Costing Sheet in Sales Order

Hi All,
Can you please inform me why do we put the costing sheets in the Sales order under the Account Assignment TAB,
How does this Cost Sheet affect the Cost of the Product,
Please inform the Sales order costing cycle if possible...
Regards
Ashwin

Costing Variant is assigned to Requirement class
Requirement class is assigned to Requirement type
Requirement type is assigned to Planning Strategy
Planning strategy is assigned to strategy groups
Strategy group is assigned to MRP3 tab in Material Master
System picks the costing sheet in requirement class
In this way product will be costed for Make to Order sale order costing.
Srinivas

Similar Messages

Selection of Costing Sheet in Production Order

Hi friends,
I have one query, details of which are as follows.
Costing sheet in Requirement Class - Blank
This requirement class assigned to Requirement type which was derived in Sales order through Material master and hence Costing sheet in Sales order is blank.
Costing Sheet in Valuation variant (Plan) is Z0010 which is assigned to Costing Variant (Plan). It was assigned to Order type.
Costing sheet in Valuation variant (Actual) is Z0020 which is assigned to Costing variant (Actual). It was assigned to Order type.
I have created a new Valuation variant T01 in which Costing sheet is blank. It was assigned to a Particular Plant.
When i am creating the Production order with reference to the Sales order in that Particular plant, system is deriving the Costing sheet as per Valuation variant (Plan) which is common instead of picking from the plant specific valuation variant.
So, its calculating overheads and is impacting our Goods receipt valuation (In this plant, GR Valuation is as per Plan cost of the Production order).
I tried different combinations, and finally observed that it is picking the Costing sheet from the valuation variant (Plan) which is common and not Plant specific.
Is this system behavior correct as per SAP Standard?
Kindly advise on the same
Regards
Madhusekhar Gupta G

Hi Madhu
1. Production order gets coating sheet from the valuation variant assigned to order type
2. The valuation variant that you assign to Plant is for standard cost estimate only
3. For your case, create a new costing variant without costing sheet and assign the same to the order type for this plant
You can assign different costing variant to the same order type per plant
Br. Ajay M

Cost Analysis by Sale Order

Hello,
I'm seeking to enable in BI a Cost Analysis Scenario with repect to the Sales Orders. That is, something similar to the analysis you can easily perform in the R/3 area Accounting -> Controlling -> Product Cost Controlling -> Product Cost by Sales Order.
For instance in standard report KKBC_KUN, you can choose a sales order number and get all the cost elements related to that sales order, with the corresponding costs.
I have examined the following objects provided by the BW's Business Content:
- InfoCube 0PC_C01: it contains only the costs related to production orders, and not the costs associated with sales orders.
- InfoSource 0CO_OM_CCA_9: it seems interesting, in fact it delivers some header and line item data of the Controlling Object Document. Unfortunately it doesn't deliver the crucial characteristics Controlling Object and Controlling Object Type, which I definitly need for enabling my analysis scenario!!
(By the way, are these 2 characteristics delivered by the BC? There exists a 0COSTOBJ characteristic, but it's not used by any object in the flow afterwards. Moreover, I can't find a standard DataSource in R/3 which I can use to load either its attributes or its texts, and see what data enter it..)
Business Content for Product Cost by Sales Order), but none could help me.
It seems really weird that it's not possible to carry out a Cost Analysis by Sales Order in BW, so if anyone has some suggestion it'll be very appreciated indeed.
Thanks & Regards, Davide

