SERVICES <double click>
2. 다음을 찾아 시작 시킵니다.
(주의: 순서대로 시작시켜야 합니다.)
OracleCMAdminService80 <click start>
OracleCMANService80 <click start>
NON-Oracle Names server 환경에서 :
- command line utility 사용하기
1. 작업 표시줄에서 시작->실행
열기: x:\CMCTL80.exe (8i에서는 CMCTL.exe)
OK<click>
2. CMCTL> start CM <enter>
- Windows NT 제어판 사용하기
1. 제어판>SERVICES <double click>
2. 다음을 찾아 시작 시킵니다.
(주의: 순서대로 시작시켜야 합니다.)
OracleCMANService80 <click start>
Reference Ducumment
---------------------Hi
You must install the Connection Manager, available on the Oracle8 distribution media, onto the Web server host. You can find the installation instructions in the Net8 Administrator's Guide.
On the Web server host, create a CMAN.ORA file in the [ORACLE_HOME]/NET8/ADMIN directory. The options you can declare in a CMAN.ORA file include firewall and connection pooling support
Here is an example of a very simple CMAN.ORA file. Replace <web-server-host> with the name of your Web server host. The fourth line in the file indicates that the connection manager is listening on port 1610. You must use this port number in your connect string for JDBC.
cman = (ADDRESS_LIST =
(ADDRESS = (PROTOCOL=TCP)
(HOST=<web-server-host>)
(PORT=1610)))
cman_profile = (parameter_list =
(MAXIMUM_RELAYS=512)
(LOG_LEVEL=1)
(TRACING=YES)
(RELAY_STATISTICS=YES)
(SHOW_TNS_INFO=YES)
(USE_ASYNC_CALL=YES)
(AUTHENTICATION_LEVEL=0)
Ariel G. -
Can a raid be moved between protocols (eSata/Firewire/USB)?
If I get two multi-protocol drive enclosures (like the OWC Quad interface enclosures) and set them up as a RAID 0 under, say, eSata, does anyone know if I can move them to another computer, plug them in as, say, FireWire, and then continue to use the RAID?
This is mostly to assure myself that if my (contemplated) Mac Pro goes back for repairs for a week or two, I can continue to work on my Mac Mini.
TIA
Dual G5 + 15" MBP 2GHz Mac OS X (10.4.9)Yes. The type of connection is not relevant. You can move the enclosure connection to Firewire, USB, or SATA (if you have an external SATA port.)
-
Controlling interchange id in UNB
We have a situation where we send EDIFACT D96A INVOIC messages from BPEL to B2B for transport with SFTP to different external parties. The problem is that both the host and some of the external partners represent multiple companies and use multiple identification schemes (always EDI Interchange ID but different values). We have defined the trading partners in B2B with more than one EDI Interchange Id. That is fine and incoming messages are recognized correctly. However, when we send outgoing invoices the UNB segment is incorrect.
Looking at the wire message for an outgoing invoice the headers are fine:
TO=correct_to_value
FROM_PARTY=correct_from_value
But the payload is not:
UNA:+,?*'UNB+UNOC:3+wrong_value:ZZ+wrong_value:ZZ+080904:1124+1025+ '
Real values removed for privacy reasons.
Basically the override value from document protocol "Interchange Sender Identification" always seems to be used for the host and if that field is undefined the value in the UNB becomes blank!
How should this be done? Is it possible to set the override to a macro of some kind (i.e. #FROM_PARTY# or #TO#), or what is the proper procedure? Is it a bug - it feels odd that the id is set to space if there is no override?Hello Erik,
There are two ways used to overide the Interchange Sender ID in the Document Protocol Parameters for CONTRL. The first way is to use the remote tp delivery channel in the agreement where the Exchange Protocol Parameters for EDI Interchange Sender ID has been set. This way also applies to other documents.
The second way is to set oracle.tip.adapter.b2b.edi.FAInternalProperties=true in tip.properties. When this is set, there will in Internal-Properties in the xml instance which overides the Interchange Sender ID in the Document Protocol Parameters.
Rgds,Ramesh -
New macbook Pro setback for Audio Production.
the new macbook pro don't come with a Firewire 400 port anymore.
everybody knows that usb is too slow for audio transfer and Firewire 800 is usual.
audio interfaces that use firewire 400 can't be used and with only one firewire 800 port there's no room left 'cause we need that to connect the external drives with audio files.
most interfaces need to be connected directly to the computer.
Any Ideas????I, too, have an issue with the port configuration on MBPs -- too many USB2.0 ports, not enough FW800 ports. Nevertheless, please note that:
1. Bilingual FW800 FW400 cables (really good ones) are available for less than $20.
2. You can daisy chain external FW HDDs (even heterogeneously, i.e. you can cable your computer to a FW800 device using a FW800 cable and then use a FW400 cable to connect the first drive to a FW400 HDD, etc.). This capability is dependent on having redundant or multi-protocol drive enclosures (that is, you will need drives that have at least two FW ports, such as two FW800 ports or a FW800 port plus a FW400 port, not just a single USB2.0 port).
3. You can go hog wild and purchase a full-on FW800 hub/repeater like the NitroAV Professional Firewire/1394b 8-Port device (google it). I use this device to connect five external HDDs to my MBP (four FW800 drives and one FW400 drive). This hub will set you back $150 -- not trivial, but an elegant solution if you use multiple drives, and it comes with the AC power adapter (believe it or not, some hub manufacturers require you to purchase the AC adapter separately). In my configuration, six ports are used -- five for the drives and the sixth to connect the MBP via a FW800 cable. The hub has the additional advantage of eliminating several of the cables that would otherwise connect directly to my computer, which is, after all, a laptop; the fewer things I have to connect/disconnect when I move my MBP around, the better. You can think of this as a do-it yourself version of the docking station that Apple forgot to give us, at least as far as drive connectivity is concerned!
As an aside, my MBP (see model notes below) does in fact have both a FW800 and a FW400 port. I wish Apple configured unibody MBPs to include two USB2.0 ports and two FW800 ports -- but the above tips make the world right.
Finally, I just don't get the gripe about cabling costs. The unibody MBPs are high end laptops -- most purchasers will have invested well over $3K in their machines. There are a thousand usage patterns; I would much rather buy what I need for my applications without incurring the expense of purchasing bundled stuff that I don't need and which winds up in a (bursting at the seams) cable/doodad drawer. -
Is there a decent and newbie-friendly group chat solution available?
The problem: we want to move away from Skype for our group chats, but can't find a satisfying alternative.
What we do right now: we use group chats a lot, for various purposes, but mainly a) discussing certain topics, or b) planning activities/inviting people over, etc. People use all kinds of different operating systems.
Currently we use Skype for that. The advantage of Skype is its ease of use: users can create group chats by simply clicking on a few names. Chats are persistent: if you go online and come back the next day, you'll still be in the chat, and you will be able to read what was discussed in the meantime. If you add somebody to a chat, they are in it immediately, without having to enter a room address, or a password, or something like that. The participants of a chat control who gets added to it, and you cannot join a chat without being invited.
The disadvantage is its closedness, which makes us depend on a single vendor's client software and their monetary interests. Plus it has been bought by Microsoft, so the future of the already lagging development of the Linux version is unclear - and users of other OSes have been generally unhappy with the recent versions. Also users can not integrate Skype into already existing multi-protocol-messengers like Pidgin, they have to run the official Skype version at all times they want to chat at.
Quite a while ago a couple of us made an attempt to move our group chats to Jabber, but the acceptance was really low - opening a chat room was a hassle, they had to be password protected to be private, invitations weren't automatic, or the invitation features of clients were buggy, and by going offline you left a chat room, meaning people had to rejoin the next time they were online, and didn't automatically get to read the conversation that was held while they had been away. IRC is out of the question too, because it lags nearly all the features mentioned above.
Now I am wondering if anybody here knows about a free, open Chat software, that makes group chat (nearly) as easy as they are in Skype.Well, IRC does not meet quite a few of our criteria. A typical chat lifecycle might look like this:
User A decides he wants to play football the next week. He starts a chat, adds 10 contacts that he knows might be interested, and makes a suggestion for a date and time. People come online, instantly see the chat and everything that has been written, answer, etc. Others join the chat later, see what has been said, and leave. Somebody might invite a couple of others to the chat, which will be immediately added. People play football, have a bit of postgame discussion, and then either plan the next session, or the chat dies.
I just do not see how this is a workflow that we can easily achieve with IRC - at least not in a way that people will be happy with.
- you can not automatically add people to a chat afaik
- chat history is not persistent afaik
- you do not necessarily want everybody to be able to just join a chat, but you also do not want to do a lot of configuration to restrict access to a chat/channel, when it might be about tonights event.
- people do not want to type /join #birthday_present_for_xyz, they just want to be added
I don't know why, but the openmeetings demo just doesn't really work for me - I get a lot of connection errors, it's painfully slow and hangs itself. -
Connecting an older computer to my wireless router.
My wireless router is connected to my work computer which is in the same room as my own personal computer. I can hard wire the two together since they are only a few feet apart, but my older computer only has a phone line connection. Are there cables with a ethernet plug on one end and a phone line size plug on the other, or what do I have to do to hard wire these together. My older computer, which still works just fine for my personal needs does not have wireless capability so I was hoping somehow I could hard wire this to the router. Any help is much appreciated.
Message Edited by bzmom23 on 09-14-2008 09:32 PM
Message Edited by bzmom23 on 09-15-2008 05:31 AMAlso, does the older computer support USB? (Don't laugh; there's a method to the suggestion!) Even if, for some reason, there's no room to mount a wired or wireless network adapter inside the computer, there's nothing stopping you from using a USB network adapter (wired or wireless) to connect to the same computer. Since there are USB wireless network adapters available (wireless-b, wireless-G, and wireless-N, as well as multi-protocol), do give serious consideration to having one or more around (if for no other reason than as spares); I'm looking to pick up one or two such USB adapters for my two-computer all-wired network (the router is a WRT54GS V.2, but may shortly be replaced with a WRT-310N for additional range and wired gigabit support). I've had my GS since 2005, and I'm very happy with it.
-
I need to upgrade my macbook's RAM-how do i upgrade?
i have a macbook that i need to upgrade to 4 or 8GB of RAM. what i need to know is if this is a good quality of RAM.
heres the link (i will try and post the info for you but i dont know if i will get everything you need to know so i will post the link as well)
this one is the 4GB
http://eshop.macsales.com/item/Other%20World%20Computing/8566DDR3S4GP/
this one is the 8GB
http://eshop.macsales.com/item/Other%20World%20Computing/8566DDR3S8GP/
the reason i need to upgrade is because i use my macbook for all of my video and picture editing. i use imovie and iphoto. what i need to know is should i upgrade to the 4 or the 8? i want to get lion but i need more ram before i upgrade because i have heard that if you dont have 4GB of ram or more lion runs slow. also i need to know if this is good ram. i know that there are different kinds of ram so i want to know how good this ram is and if it will hold up to my standards.
also what is your opion about buying lion? does anyone like lion? should i wait for mountain lion? and does anyone know what the mountain lion specs are?New and changed features in 10.8
Deeper integration of iCloud, which includes new Open and Save dialog boxes across built-in applications, iWork and third-party applications via an API. Applications that make use of this API support a new user interface to view and manage documents in the cloud that are specific to the application being used.[6]
Automatic synchronization of documents in iWork with iCloud
Messages – a multi-protocol instant messaging and texting client (replacing iChat); supports the iMessage service. Also available on Mac OS X 10.7 "Lion" as a beta version.[7]
Reminders – a to-do list application, also on iOS, separated from Calendar[8]
Notes – previously in iOS and separated from Mail into its own application, with support for desktop notes added[9], replacing Stickies[10]
Share Sheets – a "Share" button and dialog box in Safari and other applications[11]
Game Center – borrowed from iOS[12]
AirPlay Mirroring – remote broadcast of OS X desktop to Apple TV via AirPlay[13]
Gatekeeper[14] – an anti-malware feature based on digital signatures and the Mac App Store
Twitter integration[15]
Notification Center – A desktop version similar to the one introduced in iOS 5. Application pop-ups are now concentrated on the corner of the screen, and the Center itself is pulled from the right side of the screen.[16]
More Chinese features – has additional features for users in China, including support for Baidu as an option for Safari search engine, QQ, 163.com and 126.com services for Mail, Contacts and Calendar, Youku, Tudou and Sina Weibo are integrated into share sheets.[17]
Time Machine is able to do rotating backups on more than one storage medium.[18]
Renamed applications
iCal is renamed "Calendar"[6]
Address Book is renamed "Contacts"[6]
iChat has been enhanced and renamed "Messages"[7] (see above)
Dropped features
RSS support in Mail and Safari has been removed[19]
Software Update – has been unified into the Mac App Store[20]
X11.app – users are directed to the open source XQuartz project instead[21] -
JMQ cluster and unstable connections
Hello all.
I have a few architectural questions about building an OpenMQ message-passing infrastructure between multiple offices which do not always have on-line internet connections. We also need to distribute the MQ mesh configuration info.
