Multilink PPP bundles - "name routerX doesn't match"

Hi folks,
I'm using various 2600's with ISDN BRI's (basic-ni) dialing into a common NAS with 2 T1's (primary-dms100).
When I activate a single 2600, it will connect successfully and create an MLP bundle on the NAS using the 2600 hostname as an identifier. The problem arises when another 2600 attempts to establish a connection while an MLP bundle exists. I'm seeing the following error:
=========================================
Oct 22 12:39:30 EDT: %DIALER-6-BIND: Interface Se2/1/0:15 bound to profile Di1
Oct 22 12:39:30 EDT: %LINK-3-UPDOWN: Interface Serial2/1/0:15, changed state to up
Oct 22 12:39:31 EDT: Se2/1/0:15 MLP: Request add link to bundle
Oct 22 12:39:31 EDT: Se2/1/0:15 MLP: Adding link to bundle
Oct 22 12:39:31 EDT: Se2/1/0:15 MLP: Link unable to join bundle routerX, name routerY doesn't match
Oct 22 12:39:31 EDT: Se2/1/0:15 MLP: Link for 5555551234 not added to bundle
Oct 22 12:39:31 EDT: %DIALER-6-UNBIND: Interface Se2/1/0:15 unbound from profile Di1
=========================================
I am unsure why routerY is attempting to join routerX's bundle. It seems to me routerY should try to establish a bundle of it's own using "routerY" as an identifier.
Attached are my interface configs. If anyone can point me in the right direction here it will be appreciated. Thanks.

Hello,
my first thought would be that the Dialer 1 on your NAS does not have the 'dialer remote-name' configured and hence does not know who is connecting. Also, on your 2600, you have the 'class dialer' configured on your 2600, is that configured for callback ? Can you post that part, or better yet, the full configuration of both the NAS and the 2600 ?
Regards,
GP

Similar Messages

Kerberos error when using a DNS name that doesn't match the Active Directory domain name

I am running into a weird issue with a new SQL Reporting Services server I built. I installed SQL Reporting 2014 on Windows Server 2012 R2 and configured Kerberos, but the site is extremely slow. After some reconfiguration and log captures I have determined
the issue has to do with the Kerberos setup but it is an exact replica of a Windows Server 2008 R2 server we currently have and it does not have these issues.
The error I see while using Wireshark is KRB Error: KRB5KDC_ERR_BADOPTION NT Status: STATUS_NO_MATCH.
When I drill down the into the error I can see the kerberos string is testprjmnmtreports14.company.com, which is the URL we are using to access the site. I made sure to add that name as an SPN for the service account that is running SQL Reporting Services,
however I still receive the error.
Then I tried configuring the site to run without a hostheader, so I accessed the site with the server name ECTSTSQLRS5 and the site works perfectly fine, no errors are reported either. So it seems I have isolated the issue down to Kerberos but I am not sure
how to resolve it. Here is some more information about my environment:
DNS/URL used: testprjmnmtreports14.company.com
Server Name (FQDN): ECTSTSQLRS5.company.int
AD Domain Name: company.int
Server Version: Windows Server 2012 R2
AD Functional Level: 2008 R2
I also have the following SPNs set for my SQL service account:
http/testprjmngmtreports14.company.com
http/testprjmngmtreports14
http/ECTSTSQLRS5.COMPANY.INT
http/ECTSTSQLRS5
As you can see I am trying to use a .com address but my AD domain is .int which I think is the issue, but I do not have the same problem on my other server that is running Windows Server 2008 R2.
Has anyone see this issue before? What do I need to do to allow my new site on 2012 R2 to work with this DNS Alias?
Thanks,
Brandon

Hi
Quote from there; Kerberos errors in network captures
The most common scenario is a request for a delegated ticket (unconstrained or constrained delegation). You will typically see this on the middle-tier server trying to access a back-end server. There are several reasons for rejection:
1. The service account is not trusted for delegation
2. The service account is not trusted for delegation to the SPN requested
3. The user’s account is marked as sensitive
4. The request was for a constrained delegation ticket to itself (constrained delegation is designed to allow a middle tier service to request a ticket to a back end service on behalf on another user,
not on behalf of itself).
Regards, Philippe
Don't forget to mark as answer or vote as helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
Answer an interesting question ? Create a
wiki article about it!

