Multiclip editing: applying filter to a certain angle

Hello to all!
I have my multiclip sequence. It is made up of angle A and angle B. I've already finished to edit it. Now I want to apply a filter (let's say a color match filter) to angle A. I want this change to propagate to all A angles in my multiclip. How can I do this? If I apply the filter to angle A, I can see it in the viewer, but nothing change in my multiclip...
Thanks in advance!
D.

Once the clips are moved to the timeline they become somewhat independent from the master clip. To apply a filter to an entire angle (in an existing sequence), select the first occurrence and apply the filter to it. Copy the clip then select all other occurrences of that angle in that sequence (command click each one) then select paste attributes and tick filters.
It's a bit of a chore and can cause problems if there are already filters applied to the first clip. If this is the case turn off the other filters before you copy the clip (then reactivate them), they will copy over but will not be active. Existing filters will not be erased when you paste attributes as it adds to the existing filters.
Hope this helps.

Similar Messages

Multiclip editing does not update Canvas window with active angle

Hi,
I am trying to do some multiclip editing but for some reason when cutting between angles the canvas viewer does not update with the video. Once I stop playback the cuts are all created properly and the video changes when playing back again. However, when editing the video does not change to the active angle. The audio changes but the video does not.
I have the multiclip playback setting in RT enabled and the canvas and viewer windows synced and matching each other when playing back, and video + audio is set in the sync menu.
I'm now stuck! and would greatly appreciate some help.
Thanks
Phil

Welcome to the family.
I don't mean to brush you off because I understand your frustration. But what we know about mutliclip is that it really does work, if you follow the rules completely. We also know that most of the "multiclip doesn't work" posts are resolved by encouraging the user to be objective and to simply recheck the setup steps in the manual, one at a time. (Editorially speaking: There are too many of them, there are too many stupid gotchas in the multiclip setup. True. Hope springs eternal that FCP6 may fix many of these things. It should be a one-click solution.)
You can search for multiclip here and, after filtering out the nonsense from elitists like me, you should be able to detect something in your configuration that might be keeping you from getting the performance you are expecting.
bogiesan

Tagging/Favorite certain angle of Multicam Clip?

Is there a way to TAG or FAVORITE a certain angle of a multiclip? It appears that all tagging and favoriting will apply to multiclip as a whole, with no indication of which angle the tag was intended to apply to.
I want to mark certain sections of certain angles of a multiclip to favorite so I remember to use them in the edit, but there doesn't seem to be a way.
Sadly, when you multiclip two clips it doesn't seem to take the tagging/favoriting with it, so i can't tag previous to making the multicam clip because all that stuff disappears.
I sort of found a workaround for the favoriting part. I simply make a favorite in the multiclip then rename "Favorite" to include the angle number I am referring to.
But I can't do that same workaround for tagging.
Am I missing something?

You coulld use markers and make notes.
Russ

Webcam on Envy 14 Beats only detects when the display is at a certain angle

HP Envy 14t-1100 CTO beats edition
Windows 7 64
"No webcam detected" using HP MediaSmart Webcam, webcam not showing under imaging devices in device manager
I've had my Envy 14 Beats for about 9 months, when I got it the webcam worked just fine. A few months ago I started noticing that when I tilted the display forwad or backward I would hear the alert noise for when a usb device is unplugged, at the time I didn't think much of it.
Just recently I went to use my webcam with the MediaSmart app and got the error message "No WebCam detected, try plugging in your webcam... yada yada." So I went to the device manager to see if there was a driver issue, to my surprise there was no "Imaging device" category. I scanned for new hardware, nothing turned up. While re-adjusting my sitting position on the couch I tilted the display screen slightly forward, and to my surprise the device manager list refreshed and suddenly the "Imaging Device" category was there with the webcam listed. I let go of the display (I was applying a small amount of pressure tilting it forward) and the usb disconnect noise beeped and the webcam disappeared from the device manager...
After a little more pushing and prodding I was able to reproduce the effect. If I have the display at a slightly larger then 90 degree angle (100 degrees-ish) and then put a little pressure on the display tilting towards me (going from ~100 degrees to ~97) the webcam will show up in the device manager and works like there's nothing wrong. If I let go of the display and let it sit open unassisted I get the disconnect system noise and the webcam and imaging device categor disappear from the device manager. I'm guessing there's a loose connection in the wiring that connects the display screen to the main body of the laptop.
My question, then, is what can I do about it? Obviously me holding the display in order to use my webcam doesn't fly, but am I going to have to send in my laptop for repair? I bought the laptop in early december of 2010 so it's still under warrenty. If I do have to send it in, will they wipe my hdd?
Any ideas or suggestions would be very appreciated, I know this is a wierd one, but that's just my luck I suppose.
Thanks!
-Jake

