Multiple desktops in Windows

Hi,
We all know Linux has it, but Windows doesn't.
Well there is a nice German bloke that wrote a very good tool to solve this in Windows.
http://www.dexpot.de/index.php?lang=en
The program is free for private users and works very well.
Enjoy!

I'd also like to add that we can scan to a network folder from the device to a server share across the VPN, so there aren't any NAT issues, however we do need the TWAIN interface to the PC to work for direct scanning into one of our software packages.

Similar Messages

Multiple Desktop Windows suddenly not available how do I fix this?

I changed one preference in MIssion Control System Preference - - assigning Dashboard to F5. I then noticed that when I open mission control it shows only Dashboard and 1 application desktop. Also the ways of accessing desktops have been limited to control up arrow and control down arrow. I used to be able to assign control 1, control 2, etc. or control left arrow control right arrow. How do I regain multiple desktops and more ways of accessing them? I'd be most appreciative of any insight or help. Thanks.

Try a restart.
Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode

Multiple Desktops

Really like the multiple Desktops. @ 1st thought it was much like Alt-Tab or hovering across Taskbar, basically, another View/Select approach. In 7 (& 8) would run more than one tabbed browser grouping related sites in each. This
does that and on a higher level. Can EASILY be done by 'family' or even if different sign-ins are required. Can be put to good use, keeping things nicely organized & the Desktop, et al, neat, clean & uncluttered.
Just wanted to reiterate what a cool feature I find this to be of Windows 10. IT is so nice how related things can be grouped together making the experience slick, neat, tidy & very organised & uncluttered... not having a bunch of stuff all mixed
up together on one Desktop. Microsoft calls it "Virtual Desktops". For example, I have one w/ Skype, Outlook, Calendar... another w/ all IT stuff.... another w/ Home page & whatever & another w/ sites devoted to a singer/song-write
of particular interest to me. Anyway, you get the idea and certainly can be configured however YOU fancy. You simply open one, put what you want in it, hit the + sign & open another, fill it and so on. I am not sure, yet, as to how many
one can have but, a few, @ any rate.
10 sure is easy to use. Makes such a nice difference not having 'Hot Corners', hidden things or stuff that pops out from edges. Plus, now, w/ 10 and its menu, I don't have to enable the Desktop Toolbar or create a folder on the Taskbar for Applications
and can, still, not have to change screens for anything; just be 100% on the good ole Desktop. All w/ hardly any 'learning curve'! And it sure is speedy! Certainly, non-touch PC Users should not have complaints w/ Windows 10.
Cheers,
Drew
Drew MS Partner / MS Beta Tester / Pres. Computer Issues Pres. Computer Issues www.drewsci.com

Thanks for your response. I think we might be talking about the same Desktop... If you close all your folders and applications and just have the Finder - I'm talking about that Desktop. The one that's called "Desktop" in Places. The one that in System Preferences is called "Desktop and Screensaver" and lets you place a picture of your choosing in the background. I think that's what you mean when you say it's "the background that all your windows and folder sit on." That's the Desktop I mean. (It is called the Desktop, isn't it?) The point isn't having different pictures there - that was hypothetical. At the moment I have a few folders and quicktime files sitting on my Desktop. If I create multiple Spaces - no matter which Space I open, the exact same folders and quicktimes remain on the Desktop. What I was wondering - and suspect isn't possible to do - is being able to create multiple Desktops: one that will have nothing but quicktime files waiting to be opened, one that will have nothing but folders waiting to be opened, etc. I hope this is clearer.
Message was edited by: truffaldin

Yosemite consolidating multiple desktops on dual monitors,

I have a Mac mini (mid 2010) - 2.4 GHz - 350 GB - Yosemite 10.10.2 - with dual LG monitors. Instead of using Mission Control I prefer to have multiple desktops on each monitor. I dedicate a single app to each desktop, e.g., Safari, iTunes & iPhoto on Mon1 facing Mail, Messages & Calendar on Mon2, and swipe between apps, which I find more convenient. Six numbered desktops plus Dashboard.
In Mavericks this arrangement was preserved on restart. However, in Yosemite, all apps on Mon2 are consolidated in a single desktop, the remaining 2 desktops - 4 & 5 - have migrated blank to Mon1, PLUS an additional blank desktop - 6 - is generated on Mon1. The single desktop on Mon2 is now 7. On subsequent restarts there become eight, then nine, then ten desktops, etc.
I've been up and down the settings options, tried System Help, outside searches, and even mentioned the issue in passing during an unrelated Apple Tech Support call. To no avail. I had hoped that one of the updates would resolve this. It is easily but inconveniently resolved manually, but as I mentioned this was a non issue in Mavericks.
I mentioned this problem in an earlier post, but in less detail. Has anyone else experienced or heard of this?