Multilink PPP problem

Hi Guys,
i got a situation here and hope someone will be able to help me out. Recently i configured a PPP multilink and am facing some issues after that.
Issue 1:
There seems to be lot of input error on multilink interface (150 errors in 40 mins)
Issue 2:
when any of the multilink member interface goes down (all other links are active), am getting packrt drops and request timed out when i ping my other end multi link interface atleast for some 30 sec , after which my response is ok.
About my network
I have connectivity between site A and Site B which consists of five 64 kbps Leased lines bundled together with Multilink PPP
My configuration is shown below
End A
interface multilink 1
ip address x.x.x.x x.x.x.x
ppp multilink fragment-delay 20
ppp multilink interleave
ppp multilink
multilink-group 1
int Ser 2/0
bandwidth 64
no ip address
no ip redirects
no ip proxy-arp
encapsulation ppp
no ip route-cache
no ip mroute-cache
no fair-queue
ppp multilink
multilink-group 1
int Ser 2/1
bandwidth 64
no ip address
no ip redirects
no ip proxy-arp
encapsulation ppp
no ip route-cache
no ip mroute-cache
no fair-queue
ppp multilink
multilink-group 1
int Ser 2/2
bandwidth 64
no ip address
no ip redirects
no ip proxy-arp
encapsulation ppp
no ip route-cache
no ip mroute-cache
no fair-queue
ppp multilink
multilink-group 1
int Ser 2/3
bandwidth 64
no ip address
no ip redirects
no ip proxy-arp
encapsulation ppp
no ip route-cache
no ip mroute-cache
no fair-queue
ppp multilink
multilink-group 1
int Ser 2/4
bandwidth 64
no ip address
no ip redirects
no ip proxy-arp
encapsulation ppp
no ip route-cache
no ip mroute-cache
no fair-queue
ppp multilink
multilink-group 1
End B
interface multilink 1
ip address ip address x.x.x.x x.x.x.x
ppp multilink fragment-delay 20
ppp multilink interleave
ppp multilink
multilink-group 1
interface S 2/0:1
bandwidth 64
no ip address
no ip redirects
no ip proxy-arp
encapsulation ppp
no ip route-cache
no ip mroute-cache
no fair-queue
ppp multilink
multilink-group 1
interface S 2/0:11
bandwidth 64
no ip address
no ip redirects
no ip proxy-arp
encapsulation ppp
no ip route-cache
no ip mroute-cache
no fair-queue
ppp multilink
multilink-group 1
interface S 2/0:25
bandwidth 64
no ip address
no ip redirects
no ip proxy-arp
encapsulation ppp
no ip route-cache
no ip mroute-cache
no fair-queue
ppp multilink
multilink-group 1
interface S 2/0:4
bandwidth 64
no ip address
no ip redirects
no ip proxy-arp
encapsulation ppp
no ip route-cache
no ip mroute-cache
no fair-queue
ppp multilink
multilink-group 1
interface S 2/0:6
bandwidth 64
no ip address
no ip redirects
no ip proxy-arp
encapsulation ppp
no ip route-cache
no ip mroute-cache
no fair-queue
ppp multilink
multilink-group 1

pls find the output of show command
END A #sh int multilink 5
Multilink5 is up, line protocol is up
Hardware is multilink group interface
Description: ***Multilink to End B ***
Internet address is 192.26.0.162/30
MTU 1500 bytes, BW 320 Kbit, DLY 100000 usec,
reliability 255/255, txload 2/255, rxload 1/255
Encapsulation PPP, loopback not set
Keepalive set (10 sec)
DTR is pulsed for 2 seconds on reset
LCP Open, multilink Open
Open: IPCP, CDPCP
Last input 00:00:00, output never, output hang never
Last clearing of "show interface" counters 19:55:13
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 2000 bits/sec, 4 packets/sec
5 minute output rate 3000 bits/sec, 4 packets/sec
309478 packets input, 58763590 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
1492 input errors, 0 CRC, 1492 frame, 0 overrun, 0 ignored, 0 abort
290606 packets output, 32728691 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
END A #sh ppp multilink
Multilink5, bundle name is End B
Bundle up for 22:06:31
493 lost fragments, 162050 reordered, 0 unassigned
999 discarded, 0 lost received, 3/255 load
0xAE5E6 received sequence, 0x69F6B sent sequence
Member links: 5 active, 0 inactive (max not set, min not set)
Se2/0, since 20:07:34, last rcvd seq 0AE5E1, 160 weight, 152 frag size
Se2/2, since 20:04:45, last rcvd seq 0AE5E2, 160 weight, 152 frag size
Se2/3, since 20:04:07, last rcvd seq 0AE5E3, 160 weight, 152 frag size
Se2/5, since 20:03:24, last rcvd seq 0AE5E4, 160 weight, 152 frag size
Se2/1, since 19:57:12, last rcvd seq 0AE5E5, 160 weight, 152 frag size
Am getting 1400 input errors in last 19 hours on multilink interface, also less than 100 input errors on member serial interfacs.Also am not loosing any link member.

3201: The publisher display name FooBar, specified in the package doesn't match the publisher name, FooBar

I've updated a WP 8.0 application to WP 8.1 Silverlight. When I try to deploy a demo application I get the following error;
3201: The publisher display name, FooBar, specified in the package doesn’t match the publisher name,
FooBar, that’s associated with the developer account.
I've seen several cases with people encounter this issue and then solved by modifying WPAppManifest or the Packages file. My problem is that the
display name and publisher name is exactly the same. Both in the application xml files and in the error message displayed by windows phone store.
Any suggestions?

There is no requirement that source code files are in the correct directory structure. If you want javac to be able to automatically compile dependent files, then the source code must be in an appropriate structure and find-able from the classpath.
Also, when you use the -d option, javac will create an appropriate directory relative to the directory specified in the -d option. That's how it is supposed to work.
So it is working as designed and specified.

The song name doesn't match to itunes.

Ever since i've update my itunes, i've encountered this problem. I change the song name and artist info by right-clicking the song and then clicking 'get info', but after i sync and take out my iphone 4s, the song name change doesn't appear on my phone. Anyone got any ideas?

If you back it up right, you will not lose anything.
And to unsync, follow these steps, exactly as I write them.
1. Plug in device, open iTunes.
2. On the left hand column of iTunes, click on the "XXXX's iPhone" under Devices
3. Above the picture of the iPhone in the middle of your screen, there will be tabs, they start with Summary, Info, Apps ect...
4. Locate the tab called "Music" and click on it
5. Uncheck the box for syncing music
6. Then click the "Apply" button in the bottom right corner, then wait for it to unsync
7. To resync, then just check the box next to Sync Music again, and apply the changes again.
If any of the steps look different than what you see, let me know.