I have the exact same problem. And I went through it twice. The first time I had this problem, I tried to work around by tilting the display to a certain angle, but eventually the webcam stopped getting recognized and after talking to the customer care and trying system restore and even factory reset, I had to send the laptop for warranty repair. This time I noticed the problem while using Skype or Google video chat. Whenever my video is on i.e. the webcam is working, my microphone picks up a loud noise which goes away when I switch off the video. I got the same effect in HP MediaSmart webcam program too. After a couple of month like this my webcam eventually has stopped getting recognized again.
Calling customer care would only result in suggestions of system restore/ factory reset when I know that the problem is in hardware. I believe the webcam connection is very weak to handle the display tilting. I have searched the web and have fond many similar problem reported by users.
I paid a premium for this laptop a year ago and I am surprised to find the same problem getting reported even now! Hope HP works on remedying this shoddy piece of design!

Some techni of Multiclip edit

I am a multiclip edit beginner and I'd like to know somethings below.
1. I have a 3 camera live event project, but I realized that the white balance and the brightness of those 3 cam do not match. Is it possible for me to change specified camera settings after I create into multiclip already? Or I need to fix them before combined? I've tried to fix it after make them into multiclip,(for example, just put the color corrections effect to the viewer window), it showed the effect changes on the active camera at first, but when I switched to other angles and back to it, the filter disappeared. Is it some other methods can do it properly?
2. Is it possible to add dissolve transition automatically when I cut to other angle? (You know, just like we are using visual mixer in live event)
Thank you for your answers.

1. CC in the viewer will not help you.
You can CC before making the multiclip, but I think i's beter to just edit and then Color Correct the first shot from let's say angle 2 and then copy those settings to all other shots from that camera. Because you'll probably need to adjust every shot a little anyway...
2. I'm not sure if this works for Multiclips, but normally you can jsut edit.
Then make sure your Default Dissolve has the settings you want. Then select a the clips in the timeline. Set an inpoint at the first selected clip. Drag those clips to the right part of the canvaswindow and release the mouse button when your are over Overwrite with Transition...
Again: Not sure if this works for multicam edits...
Rienk

Adding effect to angles after multiclip edit

i have just completed a 3 camera multiclip edit and now need to copy the colour correction setteings for one angle throughout the project. I have colour correct one clip and then copied it, i have gone to edit>find, typed in the name of the angle and asked to find all. When all the clips are highlighted i proceed with option V to paste the effect to all highlighted angles, yet this does not seem to work.
am i doing things in the correct order or am i missing something
Thanks
Matthew

if you can't make pasting work then drag the CC effect you want from the filters tab and save it in a bin. Then select the angles you want to apply and while they are still selected drag the saved fx from the bin onto the clips in the timeline.