From the scale of my questions it seems, that I or our developers don't fully understand MQ, because I think that many of our problems and/or solution ideas (below) should already be implemented within the MQ middleware, and not by us from outside it.
The potential client currently has a (relatively ugly) working solution which they wanted to revise for simplification, if possible, but this matter is not urgent and answers are welcome at any timeframe :)
I'd welcome any insights, ideas and pointers as to why our described approach may be plain wrong :)
To sum this post up, here's my short questionnaire:
1) What is a good/best way to distribute MQ mesh config when not all nodes are available simultaneously?
2) What are the limitations on number of brokers and queues in one logical mesh?
3) Should we aim for separate "internal" and "external" MQ networks, or can they be combined into one large net?
4) Should we aim for partial solution external to OpenMQ (such as integration with SMTP for messaging, or SVN for config distribution), or can this quest be solved within OpenMQ functionality?
5) Can a clustered broker be forced to fully start without available master broker connection?
6) Are broker clusters inherently local-network, or is there some standard solution (pattern) for geographically disperse MQ clusters?
7) How to enforce pushing of the messages from one broker to another? Are any priority assignments available for certain brokers and "their" queues?
Detailed rumblings follow below...
We are thinking about implementing JMQ in a geographically disperse project, where it will be used for asynchronous communications to connect application servers in different branch offices with a central office. The problematic part is, that the central and especially branch offices are not expected to be always on-line, hence the MQ - whenever a connection is available, queued messages (requests, responses, etc.) are to be pushed to the other side's MQ broker. And if all goes well with the project, there may eventually be hundreds of such branch offices and more than one central office for failover, and a mesh of interconnection MQ agreements.
The basic idea is simple: an end-user of the app server in a branch generates a request, this request is passed via message queue to another branch or to a central office, then another app server processes it to generate a response and the answer is queued back to the requesting app server. At some time after the initial request, the end-user would see in his web-page that the request's status has been updated with a response value. A branch office's app server and MQ broker may be an appliance-server distributed as a relatively unmaintained "black box".
During the POC we configured several JMQ broker instances in this manner and it worked. From what I gather from our developers, each branch office's request and response queues are separate destinations in the system, and requests (from a certain branch) may be subscribed by any node, and responces (to a certain branch) may be submitted by any node. This may be restricted by passwords and/or certificate-based SSL tunnel channels, for example (suggestions welcome, though).
However, we also wanted to simplify spreading the configuration of the MQ nodes' network by designating "master brokers" (as per JMQ docs) which keep track of the config and each other broker downloads the cluster config from its master. Perhaps it was wrong on our side, and a better idea is available to avoid manual reconfiguration of each MQ broker whenever another broker or a queue destination is added?
Problem here is: it seems an "MQ cluster" is a local-network oriented concept. When we have a master broker in a central office, and the inter-connection is not up, branch offices loop indefinitely waiting for connection to a master, and reject client connections (published JMS port remains 0, and appropriate comments in the log files). In this case the branch office can not function until its JMQ broker connects to a central office, updates the MQ config, and permits client connections to itself.
Also we are not certain (and it seems to be a popular question on Google, too) how to enforce a queued message to be pushed to another side - to a broker "nearest" to the target app server? Can this be done within OpenMQ config, or does this require an MQ client application to read and manipulate such messages somehow? For example, when a branch office's "request" queue has a message, and a connection to central office comes online, this request data should end up in the central office's broker. Apparently, a message which physically remains in the branch office broker when the interconnection goes offline, is of little use to the central appserver...
I was thinking along the lines of different-priority brokers for a certain destinations, so that messages would automatically flow from further brokers to neares ones - like water flows from higher ground to lower ground in an aqueduct. It would then be possible to easily implement transparent routing between branch offices (available at non-intersecting times) via central office (always up).
How many brokers and destination can be interconnected at all (practically or theoretically/hardcoded)?
Possibly, there are other means to do some or all of this?
Ideas we've discussed internally include:
* Multiple networks of MQ brokers:
Have an "internal" broker (cluster) in each branch office which talks to the app server, and a separate "external" broker which is clustered with the central office's "master broker". Some branch office application transfers messages between two brokers local to its branch. Thus the local appserver works okay, and remote queuing works whenever network is available.
Possibly, the central office should also have separate internal and external broker setups?
* Multi-tiered net of MQ brokers:
Perhaps there can be "clusters of clusters" - with "external" tier-1 brokers being directly master brokers for local "internal" tier-2 clusters? Otherwise the idea of "miltiple networks of MQ brokers" above, without an extra app to relay messages between MQ brokers local to this app.
* Multi-protocol implementation of MQ+SMTP(+POP3/IMAP)
Many of our questions are solvable by SMTP. That is, we can send messages to a mailbox residing on a specific server (local in each office), and local appserver clients retrieve them by POP3 from the local mailbox server, and then submit responses over SMTP. This is approximately how the client currently solves this task now.
We don't really want to invent a bicycle, but maybe this approach can also be applied to JMQ (asynch traffic not over MQ protocol, but over SMTP like in SOAP-SMTP vs. SOAP-HTTP webservices)?
* HTTP/RCS-based config file:
The OpenMQ config allows for the detailed configuration file to be available in local filesystem or on a web server. It is possible to fetch the config file from a central office whenever the connection is up (wget, svn/cvs/etc.) and restart the branch broker.
Why is this approach good or bad? Advocates welcome :)
Thanks for reading up to the end,
and thanks in advance for any replies,
//Jim KlimovHello all.
I have a few architectural questions about building an OpenMQ message-passing infrastructure between multiple offices which do not always have on-line internet connections. We also need to distribute the MQ mesh configuration info.
From the scale of my questions it seems, that I or our developers don't fully understand MQ, because I think that many of our problems and/or solution ideas (below) should already be implemented within the MQ middleware, and not by us from outside it.
The potential client currently has a (relatively ugly) working solution which they wanted to revise for simplification, if possible, but this matter is not urgent and answers are welcome at any timeframe :)
I'd welcome any insights, ideas and pointers as to why our described approach may be plain wrong :)
To sum this post up, here's my short questionnaire:
1) What is a good/best way to distribute MQ mesh config when not all nodes are available simultaneously?
2) What are the limitations on number of brokers and queues in one logical mesh?
3) Should we aim for separate "internal" and "external" MQ networks, or can they be combined into one large net?
4) Should we aim for partial solution external to OpenMQ (such as integration with SMTP for messaging, or SVN for config distribution), or can this quest be solved within OpenMQ functionality?
5) Can a clustered broker be forced to fully start without available master broker connection?
6) Are broker clusters inherently local-network, or is there some standard solution (pattern) for geographically disperse MQ clusters?
7) How to enforce pushing of the messages from one broker to another? Are any priority assignments available for certain brokers and "their" queues?
Detailed rumblings follow below...
We are thinking about implementing JMQ in a geographically disperse project, where it will be used for asynchronous communications to connect application servers in different branch offices with a central office. The problematic part is, that the central and especially branch offices are not expected to be always on-line, hence the MQ - whenever a connection is available, queued messages (requests, responses, etc.) are to be pushed to the other side's MQ broker. And if all goes well with the project, there may eventually be hundreds of such branch offices and more than one central office for failover, and a mesh of interconnection MQ agreements.
The basic idea is simple: an end-user of the app server in a branch generates a request, this request is passed via message queue to another branch or to a central office, then another app server processes it to generate a response and the answer is queued back to the requesting app server. At some time after the initial request, the end-user would see in his web-page that the request's status has been updated with a response value. A branch office's app server and MQ broker may be an appliance-server distributed as a relatively unmaintained "black box".
During the POC we configured several JMQ broker instances in this manner and it worked. From what I gather from our developers, each branch office's request and response queues are separate destinations in the system, and requests (from a certain branch) may be subscribed by any node, and responces (to a certain branch) may be submitted by any node. This may be restricted by passwords and/or certificate-based SSL tunnel channels, for example (suggestions welcome, though).
However, we also wanted to simplify spreading the configuration of the MQ nodes' network by designating "master brokers" (as per JMQ docs) which keep track of the config and each other broker downloads the cluster config from its master. Perhaps it was wrong on our side, and a better idea is available to avoid manual reconfiguration of each MQ broker whenever another broker or a queue destination is added?
Problem here is: it seems an "MQ cluster" is a local-network oriented concept. When we have a master broker in a central office, and the inter-connection is not up, branch offices loop indefinitely waiting for connection to a master, and reject client connections (published JMS port remains 0, and appropriate comments in the log files). In this case the branch office can not function until its JMQ broker connects to a central office, updates the MQ config, and permits client connections to itself.
Also we are not certain (and it seems to be a popular question on Google, too) how to enforce a queued message to be pushed to another side - to a broker "nearest" to the target app server? Can this be done within OpenMQ config, or does this require an MQ client application to read and manipulate such messages somehow? For example, when a branch office's "request" queue has a message, and a connection to central office comes online, this request data should end up in the central office's broker. Apparently, a message which physically remains in the branch office broker when the interconnection goes offline, is of little use to the central appserver...
I was thinking along the lines of different-priority brokers for a certain destinations, so that messages would automatically flow from further brokers to neares ones - like water flows from higher ground to lower ground in an aqueduct. It would then be possible to easily implement transparent routing between branch offices (available at non-intersecting times) via central office (always up).
How many brokers and destination can be interconnected at all (practically or theoretically/hardcoded)?
Possibly, there are other means to do some or all of this?
Ideas we've discussed internally include:
* Multiple networks of MQ brokers:
Have an "internal" broker (cluster) in each branch office which talks to the app server, and a separate "external" broker which is clustered with the central office's "master broker". Some branch office application transfers messages between two brokers local to its branch. Thus the local appserver works okay, and remote queuing works whenever network is available.
Possibly, the central office should also have separate internal and external broker setups?
* Multi-tiered net of MQ brokers:
Perhaps there can be "clusters of clusters" - with "external" tier-1 brokers being directly master brokers for local "internal" tier-2 clusters? Otherwise the idea of "miltiple networks of MQ brokers" above, without an extra app to relay messages between MQ brokers local to this app.
* Multi-protocol implementation of MQ+SMTP(+POP3/IMAP)
Many of our questions are solvable by SMTP. That is, we can send messages to a mailbox residing on a specific server (local in each office), and local appserver clients retrieve them by POP3 from the local mailbox server, and then submit responses over SMTP. This is approximately how the client currently solves this task now.
We don't really want to invent a bicycle, but maybe this approach can also be applied to JMQ (asynch traffic not over MQ protocol, but over SMTP like in SOAP-SMTP vs. SOAP-HTTP webservices)?
* HTTP/RCS-based config file:
The OpenMQ config allows for the detailed configuration file to be available in local filesystem or on a web server. It is possible to fetch the config file from a central office whenever the connection is up (wget, svn/cvs/etc.) and restart the branch broker.
Why is this approach good or bad? Advocates welcome :)
Thanks for reading up to the end,
and thanks in advance for any replies,
//Jim Klimov -
Patch Manager lists patches i already installed... help!
Update Manager is still showing 173 patches which i already installed on May 20th.
The "Installed Patches" section is showing 0 patches.
I am Running Solaris 10 on x86 Dual Xeon
Once all the patches were applied I linked 2 folders off to *{color:#0000ff}/export/home{color}* to save space on the root drive...
but as far as i was aware this should not make a difference.
Below you can see my {color:#0000ff}*/var/sadm*{color} folder
# pwd
/var/sadm/patch
# cd ..
# ls -al
total 38
drwxr-xr-x 13 root sys 512 May 21 11:16 .
drwxr-xr-x 43 root sys 1024 May 22 10:12 ..
drwxr-xr-x 2 root root 512 May 20 16:26 .patchRec
dr-xr-xr-x 4 root bin 512 May 20 16:26 install
drwxr-xr-x 2 root sys 512 Jul 21 2007 install_data
lrwxrwxrwx 1 root root 28 May 21 11:16 patch -> /export/home/var/sadm/patch/
lrwxrwxrwx 1 root root 26 May 21 11:16 pkg -> /export/home/var/sadm/pkg/
drwxr-xr-x 2 root root 512 Jul 21 2007 prod
-r--r--r-- 1 root sys 1092 Jan 10 2005 README
dr-xr-xr-x 2 root sys 512 May 20 16:00 security
drwxr-xr-x 7 root bin 512 Jul 21 2007 smc
drwxr-xr-x 2 root sys 512 Jul 21 2007 softinfo
drwxr-xr-x 5 root sys 3072 Jun 6 10:26 spool
drwxr-xr-x 2 root sys 512 Jul 21 2007 svm3
drwxr-xr-x 5 root sys 512 Jul 21 2007 system
drwxr-xr-x 6 root sys 512 Jul 24 2007 wbemWhen i cd to {color:#0000ff}*/export/home/var/sadm/patch*{color} it lists the 173 patches.
When i cd to {color:#0000ff}*/export/home/var/sadm/pkg*{color} it lists 1057 packages.
In the Update Manager, the spool directory is{color:#0000ff} */export/home/patches*{color}, there are no patches in here. I cleaned them out.