SDK 3.0 error: profile doesn't match Application Identifier

I'm testing my app w/ iPhone SDK 3.0 beta 5 on Xcode 3.1.3.
Development provisioning profile under "Project-> Info -> Code Signing Identity" is grayed out & shows the error(including quote at the end):
profile doesn't match Application Identifier "
any ideas? The same profile has no such issue w/ SDK 2.2.1 on Xcode 3.1.
My Bundle Identifier is of the below format :
com.<mycompanyname>.{PRODUCT_NAME:identifier}
I specified the "Product name" under both "Project -> Info" & "Target -> Info".. that didn't help either.
I also noticed that there is no such problem under "Target -> Info -> Code Signing Identity"
I'm testing to ensure compatibility of my 2.2.1 app with 3.0. I appreciate any help with this issue.. It has been a frustrating couple of days trying to resolve just this one issue which is preventing me from codesigning onto my iphone

I was able to deploy to my iphone by following the instructions here
http://www.loonsoft.com/posts/21
Note: it is {} and not () ${SDKROOT}/ResourceRules.plist
I was getting the below error during codesign & I thought that the above "graying out" of the dev provisioning profile in the "Code Signing Identity" was causing it.
"object file format invalid or unsuitable"
Turns out it does not prevent me from deploying to my iphone after I fixed the SDKROOT. I still have the dev provisioning profile grayed out and would be interested to know how to solve this problem "cleanly" even though it doesn't seem to have any immediate downside.. fingers crossed for distribution signing.

Error: The decapsulated inner packet doesn't match the negotiated policy in the SA

I upgraded my ASA from 8.2(1) to 8.4(3) as I wanted to try to get Android devices to properly connect via VPN.
After some effort, I was able to get the Android devices to connect via VPN. However, my syslog server has a number of errors recorded that look this this:
%ASA-4-402116: IPSEC: Received an ESP packet (SPI= 0x1E76EFA6, sequence number= 0x1F0) from x.x.x.x (user= testuser) to y.y.y.y. The decapsulated inner packet doesn't match the negotiated policy in the SA. The packet specifies its destination as z.z.z.z, its source as a.a.a.a, and its protocol as tcp. The SA specifies its local proxy as y.y.y.y/255.255.255.255/udp/42246 and its remote_proxy as x.x.x.x/255.255.255.255/udp/0.
Digging further, it seems this error might be due to a NAT issues with the VPN connections. VPN previously worked with Cisco's VPN client on Windows, though I did not test to see if that is no longer working. However, I made no changes in the config, except for those related to additions needed to support L2TP. With the below config, Android clients can connect to the ASA and access the internal network, but they cannot connect to external addresses. I'm at a loss.
The addresses used in the config: 192.168.1.0/24 are on the internal LAN and 192.168.3.0/24 are addresses assigned to VPN clients.
I noted in the config this line:
access-list inside_nat0_outbound extended permit ip any 192.168.3.0 255.255.255.0
The access list is not referenced anywhere, though it was referenced in the 8.2(1) config like this:
nat (inside) 0 access-list inside_nat0_outbound
I'm not sure what else changed, but I've looked over the config and I just cannot see what the issue might be. I'm hoping somebody might be able to point out my error.
Here's the config file (at least the parts that might be of interest):
: Saved
ASA Version 8.4(3)
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address dhcp setroute
boot system disk0:/asa843-k8.bin
object network obj-192.168.3.0
subnet 192.168.3.0 255.255.255.0
object network obj_any
subnet 0.0.0.0 0.0.0.0
access-list outside_access_in extended permit icmp any interface outside time-exceeded
access-list outside_access_in extended permit icmp any interface outside echo-reply
access-list outside_access_in extended permit icmp any interface outside unreachable
access-list outside_mpc extended permit ip any interface outside
access-list inside_mpc extended permit ip 192.168.1.0 255.255.255.0 any
access-list testVPN_splitTunnelAcl extended permit ip 192.168.1.0 255.255.255.0 any
access-list inside_nat0_outbound extended permit ip any 192.168.3.0 255.255.255.0
ip local pool VPN-Pool-1 192.168.3.1-192.168.3.254 mask 255.255.255.0
ip verify reverse-path interface outside
nat (inside,any) source static any any destination static obj-192.168.3.0 obj-192.168.3.0 no-proxy-arp
object network obj-192.168.3.0
nat (outside,outside) dynamic interface
object network obj_any
nat (inside,outside) dynamic interface
access-group outside_access_in in interface outside
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANSP esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANSP mode transport
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANSP esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANSP mode transport
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 10 set ikev1 transform-set ESP-AES-128-SHA-TRANSP ESP-3DES-SHA-TRANSP
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ikev1 enable outside
crypto ikev1 policy 5
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 10
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
group-policy testVPN internal
group-policy testVPN attributes
wins-server value 192.168.1.8
dns-server value 192.168.1.8 192.168.1.4
vpn-idle-timeout none
vpn-tunnel-protocol ikev1
split-tunnel-policy tunnelspecified
split-tunnel-network-list value testVPN_splitTunnelAcl
default-domain value test.us
group-policy testVPNnsl2tp internal
group-policy testVPNnsl2tp attributes
wins-server value 192.168.1.8
dns-server value 192.168.1.8 192.168.1.4
vpn-idle-timeout none
vpn-tunnel-protocol l2tp-ipsec
group-policy testVPNns internal
group-policy testVPNns attributes
wins-server value 192.168.1.8
dns-server value 192.168.1.8 192.168.1.4
vpn-idle-timeout none
vpn-tunnel-protocol ikev1
username testuser password PASSWORD encrypted privilege 15
username testuser2 password PASSWORD nt-encrypted privilege 15
tunnel-group DefaultRAGroup general-attributes
address-pool VPN-Pool-1
default-group-policy testVPNnsl2tp
tunnel-group DefaultRAGroup ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group DefaultRAGroup ppp-attributes
authentication ms-chap-v2
tunnel-group testVPN type remote-access
tunnel-group testVPN general-attributes
address-pool VPN-Pool-1
default-group-policy testVPN
tunnel-group testVPN ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group testVPNns type remote-access
tunnel-group testVPNns general-attributes
address-pool VPN-Pool-1
default-group-policy testVPNns
tunnel-group testVPNns ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group testVPNnsl2tp type remote-access
tunnel-group testVPNnsl2tp general-attributes
address-pool VPN-Pool-1
default-group-policy testVPNnsl2tp
tunnel-group testVPNnsl2tp ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group testVPNnsl2tp ppp-attributes
authentication ms-chap-v2
One last question: in order to get the connection from Android to work, I was forced to use "tunnel-group DefaultRAGroup". Is that actually a limitation, or did I make an error that forced that requirement? I wanted to use "tunnel-group testVPNnsl2tp".
Thanks!