I did find a workaround........ that works so far....... If I put FCPX into full screen mode. Then my events dissapear!!!! But if I toggle on and off the "Window/Show Events in a separate window" menu then the Events reappear and I can swipe between desktops and all the windows behave as they should. That's a relief. The old method doesn't work but at least this one does. I hope this helps someone who is swiping like a mad man like I was.

Switching between multiple desktops while using VNC

Hi All,
Encountering a minor inconvenience with switching between desktops while VNC-ing. I frequently telecommute and VNC into my work imac, which has parallels + windows 7 installed. My personal machine is a retina macbook pro, and both my macbook and the imac have the newest mavericks installed. I will frequently have multiple desktops open on my imac, but I find that when I am VNC-ing into the imac and then open up parallels in a full window that I am then unable to switch back to my other OS X desktops unless I completely shutdown my windows VM. Normally hotkeys works for me to switch between desktops (and still works when switching from OS X window to OS X window), but it just doesn't do the trick here. I know could just configure my imac so that parallels doesn't open up in full screen mode, which would solve the issue, but I feel like there's gotta be a way to switch desktops while VNC-ing! All tips appreciated!
Thanks,
KP

Hi,
This is possible using access restrictions in Universe designer based on user login.
For eg. there is user A,B and C and three connections C1,C2 and C3.
In Manage access restrictions you have to create a three restrictions(R1,R2 and R3): one using C1,second C2 and third C3.
Apply these three restrictions to corresponding to the users. i.e. R1-->A,R2-->B and R3-->C.
So based on user login the instance will be used for same report.
In IDT , I think this can be done using Data Level Security, but the concept wil be same.
Thanks
Gaurav

The multiple desktops are gone. Cntrl/right arrow no longer works

The multiple desktops are gone. Cntrl/right arrow no longer works. Nor does dragging a window to the right.

chiefgypsy,
Spaces no longer exists in Mountain Lion. The replacement, Mission Control, has a different implementaion but allows similar results.
Mac Basics: Mission Control
About Mission Control | Macworld
CNTRL RIGHT ARROW doesn't work: Apple Support Communities

Are multiple desktops in 'Lion' totally pointless?

Having multiple desktops for different activities or jobs seems pointless if you can't open a software application from the toolbar when it is already in use on another desktop. i.e. If I need my addressbook open on my personal desktop and also on my work desktop, I can't do it. If I try the desktops flip across screen 'wham! to the desktop where the application was originally opened! No good. The only thing that comes close is to open a new 'file' on the "main" desktop and move that individual file to another desktop whilst in the Mission Control position. That says it all! It's daft... and if you close it down you cant open it again without redoing the whole mission control thing. Am I missing something here apart from my patience?

They way that I perfer to work, there are no cases where I want the OS to switch to another desktop simply because I choose to open an application that happens to already be opened on another desktop. For me, I want the application to open in the current desktop, regardless if it is already open in another desktop. I tend to have multiple applications open on a single desktop in windowed mode - where no single application consumes the entire screen. For me, out-of-sight-out-of mind applies - I need to be able to see what I have to work with.
However, some of my friends at work prefer to work in a full-screen mode, where a singe application takes up the entire screen. They are constantly switching back and forth from one application to the other, typically by pressing CMD+TAB. I guess in this context, having the OS switch from one desktop to another based on where the application is opened would make sense. But, to me that seems like a big waste of a desktop - only showing one application.
So, here is an example of my use-case. I come to work and powerup my Mac. I open Finder and Excel so that I can start working on a report. While I'm working on the report a friend comes over and asks me to help him with his report. In this case, I would prefer to switch to an unused desktop and then proceed to open the applications that I need for this new task, such as Finder and Excel (the same ones I was using for my report but now I need for my friend's report). I already have context in those applications on Desktop1 and I don't want to lose that, hence my desire to use another desktop. So, I go to Desktop2 and click on the Finder icon in the Dock. Instead of it opening a new instance of Finder on Desktop2, I'm jolted over to Desktop1 where Finder was already opened. But I don't want that - I want to keep my place in Finder on Desktop1 and open a new one on Desktop2. Sure, I can hold the CTRL key down while I press on the Finder icon in the Dock and tell it to open a new window. However, instead of it opening a new window in Desktop2, it opens it in Desktop1 while leaving me in Desktop2 and wondering where the new Finder window is. It seems that Safari works correctly in that it will open a new Safari window in Desktop2 if I hold the CTRL key down while I click on its icon in Dock. However, if I forget that, I'm transported over to Desktop1 - which I don't want.
How Firefox is handled is just weird. Lets say that I am in Desktop1 and I have Firefox opened. Then I switch to Desktop2 and now I want Firefox open in Desktop2 too. While in Desktop2 I can hold the CTRL key when clicking on its icon in Dock and tell it to open a new window. Indeed, it will open a new window - but not in Desktop2. Instead, it opens a new window in Desktop1 and I get tranported over to Desktop1. Again, not what I want.
Sure, you can blame the applications for this. But to me, the OS is the coordinator of all the resource on the system, including the applications. So, in my opinion, if it does not work consistently and and if it does not work how I expect then it does not work well.
-Rod