I eventually found the following SAP Note. No BCT for this analysis scenario....
Note 584791 - BW-BCT-CO: Costs not extracted on sales orders
Symptom
In R/3, costs are posted directly to sales orders. The costs have to be analyzed in the BW system. In the standard system, however, this data is not extracted into the BW system.
Other terms
0CO_OM_OPA_1; 0CO_OM_OPA_6
Solution
1. There are currently no DataSources for costs on sales orders in the standard BW Business Content. Unfortunately, there are currently no resources scheduled for a new development in this area either.
2. Therefore, the DataSources and the Business Content must be created in the customer project within the framework of consulting as a customer solution concerning the generic extraction options of the BW Service APIs or function modules you have programmed yourself for extracting data.
3. Technical background information about costs on sales orders:
The transaction data is available in the following R/3 tables
COSS and COSP - Totals records or COEP - Line items.
This concerns records for the VB* object numbers.
The master data of the sales orders is contained in the VBAK and VBAP tables.
The 0CO_OM_OPA_1 and 0CO_OM_OPA_6 DataSources only extract costs for orders with master data in the AUFK table. These types of requests always have OR* object numbers. Therefore, these DataSources cannot be used for sales orders.
However, you may be able to assign requests from the AUFK table (for example, maintenance orders or production orders) to a sales order through the AUFK-KDAUF table field.

Sales Order Report Showing Cost on the Sales Order & total invoice dollars

I am looking for a report in SAP that shows you the Sales Order number, the cost on the sales order (NOT the average cost) the actual cost on the sales order detail line and then the total invoice dollars in month to date and year to date?
Thanks,
Linda

You can use T.code: COOIS if Product Costing has been configured for MTO scenario whcih gives the costing details.
You can also use To.code: KE30 if CO-PA implemented.
but if you want to link with billing, Please search for any reports in Sales information system.
One more you can create a ABAP Query Report using T.code: SQVI
Regards,
Anbu

Error reading material cost estimate for sales order (KE292)

Dear All,
I have an issue with billing. we are posting july month transactions, the material cost is maintained through MR21. When releasing billing document for accounting we are getting error message like"Error reading the material cost estimate for sales order "11"
Message no. KE292
Diagnosis
In Profitability Analysis (CO-PA), the system tried to valuate item 000010 of sales order 11 by reading the corresponding product cost estimate.
However, no product cost estimate could be found for this sales order item.
The system accessed product costing for product AMLFP011011XX00P using costing key YB3 as defined in the
CO-PA Customizing settings.
System Response
The system cannot process the document any further.
Procedure
Check your Customizing settings."
We cross checked with other client as a current date and we ran cost estimate through CK40N with same material. and we posted entries. Here it is working fine. but in above process it is not working. Can you pls guide me where i missed.
Regards,
Nagaraju,

Hi,
When the Costing Key is assigned to the material types in the COPA customizing, then system expects Cost estimation when billing is released to Accounts.
If you dont run cost estimation but update the material master through MR21, system will not accept as in the Costing key configuration you must have selected the Current Standard price field for the valuation.
Hence, try to run cost estimation and then do releasing.
Thanks & Regards
Ravi Kumar

How to transfer cost from old sales order (cancelled) to new sales order

Hi Gurus
I want to know, how to move cost from one sales order to another sales order.
SD created sales order before 1 month and there was production order behind this. Production was completed and all the cost was moved to sales order and also SD has raised invoice on customer. This transaction was completed.
The above order was rejected by customer due to some changes in the order. SD raised another sales order and production order was created to to additional work. Production transfered above stock (produce before on old production order) to new production order.
My problem is stock is now transfered to new production order but cost is still sitting on old sales order. How do I transfer cost from old sales order to new sales order. SD cancelled old invoice and raised new one with full value (old + new work) on new sales order. Now cost is on old sales order and revenue is on new sales order.
Please help.
Thanks

Hi
I have reverse the sales order settlement, PP order settlement to sales order and I have also done KB11N for transfering the cost to the new production order.
The only problem is I was unable to transfer labour hour confirmation as cost element used for this are not for transfering cost. If I will reverse the confirmation in PP order system will reverse material movement also which I don't want any more. Can you please tell me how to I reverse the Labour hours with out affecting goods movement?
Many thanks

