Multibridge Pro to Mac Pro

is possible connect a Multibridge Pro to Mac Pro?

You'd best be asking the manufacturers but according to this web site, http://www.markertek.com/Computer-Related/PCI-Cards/Blackmagic-Design/MULTIBRIDG E-PRO-2.xhtml
yes.

Similar Messages

Can't Get MacBook Pro and Mac Pro to Network

I have a MacBook Pro (2008 - 2.5 Ghz. Core 2 Duo with 4 Gb of RAM running OS X 10.6.7) that I have been connecting to my Mac Pro (2005 - 2 2.66 Ghz Xeon with 20 Gb of RAM running OS X 10.6.7) through an Ethernet switch on my school's network. This has worked without a hitch for years, but when I upgraded to 10.6.7 recently, the MacBook and Mac Pro fail to network. On the MacBook Pro, the Mac Pro's icon doesn't show in the shared area, and on the Mac Pro, I can see the icon for the MacBook Pro, but when I click on the icon to connect, I get the message that "Connection Failed There was an error connecting to the server (name of my MacBook Pro). Check the server name or IP address, and then try again." I have tried a direct connect using the "Connect to Server" under the Go menu on both machines, using their IP addresses, but no luck. Is there something I need to re-set to get these two to talk again? I have other Macs on the same network that my MacBook and my Mac Pro can see, and both machines can connect to them. They just can't connect to each other.
Thanks in advance for any ideas you might have on how to fix this.

I fixed the problem by re-setting the default values for my VirusBarrier X6 anti-virus program.

Windows 8.1 Pro on Mac pro resolution problem

I have created a partition for windows 8.1 pro on my 13' retina display mac pro via boot camp, everything is fine except the resolution, when i open the browser, i could see pixels, the words aren't very sharp, but this isn't my biggest problem, when i open the Solidworks software i'm working on, the icons are too small, or the texts are too big for their boxes. what is happening here? anyone knows what is all about, or how to fix this? changing the resolution of the display didn't solve the problem.

This is how the words look like in the browser page, you could see pixels. The maximum resolution for this machine is 2560*1600

How do I use the App store with macbook pro and mac pro

I currently use the app store with the mac book, but want to buy (share?) apps and music with the mac pro.
I can't find anything that specifically outlines how this works.
I use SplashID with the macbook and an iPhone, and want to use it (and sync it) on the mac pro as well.
If you buy apps for a macbook, can you use them on a second machine, or do you need to buy it a second time?

Your license from the MAS allows you to download and install the apps on as many Macs as you own or have under your control (institutional or employer supplied Macs.) The Mac should to be running Mac OS X 10.6.8 Snow Leopard or Mac OS X 10.7.2 Lion. Open the MAS app on the Mac Pro and sign into your account to have access to download all of your previous purchases in the Purchased pane.
Simple apps can also be dragged & dropped over a network connection from the MacBook to the Mac Pro.

I am trying to setup iCal syncing with Mobile Me on Mac Pro and Mac Pro Notebook. I have accounts added in for MobileMe and Gmail. Problem is that iCal does not appear as one of the Sync choices in the MobileMe sync window on either computer?

I am trying to sync iCal with all my computers and devices via MobileMe. I cannot sync iCal on my Mac Pro nor Mackbook Pro. I believe accounts to be setup properly BUT on both computers there is NO choice to select iCal among the choices in "Sync Menu" on the MobileMe window in System Preferences. Help?

Greetings,
If you delete individual messages they will be deleted from other accounts.
If you setup the accounts as IMAP (which is the default for MobileMe accounts) you can remove the accounts and the other users will still have the email.
Alternatively if you don't want to see the account in the other user go to Mail > Preferences > Accounts > MobileMe account > Advanced > remove the check mark for "enable account". This leaves the account and just turns it off so you don't see it and it doesn't send / receive messages.
Finally, you should be backing up your data for safekeeping so even if you did delete the account and the messages magically vanished you could restore them: http://support.apple.com/kb/HT1553
Hope that helps.

Why does my MacBook Pro and Mac Pro keep freezing?

Why does my MacBook Pro freeze?
MacBook Pro
2.4 GHz intel Core2 Duo
4BB 1067 MHz DDR3
OSX 10.6.8 Snow Leopard
I turned it on and I went to safari to look things up. Safari froze and then the whole thing became unresponsive - the mouse could move the cursor but it couldn't open any programmes.
Tried safe boot several times. No help.
Tried to repair disc permissions. The first time it got a little way then said 'user stopped repair' or something - though I didn't touch it. Tried again it got all the way through and said 'repairs complete'. But no help.
Couldn't clear cache etc as couldn't get to the relevant part to do it.
Opened in single user mode. Ran the fsck -fy thing twice. First time it said both “The volume appears to be OK” AND “FILE SYSTEM WAS MODIFIED.” In 2nd run it just said “The volume appears to be OK”. No help.
Booted it up from the Superduper bootable backup version on a USB external drive. It seemed to boot up ok but then tried to click on something and the same thing happened - spinning beach ball and it just hung.
Erased hard drive and reinstalled snow leopard but it just does the same thing. Suggesting a hardware issue not software but...the Eerie thing is, we tried backup version on boyfriends Mac Pro and it worked fine on there but 24hrs later his Mac Pro has got exactly the same screen freezing, unresponsive issue. Could this suggest there's something evil lurking on my back up? Can't get an appointment at Genius Bar until next week and need to get some work done, so hoping someone might have some ideas?
Cheers
Kerry