When i attempt to install an already installed patch, it fails (which is good) but doesn't remove the patch from the list.
Has anyone any ideas how i can get Update Manager back to normal?
Thanks
Michael
Please find below my suc.sh output
Fri Jun 6 11:22:10 BST 2008
SERVERNAME
smpatch settings:
patchpro.backout.directory "" ""
patchpro.baseline.directory - /var/sadm/spool
patchpro.download.directory /export/home/patches /var/sadm/spool
patchpro.install.types - rebootafter:reconfigafter:standard
patchpro.patch.source - https://getupdates1.sun.com/
patchpro.patchset current current
patchpro.proxy.host my-company-proxy ""
patchpro.proxy.passwd **** ****
patchpro.proxy.port 8089 8080
patchpro.proxy.user "" ""
smpatch analyze:
120901-03 SunOS 5.10_x86: libzonecfg patch
121334-04 SunOS 5.10_x86: zoneadmd, zlogin and zoneadm patch
119255-53 SunOS 5.10_x86: Install and Patch Utilities Patch
126420-01 SunOS 5.10_x86: umountall patch
113000-07 SunOS 5.10_x86: SUNWgrub patch
117435-02 SunOS 5.10_x86: biosdev patch
121264-01 SunOS 5.10_x86: cadp160 driver patch
122035-05 SunOS 5.10_x86: awk nawk Patch
118344-14 SunOS 5.10_x86: Fault Manager Patch
123840-04 SunOS 5.10_x86: Fault Manager Patch
119043-11 SunOS 5.10_x86: svccfg & svcprop patch
118855-36 SunOS 5.10_x86: kernel patch
119082-25 SunOS 5.10_x86: CD-ROM Install Boot Image Patch
124629-06 SunOS 5.10_x86: CD-ROM Install Boot Image Patch
119253-25 SunOS 5.10_x86: System Administration Applications Patch
120200-13 SunOS 5.10_x86: sysidtool Patch
124631-16 SunOS 5.10_x86: System Administration Applications, Network, and Core Libraries Patch
121431-22 SunOS 5.8_x86 5.9_x86 5.10_x86: Live Upgrade Patch
124189-02 SunOS 5.10_x86: Trusted Solaris Attributes Patch
121309-12 SunOS 5.10_x86: Solaris Management Console Patch
123122-02 SunOS 5.10_x86: usr/lib/libwsreg.so.1 Patch
128338-01 SunOS 5.10_x86: aac patch
119964-08 SunOS 5.10_x86: Shared library patch for C++_x86
120754-05 SunOS 5.10_x86: Microtasking libraries (libmtsk) patch
118677-03 SunOS 5.10_x86: patch for Solaris make and sccs utilities
119961-03 SunOS 5.10_x86, x64, Patch for assembler
126539-01 SunOS 5.10_x86: i.manifest and r.manifest patch
119784-05 SunOS 5.10_x86 : bind patch
119813-07 X11 6.6.2_x86: Freetype patch
118919-21 SunOS 5.10_x86: Solaris Crypto Framework patch
119575-02 SunOS 5.10_x86: su patch
120273-21 SunOS 5.10_x86: SMA patch
122641-06 SunOS 5.10_x86: zfs genesis patch
127756-01 SunOS 5.10_x86: Fault Manager patch
125504-02 SunOS 5.10_x86: package-move-of-IP-objects patch
125548-02 SunOS 5.10_x86: zoneadm indirect dependency patch
126424-03 SunOS 5.10_x86: bootadm patch
120012-14 SunOS 5.10_x86: kernel patch
126207-04 SunOS 5.10_x86: zebra ripd quagga patch
122829-02 SunOS 5.10_x86: lsimega driver patch
127889-07 SunOS 5.10_x86: ipf patch
128335-01 SunOS 5.10_x86: ibd patch
127128-11 SunOS 5.10_x86: kernel patch
128325-02 SunOS 5.10_x86: ixgb driver patch
120236-01 SunOS 5.10_x86: Live Upgrade Zones Support Patch
121429-09 SunOS 5.10_x86: Live Upgrade Zones Support Patch
120293-01 SunOS 5.10_x86 : mysql patch
127891-03 SunOS 5.10_x86: nge patch
119318-01 SunOS 5.10_x86: SVr4 Packaging Commands (usr) Patch
138053-01 SunOS 5.10_x86: marvell88sx driver patch
128007-04 SunOS 5.10_x86: usbsksp patch
125365-02 SunOS 5.10_x86: adpu320 driver patch
126869-02 SunOS 5.10_x86: SunFreeware bzip2 patch
137322-01 SunOS 5.10_x86: p7zip patch
121454-02 SunOS 5.10_x86: Sun Update Connection Client Foundation
137022-01 SunOS 5.10_x86: format patch
124998-01 SunOS 5.10_x86: /usr/bin/tip patch
137018-02 SunOS 5.10_x86: crontab patch
138045-01 SunOS 5.10_x86: bge patch
138043-01 SunOS 5.10_x86: MAC patch
119144-02 SunOS 5.10_x86: patch lib/libinetutil.so.1
121013-02 SunOS 5.10_x86: traceroute patch
121005-04 SunOS 5.10_x86: sh patch
123913-01 SunOS 5.10_x86: ppriv patch
137290-01 SunOS 5.10_x86: st driver patch
127738-01 SunOS 5.10_x86: fifofs patch
137281-01 SunOS 5.10_x86: dld patch
126656-01 SunOS 5.10_x86: poll driver patch
125175-02 SunOS 5.10_x86: tl driver patch
128401-01 SunOS 5.10_x86: sd driver patch
121297-01 SunOS 5.10_x86: fgrep patch
122365-01 SunOS 5.10_x86: bscbus, bscv driver patch
118368-04 SunOS 5.10_x86: csh Patch
128333-01 SunOS 5.10_x86: conskbd patch
128331-01 SunOS 5.10_x86: pax patch
128295-02 SunOS 5.10_x86: rpcmod patch
128307-04 SunOS 5.10_x86: devfs patch
125907-01 SunOS 5.10_x86: pcn driver patch
128301-03 SunOS 5.10_x86: zoneinfo timezones patch
126541-02 SunOS 5.10_x86: libumem library patch
127965-05 SunOS 5.10_x86: UFS utilities patch
127960-01 SunOS 5.10_x86: rpcsec patch
117181-01 SunOS 5.10_x86: /kernel/drv/pcscsi patch
121604-02 SunOS 5.10_x86: libcfgadm.so.1, scsi.so.1 patch
137131-01 SunOS 5.10_x86: xpv driver patch
137094-01 SunOS 5.10_x86: logindevperm patch
137092-01 SunOS 5.10_x86: arp patch
127923-04 SunOS 5.10_x86: cpio patch
121134-02 SunOS 5.10_x86: power patch
126441-01 SunOS 5.10_x86: rm patch
121082-08 SunOS 5.10_x86: Disable Transport Agentry for Sun Update Connection Hosted EOL
120831-06 SunOS 5.10_x86: vi and ex patch
127854-02 SunOS 5.10_x86: sad driver patch
138076-01 SunOS 5.10_x86: mpt driver patch
137033-01 SunOS 5.10_x86: namefs patch
118960-03 SunOS 5.10_x86: patch usr/bin/acctcom and usr/bin/lastcomm
128001-01 SunOS 5.10_x86: in.ftpd patch
119975-08 SunOS 5.10_x86: fp plug-in for cfgadm
119131-33 SunOS 5.10_x86: Sun Fibre Channel Device Drivers
125165-10 SunOS 5.10_x86: Qlogic ISP Fibre Channel Device Driver
125185-05 SunOS 5.10_x86: Sun Fibre Channel Device Drivers
120223-27 SunOS 5.10_x86: Emulex-Sun LightPulse Fibre Channel Adapter driver
120347-09 SunOS 5.10_x86: Common Fibre Channel HBA API and Host Bus Adapter Libraries
120349-02 SunOS 5.10_x86: Fibre Channel HBA Port utility
136883-01 SunOS 5.10_x86: ImageMagick patch
124944-01 SunOS 5.10_x86: SunFreeware gzip man pages patch
125214-02 SunOS 5.10_x86: SunFreeware zlib man pages patch
127785-01 SunOS 5.10_x86: SunFreeware bzip2 man pages patch
120295-01 SunOS 5.10_x86 : mysql man patch
121668-02 SunOS 5.10_x86 : pilot-link header patch
121805-03 SunOS 5.10_x86: GRUB patch
120720-02 SunOS 5.10_x86 : SunFreeware gzip patch
125173-01 SunOS 5.10_x86: llc2 patch
126654-02 SunOS 5.10_x86: md patch
122086-01 SunOS 5.10_x86: nispasswd patch
122078-03 SunOS 5.10_x86: NIS yp utilities patch
119471-11 SunOS 5.10_x86: Sun Enterprise Network Array firmware and utilities
138166-01 SunOS 5.10_x86: sppp driver patch
123591-08 SunOS 5.10_x86: PostgresSQL patch
120330-02 SunOS 5.10_x86: rexec patch
128293-01 SunOS 5.10_x86: rsm patch
126134-03 SunOS 5.10_x86: sshd Patch
119758-12 SunOS 5.10_x86: Samba patch
122655-05 SunOS 5.10_x86: jumpstart and live upgrade compliance patch
137872-01 SunOS 5.10_x86: tk patch
128305-03 SunOS 5.10_x86: ehci and scsa2usb patch
128329-01 SunOS 5.10_x86: usbms patch
127885-01 SunOS 5.10_x86: awk patch
125732-02 SunOS 5.10_x86: XML and XSLT libraries patch
137047-01 SunOS 5.10_x86: amd8111s patch
119091-27 SunOS 5.10_x86: Sun iSCSI Device Driver and Utilities
137148-04 SunOS 5.10_x86: libexpat patch
120202-06 X11 6.8.0_x86: Xorg client libraries patch
123614-01 X11 6.6.2_x86: OpenGL patch
125720-21 X11 6.8.0_x86: Xorg server patch
121621-03 SunOS 5.10_x86: Patch for mediaLib in Solaris
120536-15 SunOS 5.10_x86: Updated video drivers and fixes
123896-04 SunOS 5.9_x86 5.10_x86: Common Agent Container (cacao) runtime 2.1 upgrade patch 04
119214-17 NSS_NSPR_JSS 3.11.9_x86: NSPR 4.7 / NSS 3.11.9 / JSS 4.2.6
118668-16 JavaSE 5.0_x86: update 15 patch (equivalent to JDK 5.0u15)
118669-16 JavaSE 5.0_x86: update 15 patch (equivalent to JDK 5.0u15), 64bit
119060-41 X11 6.6.2_x86: Xsun patch
124394-06 CDE 1.6_x86: Dtlogin smf patch
123612-05 X11 6.6.2_x86: Trusted Extensions patch
119281-18 CDE 1.6_x86: Runtime library patch for Solaris 10
119279-23 CDE 1.6_x86: dtlogin patch
121735-07 SunOS 5.10_x86: patch to support addition of new UTF-8 locales
119704-11 S10_x86: Patch for localeadm issues
125901-01 SunOS 5.10_x86: audiohd patch
122762-01 SunOS 5.10_x86: Sun Update Connection Bootstrapper
118778-11 SunOS 5.10_x86: Sun GigaSwift Ethernet 1.0 driver patch
119247-32 SunOS 5.10_x86: Manual Page updates for Solaris 10
121976-01 CDE 1.6_x86: Xsession patch
120411-28 SunOS 5.10_x86: Internet/Intranet Input Method Framework patch
119811-05 SunOS 5.10_x86: International Components for Unicode Patch
120100-08 APOC 1.2_x86: Sun Java(tm) Desktop System Configuration Shared Libraries
119547-08 APOC 1.2_x86: APOC Configuration Agent Patch
125280-05 CDE1.6_x86: dtsession patch
125282-02 CDE 1.6_x86: sdtimage patch
122670-01 Evolution 1.4.6_x86: Cryptographic Library patch
123939-01 GNOME 2.6.0_x86: GNU Transport Layer Security Library Patch
119415-14 GNOME 2.6.0_x86: Gnome Accessibility Libraries Patch
119599-08 GNOME 2.6.0_x86: Gnome Screen Reader and Magnifier Patch
120461-14 GNOME 2.6.0_x86: Gnome libs Patch
122213-25 GNOME 2.6.0_x86: GNOME Desktop Patch
119901-05 GNOME 2.6.0_x86: Gnome libtiff - library for reading and writing TIFF Patch
119549-12 GNOME 2.6.0_x86: Gnome Multi-protocol instant messaging client Patch
125544-02 GNOME 2.6.0_x86: GNOME panel applets
121096-02 GNOME 2.6.0_x86: GNOME EXIF tag parsing library for digital cameras
120740-04 GNOME 2.6.0_x86: GNOME PDF Viewer based on Xpdf
137081-01 SunOS 5.10_x86: libpng Patch
119116-34 Mozilla 1.7_x86 patch
125333-03 JDS 3_x86: Macromedia Flash Player Plugin Patch
119904-02 Openwindows 3.7.3_x86: Xview Patch
125726-02 X11 6.6.2_x86: xinerama patch
124458-01 X11 6.6.2_x86: xdm patch
119064-01 SunOS 5.10_x86: libXpm patch
Sun UC patch revision:
119789-08
119789-09
120336-04
121082-06
121082-08
121119-09
121119-12
121119-13
121454-02
123004-02
123006-05
123631-01
123631-03
123896-04
124187-03
124187-07
124615-01
Solaris release:
Solaris 10 11/06 s10x_u3wos_10 X86
Copyright 2006 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 14 November 2006
Java -version:
java version "1.5.0_15"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_15-b04)
Java HotSpot(TM) Server VM (build 1.5.0_15-b04, mixed mode)
Cacao Java version:
java-home=/usr/jdk/jdk1.5.0_15
Software Cluster:
CLUSTER=SUNWCall
All ccr properties:
20:
Property not defined: 20
cns.assetid:
69e3IYbsEWGYkbEj4Sh7IC/MmzM=
cns.br.SunUCenabled:
true
cns.ccr.keyGenPath:
/usr/lib/cc-ccr/bin/ccrKeyGen
cns.clientid:
a71dcd7d-80ad-460e-a90d-2ccad3c61a6a
cns.httpproxy.auth:
cns.httpproxy.ipaddr:
my-company-proxy
cns.httpproxy.port:
8089
cns.patchsvr.cachelocation:
/var/sadm/spool/patchsvr
cns.patchsvr.patchsource:
https://getupdates1.sun.com/
cns.regtoken:
f6deec68-e017-4b69-a454-17fb2734b587:1216944000000:T
cns.security.password:
YztBI1HobSLyOaRhjA7lJjZf8RkBtlsGnD+E6zw7WYIT
cns.security.privatekey:
-----BEGIN ENCRYPTED PRIVATE KEY-----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-----END ENCRYPTED PRIVATE KEY-----
cns.security.publickey:
-----BEGIN PUBLIC KEY-----
MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQDiAk601x255FlI/+B/1ol/pVXM
aco3+SOjm1Otxy8T66MmmLNnCHskqVEo1Y5+WrirfMDslaPBjBEeu4iSK4sgbGpK
InSXobdF7h7HecLtPBlczV8+lPBD0bEHYPwSVAZBIL0IhrEx8/Jl/SUgxz9Driaf
E9iWD+oViJ+JSmw5IwIDAQAB
-----END PUBLIC KEY-----
cns.swup.UMautolaunch:
false
cns.swup.autoAnalysis.enabled:
true
cns.swup.checkinInterval:
2
cns.swup.lastCheckin:
0
cns.swup.patchbaseline:
current
cns.swup.regRequired:
true
cns.transport.serverurl:
https://cns-transport.sun.com
patchsvr settings:
Patch source URL: https://getupdates1.sun.com/
Cache location: /var/sadm/spool/patchsvr
Web proxy host name: my-company-proxy
Web proxy port number: 8089
Sun UC package status:
SUNWbreg not installed
SUNWdc not installed
Please attach /tmp/sv4503-060608-suc-out.Z in your reply to the Sun Update Connection Technical Support Team.Edited by: mdreelin on Jun 6, 2008 10:32 AMTry moving the files in /export/home/var/sadm/patch and /export/home/var/sadm/patch back to their correct locations.