Few values of report column do not display in report while applying filter

Post Author: anuragg11
CA Forum: WebIntelligence Reporting
There are 6 drill filters applied on the report to filter out the report column data. Few values of the report are not displaying in the report when using drill filter. Same issue is with report filter too. If filters are removed then values are appearing in the report. We are using version BO XI R2 & Java runtime JRE 1.4v. It doesn't look issue is with Java version because only few specific data of the report column are not shown in the report when using filter on the data. Example: One of Report data column contains below values: 24.2, 26.9, 120.1, 230, 274.9, 275.8, 333.2 Report is displaying all these values when there is no filter on any data. But report doesn't display data when applying filter on 274.9 or 120.1 howver filter on other values 24.2, 26.9, 230, 275.8, 333.2 are working fine.

Hello,
I think i know what your problem is.
Although in table view your 2 requests combine perfectly and show separate results in pivot view BI unfortunaterly adds them up.
One work around would be to go in your criteria add in each request a dummy column. This can be obtained the following way:
1. click on a column to add it in the criteria (it doesnt matter which one)
2. go into the edit formula of that column
3. delete the formula and in its place write 'Dummy Column 1'
Do the same for the second request by adding a "Dummy Column 2'
Now the Pivot Table should also show up correctly
Let me know if it goes well or if you have any further questions,
Kostis

Selecting a column in Answers report based on user prompt/ apply filter

I need to do the following in OBIEE Answers report (version 10.1.3.4.1):
1) Think of a simple table with dim TX_type and some measures like month_jan, month_feb, month_mar
so the fact table looks like (column names) tx_type, month_jan, month_feb, month_mar
2) I need to select the measure column based on a user dashboard prompt, prompt populates a presentation variable var_month = jan or feb or mar
3) I need to select the correct measure (one of these month_jan, month_feb, month_mar) and then apply column filter based on the dim TX_type to split the values of these into multiple columns for report. So the report may look like (in Answers)
Sales , Tax, overheads
where Sales may be defined as sum(month_jan) where rows have TX_type = 'sales'
where Tax may be defined as sum(month_feb) where rows have TX_type = 'tax'
where overheads may be defined as sum(month_mar) where rows have TX_type = 'overheads'
IF the user selects jan
IF user selects Feb then the 3 report columns are based on month_feb and likewise for month_mar
I cannot use column selector option as the report column further apply filter in column filter definitions in Answers...
4) When I try to build the column filter using a presentation variable (var_month), the presentation variable is not getting populated in the column filter.
For e.g. IF var_month = 'jan'
THEN month_jan (let us assume the logical column name is month_jan too)
ELSE month_feb and so on...
However, the var_month always shows 0 in the IF clause. If we used a repository variable instead, it works fine. But since repostory variable cannot be changed on the fly (by user prompt) it is not usable.
We cannot change fact table defintion....and we have 12 measures column and about 8-10 different colum filter based report columns using this measure.

Hi shyamvaran,
have you thought about a SQL statement in the prompt, something like:
SELECT
case when 1=0 then Table."Column" else 'Jan' end
FROM "Subject Area"
union
SELECT
case when 1=0 then Table."Column" else 'Feb' end
FROM "Subject Area"
union
SELECT
case when 1=0 then Table."Column" else 'Mar' end
FROM "Subject Area"
union
SELECT
case when 1=0 then Table."Column" else 'Apr' end
FROM "Subject Area"
etc...
Use this to give you the 12 values for your months then give the prompt column a presentation variable name and set a default value in the 'Default To'. Also set the same default value for the filter.
A couple of points:
1. If you're transforming the presentation variable from 'Jan' to 'month_jan' you may need to edit the syntax for the filter column (not using the dialog box).
2. If you're transforming the behaviour of a dimension / measure column in the report, have you specified the syntax correctly, e.g. sum('@{pres_var}')?
Hope this helps,
Justin

Multiclip editing not cutting, Markers dissappear when stop playing

Im doing a multiclip edit for the first time and im having issues!
I have the 3 angles i need set up and sync in a multiclip and can get it playing fine ie viewer has the 3 angles playing at once and select angle is showing in the canvas. I play the clip and begin to add cut points (by clicking on angle when i want to change to it) a marker appears in the timeline as it should but when i stop playing all the markers disappear and im back to square-one again!!!!
As far as i can tell the setting are correct, i have the viewer set to open and multiclip playback enabled and all looks great it just wont insert the cut points!!!
PLEASE HELP!

