Muvo TX iss
As stated in the title i have a Muvo TX (256MB). The player was working fine just 6hrs ago but now I have a File System Error. I've done a search and found many threads regarding this issue and Recovery/Repair mode. My question is, is there any possibility of recovering a few of the files that were stored on the TX?
It's not the music that i was worried about, i had some voice recordings that i did for work.
Unfortunately i didn't even get the chance to back it up. lol
Did the recordings and turned the Muvo off. Turned it on about half a day later and it was dead...
Similar Messages
-
Yeah, hi people.
I've had this awesome Creative MuVo? 5gigs for a bit, and I was superhappy with it. Untill one day it suddenly stopped, died, whilst I was listening to music...
Once home, I charged it back up, thinking it was that. Well, as I wanted to start it back up, it just froze at the <EM>MuVo?</EM> screen making a funny beeping, du-du-du-du-du sound, for a lack of better wording... I can't even shut it off, unless I yank out the battery. My computer doesn't even recognize the thing, so this is really frustrating.
So if you guys know anything to help me out here, that'd be just swell. I really need this little bugger, he was my good friend, heh.
Thanks in advance.It's not the music that i was worried about, i had some voice recordings that i did for work.
Unfortunately i didn't even get the chance to back it up. lol
Did the recordings and turned the Muvo off. Turned it on about half a day later and it was dead... -
hey I recently bought a Muvo N200 second hand. It was only the MP3, no software. So I was told that Windows Media Player works good for uploading songs on the MP3. It all works fine and dandy, BUT I cant seem to put my music into the specific files I create for the music. Anyone use Windows Media Player and/or know how I am able to put or upload the songs directly into the folder?
On the N200 you can have about 60 folders including the My Recorded Tracks and My Encoded Tracks folders. This is part of the Creative firmware. The only limitation with FAT is the number of files or folders in the root (top-level) folder. There is an explanation of this here. As long as you at least create a Music folder and put other folders inside this then you should be OK until you hit Creative's folder limit.
BTW, even without the installation CD you can get all of the Creative software from the N200 download page. This includes N200 Media Explorer and Creative MediaSource, which is a full PC Music Library program, similar to WMP. You need to use Media Explorer, CMS or WMP to transfer music you have downloaded from official music download sites - you can't just drag and drop those files using Windows Explorer.
PB -
My father has a Creative MuVo V00 which has songs on it already. The problem is when I transfer songs onto it for him I make a folder for the artist and transfer the song into the folder. The folder shows the song but when I try removing the mp3 player safely it always fails. So I pull it out of the usb port and then turn the mp3 player on and look for the new folder I made. The folder is not there even though when you look at it on the computer it's there. The odd thing is that if I put a new song in an original folder the song plays on the mp3 player. Any help would be great.
Using Creative Mediasource (newest version updated through program) with Windows XP.I just use Windows Explorer to organize my MuVo (right click <i>Start</i> menu button, select <i>Explore</i> from the menu).
Try creating a new Folder in Windows Explorer and see if that works for you.
I just drag & drop files to my MuVo's Folders from my PC Music Library and don't bother with MediaSource.
The MuVo line is pretty basic (which I like as it's perfect for outdoor activities) and its file system is limited in the number of subfolders that it can address.
Are you putting new Folders within the Root? -
Muvo Vidz Transcender program iss
i tried to "transcend" some .avi and .wma files, with different codecs but the program doesn't wanna transcend it..
it gives me a warning saying "Transcoding faild. Can not find required codecs.", can anyone please help me out?
is there any other way to transcend videos to mv4?hi jason,
i'm also getting the same error when using the transcoder. I can play the movie files using windows player, vlc and other kind of media player. I already tried it using on my laptop and desktop but still getting the error.
does anyone has a solution for this problem, maybe a third party program
thanks in advance. -
Muvo² 5GB steering Wheel questio
Hi!
One difference between the MuVo? 4GB and the newer 5GB (FM) units are the Jog Wheels:
http://www.creative.com/iss/images/corporate/artwork/wp_muvo2fm_allcolours_024.jpg
which seems to be MUCH more difficult to use than the older ones:
http://www.creative.com/iss/images/corporate/artwork/art_muvo2_prod.jpg
How practical is the new construction and how easy is it to skip just one Title forward when you have to pull the button sidewards instead of just pushing it down? I think the Volume control is also not that easy to use...