KaiDonald wrote:
... does Apple products work much better with using Apple routers?
While a genuine Apple router is likely to result in success, the reason for having one instead of another product is that it eliminates a lot of uncertainty. For example, we do not know the model D-Link product you have so no one is in position to speculate what the problem might be. Also, it makes support on this forum easier since there are only three AirPort models to choose from and they all work more or less the same.
Generally speaking your iPods, iPads, MacBooks, and AppleTV ought to work with any router though, provided it is fairly recent and meets accepted industry standards. If in doubt you can purchase an AirPort Base Station, which comes with 90 days of free telephone support. If it does not result in any improvement for you, you can always return it for a complete refund. The return period is 14 days and be sure to keep all material - receipt, box, manuals, etc...
If you elect this option be sure to follow its installation instructions, the most important of which is to power down your modem prior to connecting the AirPort Extreme, Express, or Time Capsule. All your other equipment will need their network settings adjusted to "forget" the D-Link network and connect to the new one.

Can't Connect MacBook Pro and Mac Pro

I have a MacBook Pro (pre 2008 - dual core) running OS X 10.6.7 and I regularly connect it to the Mac Pro at my work (also running OS X 10.6.7). I've had no problems until recently. Now, when I try to connect, I get the following message:
"The server "name of my MacBook Pro" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
Sometimes I click the icon to connect, the computer tries for a minute or so to connect, then it disappears from the shared list.
This happens whether I try to connect from either computer to the other one.
Ideas? Suggestions?
This is frustrating.

I'm still having problems with connecting my MacBook Pro with my Mac Pro. Both are running Snow Leopard (10.6.7). I have tried repairing permissions and toggling settings in my Sharing, but no luck. I'm still getting "The server "name of my MacBook Pro" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
Anyone have any other suggestions?

Final cut pro make Mac pro kernel panic with RAM from other manufacturers

hi all
if i installed RAM For mac Pro from 667MHz DDR2 fully buffered ECC RAM from other manufacturers
final cut pro (just final cut)
make the machine kernel panic messege
all programs working good (like adobe and other compositing program) but final cut freez the machine and kernel panic
the standard RAMs good

Ahmed:
You can try visiting/searching the Expanding your Power Mac G5 forum. You'll find A LOT of help about RAM issues.
Any RAM brand must work but you maust be sure it follows the MAc specs. Some brand sites have good product locator by computer manufacturer/model (i.e. Kingston and Crucial). In fact there is no Apple branded RAM, they use a lot of different ones.
Inside FCP settings you'll find how to manage the memory that the program use, but that settings depends on the total quantity of memory you have installed, and you didn't post that information.
Alberto

Unable to install final cut pro on mac pro computer

Hello,
I started to use my new MacPro (Please see specs. at bottom of Page) and tried to install Final Cut Studio but never succeeded. I never can go beyond disk “apple loops for soundtrack pro.” the application “installer” quits unexpectedly each time. Does anyone has had the same problem? I would truly appreciate any help on this matter.
Thank you,
sandrine
SPECS:
Mac Pro - OS10.4.8
Machine Model: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 2 GB
Bus Speed: 1.33 GHz
MAC PRO Mac OS X (10.4.8)

You'll be needing the univeral version of FCP (FCP
5.1) to install it for starters.
Might clean the disks... if that fails and you do
have the Unversal version, Call Apple. Could have a
bad disk, and new install issues over the phone
support are free. 1-800-myapple.
Jerry
Jerry,
I thank you very much for your help. i will follow your advice and get the 5.1 universal version. do you know if i need to uninstall the version (final cut pro 5) that is on my computer.
agaim, thank you
sandrine
MAC PRO Mac OS X (10.4.8)
MAC PRO Mac OS X (10.4.8)

Performance on a MacBook Pro v Mac Pro - export to Media Browser

Right now I am using a Macbook Pro (an older Core Duo 2.16 w/2GB) -
I am wondering with one of the new Mac Pros (8-core), do I gain an advantage during tasks like exporting my movies (say 300MB+ in size) to the Media Browser? And how much of the advantage, if any, comes from greater RAM?
And also the subsequent export from Garage Band (after I have added chapters) and export the movie to disk?
Just wondering if these are types of tasks that will benefit greatly from a newer machine and my times will be reduced. I'm doing a lot of waiting now...
Thanks-