I'm no longer using 5.x, but I remember some odd bug with multiclips doing only a Switch to (instead of a Cut to) which results in the behavior you're mentioning: the markers disappearing as soon as you stop playback. I believe the issue was either related to being in a customized, but unsaved custom keyboard layout.
I guess what I'm saying is: does going to Tools > Keyboard Layout and selecting either layout (Default or Multiclip) affect the issue?

Post subject: cannot apply filter to the report element

Hi All,
I have a report that has checkbox Input Controls. when the user is viewing the report and try to manuplate the input controls its throwing an error saying
cannot apply filter to the report element: DP0.DO1e5
I tried to do the same with an admin account still its showing the same error but when when I edit the report its not throwing the error. The problem is with the View mode
Thanks
-K

Not sure why this is but deleting the input controls in the edit mode and re-applying works sometimes.
Thanks,
Karthik

Apply filter based on LOV

I have 2 reports by 2 different dates; current date and future date
report1 is determined by applying filter to current date
report2 is determined by applying filter to future date
and layout for both report are same, user wants combine the above into a single report with an option of selecting any date he wants...?
any ideas please......

Hi,
do the following steps to achieve this.
(1) create prompt that contains -
(i) "Date option" using any column....write sql like {{ select 'Current' from <Presentation table name> where 1=0 Union
select 'Future' from <Presentation table name> where 1=0 }}
and take this value in Presentation variable say....VarOption //For user choice to select Current or Future date.
(ii) Date column either current or future. and use that date value in Presentation variable say....VarDate
(2) at Report side - (Union both report)
(i) create one more column say "Date option" on both report.and edit formula as "Current" in report1
and "Future" in report2
(ii) apply filter on "Date option" where value=@VarOption and "Current date"=@VarDate on report1.
apply filter on "Date option" where value=@VarOption and "Future date"=@VarDate on report2.
....let me know if it helps you
Regards,
Devendra

Error in applying filter on coherence data

I am trying to apply filter on coherene cache data in *.Net*.
I put some data on cache. I am able to retrieve all data using AlwaysFilter. But when I try to apply any custom filter ( like on line 3 below) I am getting error Unknon user type 1002. I have POF config file with proper user type 1002.
INamedCache Cache = CacheFactory.GetCache("DSOM-Part-Cds-watsportal");
var AllList1 = Cache.GetValues(new AlwaysFilter()); ///This code works properly. It give me all the objects I put in cache.
var entries = Cache.GetEntries(new EqualsFilter("getOrderNo", "testOrder")); //Getting below error on this line
Am I missing anything here?
ERROR :
(Wrapped: Failed request execution for DSOM-PartitionedCacheService service on Member(Id=1, Timestamp=2013-02-15 15:20:50.318, Address=###.13.50.139:80##, MachineId=141, Location=site:,machine:####,process:15158,member:DSOMPartioned-node1, Role=CoherenceServer) (Wrapped) unknown user type: 1002) unknown user type: 1002
Edited by: 994003 on Mar 14, 2013 12:40 PM

Hi,
If you have a POF configuration with an entry for 1002, is the cache server actually using the correct configuration file. In the server side log file you should see something like this...
2013-03-18 08:47:14.287/9.343 Oracle Coherence GE 3.7.1.7 <Info> (thread=DistributedCache:SequenceService, member=1): Loaded POF configuration from "file:/C:/project/out/production/core/config/pof-config.xml"; this document does not refer to any schema definition and has not been validated.so you can see if the correct file is being used.
JK

Applying filter to 'Other Users' has stopped working (v1.0.0.15.57)

With no apparant reason (or changes to my workstation), the apply filter feature to limit 'Other Users' has stopped working. The problem began on the day that SQLDev failed to display the navigation frame.
I've got the nav frame back, but the filter on 'Other Users' still doesn't work.
Can anyone tell me where the filter entries are stored?
Oh, what's worse, the initial display of 'Other Users' does not include the entire list. Today the 'Show more/All users' failed to expand the list to all users. One of the users not initially displayed owns files to which I need access. (The solution was to stop and restart SQLDev - but that is a pain is the a$$.)