Why did Creative change the former steering Wheel which was nearly perfect?
cu
JohnThanks for your answers!
It's not possible to take a first look in a Store cause none of the Stores around my place got the 5GB Version of that unit. They have ALL Creative Players except the new MuVo?!
The only option is to order it from Amazon but when it has an uncomfortable steering I'd have to send it back and it's much better to avoid that course of action. So my question...
Just from the point of Design the older version looked MUCH better.
OLD:
http://www.presence-pc.com/images/creative_muvo2.jpg
http://www.tomshardware.pl/technews/images/2004006-muvo2.jpg
NEW:
http://www.veryol.com/bigcneditor/UploadFile/2005424358339.jpg
http://www.cgtimes.com.cn/upload2004040/04207092373870.jpg
And why got the new model a light for the play button which vastes a lot of energy?:
http://www.beareyes.com.cn/2/lib/20042/04/05/chuangxin005.jpg
cu
John -
Variável ISS - PLD Nota Fiscal
Boa Tarde,
Meu nome é Juliana Sanna e sou da Zethos Consulting. Preciso da ajuda de vocês no seguinte item:
Estou gerando o PLD de uma nota fiscal de serviços e nao consegui localizar a variável para o valor do ISS - não o retido mas o que é calculado pelo código do imposto ISS.
Já pesquisei no documento How to Modify Nota Fiscal Report e também no SAP Notes nao consegui localizar.
Obrigado
Juliana Sanna
Edited by: Rui Pereira on Dec 10, 2008 10:28 AMBoa Tarde Juliana
As variáveis que se encontram no documento que referiu são às únicas disponíveis atualmente para a localização Brasil.
Sugiro que criei no forum como referido na nota SAP 1028874 uma solicitação para o efeito.
Paulo Calado
SAP Business One Forums Team -
Venda de Serviços com valor de ISS no Gross Up
Olá pessoal, uma dúvida.
O cliente vende exclusivamente serviços, apliquei as notas 1706309, 664855, 747670, 852302, 916003 e 815720.
Efetuei testes para Cofins e Pis e está calculando muito bem. Porém o erro está no cálculo do ISS quando utilizado o modo Gross Up (Imposto fora do preço) pois ele altera o valor da ICMI.
Estamos usando a TAXBRA e a RVABRA padrão.
Criei o Tax Group 50 e todas as sequencias de acesso de ISS para provedor foram atualizaras como este grupo que foi configurado da seguinte forma:
Jurisdict.Code: SP
Valid from/to: 01.01.2014 até 12.31.2999
Company Code: ZXXX
Tax Rate: 5
Tax Base: 100
Iss Law: IS0
Tax-Rel.Loc.: 1 Provider
Iss WT: X
Min. Value: 5.000,00
Currency: BRL
Veja o detalhe das condições para o cenário abaixo:
Se eu coloco um preço líquido de 1000,00, com Tax Code I9 (ISS+COFINS+PIS+WHT) e Cofins sendo 7,65%; PIS sendo 1,65% e ISS sendo 5% (Empresa de Lucro Real na cidade de São Paulo) as condições ficariam assim quando utilizo cálculo dos impostos por dentro do preço líquido (Tabela J_1BKON1V)
BX70 COFINS Base: 1.000,00
BX72 COFINS Amount: 76,00
BX80 PIS Base: 1.000,00
BX82 PIS Amount: 16,50
BX50 ISS Base: 1.000,00
BX51 ISS Amount: 50,00
IBRX: 1.000,00
ICMI: 1.000,00
Net Price: 857,50
Tax: 142,50
Entendo que o cálculo acima está perfeito para imposto por dentro, porém vejam como fica quando altero para calcular por fora:
BX70 COFINS Base: 1.157,03
BX72 COFINS Amount: 87,93
BX80 PIS Base: 1.157,03
BX82 PIS Amount: 19,09
BX60 ISS Base Provider: 1.157,03
BX62 ISS Amount Provider: 57,85
ICMI: 1.157,03
IBRX: 1.157,03
Net Price: 992,16
Tax: 164,87
Neste caso, a ICMI assumiu o valor de 1.157,03. Entendo que o Net Price deveria ser 1.000,00 (Já que é o preço líquido sem impostos) e o Tax deveria ser 166,18. Veja como cheguei neste valor de Tax:
Fiz a fórmula de Gross Up sendo: 1-([ISS+COFINS+PIS]/100) ou seja 1-([5+7,65+1,65]/100) daí evolui para o seguinte resultado: 1-(14,25/100) resultando em 0,8575. Logo peguei o preço líquido de 1.000,00 e dividi por 0,8575 que dá 1.166,18 logo, o total de impostos é 166,18 e o preço líquido é 1.000,00.