Chris,
This is still a bit off the mark. I think I might be confusing the issue by including some of the VPN configuration that I had previously installed and working (e.g., two other VPN tunnel groups with split tunneling on one of them). Let's just remove that stuff from consideration. I actually tested the current configs just to see if they are working since the upgrade. testVPN is working with the split tunneling, but testVPNns (no-split tunneling) does not allow external access. I guess there is a NAT config issue there, too, but not sure what it is, yet. I've not investigated that closely.
I want to solve one problem at a time, though I understand there are some interdependencies.
What I'd like to focus on right now is just the L2TP VPN connection.
From what I've been able to understand from the documentation, what I need are these lines:
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANSP esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANSP mode transport
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANSP esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANSP mode transport
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 10 set ikev1 transform-set ESP-AES-128-SHA-TRANSP ESP-3DES-SHA-TRANSP
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ikev1 enable outside
group-policy testVPNnsl2tp internal
group-policy testVPNnsl2tp attributes
wins-server value 192.168.1.8
dns-server value 192.168.1.8 192.168.1.4
vpn-idle-timeout none
vpn-tunnel-protocol l2tp-ipsec
tunnel-group DefaultRAGroup general-attributes
address-pool VPN-Pool-1
default-group-policy testVPNnsl2tp
tunnel-group DefaultRAGroup ipsec-attributes
ikev1 pre-shared-key P74bmqL6rT40bl5
tunnel-group DefaultRAGroup ppp-attributes
authentication ms-chap-v2
crypto ikev1 policy 5
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
I still want to assign the IP addresses to VPN clients out of 192.168.3.0/24.
The tricky part is understanding exactly what NAT rules to insert and to avoid that error message I'm getting relatred to the encapsulated packets. I tried to introduce the commands you had, but it's missing stuff that I would need for L2TP/IPSec (e.g., "mode transport"). I also don't think I want "pfs group5". The above config "works" in that I get connected -- all negotiation is done. It's just that packets from the VPN client are not able to go out to the Internet and I'm seeing that encapsulation error messages when I try to send a packet.
Paul

The located assembly's manifest definition with name 'openfoundation' does not match the assembly re