Cost center in Sales Order/Credit memo request

Hi SAP Gurus,
There is a requirement from our client. They are processing Credit Memo from SD VF01 via Credit memo request. The want to assign Cost center in the line items which is greyed out at the time of processing in VF01.
I also verified in the Credit memo request in VA02 even there is no field available for to maintain Cost center in line item so that at the time of billing it can derive.
Please advice whether can we assign the Cost centers in Sales order/Credit memo request line items?.
Regards
NTH

Hi NTH,
In the standard system, the field cost center is only ready for input
if the sales document category is VBAK-VBTYP= I (that is, order without
charge). For all other order types, you can make it visible by entering
an order reason provided that the combination of the sales area and the
order reason has a cost center assigned in OVF3. To change this standard
behaviour, USEREXIT_COBL_SEND_HEADER can be used. There you can find a
short example on how to make a field visible and modificable in the
account assignment screen.
Moreover, please take into account that the account assignment to a cost
center is possible only at header level. So it is not possible to
insert the cost center at item level, you can only insert it at header
level.
The cost center determination takes place in
FV45KF0V_VBAK-KOSTL_ERMITTELN and is reading from table TVAUK.
This table can be maintained in transaction OVF3.
If you wants to be able to enter the cost center manually in the
account assignment screen (header level), you can use the user exit
FV45PF0C_COBL_SEND_PBO_VBAK (SAPMV45A) - there you can find a short ex
ample on how to make a field visible and modifiable in the account
assignment
I hope that this information is of assistance to you. Thanks!
Regards,
Alex

Re-Cost (CK55) Marked Sales Order Line Items

My current client resets standards each quarter. They have requested to re-cost open CTO Sales Order line items and update the valuated sales order cost (EK01). I have reviewed the options available in CK55 - Mass Costing and find the processing log retrurns the following message:
   Cost estimate with status VO exists. See long text
   Message no. CK_MCSO014
   Diagnosis
   A cost estimate with the status VO already exists. This cost estimate will not be overwritten.
   System Response
   Processing continues with the next item.
   Note
   You can remove this message from the log with the customizing transaction User-Defined Error Management for Mass Costing of
   Sales Documents. The item will still not be costed, however.
Short of manually re-costing each open sales order line item. Is there a way to re-cost open CTO Sales Order Line items?
Regards,
Dewayne Wesley

I didn't realize there was a MASS Cost transaction.
Is there a MASS delete Sales order Cost estimat transaction? That would help.

How Assign Costing sheet to Purchase Order?

Dear MM,
Please Guide me How Assign Costing sheet to Purchase Order?

Hello,
For costing sheet please refer the link below:
http://help.sap.com/saphelp_45b/helpdata/en/7e/cb815e43a311d189ee0000e81ddfac/content.htm
These Costing sheets are assigned to cost elements and then to the cost center.
By using Account determination field in PO you can assign the category for cost center and assign your costing to PO.
Please refer the below link for Account determination for a PO:
http://help.sap.com/saphelp_470/helpdata/en/75/ee0de955c811d189900000e8322d00/content.htm
Hope the solution is useful
Regards,
Swetha

Costing sheet in productin order

Hi,
When we are creting production order system is not taking the costing sheet automatically. But we confiugured all the things properly. We configured order type, cost component structure, costing variant, valuation variant everything. Please guide me on default assignment of costing sheet to production order or order type.
Sateesh Kumar

Hi Sateesh,
Try this
IMG--ControllingInternal OrdersActual Postings-- Overhead Rates---- Maintain Costing Sheet and Overhead Key in Sample Orders
You enter the following in the model order:
Costing sheet
Overhead key
If you use the model order so defined as a reference order for an order type, the costing sheet entered in the model order and the overhead key are also used for this order type.
Hope this helps
Regards
Pratiksha