You might then find that updatemanager works as expected again. Did you ever stop to think what those directories were used for? -
VERY strange lag on a Dell Optiplex 760
I thought it would be a good idea to keep a 16GB flash drive on my keychain that booted Arch so I could work on HW for college in a consistent OS! Everything is working great so far, but I ran into a very strange problem with a Dell Optiplex 760. During the normal Arch init process, everything loads great, except for when it gets to the udev stage where everything hangs. But here's the strange part of this scenario: the problems go away when I start typing random keys or move the mouse! If I don't do this, the system hangs completely from what I can tell. This happens at the console and with X.
The service tag for this machine is FDCQQJ1, and the dell.com driver area brings up this list of hardware and (windows) drivers for it.
Here's the #lspci -vv of the system:
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
Subsystem: Dell Device 027f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller])
Subsystem: Dell Device 027f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 33
Region 0: Memory at fe800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at ec90 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 41c1
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: i915
Kernel modules: i915
00:02.1 Display controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03)
Subsystem: Dell Device 027f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fe700000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:03.0 Communication controller: Intel Corporation 4 Series Chipset HECI Controller (rev 03)
Subsystem: Dell Device 027f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at feda6000 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
00:03.2 IDE interface: Intel Corporation 4 Series Chipset PT IDER Controller (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: Dell Device 027f
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at fe80 [size=8]
Region 1: I/O ports at fe90 [size=4]
Region 2: I/O ports at fea0 [size=8]
Region 3: I/O ports at feb0 [size=4]
Region 4: I/O ports at fef0 [size=16]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
00:03.3 Serial controller: Intel Corporation 4 Series Chipset Serial KT Controller (rev 03) (prog-if 02 [16550])
Subsystem: Dell Device 027f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at ec98 [size=8]
Region 1: Memory at fe6d8000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Kernel driver in use: serial
00:19.0 Ethernet controller: Intel Corporation 82567LM-3 Gigabit Network Connection (rev 02)
Subsystem: Dell Device 027f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 32
Region 0: Memory at fe6e0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fe6d9000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at ecc0 [size=32]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 41d1
Capabilities: [e0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device 027f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at ff20 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #5 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device 027f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at ff00 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.2 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #6 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device 027f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at fc00 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB2 EHCI Controller #2 (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device 027f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at fe6da000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device: Intel Corporation 82801JD/DO (ICH10 Family) HD Audio Controller (rev 02)
Subsystem: Dell Device 027f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe6dc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80
Status: NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000feda8000
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 82801JD/DO (ICH10 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: fe500000-fe5fffff
Prefetchable memory behind bridge: 000000007e000000-000000007e1fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #5, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4189
Capabilities: [90] Subsystem: Dell Device 027f
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=01 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000feda8000
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation 82801JD/DO (ICH10 Family) PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fe400000-fe4fffff
Prefetchable memory behind bridge: 000000007e200000-000000007e3fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #4, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4191
Capabilities: [90] Subsystem: Dell Device 027f
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=02 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000feda8000
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device 027f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at ff80 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device 027f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at ff60 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device 027f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at ff40 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB2 EHCI Controller #1 (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device 027f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at ff980000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Dell Device 027f
00:1f.0 ISA bridge: Intel Corporation 82801JD (ICH10D) LPC Interface Controller (rev 02)
Subsystem: Dell Device 027f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel modules: iTCO_wdt
00:1f.2 IDE interface: Intel Corporation 82801JD/DO (ICH10 Family) 4-port SATA IDE Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Dell Device 027f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at fe00 [size=8]
Region 1: I/O ports at fe10 [size=4]
Region 2: I/O ports at fe20 [size=8]
Region 3: I/O ports at fe30 [size=4]
Region 4: I/O ports at fec0 [size=16]
Region 5: I/O ports at eca0 [size=16]
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ata_piix
Kernel modules: ata_piix
00:1f.3 SMBus: Intel Corporation 82801JD/DO (ICH10 Family) SMBus Controller (rev 02)
Subsystem: Dell Device 027f
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe6db000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at ece0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
00:1f.5 IDE interface: Intel Corporation 82801JD/DO (ICH10 Family) 2-port SATA IDE Controller (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Dell Device 027f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at fe40 [size=8]
Region 1: I/O ports at fe50 [size=4]
Region 2: I/O ports at fe60 [size=8]
Region 3: I/O ports at fe70 [size=4]
Region 4: I/O ports at fed0 [size=16]
Region 5: I/O ports at ecb0 [size=16]
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ata_piix
Kernel modules: ata_piix
I have googled around a bit, and I've read about others (surprisingly) having the same issue, but I've found no answers to my avail yet.Here are the packages installed on my system, with versions (output of pacman -Qs):
local/a2ps 4.14-1
a2ps is an Any to PostScript filter
local/a52dec 0.7.4-4
liba52 is a free library for decoding ATSC A/52 streams.
local/acl 2.2.48-1 (base)
Library for filesystem ACL support
local/alsa-lib 1.0.22-1
An alternative implementation of Linux sound support
local/alsa-utils 1.0.22-2
An alternative implementation of Linux sound support
local/aspell 0.60.6-4
A spell checker designed to eventually replace Ispell
local/ati-dri 7.7-1
Mesa DRI drivers for AMD/ATI Radeon
local/atk 1.28.0-1
A library providing a set of interfaces for accessibility
local/attr 2.4.44-1 (base)
Extended attribute support library for ACL support
local/autoconf 2.65-1 (base-devel)
A GNU tool for automatically configuring source code
local/automake 1.11.1-1 (base-devel)
A GNU tool for automatically creating Makefiles
local/avahi 0.6.25-3
A multicast/unicast DNS-SD framework
local/b43-firmware 4.150.10.5-1
Firmware for Broadcom B43 wireless networking chips
local/b43-fwcutter 012-1
firmware extractor for the bcm43xx kernel module
local/bash 4.1.002-2 (base)
The GNU Bourne Again shell
local/beanshell 2.0b4-1
Small, free, embeddable, source level Java interpreter with object based
scripting language features written in Java
local/bin86 0.16.17-4 (base-devel)
A complete 8086 assembler and loader
local/binutils 2.20-3 (base)
A set of programs to assemble and manipulate binary and object files
local/bison 2.4.1-1 (base-devel)
The GNU general-purpose parser generator
local/bzip2 1.0.5-5 (base)
A high-quality data compression program
local/ca-certificates 20090814-2
Common CA certificates
local/ca-certificates-java 20090629-2
Common CA certificates (JKS keystore)
local/cabextract 1.2-2
A program to extract Microsoft cabinet (.CAB) files.
local/cairo 1.8.10-1
Cairo vector graphics library
local/cairomm 1.8.4-1
C++ bindings to Cairo vector graphics library
local/cdparanoia 10.2-2
Compact Disc Digital Audio extraction tool
local/cloog-ppl 0.15.7-1
Library that generates loops for scanning polyhedra
local/compositeproto 0.4.1-1
X11 Composite extension wire protocol
local/consolekit 0.4.1-2
A framework for defining and tracking users, login sessions, and seats
local/coreutils 8.4-1 (base)
The basic file, shell and text manipulation utilities of the GNU operating
system
local/cpio 2.10-1 (base)
A tool to copy files into or out of a cpio or tar archive
local/cracklib 2.8.13-2 (base)
Password Checking Library
local/cryptsetup 1.1.0-2 (base)
Userspace setup tool for transparent encryption of block devices using the
Linux 2.6 cryptoapi
local/curl 7.20.0-1
An URL retrival utility and library
local/cyrus-sasl-plugins 2.1.23-1
Cyrus Simple Authentication Service Layer (SASL) library
local/damageproto 1.2.0-1
X11 Damage extension wire protocol
local/dash 0.5.5.1-2 (base)
A POSIX compliant shell that aims to be as small as possible
local/db 4.8.26-1 (base)
The Berkeley DB embedded database system
local/dbus 1.2.20-1
Freedesktop.org message bus system
local/dbus-core 1.2.20-1
Freedesktop.org message bus system
local/dbus-glib 0.82-2
GLib bindings for DBUS
local/dcron 4.4-2 (base)
dillon's lightweight cron daemon
local/desktop-file-utils 0.15-1
Command line utilities for working with desktop entries
local/device-mapper 2.02.60-3 (base)
Device mapper userspace library and tools
local/dhcpcd 5.2.1-1 (base)
RFC2131 compliant DHCP client daemon
local/dialog 1.1_20100119-1 (base)
A tool to display dialog boxes from shell scripts
local/diffutils 2.9-1 (base)
Utility programs used for creating patch files
local/dmidecode 2.10-1
Desktop Management Interface table related utilities
local/dmxproto 2.3-1
X11 Distributed Multihead X extension wire protocol
local/dosfstools 3.0.9-1
DOS filesystem utilities
local/dri2proto 2.1-2
X11 DRI protocol
local/e2fsprogs 1.41.10-1 (base)
Ext2/3/4 filesystem utilities
local/ed 1.4-1 (base-devel)
A POSIX-compliant line editor
local/eggdbus 0.6-1
Experimental D-Bus bindings for GObject
local/eject 2.1.5-4
Eject is a program for ejecting removable media under software control
local/enca 1.13-1
Charset analyser and converter
local/enchant 1.5.0-3
A wrapper library for generic spell checking
local/eventlog 0.2.9-1
A new API to format and send structured log messages
local/exo 0.3.106-1 (xfce4)
Extensions to Xfce by os-cillation
local/expat 2.0.1-5
An XML Parser library written in C
local/faac 1.28-2
FAAC is an AAC audio encoder
local/faad2 2.7-1
ISO AAC audio decoder
local/fakeroot 1.14.4-2 (base-devel)
Gives a fake root environment, useful for building packages as a
non-privileged user
local/farsight2 0.0.17-1
Audio/Video conference software for Instant Messengers
local/ffmpeg 22511-1
Complete and free Internet live audio and video broadcasting solution for
Linux/Unix
local/file 5.04-2 (base)
File type identification utility
local/filesystem 2010.02-4 (base)
Base filesystem
local/findutils 4.4.2-1 (base)
GNU utilities to locate files
local/fixesproto 4.1.1-1
X11 Fixes extension wire protocol
local/flac 1.2.1-2
Free Lossless Audio Codec
local/flashplugin 10.0.45.2-1
Adobe Flash Player
local/flex 2.5.35-3 (base-devel)
A tool for generating text-scanning programs
local/fluidsynth 1.1.1-2
A real-time software synthesizer based on the SoundFont 2 specifications
local/fontcacheproto 0.1.3-1
X11 font cache extension wire protocol
local/fontconfig 2.8.0-1
A library for configuring and customizing font access
local/fontsproto 2.1.0-1
X11 font extension wire protocol
local/freeglut 2.6.0-1
Provides functionality for small OpenGL programs
local/freetype2 2.3.12-1
TrueType font rendering library
local/fribidi 0.19.2-1
A Free Implementation of the Unicode Bidirectional Algorithm
local/frozen-bubble 2.2.0-2
A game in which you throw colorful bubbles and build groups to destroy the
bubbles
local/fuse 2.8.3-1
A library that makes it possible to implement a filesystem in a userspace
program.