Ok. been working on this for the better part of a day. I am having trouble with the .net web controls. trying to create a simple portlet that populates a text box with values from a 2nd text box when a button is selected. both text boxes are in the same portlet.
without using the <httpModules> entry in the web.config file the portlet works fine, but it does pop you out of the portal.
setup: working in a Dev. environment with portal and portlets on the same box.Portal version is 5.0.2.EDK version is 5.0.2.
error:
The located assembly's manifest definition with name 'openfoundation' does not match the assembly reference.Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.IO.FileLoadException: The located assembly's manifest definition with name 'openfoundation' does not match the assembly reference.Source Error:An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.Assembly Load Trace:The following information can be helpful to determine why the assembly 'openfoundation' could not be loaded.=== Pre-bind state information ===
LOG: DisplayName = openfoundation, Version=2.0.9.3152, Culture=neutral, PublicKeyToken=d0e882dd51ca12c5
(Fully-specified)
LOG: Appbase = file:///c:/inetpub/wwwroot/netTest
LOG: Initial PrivatePath = bin
Calling assembly : dotnetportlet, Version=3.5.0.1, Culture=neutral, PublicKeyToken=null.
===
LOG: Publisher policy file is not found.
LOG: No redirect found in host configuration file (C:\WINNT\Microsoft.NET\Framework\v1.1.4322\aspnet.config).
LOG: Using machine configuration file from C:\WINNT\Microsoft.NET\Framework\v1.1.4322\config\machine.config.
LOG: Post-policy reference: openfoundation, Version=2.0.9.3152, Culture=neutral, PublicKeyToken=d0e882dd51ca12c5
LOG: Attempting download of new URL file:///C:/WINNT/Microsoft.NET/Framework/v1.1.4322/Temporary ASP.NET Files/nettest/9e6689f5/a0d2f067/openfoundation.DLL.
LOG: Attempting download of new URL file:///C:/WINNT/Microsoft.NET/Framework/v1.1.4322/Temporary ASP.NET Files/nettest/9e6689f5/a0d2f067/openfoundation/openfoundation.DLL.
LOG: Attempting download of new URL file:///c:/inetpub/wwwroot/netTest/bin/openfoundation.DLL.
WRN: Comparing the assembly name resulted in the mismatch: Minor Version
Stack Trace:[FileLoadException: The located assembly's manifest definition with name 'openfoundation' does not match the assembly reference.]
   Plumtree.Remote.Portlet.PortletContextFactory.CreatePortletContext(HttpRequest req, HttpResponse resp) +0
   Com.Plumtree.Remote.Transformer.Condition.GatewayedStandardCondition.UseFilter(HttpContext ctx)
   Com.Plumtree.Remote.Transformer.FilterManager.UpdateFilter(HttpContext ctx)
   Com.Plumtree.Remote.Transformer.PTTransformer.BeginRequestHandler(Object sender, EventArgs e)
   System.Web.SyncEventExecutionStep.System.Web.HttpApplication+IExecutionStep.Execute() +60
   System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +87
Version Information: Microsoft .NET Framework Version:1.1.4322.573; ASP.NET Version:1.1.4322.947
************************************************************Is there any step by step instructions for setting up and using the .net web controls in Plumtree????
There doesn't seem to be any information in one spot as to setting up the environment to use the .Net Web Controls. I have had to piece together information from multipule threads to get this far. I.E. there was nothing in any documentation that I have read that required the installation of the VJ# lib's. (that error took me the first half of the day to resolve :-) )
Thanks for any help,
Greg************************************************************

Also, when reviewing the Plumtree_.NET_Web_Controls_InstallLog.log there were 5 nonfatal erros. These error's were:
Install File: E:\plumtree\ptwc\2.0\bin\assemblies\edk.dll Status: ERROR Additional Notes: ERROR - java.io.FileNotFoundException: E:\plumtree\ptwc\2.0\bin\assemblies\edk.dll (The process cannot access the file because it is being used by another process)
Install File: E:\plumtree\ptwc\2.0\bin\assemblies\jsregistry.dll Status: ERROR Additional Notes: ERROR - java.io.FileNotFoundException: E:\plumtree\ptwc\2.0\bin\assemblies\jsregistry.dll (The process cannot access the file because it is being used by another process)
Install File: E:\plumtree\ptwc\2.0\bin\assemblies\log4net.dll Status: ERROR Additional Notes: ERROR - java.io.FileNotFoundException: E:\plumtree\ptwc\2.0\bin\assemblies\log4net.dll (The process cannot access the file because it is being used by another process)
Install File: E:\plumtree\ptwc\2.0\bin\assemblies\openfoundation.dll Status: ERROR Additional Notes: ERROR - java.io.FileNotFoundException: E:\plumtree\ptwc\2.0\bin\assemblies\openfoundation.dll (The process cannot access the file because it is being used by another process)
Install File: E:\plumtree\ptwc\2.0\bin\assemblies\Plumtree.WCFilter.dll Status: ERROR Additional Notes: ERROR - java.io.FileNotFoundException: E:\plumtree\ptwc\2.0\bin\assemblies\Plumtree.WCFilter.dll (The process cannot access the file because it is being used by another process)
When installing the Web Control's do you need to stop any services? I didn't see anything in the install notes about doing this?