Plan cost of Valuated Sales order

Hello,
I am using Valuated Sales order and wanted to see the Plan cost is sales order report KKBC_KUN.
a) When i use a costing variant in the Requirement class with automatic marking, i am able to see the plan costs in the sales order report.
b) However if i dont use and costing variant in the requirement class and instead use the valuation with standard price of Make to stock inventory (with out val.strategy is checked), my sales order report does not show the plan cost.
I want to use option (b) and also see the plan cost in the sales order report. Is this acheivable.
Regards
Raghu

Hi Raghu
Valuation Indicator in Req Class and Costing fields in Req Class are independant things
You can specify valuation field as A (No Separate Valuation) and still use the Costing fields to calculate sales order cost estimate.. This will remain for info sake only
However, it does nt make sense to calculate SO Cost est if you dont use that in valuation
br, Ajay M

Sales order costing and valuated sales order stocks

SAP Gurus
Can somebody explain the key configurations and account postings in sales order costing and valuated sales order stocks in product costing using the specific tcodes.How the process moves from one configuration to the other?
Use of examples will be appreciated too
Thanks

hi rback59
Thanks for your valuable reply
i completely agree with your point regarding valuation . but want to know what is the impact of recosting of a sales order . as system only picks first goods receipt cost all the time . then what is the use of recosting ?
Thanks
Sachin

Suppress Cost Feild in Sales Order

Hi everyone,
Client wish to Suppress cost field in Sales Order, as well as in Invoice document.
I searched the SDN, and checked SHD0 for BUS2032 --> BUS2032_4440 & BUS2032_4480; but unfortunately, I haven't got any clue.
May I request you to guide - how may i acheive the same?
Is there any Enhancement work required? If so, then please guide on the same, too.
Thanks in advance
- Sumi.

Thank You Sidi and Typewriter for your responses.
Condition Type "VPRS" needs to be present and calculated. The requirement is that Condition must not be visible in Sales Order and Invoice Document or in Outputs. So, I am not sure - how much will it be applicable if I deactivate it in VOV7.
Also, the wiki shared, is not much helpful and in Technical Information, VRPS is stored in Structure, and I have not found any Table/ Field in any of the existing Screen Variants, as I have shared in my very first post.
Also, We are interested to use Standard Transactions only VA01/ 02/ 03.
I will really appreciate if one can guide, the procedure, in case, I am doing wrong.
Thanks,
- Sumi.

Costing update in sales order

they get the consumption of sales using customized transaction
actual cost is zero
user create the material master withot pricing
we ask to update the material master and they do the costing run
in material master standard costing estimate found
after they run the consumption report ,once again actual cost is zero
i chech\ked in costing status using CK11N ,std cost estimate found
is it possible to update the cost in sales order
(redetermine or recalculate the pricng in sale order)
so that my consumpotion report will update
thanks
Edited by: Suresh Kumar on Jul 26, 2011 4:59 PM

Hi Suresh,
I hope ur doing MTO Scenario.
for this u need not do standard cost estimate.
during sales order creation VA01 > extras tab > Costing. u can do costing for each customer aganist each sales order.
not for each product.
for do it u need to maintin some of the settings .Check Requirements Classes .
if u maintain Costing ID B Automatic costing and marking.
in requirement tab if u maintain these settings when ever u save sales order it calcutes sales order cost estimate and released automitically.
thanks
kareem

Cost Calculation for Sales Order Collectively

Hi,
We need to recalculate sales Order cost. We can recalculate Sales order cost in SAP T Code VA02 for individual sales order. I am having approx 1000 sales order of which cost needs to be recalculated. Can any one help me How to recalculate Cost of these sales order Collectively.
Thanks in Advance,
Pawan Kumar

Hi,
I guess you should select B (carry new pricing). Although the system would try to reprice, in fact I guess that no pricing value would be change. If this doesn't fit your requirements then SD expert should answer your question (there are some ways you can control the pricing calculation, the ultimate way is some coding under REQUIREMENTS, but I would use it as last option).
Benni

Costing Sheet in Sales Order

Similar Messages

Maybe you are looking for