local/gamin 0.1.10-1
Gamin is a file and directory monitoring system defined to be a subset of
the FAM (File Alteration Monitor) system.
local/gawk 3.1.7-1 (base)
Gnu version of awk
local/gcc 4.4.3-1 (base-devel)
The GNU Compiler Collection
local/gcc-libs 4.4.3-1 (base)
Runtime libraries shipped by GCC for C and C++ languages
local/gconf 2.28.0-1
A configuration database system
local/gdbm 1.8.3-6 (base)
GNU database library
local/gdk-pixbuf 0.22.0-7
Image loading and manipulation library
local/gen-init-cpio 2.6.32-1 (base)
Program to compress initramfs images
local/gettext 0.17-3 (base)
GNU internationalization library
local/ghostscript 8.71-2
An interpreter for the PostScript language
local/giflib 4.1.6-3
A library for reading and writing gif images
local/git 1.7.0.2-1
the fast distributed version control system
local/gksu 2.0.2-2
A graphical frontend for su
local/glib 1.2.10-8
Common C routines used by Gtk+ and other libs
local/glib2 2.22.4-1
Common C routines used by GTK+ 2.4 and other libs
local/glibc 2.11.1-1 (base)
GNU C Library
local/glibmm 2.22.1-1
Glib-- (glibmm) is a C++ interface for glib
local/gmp 4.3.2-1
A free library for arbitrary precision arithmetic
local/gnome-icon-theme 2.28.0-1 (gnome)
Default icon theme for GNOME2
local/gnome-keyring 2.28.2-1
GNOME Password Management daemon
local/gnutls 2.8.5-1
A library which provides a secure layer over a reliable transport layer
local/google-chrome-dev 5.0.342.3-1
Google Chrome Developer preview channel for Linux
local/gparted 0.5.2-1
A Partition Magic clone, frontend to GNU Parted
local/gpm 1.20.6-5
A mouse server for the console and xterm
local/gqview 2.0.4-3
An image browser and viewer
local/grep 2.5.4-3 (base)
A string search utility
local/groff 1.20.1-4
GNU troff text-formatting system
local/grub 0.97-16 (base)
A GNU multiboot boot loader
local/gsfonts 8.11-5
Ghostscript standard Type1 fonts
local/gstreamer0.10 0.10.28-1
GStreamer Multimedia Framework
local/gstreamer0.10-base 0.10.28-1
GStreamer Multimedia Framework Base plugin libraries
local/gstreamer0.10-base-plugins 0.10.28-1 (gstreamer0.10-plugins)
GStreamer Multimedia Framework Base Plugins (gst-plugins-base)
local/gstreamer0.10-python 0.10.18-1
Python bindings for GStreamer 0.10
local/gtk 1.2.10-10
The GTK+ toolkit
local/gtk-aurora-engine 1.5.1-1
gtk-engine: latest member of the clearlooks family
local/gtk-xfce-engine 2.6.0-1 (xfce4)
A port of Xfce engine to GTK+-2.0
local/gtk2 2.18.7-1
The GTK+ Toolkit (v2)
local/gtkmm 2.18.2-1
C++ bindings for gtk2
local/gtkspell 2.0.16-1
GtkSpell provides word-processor-style highlighting and replacement of
misspelled words in a GtkTextView widget
local/gzip 1.4-1 (base)
GNU compression utility
local/hal 0.5.14-2
Hardware Abstraction Layer
local/hal-info 0.20091130-1
Hardware Abstraction Layer information files
local/hdparm 9.27-2 (base)
A shell utility for manipulating Linux IDE drive/driver parameters
local/heimdal 1.3.1-3
Implementation of Kerberos V5 libraries
local/hicolor-icon-theme 0.11-1
Freedesktop.org Hicolor icon theme
local/hsqldb-java 1.8.1.1-1
HSQLDB Java libraries
local/htop 0.8.3-1
Interactive process viewer
local/hunspell 1.2.8-2
Spell checker and morphological analyzer library and program
local/hyphen 2.4-1
library for high quality hyphenation and justification
local/icon-naming-utils 0.8.90-1
Maps the new names of icons for Tango to the legacy names used by the GNOME
and KDE desktops.
local/icu 4.2.1-1
International Components for Unicode library
local/ilmbase 1.0.1-1
IlmThread is a thread abstraction library for use with OpenEXR
local/imagemagick 6.6.0.0-1
An image viewing/manipulation program
local/imlib2 1.4.2-6
Library that does image file loading and saving as well as rendering,
manipulation, arbitrary polygon support
local/initscripts 2010.01-1 (base)
System initialization/bootup scripts
local/inputproto 2.0-1
X11 Input extension wire protocol
local/intel-dri 7.7-1
Mesa DRI drivers for Intel
local/iproute2 2.6.31-1
IP Routing Utilities
local/iptables 1.4.7-1
A Linux kernel packet control tool
local/iputils 20100214-2 (base)
IP Configuration Utilities (and Ping)
local/iso-codes 3.14-1
Lists of the country, language, and currency names
local/jack 0.116.2-1
A low-latency audio server
local/jasper 1.900.1-5
A software-based implementation of the codec specified in the emerging
JPEG-2000 Part-1 standard
local/jfsutils 1.1.14-1 (base)
JFS filesystem utilities
local/json-glib 0.10.0-1
JSON library built on GLib
local/kbd 1.15.1-1 (base)
Keytable files and keyboard utilities
local/kbproto 1.0.4-1
X11 XKB extension wire protocol
local/kernel26 2.6.32.10-1 (base)
The Linux Kernel and modules
local/kernel26-firmware 2.6.32.10-1 (base)
The included firmware files of the Linux Kernel
local/kernel26-headers 2.6.32.10-1
Header files and scripts for building modules for kernel26
local/ladspa 1.13-2
Linux Audio Developer's Simple Plugin API (LADSPA)
local/lame 3.98.3-1
An MP3 encoder and graphical frame analyzer
local/lcms 1.18-3
Lightweight color management development library/engine
local/less 436-1 (base)
A terminal based program for viewing text files
local/libarchive 2.8.3-1
library that can create and read several streaming archive formats
local/libass 0.9.9-1
A portable library for SSA/ASS subtitles rendering
local/libcap 2.19-1
POSIX 1003.1e capabilities
local/libcddb 1.3.2-1
Library that implements the different protocols (CDDBP, HTTP, SMTP) to
access data on a CDDB server (e.g. http://freedb.org).
local/libcdio 0.82-1
GNU Compact Disc Input and Control Library
local/libcroco 0.6.2-1
GNOME CSS2 parsing and manipulation toolkit
local/libcups 1.4.2-3
The CUPS Printing System - client libraries and headers
local/libdaemon 0.14-1
A lightweight C library which eases the writing of UNIX daemons
local/libdatrie 0.2.3-1
Libdatrie is an implementation of double-array structure for representing
trie, as proposed by Junichi Aoe.
local/libdca 0.0.5-2
Free library for decoding DTS Coherent Acoustics streams
local/libdmx 1.1.0-1
X11 Distributed Multihead extension library
local/libdrm 2.4.18-2
Userspace interface to kernel DRM services
local/libdvbpsi 0.1.6-3
MPEG TS and DVB PSI tables library (needed by vlc for streaming)
local/libdvdnav 4.1.3-2
The library for xine-dvdnav plugin.
local/libdvdread 4.1.3-1
libdvdread provides a simple foundation for reading DVD video disks
local/libebml 0.7.8-2
Extensible Binary Meta Language library
local/libevent 1.4.13-1
An event notification library
local/libexif 0.6.19-1
A library to parse an EXIF file and read the data from those tags
local/libfetch 2.30-1 (base)
URL based download library
local/libfontenc 1.0.5-1
X11 font encoding library
local/libgcrypt 1.4.5-1 (base)
a general purpose crypto library based on the code used
local/libgksu 2.0.12-1
gksu authorization library
local/libgl 7.7-1
Mesa 3-D graphics library and DRI software rasterizer
local/libglade 2.6.4-1
Allows you to load glade interface files in a program at runtime
local/libgpg-error 1.7-2 (base)
Support library for libgcrypt
local/libgraphite 2.3.1-1
SILGraphite - a "smart font" rendering engine - the libs and headers
local/libgsf 1.14.16-1
The GNOME Structured File Library is a utility library for reading and
writing structured file formats
local/libgssglue 0.1-2
exports a gssapi interface which calls other random gssapi libraries
local/libgtop 2.28.0-1
A library that read information about processes and the running system
local/libice 1.0.6-1
X11 Inter-Client Exchange library
local/libid3tag 0.15.1b-4
library for id3 tagging
local/libidl2 0.8.13-1
A front-end for CORBA 2.2 IDL and Netscape's XPIDL
local/libidn 1.16-1
Implementation of the Stringprep, Punycode and IDNA specifications
local/libjpeg 8.0.1-1
Library of JPEG support functions
local/libjpeg6 6b-9
Library of JPEG support functions
local/libldap 2.4.21-1
Lightweight Directory Access Protocol (LDAP) client libraries
local/libmad 0.15.1b-4
A high-quality MPEG audio decoder
local/libmatroska 0.8.1-2
Matroska library
local/libmikmod 3.1.12-3
A portable sound library
local/libmng 1.0.10-3
A collection of routines used to create and manipulate MNG format graphics
files
local/libmodplug 0.8.7-1
A MOD playing library
local/libmp4v2 1.9.1-1
MPEG-4 library
local/libmpcdec 1.2.6-2
Musepack decoding library
local/libmpeg2 0.5.1-1
libmpeg2 is a library for decoding MPEG-1 and MPEG-2 video streams.
local/libmspack 0.0.20060920alpha-1
local/libmtp 1.0.2-1
library implementation of the Media Transfer Protocol
local/libmysqlclient 5.1.45-1
MySQL client libraries
local/libnice 0.0.11-1
An implementation of the IETF's draft ICE (for p2p UDP data streams)
local/libnl 1.1-1
Library for applications dealing with netlink sockets
local/libnotify 0.4.5-1.1
Desktop notification library
local/libogg 1.1.4-1
Ogg bitstream and framing library
local/liboil 0.3.17-1
Library of simple functions that are optimized for various CPUs.
local/libpcap 1.0.0-1 (base)
A system-independent interface for user-level packet capture
local/libpciaccess 0.10.9-1
X11 PCI access library
local/libpng 1.4.1-1
A collection of routines used to create PNG format graphics files
local/libpng12 1.2.40-1
A collection of routines used to create PNG format graphics files
local/libproxy 0.2.3-1
A library that provides automatic proxy configuration management
local/libpurple 2.6.6-1
IM library extracted from Pidgin
local/librpcsecgss 0.19-2
Library for RPCSECGSS support
local/librsvg 2.26.0-2
SAX-based renderer for SVG files into a GdkPixbuf
local/libsasl 2.1.23-2
Cyrus Simple Authentication Service Layer (SASL) library
local/libsexy 0.1.11-2
Doing naughty things to good widgets.
local/libshout 2.2.2-3
Library for accessing a shoutcast/icecast server
local/libsigc++2.0 2.2.4.2-1
Libsigc++ implements a full callback system for use in widget libraries - V2
local/libsm 1.1.1-1
X11 Session Management library
local/libsndfile 1.0.21-1
A C library for reading and writing files containing sampled sound
local/libtasn1 2.4-1
The ASN.1 library used in GNUTLS
local/libthai 0.1.14-1
Thai language support routines
local/libtheora 1.1.1-1
An open video codec developed by the Xiph.org
local/libtiff 3.9.2-2
Library for manipulation of TIFF images
local/libtirpc 0.2.1-1
Transport Independent RPC library (SunRPC replacement)
local/libtool 2.2.6b-2 (base-devel)
A generic library support script
local/libusb 0.1.12-4 (base)
Library to enable user space application programs to communicate with USB
devices
local/libv4l 0.6.4-1
Userspace library for Video 4 Linux (1 and 2)
local/libvdpau 0.4-1
Nvidia VDPAU library
local/libvisual 0.4.0-2
Abstraction library that comes between applications and audio visualisation
plugins
local/libvorbis 1.2.3-1
Vorbis codec library
local/libwmf 0.2.8.4-7
A library for reading vector images in Microsoft's native Windows Metafile
Format (WMF).