Column count doesn't match value count at row 1, unknown number of columns

Hi,
I am making a program to read data from excel files as the above and store them in tables. I have managed to read all the data from excel files as a string and store them in a table.
ID Name Salary
50 christine 2349000
43 paulina 1245874
54 laura 4587894
23 efi 3456457
43 jim 4512878
But in my project I have several other files that have same cell that are blank as the above example
ID Name Salary
50 christine 2349000
43 paulina
laura 4587894
23 3456457
43 jim 4512878
and when i ran the same program i get this exception :
SQLException: Column count doesn't match value count at row 1
SQLState: 21S01
VendorError: 1136The code for creating the table and inserting the values is above:
private static String getCreateTable(Connection con, String tablename,
                    LinkedHashMap<String, Integer> tableFields) {
               Iterator iter = tableFields.keySet().iterator();
               Iterator cells = tableFields.keySet().iterator();
               String str = "";
               String[] allFields = new String[tableFields.size()];
               int i = 0;
               while (iter.hasNext()) {
                    String fieldName = (String) iter.next();
                    Integer fieldType = (Integer) tableFields.get(fieldName);
                    switch (fieldType) {
                    case Cell.CELL_TYPE_NUMERIC:
                         str = fieldName + " INTEGER";
                         break;
                    case Cell.CELL_TYPE_STRING:
                         str = fieldName + " VARCHAR(255)";
                         break;
                    case Cell.CELL_TYPE_BOOLEAN:
                         str = fieldName + " INTEGER";
                         break;
                    default:
                         str = "";
                         break;
                    allFields[i++] = str;
               try {
                    Statement stmt = con.createStatement();
                    try {
                         String all = org.apache.commons.lang3.StringUtils.join(
                                   allFields, ",");
                         String createTableStr = "CREATE TABLE IF NOT EXISTS "
                                   + tablename + " ( " + all + ")";
                         System.out.println("Create a new table in the database");
                         stmt.executeUpdate(createTableStr);
                    } catch (SQLException e) {
                         System.out.println("SQLException: " + e.getMessage());
                         System.out.println("SQLState:     " + e.getSQLState());
                         System.out.println("VendorError: " + e.getErrorCode());
               } catch (Exception e)
                    System.out.println( ((SQLException) e).getSQLState() );
                    System.out.println( e.getMessage() );
                    e.printStackTrace();
               return str;
          private static void fillTable(Connection con, String fieldname,
                    LinkedHashMap[] tableData) {
               for (int row = 0; row < tableData.length; row++) {
                    LinkedHashMap<String, Integer> rowData = tableData[row];
                    Iterator iter = rowData.entrySet().iterator();
                    String str;
                    String[] tousFields = new String[rowData.size()];
                    int i = 0;
                    while (iter.hasNext()) {
                         Map.Entry pairs = (Map.Entry) iter.next();
                         Integer fieldType = (Integer) pairs.getValue();
                         String fieldValue = (String) pairs.getKey();
                         switch (fieldType) {
                         case Cell.CELL_TYPE_NUMERIC:
                              str = fieldValue;
                              break;
                         case Cell.CELL_TYPE_STRING:
                              str = "\'" + fieldValue + "\'";
                              break;
                         case Cell.CELL_TYPE_BOOLEAN:
                              str = fieldValue;
                              break;
                         default:
                              str = "";
                              break;
                         tousFields[i++] = str;
                    try {
                         Statement stmt = con.createStatement();
                         String all = org.apache.commons.lang3.StringUtils.join(
                                   tousFields, ",");
                         String sql = "INSERT INTO " + fieldname + " VALUES (" + all
                                   + ")";
                         stmt.executeUpdate(sql);
                         System.out.println("Fill table...");
                    } catch (SQLException e) {
                         System.out.println("SQLException: " + e.getMessage());
                         System.out.println("SQLState: " + e.getSQLState());
                         System.out.println("VendorError: " + e.getErrorCode());
               }To be more specific the error it in the second row where i have only ID and Name in my excel file and only these i want to store. The third row has only Name and Salary and no ID. How i would be able to store only the values that i have and leave blank in the second row the Salary and in the third row the ID? Is there a way for my program to skip the blanks as empty value?
Edited by: 998913 on May 9, 2013 1:01 AM

In an unrelated observation, it appears you are creating new database tables to hold each document. I don't think this is a good idea. Your database tables should be created using the database's utility program and not programmatically. The database schema should hardly ever change once the project is complete.
As a design approach: One database table can hold your document names, versions, and date they were uploaded. Another table will hold the column names and data types. Another table can hold the data (type for all data = String). This way, you can join the three tables to retrieve a document. Your design will only consists of those three tables no matter how many unique documents you have. You probably should seek the advice of a DBA or experienced Java developer on exactly how structure those tables. My design is a rough layout.

No error if source directory and package doesn't match

Hello,
I am using Sun's jdk1.5.0_09 "javac" compiler and the package name in my Test class is written as "com.hrishijoshi.asdf". This file compiles even if I put it in a directory called "com" (or anything else, as a matter of fact).
javac doesn't throw error even if the source file's directory structure doesn't match the package name defined in that file! It creates a directory structure matching the package name (not the source tree) in the output "classes" directory.
Is this a feature or a bug? ;-)
- Hrishi Joshi.
PS: Here is a log of my compilation attempt on Fedora Core 5 Linux:
[hrishi@hrishi test]$
[hrishi@hrishi test]$ rm -rf classes/com/
[hrishi@hrishi test]$ cat src/com/Test.java
package com.hrishi.asdf;
public class Test {
[hrishi@hrishi test]$ javac -Xlint:all -sourcepath src -d classes src/com/Test.java
[hrishi@hrishi test]$
[hrishi@hrishi test]$ tree classes
classes
`-- com
    `-- hrishi
        `-- asdf
            `-- Test.class
3 directories, 1 file
[hrishi@hrishi test]$

There is no requirement that source code files are in the correct directory structure. If you want javac to be able to automatically compile dependent files, then the source code must be in an appropriate structure and find-able from the classpath.
Also, when you use the -d option, javac will create an appropriate directory relative to the directory specified in the -d option. That's how it is supposed to work.
So it is working as designed and specified.

Audio doesn't match video because repeated half way through

Hi guys,
I am currently editing videos from my Canon SLR with Adobe Premiere Elements (Windows).
In the same project, I have only uploaded videos taken the same day with the same equipment. I have been able to process them all normally apart from one. For some reason, when I play this file with a basic video player, everything works fine but when I import it in the Adobe software and play it either through the small window or in the timeline, I have the same problem:
Everything works fine (audio and video in sync), until it reaches a specific point (totally random as far as I can tell) when the video keeps going but suddenly the sound repeats itself from the beginning of the file (and the audio which would correspond to the video is replaced by it). For you to understand better the problem:
Video:   ABCDEF
Audio:   ABCABC
I have tried opening it in a different project and somehow it happens exactly at the same point.
I am totally clueless of what it comes from and getting really frustrated!
Any idea?
Cheers
Babs