Multiple desktops keep switching order

I use multiple desktops (not sure what the feature is called anymore) in 10.8.2. I have about 4 of them, and for some reason, #2 and #3 keep switching places! any ideas why? I just have different browsers, a finder window, (simple stuff) in each one. no full screen stuff, nothing fancy. ARRG!

They are automatically ordered by usage. You can disable that in the Mission Control prefs.

"An internal error has occurred" message when scanning from MX922 to desktop using Windows 7

I am no longer able to scan using my MX922 connected to my desktop running Windows 7 without getting a message on my desktop saying "An internal error has occurred". I have turned the MX922 on and off, I have disconnected both the power cord and USB cable from the MX922 and from my desktop, I have reconnected the USB cable to a different port on my desktop, I have uninstalled all Canon programs from my desktop and reloaded all Canon programs with the MX922 CD, and I have restarted the desktop multiple times. I scan documents several times a week for my business. It has worked fine until today. What do I need to do to correct this problem and get back to scanning?

Hi boisseaujm,
If you temporarily disable any antivirus or firewall software that is on your computer, then attempt to scan again, are you able to scan successfully?
If this is a time-sensitive matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

SGD VDI vCenter problem accessing multiple desktops simultaneously

Hi,
I am using vCenter as a desktop provider and have created multiple flexible desktop pools in VDI. These desktops pools are then assigned to users in SGD. When accessing these desktops simultaneously through SGD either SGD or VDI gets confused and opens up the wrong desktop. When i open the first desktop from SGD it opens up the correct VM then when i open up another desktop (from a different pool) it opens up the desktop from my previous desktop pool. The name on the Java Window in which the desktop opens up corresponds to the name of the application pool i intend to open however the VM that I login to is from a different pool. I can verify from vCenter that the desktops in the various pools are correct.
Is it not possible to access multiple desktops from different pools simultaneously or is there something that is possibly setup incorrectly? Any assistance will be greatly appreciated.
The versions of SGD/VDI/VCenter are:
SGD Version: 4.5; Build: 20091119205307
Virtual Desktop Infrastructure 3.2.1 (Build 11)
vCenter Server 4.1.0 258902
ESX Server 4.1.0 26047
Thanks.

Is there a Spaces like Program for Tiger? I need multiple desktops...

Anyone know of a Spaces like program that allows me to have multiple desktops?
I am needing to run parallels in full screen mode but still have full screen access to my OS-X and it is really bugging me that when I alt-tab out of full screen parallels, I still have a parallels window sitting there...
Any suggestions would be really really great.
Thank you.
Devin

hi d
here's a few to try:
http://virtuedesktops.info/
http://desktopmanager.berlios.de/
http://www.codetek.com/
cheers

Multiple Desktop Icons in Sidebar

Here's the setup:
I have my user profile setup on a secondary (non-booting) HD named "Macintosh HD". I hooked up and booted off of an old laptop in FW Target mode, who's HD also was named "Macintosh HD." Well this caused all sorts of probs with my profile going missing upon disconnecting the laptop and rebooting. Opened up terminal and looked in /Volumes, there was listed "Macintosh HD" and "Macintosh HD1," the latter being the one that held my profile. So I created a temp user and logged in with that name, deleted the "Macintosh HD" volume, which was basically empty, renamed the "Macintosh HD1" to "Macintosh HD" and pointed my user to the profile. Logged out and back in as myself and all my preferences and what not were back in place.
Here's the only problem that I haven't been able to resolve. When saving/opening files from an application, in the sidebar, there are multiple desktops, 3 to be exact. One has a generic folder icon, the other two have the desktop icon and both actually point to the true desktop.If I open up a Finder window, there is only one desktop icon, it's just a problem in the Open/Save dialog box. How can I get it back to one desktop in the sidebar?