local/libwnck 2.28.0-1
Window Navigator Construction Kit
local/libwpd 0.8.14-1
library for importing WordPerfect (tm) documents
local/libx11 1.3.3-1
X11 client-side library
local/libx86 1.1-2
Provides an lrmi interface that works on x86, am64 and alpha
local/libxau 1.0.5-1
X11 authorisation library
local/libxaw 1.0.7-1
X11 Athena Widget library
local/libxcb 1.5-1
X11 client-side library
local/libxcomposite 0.4.1-1
X11 Composite extension library
local/libxcursor 1.1.10-1
X cursor management library
local/libxdamage 1.1.2-1
X11 damaged region extension library
local/libxdmcp 1.0.3-1
X11 Display Manager Control Protocol library
local/libxext 1.1.1-1
X11 miscellaneous extensions library
local/libxfce4menu 4.6.1-1 (xfce4)
a freedesktop.org compliant menu implementation for Xfce
local/libxfce4util 4.6.1-1 (xfce4)
Basic utility non-GUI functions for Xfce
local/libxfcegui4 4.6.3-1 (xfce4)
Various gtk widgets for Xfce
local/libxfixes 4.0.4-1
X11 miscellaneous 'fixes' extension library
local/libxfont 1.4.1-1
X11 font rasterisation library
local/libxfontcache 1.0.5-1
X11 font cache library
local/libxft 2.1.14-1
FreeType-based font drawing library for X
local/libxi 1.3-2
X11 Input extension library
local/libxinerama 1.1-1
X11 Xinerama extension library
local/libxkbfile 1.0.6-1
X11 keyboard file manipulation library
local/libxklavier 4.0-1
High-level API for X Keyboard Extension
local/libxml2 2.7.6-2
XML parsing library, version 2
local/libxmu 1.0.5-1
X11 miscellaneous micro-utility library
local/libxpm 3.5.8-1
X11 pixmap library
local/libxrandr 1.3.0-1
X11 RandR extension library
local/libxrender 0.9.5-1
X Rendering Extension client library
local/libxres 1.0.4-1
X11 Resource extension library
local/libxslt 1.1.26-1
XML stylesheet transformation library
local/libxss 1.2.0-1
X11 Screen Saver extension library
local/libxt 1.0.7-1
X11 toolkit intrinsics library
local/libxtst 1.1.0-1
X11 Testing -- Resource extension library
local/libxv 1.0.5-1
X11 Video extension library
local/libxvmc 1.0.5-1
X11 Video Motion Compensation extension library
local/libxxf86dga 1.1.1-1
X11 Direct Graphics Access extension library
local/libxxf86misc 1.0.2-1
X11 XFree86 miscellaneous extension library
local/libxxf86vm 1.1.0-1
X11 XFree86 video mode extension library
local/licenses 2.5-1 (base)
The standard licenses distribution package
local/links 2.2-3
A text WWW browser, similar to Lynx
local/linux-api-headers 2.6.32.5-2 (base)
Kernel headers sanitized for use in userspace
local/linux-atm 2.5.0-1
Drivers and tools to support ATM networking under Linux.
local/logrotate 3.7.8-1 (base)
Rotates system logs automatically
local/lpsolve 5.5.0.15-1
a Mixed Integer Linear Programming (MILP) solver
local/lua 5.1.4-4
A powerful light-weight programming language designed for extending
applications.
local/lucene 2.9.2-1
A high-performance, full-featured text search engine library written
entirely in Java
local/lvm2 2.02.60-3 (base)
Logical Volume Manager 2 utilities
local/lzo2 2.03-1 (base)
Portable lossless data compression library written in ANSI C
local/m4 1.4.14-1 (base-devel)
m4 macro processor
local/mach64-dri 7.7-1
Mesa DRI drivers for ATI Mach64
local/madwifi 0.9.4.4100-2
Madwifi drivers for Atheros wireless chipsets. For stock arch 2.6 kernel
local/madwifi-utils 0.9.4.4096-1
Userspace tools of madwifi drivers for Atheros wireless chipsets.
local/mailx 8.1.1-7 (base)
A commandline utility for sending email
local/make 3.81-4 (base-devel)
GNU make utility to maintain groups of programs
local/man-db 2.5.7-1 (base)
A utility for reading man pages
local/man-pages 3.24-1 (base)
Linux man pages
local/mcpp 2.7.2-2
Matsui's CPP implementation precisely conformed to standards
local/mdadm 3.1.1-2 (base)
A tool for managing/monitoring Linux md device arrays, also known as
Software RAID
local/meliae-svg-icon-theme 1.2-1
Here you are version n. 1.1 of the new Meliae Icon Theme (all icons are in
SVG format).
local/mesa 7.7-1
Mesa 3-D graphics libraries and include files
local/mga-dri 7.7-1
Mesa DRI drivers for Matrox
local/mkinitcpio 0.6.3-1 (base)
Modular initramfs image creation utility
local/mkinitcpio-busybox 1.15.3-5
base initramfs tools
local/mlocate 0.22.3-1
Faster merging drop-in for slocate
local/mobile-broadband-provider-info 0.20100301-1
Network Management daemon
local/module-init-tools 3.11.1-2 (base)
utilities needed by Linux systems for managing loadable kernel modules
local/mousepad 0.2.16-2 (xfce4)
Simple Text Editor for Xfce4 (based on Gedit)
local/mozilla-common 1.4-1
Common Initialization Profile for Mozilla.org products
local/mpfr 2.4.2-1
multiple-precision floating-point library
local/ms-sys 2.1.4-2
A tool to write Win9x/2k/XP/2k3/Vista/7/2k8 master boot records (mbr) under
linux - RTM!
local/mtools 4.0.13-1
A collection of utilities to access MS-DOS disks
local/nano 2.2.3-1 (base)
Pico editor clone with enhancements
local/ncurses 5.7-2 (base)
System V Release 4.0 curses emulation library
local/ndiswrapper 1.56-1
Module for NDIS (Windows Network Drivers) drivers supplied by vendors. For
stock arch 2.6 kernel.
local/ndiswrapper-utils 1.56-1
Binaries for ndiswrapper module
local/neon 0.28.6-2
HTTP and WebDAV client library with a C interface
local/net-tools 1.60-14 (base)
Configuration tools for Linux networking
local/network-manager-applet 0.8-2
GNOME frontends to NetWorkmanager
local/networkmanager 0.8-1
Network Management daemon
local/nfs-utils 1.2.2-1
Support programs for Network File Systems
local/nfsidmap 0.23-3
Library to help mapping IDs, mainly for NFSv4
local/notification-daemon 0.4.0-4 (gnome)
Notification daemon for the desktop notifications framework
local/nspr 4.8.3-1
Netscape Portable Runtime
local/nss 3.12.4-2
Mozilla Network Security Services
local/ntfs-3g 2010.1.16-1
Stable read and write NTFS driver
local/ntfsprogs 2.0.0-4
NTFS filesystem utilities
local/opencore-amr 0.1.2-1
Open source implementation of the Adaptive Multi Rate (AMR) speech codec
local/openexr 1.6.1-1
openexr library for EXR images
local/openjdk6 6.b17_1.7.1-1
Free Java environment based on OpenJDK 6.0 with IcedTea6 replacing binary
plugs.
local/openntpd 3.9p1-10
Free, easy to use implementation of the Network Time Protocol.
local/openoffice-base 3.2.0-1
OpenOffice.org - a free multiplatform and multilingual office suite -
testing branch leeding to next stable release
local/openssh 5.3p1-4
A Secure SHell server/client
local/openssl 0.9.8m-2
The Open Source toolkit for Secure Sockets Layer and Transport Layer
Security
local/ophcrack 3.3.1-4
A free Windows password cracker based on rainbow tables
local/orage 4.6.1-1 (xfce4)
A simple calendar application with reminders for Xfce
local/orbit2 2.14.17-1
Thin/fast CORBA ORB
local/pacman 3.3.3-1 (base)
A library-based package manager with dependency support
local/pacman-color 3.3.3-1
Command-line frontend for libalpm aka pacman with color patch
local/pacman-mirrorlist 20100131-1 (base)
Arch Linux mirror list for use by pacman
local/pam 1.1.1-1 (base)
PAM (Pluggable Authentication Modules) library
local/pango 1.26.2-1
A library for layout and rendering of text
local/pangomm 2.26.0-1
C++ bindings for pango
local/parted 2.2-1
A program for creating, destroying, resizing, checking and copying
partitions
local/patch 2.6.1-1 (base-devel)
A utility to apply patch files to original sources
local/pciutils 3.1.7-1 (base)
PCI bus configuration space access library and tools
local/pcmciautils 016-1 (base)
Utilities for inserting and removing PCMCIA cards
local/pcre 8.01-1 (base)
A library that implements Perl 5-style regular expressions
local/perl 5.10.1-5 (base)
Practical Extraction and Report Language
local/perl-error 0.17016-1
Perl/CPAN Error module - Error/exception handling in an OO-ish way
local/perl-locale-gettext 1.05-5
Permits access from Perl to the gettext() family of functions.
local/perl-xml-simple 2.18-2
Simple XML parser for perl
local/perlxml 2.36-2
XML::Parser - an XML parser module for perl
local/pidgin 2.6.6-1
Multi-protocol instant messaging client
local/pidgin-facebookchat 1.64-1
Facebook chat plugin for Pidgin and libpurple messengers.
local/pixman 0.16.6-1
Pixman library
local/pkgconfig 0.23-1 (base-devel)
A system for managing library compile/link flags
local/pkgtools 17-1
A collection of scripts for Arch Linux packages
local/pm-utils 1.2.6.1-4
Utilities and scripts for suspend and hibernate power management
local/polkit 0.96-2
Application development toolkit for controlling system-wide privileges
local/polkit-gnome 0.96-3
PolicyKit integration for the GNOME desktop
local/popt 1.15-1 (base)
A commandline option parser
local/postgresql-libs 8.4.2-4
Libraries for use with PostgreSQL
local/ppl 0.10.2-2
A modern library for convex polyhedra and other numerical abstractions.
local/ppp 2.4.5-1 (base)
A daemon which implements the PPP protocol for dial-up networking
local/preload 0.6.4-2
Makes applications run faster by prefetching binaries and shared objects
local/procinfo 19-3 (base)
Displays useful information from /proc
local/procps 3.2.8-1 (base)
Utilities for monitoring your system and processes on your system
local/psmisc 22.10-1 (base)
Miscellaneous procfs tools
local/psutils 1.17-2
A set of postscript utilities
local/pycairo 1.8.8-1
Python bindings for the cairo graphics library
local/pygobject 2.20.0-1
Python bindings for GObject
local/pygtk 2.16.0-2
Python bindings for the GTK widget set
local/python 2.6.5-1
A high-level scripting language
local/python-mpd 0.2.1-2
Python MPD client library
local/qt 4.6.2-1
A cross-platform application and UI framework
local/qwt 5.2.0-2
Qt Widgets for Technical Applications
local/r128-dri 7.7-1
Mesa DRI drivers for ATI Rage128
local/randrproto 1.3.1-1
X11 RandR extension wire protocol
local/raptor 1.4.21-1
A C library that parses RDF/XML/N-Triples into RDF triples
local/rasqal 0.9.19-1
a free C library that handles Resource Description Framework (RDF) query
syntaxes, query construction and query execution returning result bindings
local/readline 6.1.002-1
GNU readline library
local/recode 3.6-3
Converts files between various character sets and usages
local/recordproto 1.14-1
X11 Record extension wire protocol
local/redland 1.0.10-2
Library that provides a high-level interface to RDF data
local/reiserfsprogs 3.6.21-2 (base)
Reiserfs utilities
local/renderproto 0.11-1
X11 Render extension wire protocol
local/rp-pppoe 3.10-4 (base)
Roaring Penguin's Point-to-Point Protocol over Ethernet client
local/rpcbind 0.2.0-1
portmap replacement which supports RPC over various protocols
local/run-parts 3.2.2-1
run scripts or programs in a directory
local/savage-dri 7.7-1
Mesa DRI drivers for S3 Sraphics/VIA Savage
local/saxon 9.2.0.6-1
XSLT 2.0 / XPath 2.0 / XQuery 1.0 processor for Java - the open source Home
Edition
local/scrnsaverproto 1.2.0-1
X11 Screen Saver extension wire protocol
local/sdl 1.2.14-1
A library for portable low-level access to a video framebuffer, audio
output, mouse, and keyboard
local/sdl_gfx 2.0.20-1
SDL Graphic Primitives
local/sdl_image 1.2.10-2
A simple library to load images of various formats as SDL surfaces
local/sdl_mixer 1.2.11-2
A simple multi-channel audio mixer
local/sdl_net 1.2.7-3
A small sample cross-platform networking library
local/sdl_pango 0.1.2-2
Pango SDL binding
local/sdl_perl 2.2.6-3
A Perl wrapper for SDL
local/sdl_ttf 2.0.9-2
A library that allows you to use TrueType fonts in your SDL applications
local/sdparm 1.04-1 (base)
An utility similar to hdparm but for SCSI devices
local/sed 4.2.1-1 (base)
GNU stream editor
local/shadow 4.1.4.2-2 (base)
Shadow password file utilities
local/shared-mime-info 0.71-1
Freedesktop.org Shared MIME Info
local/silc-toolkit 1.1.10-1
Toolkit for Secure Internet Live Conferencing
local/sis-dri 7.7-1
Mesa DRI drivers for SiS
local/smbclient 3.5.1-1
Tools to access a server's filespace and printers via SMB
local/smpeg 0.4.4-5
SDL MPEG Player Library
local/sonata 1.6.2.1-1
Elegant GTK+ music client for MPD
local/speex 1.2rc1-1.1
A free codec for free speech
local/sqlite3 3.6.22-1
A C library that implements an SQL database engine
local/squeeze 0.2.3-2 (xfce4)
Squeeze is a modern and advanced archive manager for the Xfce Desktop
Environment.