Hello, I'm new to using forums like this. Is it appropriate for me to post that I'm having the same issue? Also sounds similar to Audio doesn't match video because repeated half way through as well.
My situation is:
Win7 64-bit, i7 920, 2.67GHz, 8GB RAM
Multiple Nikon D7000 video clips I've taken play back fine except for the following clip. In Windows Media Viewer, I have no problem, but in PE10, in the timeline editor, this clip repeats the audio from the beginning starting about 6 minutes into the video. I have Quicktime version 7.7.5 installed which I noticed was mentioned as a possible culprit in the other thread.
I've been using my camera primarily for stills, but decided to have my mom tell her story before she wasn't able to. I'm so frustrated with this problem because I know the audio is just fine since I can play it back synchronized throughout the entire clip in WMV. I've tried cleaning out PE caches as best I can figure them out and created new projects without any better luck.
Any help would be greatly appreciated. I'm open to getting a new version of PE or another program if I could believe that I wouldn't run into this issue again. This seems like such a vanilla problem since all my other clips seem to be fine and this one does too on WMV.
Thanks for any help you can provide. I don't really know where else to go to figure this out.
Joel
My Premier Elements Project settings are:
Editing Mode: DSLR
Timebase: 23.976frames/sec
Video:
Framesize: 1920 x 1080
Pixel Aspect Ratio: Square Pixels (1.0)
Fields: No Fields (Progressive Scan)
Display Format: 24fps Timecode
Audio:
Sampe Rate: 48000 Hz
Output from MediaInfo
General
Complete name                            : Z:\NikonVideo\MomsStory\JDB_20140702_6537.MOV
Format                                   : MPEG-4
Format profile                           : QuickTime
Codec ID                                 : qt
File size                                : 1.46 GiB
Duration                                 : 10mn 32s
Overall bit rate                         : 19.8 Mbps
Encoded date                             : UTC 2014-07-02 18:22:46
Tagged date                              : UTC 2014-07-15 03:24:05
NCDT                                     : NCTG
Video
ID                                       : 1
Format                                   : AVC
Format/Info                              : Advanced Video Codec
Format profile                           : [email protected]
Format settings, CABAC                   : Yes
Format settings, ReFrames                : 2 frames
Codec ID                                 : avc1
Codec ID/Info                            : Advanced Video Coding
Duration                                 : 10mn 32s
Bit rate                                 : 18.3 Mbps
Width                                    : 1 920 pixels
Height                                   : 1 080 pixels
Display aspect ratio                     : 16:9
Frame rate mode                          : Constant
Frame rate                               : 23.976 fps
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bits
Scan type                                : Progressive
Bits/(Pixel*Frame)                       : 0.368
Stream size                              : 1.35 GiB (92%)
Language                                 : English
Encoded date                             : UTC 2014-07-02 18:22:46
Tagged date                              : UTC 2014-07-02 18:22:46
Transfer characteristics                 : BT.470 System M
Matrix coefficients                      : BT.601
Audio
ID                                       : 2
Format                                   : PCM
Format settings, Endianness              : Little
Format settings, Sign                    : Signed
Codec ID                                 : sowt
Duration                                 : 10mn 32s
Bit rate mode                            : Constant
Bit rate                                 : 1 536 Kbps
Channel(s)                               : 2 channels
Channel positions                        : Front: L R
Sampling rate                            : 48.0 KHz
Bit depth                                : 16 bits
Stream size                              : 116 MiB (8%)
Language                                 : English
Encoded date                             : UTC 2014-07-02 18:22:46
Tagged date                              : UTC 2014-07-02 18:22:46

Index block dump: "header address" doesn't match rdba

I did a dump on index leaf block, and I found "header address" doesn't match rdba, what's the "header address"? I also found several leaf blocks have the same "header address".
buffer tsn: 11 rdba: 0x1684d120 (90/315680)
========> 0x1684d120 (1)
header address 4403265988=0x1067481c4
========> 0x1067481c4 (2)
*** SERVICE NAME:(SYS$USERS) 2009-08-04 04:37:36.335
*** SESSION ID:(14234.24426) 2009-08-04 04:37:36.335
Start dump data blocks tsn: 11 file#: 90 minblk 315680 maxblk 315680
buffer tsn: 11 rdba: 0x1684d120 (90/315680)
========> 0x1684d120 (1)
scn: 0x0324.dda9ec3d seq: 0x01 flg: 0x04 tail: 0xec3d0601
frmt: 0x02 chkval: 0xeb2a type: 0x06=trans data
Hex dump of block: st=0, typ_found=1
Block header dump: 0x1684d120
Object id on Block? Y
seg/obj: 0x7ca10 csc: 0x324.dda9ec3d itc: 17 flg: O typ: 2 - INDEX
     fsl: 0 fnx: 0x1684cf72 ver: 0x01
Itl           Xid                  Uba         Flag Lck        Scn/Fsc
Leaf block dump
===============
header address 4403265988=0x1067481c4
========> 0x1067481c4 (2)
kdxcolev 0
KDXCOLEV Flags = - - -
kdxcolok 0
kdxcoopc 0x90: opcode=0: iot flags=I-- is converted=Y
kdxconco 2
kdxcosdc 5
kdxconro 0
kdxcofbo 36=0x24
kdxcofeo 7672=0x1df8
kdxcoavs 7636
kdxlespl 0
kdxlende 0
kdxlenxt 373579108=0x16445d64
kdxleprv 377801347=0x1684ca83
kdxledsz 0
kdxlebksz 7672
----- end of leaf block dump -----Thanks,
Daniel

Hi user646745
You didn't say why you need to do index block dump ?
Also take are that block structures and dumps some time are different from a ver to ver it 9i and 10g. Unless you now what exectaly you are looking for
Thanks