My GPU is the X1900, not sure how that fits in with the current MP options, it's likely been surpassed by now, I've had my MP for quite a while now. I tend to only take any interest in GPU's when it's time to buy a new mac.
I don't know about you but importing is the bit that I seem to end up getting impatient about, when it comes to exporting I tend to take the approach that my work is done and I usually go and do something else.
Of course importing DV is realtime whichever mac you have, importing AVCHD takes about 1/2 real time on my MP, I can't say I've ever imported AVCHD on my MBP.
Of course any rendering imovie needs to do is largely on the fly and doesn't get noticed on my MP, rendering in final cut is pretty quick, I've never actually timed it, it doesn't take long enough to start worrying about. Sometimes I get an opportunity to clean my glasses during a render, not very technical but hopefully gives you an idea of the sort of times we are talking about.
I'm unable to export 1080i video from my MBP (and it actually be 1080i), I can do this with my MP.
In summary. I don't use my MBP for editing, I've done a few tests and things on it but that's about it. I don't think I would have the patience to edit video on it knowing that my MP is there. I guess this about sums up the difference between the two macs in a nutshell.
Message was edited by: Winston Churchill

Macbook Pro or Mac Pro

I'm considering buying a computer for my home studio. I'm currently typing this message on my new iMac with 4G of Ram. I've installed Logic 8 and a few other plug-ins (namely NI Komplete 5).
I know that Ram is essential...and hard drives. My concern of going with a MacBook Pro would be the the amount of samples I would be able to use at the same time (with accessing the same drive all at once).
Mac Pro is a monster...but I do like the fact that I could pick up a Macbook Pro and "just go"...along with a midi controller.
Any help or suggestion would be much appreciated.
I've experimented with my friend's Macbook (2G of Ram) and with a Firewire external HHD. Not as smooth as my new iMac...to say the least.
Patrick

Hang on - just so we understand, what is wrong with using your imac? Those things are great for logic.
If there's another reason you're thinking of getting a new computer - get the mac pro, or the macbook pro with a 30 inch screen.
You will be unhappy with the MBP screen size (I'm speaking as a KOMPLETE user also here) unless you get a big screen.
I just got the new 2.8 mac pro with 30 inch screen - using reason and KOMPLETE also - best rig I've ever owned.

Mac book pro or Mac pro

Ok, I'm looking at upgrading and all that fun stuff. I would like to get everyones opinion on if I should go with a MBP or a MP.
I'm torn, half of me wants the beast of a MP but the other half would like the portablity of the MBP. I use FCE3.5, most of the videos I work with do require alot of rendering since they aren't a native size. I also watch TV on my current machine using EyeTV.
FCE is my main application.
I know MP has better specs than the MBP.
Whats your opinion!

Hi(Bonjour)!
As a general rules:
-notebooks are less performant than desktop model.
-they cost more than a comparable (read: in performance term)desktop model.
-notebooks are more fragile than desktop model.
-they are almost impossible to upgrade on the hardware side.
-you can't use second internal hard drive dedicated to video editing process.
-Mac Pros are professional machine aimed to do large and demanding jobs.
-you can pack them with many hard drives, many RAM, upgrade the video card.
Yes, your first half want the portability and cool geek factor to own a mac to go, but your second half, the creative one, will do prefer the desktop model.
May be you can buy the cheapest Mac Pro with 2Go Ram and by a macbook on the refurb store (for the cool factor).
Michel Boissonneault

Mac book Pro or mac pro for pro photgraphy

i need a new mac for photo editing and i need to know if I would be best served by the most powerful configuration of Mac Book Pro with retina display or by a Mac Pro medium config (maybe it is a little overkill).
For photography on Photoshop, Lightroom and Apperture what is most important?
The processor, the RAM or the Graphics Card?
Thankyou.

All of them and the fast storage as well, though first priority is RAM, I suppose.

Final Cut Pro 3-Mac Pro 3.2 Xeon

I'm trying to install my copy of FCP 3 onto my Mac Pro 3.2, and every time I try to launch it gives me the error "Final Cut Pro" requires a System ID file which is missing or Invalid. Please reinstall using the original CD that was used to install Final Cut Pro." I have done this several times, and re-booted, and the same error comes up. I want to but the upgrade to FCP STudio 2, but I want to find out what is happening with this first. Thanks.
Brad

Thank you very much Jim. I suspected that was the case. I assume there is no problem buying the upgrade version ($699) as opposed to the full version ($1299). I have never launched FCP 3 on this machine, so I have never been able to enter the Serial Number. Just wanted to make sure before I spent the money. Again, thanks.

Home Network - MB Pro/PC/Mac Pro - Can't see an internal Mac Pro Drive

Hi folks... I'm the MacBook Pro user in the house.
3 drives in the Mac Pro - One is FAT32 formatted.
It has all the shared movies/music for the house on it (PC user also uses it)
I can't access the internal FAT32 drive from my macbook pro... all on leopard, no probs in seeing the other 2 drives on the mac pro.
any solutions?

Hmm.
Can the PC see the drive?
Is the Mac Pro running Leopard?
~Lyssa

Multibridge Pro to Mac Pro

Similar Messages

Maybe you are looking for