local/startup-notification 0.10-1
Monitor and display application startup
local/sudo 1.7.2p5-1
Give certain users the ability to run some commands as root
local/sysfsutils 2.1.0-5 (base)
System Utilities Based on Sysfs
local/syslog-ng 3.0.4-3 (base)
Next-generation syslogd with advanced networking and filtering capabilities
local/sysvinit 2.86-5 (base)
Linux System V Init
local/taglib 1.6.1-1
library for reading and editing the meta-data of several popular audio
formats.
local/talloc 2.0.1-1
talloc is a hierarchical pool based memory allocator with destructors
local/tar 1.23-1 (base)
Utility used to store, backup, and transport files
local/tcp_wrappers 7.6-11 (base)
Monitors and Controls incoming TCP connections
local/tdb 1.2.1-1
A Trivia Database similar to GDBM but allows simultaneous commits
local/tdfx-dri 7.7-1
Mesa DRI drivers for 3dfx
local/terminal 0.4.4-1 (xfce4)
A modern terminal emulator primarly for the Xfce desktop environment
local/texinfo 4.13a-3 (base)
Utilities to work with and produce manuals, ASCII text, and on-line
documentation from a single source file
local/thunar 1.0.1-5 (xfce4)
new modern file manager for Xfce
local/ttf-dejavu 2.30-2
Font family based on the Bitstream Vera Fonts with a wider range of
characters
local/ttf-freefont 20090104-2
A set of free high-quality TrueType fonts covering the UCS character set
local/ttf-ms-fonts 2.0-2
Core TTF Fonts from Microsoft
local/ttf-vista-fonts 1-3
Microsoft Vista True Type Fonts
local/tzdata 2010e-1
Sources for time zone and daylight saving time data
local/udev 151-3 (base)
The userspace dev tools (udev)
local/unixodbc 2.2.14-2
ODBC is an open specification for providing application developers with a
predictable API with which to access Data Sources
local/unzip 6.0-5
Unpacks .zip archives such as those made by PKZIP
local/usbutils 0.86-2 (base)
USB Device Utilities
local/util-linux-ng 2.17.1-1 (base)
Miscellaneous system utilities for Linux
local/vbetool 1.1-1
vbetool uses lrmi in order to run code from the video BIOS
local/vi 050325-3 (base)
The original ex/vi text editor.
local/videoproto 2.3.0-1
X11 Video extension wire protocol
local/vigra 1.6.0-2
Computer vision library
local/vim 7.2.385-1
Vi Improved, a highly configurable, improved version of the vi text editor
local/virtualbox_bin 3.1.4-3
Powerful x86 virtualization (Personal Use Binaries Edition).
local/vlc 1.0.5-5
A multi-platform MPEG, VCD/DVD, and DivX player
local/vte 0.22.5-1
Virtual Terminal Emulator library
local/wget 1.12-1 (base)
A network utility to retrieve files from the Web
local/which 2.20-2 (base)
A utility to show the full path of commands
local/wine 1.1.41-1
A compatibility layer for running Windows programs
local/wireless_tools 29-3
Wireless Tools
local/wpa_supplicant 0.6.10-1 (base)
A utility providing key negotiation for WPA wireless networks
local/x264 20100312-1
free library for encoding H264/AVC video streams
local/xbitmaps 1.1.0-1
X.org Bitmap files
local/xcb-proto 1.6-1
XML-XCB protocol descriptions
local/xcb-util 0.3.6-1
Utility libraries for XC Binding
local/xchat 2.8.6-5
A GTK+ based IRC client
local/xcursor-themes 1.0.2-1
X.org Cursor themes
local/xcursor-vanilla-dmz-aa 0.4-5
Vanilla DMZ AA cursor theme
local/xdg-utils 1.0.2.20100303-1
Command line tools that assist applications with a variety of desktop
integration tasks.
local/xextproto 7.1.1-1
X11 various extension wire protocol
local/xf86-input-evdev 2.3.2-1 (xorg-input-drivers)
X.org evdev input driver
local/xf86-input-synaptics 1.2.1-1 (xorg-input-drivers)
synaptics driver for notebook touchpads
local/xf86-video-apm 1.2.2-2 (xorg-video-drivers)
X.org Alliance ProMotion video driver
local/xf86-video-ark 0.7.2-1 (xorg-video-drivers)
X.org ark video driver
local/xf86-video-ati 6.12.4-3 (xorg-video-drivers)
X.org ati video driver
local/xf86-video-chips 1.2.2-2 (xorg-video-drivers)
X.org Chips and Technologies video driver
local/xf86-video-cirrus 1.3.2-2 (xorg-video-drivers)
X.org Cirrus Logic video driver
local/xf86-video-dummy 0.3.2-2 (xorg-video-drivers)
X.org dummy video driver
local/xf86-video-fbdev 0.4.1-2 (xorg-video-drivers)
X.org framebuffer video driver
local/xf86-video-geode 2.11.6-1 (xorg-video-drivers)
X.org AMD/Geode LX & NX video driver
local/xf86-video-glint 1.2.4-2 (xorg-video-drivers)
X.org GLINT/Permedia video driver
local/xf86-video-i128 1.3.3-2 (xorg-video-drivers)
X.org Number 9 I128 video driver
local/xf86-video-i740 1.3.2-2 (xorg-video-drivers)
X.org Intel i740 video driver
local/xf86-video-intel 2.10.0-1 (xorg-video-drivers)
X.org Intel i810/i830/i915/945G/G965+ video drivers
local/xf86-video-mach64 6.8.2-2 (xorg-video-drivers)
X.org mach64 video driver
local/xf86-video-mga 1.4.11-2 (xorg-video-drivers)
X.org mga video driver
local/xf86-video-neomagic 1.2.4-3 (xorg-video-drivers)
X.org neomagic video driver
local/xf86-video-nv 2.1.17-1 (xorg-video-drivers)
X.org nv video driver
local/xf86-video-r128 6.8.1-2 (xorg-video-drivers)
X.org ati Rage128 video driver
local/xf86-video-radeonhd 1.3.0-1 (xorg-video-drivers)
Experimental Radeon HD video driver for r500 and r600 ATI cards
local/xf86-video-rendition 4.2.3-1 (xorg-video-drivers)
X.org Rendition video driver
local/xf86-video-s3 0.6.3-1 (xorg-video-drivers)
X.org S3 video driver
local/xf86-video-s3virge 1.10.3-1 (xorg-video-drivers)
X.org S3 Virge video driver
local/xf86-video-savage 2.3.1-2 (xorg-video-drivers)
X.org savage video driver
local/xf86-video-siliconmotion 1.7.3-2 (xorg-video-drivers)
X.org siliconmotion video driver
local/xf86-video-sis 0.10.2-3 (xorg-video-drivers)
X.org SiS video driver
local/xf86-video-sisusb 0.9.3-1 (xorg-video-drivers)
X.org SiS USB video driver
local/xf86-video-tdfx 1.4.3-2 (xorg-video-drivers)
X.org tdfx video driver
local/xf86-video-trident 1.3.3-3 (xorg-video-drivers)
X.org Trident video driver
local/xf86-video-tseng 1.2.3-1 (xorg-video-drivers)
X.org tseng video driver
local/xf86-video-v4l 0.2.0-4 (xorg-video-drivers)
X.org v4l video driver
local/xf86-video-vesa 2.2.1-1 (xorg xorg-video-drivers)
X.org vesa video driver
local/xf86-video-vmware 10.16.9-1 (xorg-video-drivers)
X.org vmware video driver
local/xf86-video-voodoo 1.2.3-1 (xorg-video-drivers)
X.org 3dfx Voodoo1/Voodoo2 2D video driver
local/xf86dgaproto 2.1-1
X11 Direct Graphics Access extension wire protocol
local/xf86miscproto 0.9.3-1
X11 XFree86-Miscellaneous extension wire protocol
local/xf86vidmodeproto 2.3-1
X11 Video Mode extension wire protocol
local/xfce-utils 4.6.1-2 (xfce4)
Utilities for Xfce
local/xfce4-appfinder 4.6.1-2 (xfce4)
Xfce application finder
local/xfce4-battery-plugin 0.5.1-2 (xfce4-goodies)
A battery monitor plugin for the Xfce panel
local/xfce4-diskperf-plugin 2.1.0-5 (xfce4-goodies)
Plugin for the Xfce4 panel displaying instant disk/partition performance
local/xfce4-icon-theme 4.4.3-1 (xfce4)
A set of icon themes for the Xfce window manager
local/xfce4-mixer 4.6.1-1 (xfce4)
The volume control plugin for the Xfce panel
local/xfce4-panel 4.6.3-1 (xfce4)
Panel for the Xfce desktop environment
local/xfce4-session 4.6.1-1 (xfce4)
A session manager for Xfce
local/xfce4-settings 4.6.4-1 (xfce4)
Settings manager for xfce
local/xfconf 4.6.1-3 (xfce4)
xfconf.. thingie
local/xfdesktop 4.6.1-1 (xfce4)
A desktop manager for Xfce
local/xfprint 4.6.1-2 (xfce4)
A print dialog and a printer manager for Xfce
local/xfsprogs 3.1.1-1 (base)
XFS filesystem utilities
local/xfwm4 4.6.1-1 (xfce4)
Xfce window manager, compatible with Gnome, Gnome2, KDE2, and KDE3
local/xfwm4-themes 4.6.0-1 (xfce4)
A set of additionnal themes for the Xfce window manager
local/xineramaproto 1.2-1
X11 Xinerama extension wire protocol
local/xkeyboard-config 1.8-1
X keyboard configuration files
local/xorg-apps 7.5-3
Various X.Org applications
local/xorg-docs 1.5-1 (xorg)
X.org documentations
local/xorg-font-utils 7.5-2
X.Org font utilities
local/xorg-fonts-100dpi 1.0.1-3 (xorg)
X.org 100dpi fonts
local/xorg-fonts-75dpi 1.0.1-3 (xorg)
X.org 75dpi fonts
local/xorg-fonts-alias 1.0.2-1
X.org font alias files
local/xorg-fonts-encodings 1.0.3-1
X.org font encoding files
local/xorg-fonts-misc 1.0.1-1
X.org misc fonts
local/xorg-res-utils 1.0.3-3 (xorg)
X.Org X11 resource utilities
local/xorg-server 1.7.5.902-1 (xorg)
X.Org X servers
local/xorg-server-utils 7.5-3 (xorg)
X.Org utilities required by xorg-server
local/xorg-twm 1.0.4-3 (xorg)
Tab Window Manager for the X Window System
local/xorg-utils 7.6-1 (xorg)
Collection of client utilities used to query the X server
local/xorg-xauth 1.0.4-1
X.Org authorization settings program
local/xorg-xinit 1.2.0-1 (xorg)
X.Org initialisation program
local/xorg-xkb-utils 7.5-2
X.org keyboard utilities
local/xproto 7.0.16-1
X11 core wire protocol and auxiliary headers
local/xsel 1.2.0-1
XSel is a command-line program for getting and setting the contents of the X
selection
local/xterm 255-1 (xorg)
X Terminal Emulator
local/xvidcore 1.2.2-1
XviD is an open source MPEG-4 video codec
local/xz-utils 4.999.9beta-2
utils for managing LZMA and XZ compressed files
local/yaourt-git 20100319-1
A pacman wrapper with extended features and AUR support
local/zd1211-firmware 1.4-3
Firmware for the in-kernel26 zd1211rw wireless driver
local/zlib 1.2.4-1
Compression library implementing the deflate compression method found in
gzip and PKZIP
local/zvbi 0.2.33-2
VBI capture and decoding library
Output of lsmod
Module Size Used by
nls_cp437 4513 1
vfat 8348 1
fat 43888 1 vfat
ipv6 237596 22
snd_hda_codec_analog 51443 1
i915 267595 2
drm_kms_helper 21971 1 i915
i2c_i801 7122 0
drm 126556 3 i915,drm_kms_helper
i2c_algo_bit 4219 1 i915
ndiswrapper 172796 0
usbhid 33579 0
hid 61085 1 usbhid
i2c_core 15369 4 i915,i2c_i801,drm,i2c_algo_bit
iTCO_wdt 7577 0
ppdev 4882 0
lp 6616 0
video 14871 1 i915
e1000e 112803 0
ide_pci_generic 2008 0
button 3638 1 i915
iTCO_vendor_support 1453 1 iTCO_wdt
output 1404 1 video
ide_core 76951 1 ide_pci_generic
intel_agp 23225 1
agpgart 23331 2 drm,intel_agp
processor 26526 2
dcdbas 4440 0
thermal 9326 0
sg 21079 0
psmouse 56309 0
serio_raw 3620 0
snd_seq_dummy 1099 0
snd_seq_oss 25304 0
snd_seq_midi_event 4452 1 snd_seq_oss
snd_seq 42628 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 4313 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_hda_intel 18985 0
snd_pcm_oss 33693 0
snd_mixer_oss 14810 1 snd_pcm_oss
snd_hda_codec 56728 2 snd_hda_codec_analog,snd_hda_intel
parport_pc 27680 1
snd_hwdep 5102 1 snd_hda_codec
snd_pcm 57351 3 snd_hda_intel,snd_pcm_oss,snd_hda_codec
parport 26575 3 ppdev,lp,parport_pc
snd_timer 16117 2 snd_seq,snd_pcm
pcspkr 1347 0
evdev 6970 8
snd 43847 11 snd_hda_codec_analog,snd_seq_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 5007 1 snd
snd_page_alloc 5841 2 snd_hda_intel,snd_pcm
loop 11399 0
rtc_cmos 7504 0
rtc_core 12011 1 rtc_cmos
rtc_lib 1450 1 rtc_core
ext2 56463 1
mbcache 4278 1 ext2
sr_mod 13161 0
cdrom 31625 1 sr_mod
sd_mod 24101 3
usb_storage 34006 2
pata_acpi 2264 0
ata_generic 2235 0
ata_piix 17725 0
uhci_hcd 19156 0
libata 135579 3 pata_acpi,ata_generic,ata_piix
scsi_mod 78933 5 sg,sr_mod,sd_mod,usb_storage,libata
ehci_hcd 31594 0
usbcore 118921 6 ndiswrapper,usbhid,usb_storage,uhci_hcd,ehci_hcd -
Error in scenario "FILE to HTTP(with SSL)" - HTTP client code 110 reason.