MPLS TE with Multilink PPP failed

I have a problem setting MPLS TE in multilink PPP.
I setup 2xe1 PE to P connection using multilink PPP. Configuration for MPLS TE had been completely setup.
Tunnel MPLS was terminated at interface multilink at both end and also the rsvp had been attached to these interfaces.
PE1 ==== MPLS CORE --- PE2
The configuration seems like this:
mpls traffic-eng tunnels
interface Tunnel100
ip unnumbered Loopback0
tunnel destination 103.23.4.2 tunnel mode mpls traffic-eng
tunnel mpls traffic-eng autoroute announce
tunnel mpls traffic-eng priority 0 0
tunnel mpls traffic-eng bandwidth 100
tunnel mpls traffic-eng path-option 2 dynamic
tunnel mpls traffic-eng record-route
interface Multilink20
description MultiLink to 7513 Gandul
ip address 103.23.4.13 255.255.255.252
ip ospf authentication-key 7 xxxxx
ip ospf hello-interval 5
ip ospf dead-interval 15
mpls label protocol ldp
mpls traffic-eng tunnels
tag-switching mtu 1512
tag-switching ip
ppp multilink
ppp multilink interleave
no ppp multilink fragmentation
multilink-group 20
ip rsvp bandwidth
end
interface Serial3/0:0
no ip address
ip load-sharing per-packet
encapsulation ppp
fair-queue 64 16 48
ppp multilink
multilink-group 20
interface Serial3/1:0
no ip address
ip load-sharing per-packet
encapsulation ppp
ppp multilink
multilink-group 20
With this config the signalling stay down.
Name: PE-CLG-72_t100 (Tunnel100) Destination: 103.23.4.2
Status:
Admin: up Oper: down Path: not valid Signalling: Down
path option 2, type dynamic
Config Parameters:
Bandwidth: 100 kbps (Global) Priority: 0 0 Affinity: 0x0/0xFFFF
Metric Type: TE (default)
AutoRoute: enabled LockDown: disabled Loadshare: 100 bw-based
auto-bw: disabled
Shortest Unconstrained Path Info:
Path Weight: UNKNOWN
Explicit Route: UNKNOWN
History:
Tunnel:
Time since created: 1 hours, 4 minutes
Path Option 2:
Last Error: PCALC:: Local system ID has not been set
Thnks for any response.

hi ,
i have been troubleshooting the same issue for the last 2 days , i go the same message
*Mar 2 02:06:34.973: TE-PCALC_PATH: get_path: system_id not initialized!
R6#show mpls traffic-eng tunnels
Name: R6_t1                               (Tunnel1) Destination: 1.1.1.1
Status:
    Admin: up         Oper: down   Path: not valid   Signalling: Down
    path option 10, type dynamic
Config Parameters:
    Bandwidth: 0        kbps (Global) Priority: 7 7   Affinity: 0x0/0xFFFF
    Metric Type: TE (default)
    AutoRoute: disabled LockDown: disabled Loadshare: 0        bw-based
    auto-bw: disabled
History:
    Tunnel:
      Time since created: 1 days, 17 minutes
    Path Option 10:
      Last Error: PCALC:: Local system ID has not been set
R6#
i am using ISIS as routing protocol , I dont know if is a bug with GNS3 or something is wrong with my config wich i dont think so !!
can anybody help me please !

Server name SSL does not match subject of certificate Server-Cert

Sun Java System Web Server 7.0U1 B06/12/2007 22:13
We see the following warning in the startup log everytime. We have been ignoring this for awhile now since SSL is working fine and browsers don't complain. But recently we found some mobile browsers are not happy with our SSL pages. So we are thinking this may be the casue.
warning ( 3256): CORE1251: On HTTP listener http-listener-2, server name SSL does not match subject "www.ourdomain.com" of certificate Server-Cert.
What does this warning really mean? Do we need to rename the server name "SSL" to match the domain name?
Thanks

AFAIK That warning is a result of the fact that the hostname doesn't match the certificate.
The cert has a Common Name (CN) attribute of the certificate's Subject Name or Subject Alternative Name (SAN) of type DNS name
should match with the server's DNS name.
hostname == machines name
I don't know if we need to change the instances server name as well.
I will try on my machine and and will let you know.
Are you sure this warning is the source of your problem? Look at what Joe has written :
"If most of your users are not getting browsers complaining of a mis-match then this is likely not the source of your mobile device problem."
Which mobile model and browsers are you getting complains from? We can try testing it here.

RAS access via multilink PPP

I need to establish RAS access to my network via an ISDN PRI line. Most users will be single POTS line users but I'll also need to allow bundled POTS line users via Microsoft multilink PPP. I'm planning to order a Cisco 2811 to handle this using a NM-1CE1T1-PRI module for the PRI and a PVDM2-24DM for the calls. Will this setup handle my requirments?

I have 20 leased line with 256 kpbs sharing on 2 E1 links on the module NM-1CE1T1-PRI (1-Port Channelized E1/T1/ISDN-PRI Network Module).
Now we are migrating those 20 line to 2 mbps leased line, i wanted to know that using PVDM can i used the existing 20 lines as backup isdn line ?
We use RAS for dialup and want to remove RAS device so my question is can i use the cards mentioned above so that 20 locations can dial in with on the present E1 card without using patton RAS?

Multilink PPP bundles - "name routerX doesn't match"

Similar Messages

Maybe you are looking for