That works in a normal Finder window, but not in the Save/Open dialog within an application.
However, I deleted the sidebar.plist file within the Preferences folder, restarted and all is back to normal.

Firefox in Multiple Desktop

I have implemented the multiple desk top MS feature which allows me to separate different activities such as banking from general work and allows upto 4 desktops each with a separate version of Internet Explorere. However I wanted to use Firefox and have up to 4 versions of this set up with different profiles- one for each desktop by using short cuts set up with name of profile and also -no-remote- on three of the profiles.
I can set up four versions of FF running one on each desktop and they will all do self initiated queries.
However if I try to activate a link to a web site from say a document I get messgae that FF already running whether it is of not for that desk top.
Also if I try to start the Default User it always says that it is already running even if there is no copy of FF running

I start one copy in first window with -no-remote and the other three with -no-remote.
However default FF seems to be running when all the others are shut down.
My detail notes are below
Multiple versions of Firefox
As I have implemented the multiple desktop feature of Windows see http://technet.microsoft.com/en-us/sysinternals/cc817881 and this allows you to run multiple copies of Internet Explorer, but as Firefox is my preferred browser I wanted to be able to use that in any of the four virtual desktop.
Initially I had two profiles for Firefox default user and Default User.
I have changed the name on default user to fourth desktop and created three others first, second and third desktop.
I have set up now five short cuts which are set up with the name of the profile and also in three cases –no-respond
So for the first desktop I have
"C:\Program Files\Mozilla Firefox\firefox.exe" -P "first user"
for the second
"C:\Program Files\Mozilla Firefox\firefox.exe" -P "second user" -no-remote
and similar for the third and fourth
The fifth shortcut is
"C:\Program Files\Mozilla Firefox\firefox.exe" –P
and enables me to start any profile.
I can start and make enquiries on four versions of Firefox on the four desktops BUT if there is a link from a document or email an error message comes up saying Firefox is already running.
Another interesting thing is that even when all copies of Firefox are shut down and I try to start the default profile it says that it is already running.

Multiple Desktop Icons

Have any of you seen this before?
http://oz-bits.com/dl/odd-desktop.png
See the multiple desktops? Seems to get duplicated when I install things sometimes. When I open a normal finder window after an install, I can see duplicate Desktop, Applications, Documents etc, which I drag off the finder window, but when I do a File -> Open in Word or Text Edit (which is what the pic is of) those multiple desktops show up.
Any ideas? I've trashed the finder prefs file, but not sure where else to go. Thanks much.
Running 10.4.8 on a Dual 1.8GHZ G5 PowerMac with 1.5G RAM
Mac OS X (10.4.8)
Mac OS X (10.4.8)

Take a look at macjack's advice here:
http://discussions.apple.com/thread.jspa?messageID=2715273&#2715273
This problem comes up periodically, don't think anyone knows why.
Francine
Francine
Schwieder

Hey Mavericks, where did my multiple desktops go?!?

In Mountain Lion I was using a second monitor connected to MBP, and would have multiple desktops open and could swipe through all of the desktops with left & right gestures. It worked great. Now I upgrade to Mavericks and I'm no longer able to do this???
Now in Mavericks, the second display is a static display, while the MBP is the only display that's able to swipe between multiple desktops.
Is this the way it works now, why?? Please bring back multiple desktops.
Thanks.

You can setup as many desktops/spaces as you like and if you are using multiple displays, they can have their own separate desktops too.There are a couple of ways to set them up, depending how you work.
Many of Apple's apps and many third party apps have the option of Full Screen support. To use this, it is the icon in the top right of the app window of two diagonal arrows. When using that, the app automatically make its own desktop. No other app that ca share it, and nothing hides behind that app.
This implemtation is Ok, but I tend not to use it on a large display, as I don't need one app taking up my full 24" display. I do tend to use it on my 11" MacBook Air where display real estate is much more necessary.
Otherwise, you can create multiple desktops AND assign particular apps to those desktops, so they have their own desktop space. To initally create a new desktop, go into Mission Control, move the mouse cursor to near the top right corner and a '+' will appear (or just drag an app window there) and tap on the '+' and new desktop is created.
You an drag app windows to desktops within Mission Control. They should launch there from then on, but I find that function buggy in Mavericks.
If you assign an app to a desktop using the Dock, Control-click the app icon and select Options > Assign to Desktop (of your choice) then that app will always open on that desktop.
Going between desktops is easy, go to Mission control and click on the desktop at the top, or gesture on a trackpad using a side swipe with the number of fingers asigned in System Preferences > Trackpad, or Control-Arrow keys also works, your choice.
A

Multiple desktops in Windows

Similar Messages

Maybe you are looking for