Editing preference files is not supported. Doing so can corrupt the settings and cause SQL Developer to run improperly.
Okay, having gotten that out of the way, let me see if I can help you get this sorted out. The filters are stored inside the preferences.xml file, located under jdev\system\oracle.onlinedb.11.0.0.37.42.
The first step is to back up this file. Once you have done that, you can try to remove the filter info. The preferences in the file are stored as keys and values. Search for the key with the text 'ConnectionOptions'. Under the value element associated with this key, there should be a filterMap element. This element contains all of the navigator filters. Each filter will look like this:
<Item>
<Key><others>@local</Key>
<Value class="oracle.jdeveloper.cm.dt.browser.SchemaFolderFilter">
<filter>
<Item>FOO</Item>
<Item>SYS</Item>
<Item>SYSTEM</Item>
</filter>
<visibleObjectsOnly>false</visibleObjectsOnly>
</Value>
</Item>
In this case, this is a filter on the Other Users folder. To clear the filter, remove the entire item element (that is, delete everything between and including the <item> and </item>.
This should restore the navigator filter back to its initial state (that is, no filter).
Let me know if this doesn't work, and I'll come up with some other things to try.
John McGinnis
SQL Developer Team

Blackberry Curve 9320 - Dust in screen and will only charge on a certain angle

I have had the phone for 4 months now and already in the first week of using it I noticed that dust had started to come into the underside of the screen. Its on the left hand side near to the charger socket and also that little hole above it. I have no idea how dust can get into the screen but my friends have exactly the same phone and don't have a problem with it? What can I do to solve the dust problem? Also when I plug in the charger into the phone it will only charge on a certain angle! What is the problem? I thought Blackberry's were meant to be reliable and trustworthy but I don't think they are at all! I am truly disappointed in this product! A phone should be reliable without any problems at all! And I have only had it 4 months! Some please help me. Thanks, Steven

Hi and Welcome to the Community!
Devices designed, build, and operated by humans cannot expect to be 100% perfect. From what you describe, I'd deduce that you are simply the unlucky recipient of one of those defects -- but one defect (among millions) hardly rates something to be so negatively thought of, does it?
Now, if you've already sought formal help from your provider/reseller, then you may have cause for distrust. But, if this is your first attempt to resolve this unlucky situation, then I recommend you not try to fix this yourself...rather, head right down to your provider and insist on warranty-level evaluation and support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How can I use ALL audio tracks in multiclip editing?

I want to be able to use all audio tracks after the multiclip cut.
It's only a two camera shoot, but I want to be able to use the ambient room sound from the second camera ... and control its level (in relation to the master audio track on the first camera) AFTER the cuts are made.
Is this possible in multiclip editing? And how does one go about it?
Apologies. I've spent an hour or so in the manual, and it isn't clear ... or I'm just not finding the right reference.
All ears,
Ben

Sorry if I'm steering you down a path you don't want to go or even if there's a better way but I wouldn't be ding complex audio mixing anywhere near the multiclip interface. Export your reference movie or nest the multiclip project into another sequence, bring in your additional tracks, get to work. Just my preferences, I put a bunch of rough keyframes in the audio tracks and enter some markers (and make a lot of paper notes). Then I go back using the large mixer window to do the fine tweaking.
Stick around for a couple of days, some other multiclip users with more experience than I will offer some more useful suggestions.
bogiesan

Multiclip editing: applying filter to a certain angle

Similar Messages

Maybe you are looking for