Hi friends,
Our scenario is as follows:
We are trying to send XML file from our SAP-XI to external tool "COMMunix XC" (a multi-protocol EDI platform tool).
We have configured " FILE TO HTTP(with SSL)" scenario (trying to connect HTTPS/port)
1. We have created RFC destination of type G and refered the same RFC in Communication channel (Adapter type: HTTP)
2. We have send the SSL Server certificate to other party and ensure that they have imported at thier end.
3. We have included the certificates from other party in our SAP XI STRUST under SSL Client (Standard) node.
4. We have tried " CONNECTION TEST " in the RFC destination created in type G (in STEP 1) and it shows the GREEN TICK at bottom, no other message nor any error message
When we trigger the communication we recieve the error: HTTP client code 110 reason in SXMB_MONI.
Please let us know if we have missed out some step.
What does error message indicate,
Regards,
RehanHi Rehan,
I see that the PROCTIMEOUT was already at a very high value.
Does this occur for messages of a particularly large size? If yes, you could increase the parameter
icm/HTTP/max_request_size_KB = 2097152
This would need to be done in the sender/receiver system as well as XI.
Otherwise you could try reproducing the issue and checking the dev_icm log in the work directory, or go to SMICM -> Goto -> Display trace file
check for errors like NIECONN_REFUSED or "no service for protocol HTTPS" which can often be related to this type of issue.
Kind regards,
Sarah -
Why doesn't smpatch analyze match patchdiag output?
Can someone explain this and if it will change in the future. If so, when ca we expect it?
First, I understand that the patchdiag.xref file is commonly more current than patchdb.zip (by a day) but that's not what I am talking about.
I see across most hosts and OS versions patches that aren't flagged for update by smpatch analyze but are by patchdiag. Many are obviously important files (not obscure), a good example I have seen on other boxes are the SUNWsan patches, sd patches, etc.
Below is an example from a Solaris 10 box.
# smpatch analyze
No patches required.
# ./patchdiag -l | grep "^1" | grep -v CURR | grep -v Obsol
113886 27 32 OpenGL 1.3: OpenGL Patch for Solaris (32-bit)
113887 27 32 OpenGL 1.3: OpenGL Patch for Solaris (64-bit)
116298 08 17 Sun One Application Server 7.0: Java API for XML Parsing 1.2 Patch
116302 02
119073 02 03 SunOS 5.10: ldapclient patch
119115 13 14 Mozilla 1.7 patch
119130 06 13 SunOS 5.10: Sun Fibre Channel Device Drivers
119313 03 04 SunOS 5.10: WBEM Patch
119366 04 05 GNOME 2.6.0: Display Manager Patch
119370 08 09 GNOME 2.6.0: GNOME panel and support libraries Patch
119548 02 03 GNOME 2.6.0: Gnome Multi-protocol instant messaging client Patch
119687 01 02 SunOS 5.10: in.mpathd patch
119982 01 03 SunOS 5.10: ufsboot patch
120469 02 03 SunOS 5.10: kerberos patch
118666 S SUNWj5cfg 04 43 J2SE 5.0: update 5 patch
118667 S SUNWj5dmx 04 43 J2SE 5.0: update 5 patch, 64bit
118676 SUNWsprot 01 239 SunOS 5.10: patch for Solaris make and sccs utilities
118683 SUNWsprot 01 190 SunOS 5.10: Patch for assembler
119213 * SUNWjss 06 57 SunOS 5.10: NSPR 4.5.2 / NSS 3.10.1 / JSS 4.1
119586 SUNWcpcu 02 2 SunOS 5.10: pcbe Patch
119963 SUNWlibC 04 8 SunOS 5.10: Shared library patch for C++
119974 SUNWcfpl 02 64 SunOS 5.10: fp plug-in for cfgadm
120195 SUNWcakr 01 142 SunOS 5.10: schpc sc_gptwocfg gptwo_pci patch
120201 SUNWxorg-clientlibs 01 143 X11 6.8.0: Xorg client libraries patch
120338 SUNWkiu8 04 93 SunOS 5.10: Asian CCK locales patch
120560 SUNWxwpl 01 93 SunOS 5.10: sun4u platform links patch
120706 SUNWxildh 01 57 SunOS 5.10: XIL 1.4.2 Loadable Pipeline Libraries
120753 SUNWlibm 02 8 SunOS 5.10: Microtasking libraries (libmtsk) patch
120998 SUNWhea 01 3 SunOS 5.10: sd headers patch
121211 SUNWmcon 01 3 SunOS 5.10: Sun Java Web Console (Lockhart) Patch
#Here's some output from today.
new install Solaris 10 3/05
applied rec patch cluster, then smpatch update to current
# smpatch analyze
No patches required.
patchdb.zip:
93 11-30-05 22:05 patchlist.properties
1623621 12-01-05 00:15 patchlist.delimited
patchdiag.xref header:
## PATCHDIAG TOOL CROSS-REFERENCE FILE AS OF Dec/12/05 ##
Patchdiag output showing full info (current rev, needed, etc)
# ./patchdiag -l | grep "^1" | grep -v CURR | grep -v Obsol
113886 27 32 OpenGL 1.3: OpenGL Patch for Solaris (32-bit)
113887 27 32 OpenGL 1.3: OpenGL Patch for Solaris (64-bit)
116298 08 17 Sun One Application Server 7.0: Java API for XML Parsing 1.2 Patch
116302 02
117461 06 08 SunOS 5.10: ld Patch
118707 03 04 SunOS 5.10: Expert3D IFB Graphics Patch
119073 02 03 SunOS 5.10: ldapclient patch
119115 13 14 Mozilla 1.7 patch
119313 03 04 SunOS 5.10: WBEM Patch
119366 04 05 GNOME 2.6.0: Display Manager Patch
119370 08 09 GNOME 2.6.0: GNOME panel and support libraries Patch
119414 02 03 GNOME 2.6.0: Gnome Accessibility Libraries Patch
119548 02 03 GNOME 2.6.0: Gnome Multi-protocol instant messaging client Patch
119598 03 04 GNOME 2.6.0: Gnome Screen Reader and Magnifier Patch
119681 03 05 SunOS 5.10: patch platform/sun4u/wanboot
119687 01 02 SunOS 5.10: in.mpathd patch
119712 01 02 SunOS 5.10: usr/sbin/in.routed Patch
119982 01 03 SunOS 5.10: ufsboot patch
120133 02 03 GNOME 2.6.0: Gnome themes Patch
120469 02 03 SunOS 5.10: kerberos patch
120887 01 02 SunOS 5.10: cdrw patch
118666 S SUNWj5cfg 04 48 J2SE 5.0: update 5 patch
118667 S SUNWj5dmx 04 48 J2SE 5.0: update 5 patch, 64bit
118676 SUNWsprot 01 244 SunOS 5.10: patch for Solaris make and sccs utilities
118683 SUNWsprot 01 195 SunOS 5.10: Patch for assembler
119213 * SUNWjss 06 62 SunOS 5.10: NSPR 4.5.2 / NSS 3.10.1 / JSS 4.1
119586 FJSVcpcu 02 7 SunOS 5.10: pcbe Patch
119728 FJSVfmd 02 187 SunOS 5.10: FJSV,GPUU platform fmd.conf patch
119963 SUNWlibC 04 13 SunOS 5.10: Shared library patch for C++
119974 SUNWcfpl 02 69 SunOS 5.10: fp plug-in for cfgadm
120195 SUNWcakr 01 147 SunOS 5.10: schpc sc_gptwocfg gptwo_pci patch
120201 SUNWxorg-clientlibs 01 148 X11 6.8.0: Xorg client libraries patch
120338 SUNWkiu8 04 98 SunOS 5.10: Asian CCK locales patch
120560 SUNWxwpl 01 98 SunOS 5.10: sun4u platform links patch
120706 SUNWxildh 01 62 SunOS 5.10: XIL 1.4.2 Loadable Pipeline Libraries
120753 SUNWlibm 02 13 SunOS 5.10: Microtasking libraries (libmtsk) patch
120998 SUNWhea 02 5 SunOS 5.10: sd headers
121104 S SUNWacroread 01 1 Adobe Acrobat Reader patch
121136 S SUNWacroread-plugin 01 1 Adobe Acrobat Reader patch
121211 SUNWmcon 01 8 SunOS 5.10: Sun Java Web Console (Lockhart) Patch
Obviously a difference in reference file dates, but not sure if these patchdiag patches are since the patchdb dates. I'll leave that to you all to research.
Hope this ouput helps. JB -
Finding printer's IP address on Appletalk Network
I'm trying to install RIP software for my Fuji Pictrography printer which is on a wired ethernet appletalk network with a switch. in order for the RIP sofware to work I need to find the printer's IP address. How do I find this information?
davidThis is description of the Network Adaptor;
The Fuji Pictrography Network Adapter (PNA) connects Pictrography 3500, 4000-II and 4500 printers to an Ethernet Network to provide network-wide photo printing. Compact Multi-protocol adapter supports TCP/IP and Apple Talk Protocols. Connections: 10/100Base-T/X - auto negotiation. Supports Windows 95/98/2000/NTv4, XP and Mac OS9 and 10.3x. (Not compatible with Fuji Print Suite or Fuji 3000).
david
Maybe you are looking for
-
Exporting to QT produces garbage video
I am at a complete loss. I export to QT self-playing movie (CD-ROM Movie, Medium), set the duration and build duration and all seems to work. When I play back the movie in QT, the duration of Slide 1 is correct, Slide 2 has a shorter duration than se
-
3.1 IRR download CSV behaves different than 3.0.1 CSV download
I am generating some links dynamically in the select statements for some of my reports (i.e. select decode(REGULAR_EXPRESSION_KEY, null,'-NO RE-', "a href="f?p=&APP_ID.:2:... ) Note: I changed the example a bit so that it would display and not be int
-
Question about repeating in the process chain
Hello Gurus, my DTP is set as "valid records update, no reporting (request red)", and put into a process chain. the process chain goes wrong on this DTP due to some erroneous records. my questions are: (1) based on DTP configuration, all
-
CONVT_CODEPAGE codepage '4110' to codepage '4103'
Hi Experts, I'm really new with ABAP and I'm trying to ivestigate as to why a job got cancelled previously. As per DUMP information: Short text A character set conversion
-
Generic and Master data delta.
HI, Will you please give me the solution for 'The differenet delats we have in generic delta,what actually is a numeric pointer.. how does it pick delat..is it something like it picks a record which has changes in it or it it each neew record.. if