Sendo assim, no meu entendimento as condições deveriam ficar assim quando o imposto é por fora:
BX70 COFINS Base: 1.166,18
BX72 COFINS Amount: 88,63
BX80 PIS Base: 1.166,18
BX82 PIS Amount: 19,24
BX60 ISS Base Provider: 1.166,18
BX62 ISS Amount Provider: 58,31
ICMI: 1.166,18
IBRX: 1.166,18
Net Price: 1.000,00
Tax: 166,18
Alguém saberia como resolver este problema? ou seja, alterar a configuração para que ao invéz de calcular conforme o texto em vermelho fique igual ao texto azul?
Obrigada
FernandaPessoal,
Achei o erro, o problema está na retenção. Dentro do grupo 50 eu exclui os campos:
Iss WT: X
Min. Value: 5.000,00
Currency: BRL
Então a pricing retornou corretamente.
Vamos verificar todas as notas de retenção para corrigir o problema.
Obrigada
Fernanda -
Boa tarde,
Gostaria de uma ajuda para entender melhor como funciona esse tipo de NFE - ISS para o distrito federal.
Realizei leitura de alguns tópicos, mas ainda não ficou claro.
Deverá ser criado uma nfe com um item de serviço (modelo 55)?
Essa nota no sap deverá ficar como nfe normal(marcado na j1b3n como nfe) só que com um item de serviço?
O envio para a (Mensageria)SEFAZ será feito por um xml padrão nfe (normal modelo 55), existe alguma tag nova para esse serviço?
Obrigado desde já.
AmandaBom dia Danilo
a SAP tem um acordo com a Skill que esta vendendo esse Add-on e sao eles que dao o suporte.
se precisar de contatos, fale com o Carlos Hernandez primeiro.
Um abraco
Rui Pereira
Euipe de Moderadores SAP Business One -
Pessoal,
1. Criei um IVA com ISS, marcando estas condições
Cód IVA Denominação do IVA Tipo de imposto Cálculo de imposto: utilização de material Serv
S1 Serviço ISSIRRFCSLL/PIS/COF CSRF+INSS V Input tax 2 Consumption X
ISSA ISS at Provider ISSP NVV
ISSB ISS WHT At Provider ISSP ISW
ISSE ISS at Service Loc ISSS NVV
ISSF ISS WHT at Service Loc ISSS ISW
ISSG ISS Offset ISSP NVV
2. Criei um grupo de exceções marcando ISS e WT
LOC_SE Local do fornecimento de serviços
NBM NCM Code
3. Preenchi a tabela J_1BTXISS para o grupo de exceções:
Cód.domicílio fiscal RS 4314902
Válido desde 08.08.2008
Válido até 08.08.2088
Local do forneciment RS 4314902
NCM Code 31022100
Taxa de imposto 2,00
Base do imposto 100,00
Lei ISS
LocalRelevImp.
ISS IRF : X
Valor mínimo 0,00
Moeda
4. No cadastro de fornecedor indiquei as condições de Imposto ret.na fonte para o ISS marcado como sujeito.
IS SA
5. Criei um pedido com o IVA de ISS, porem no pedido não identifica a alíquota.
BASB Base Amount 90,75 BRL
Ext. calculation 90,75 BRL 1 90,75 BRL
Level 200 90,75 BRL 1 90,75 BRL
Level 300 90,75 BRL 1 90,75 BRL
Level 500 90,75 BRL 1 90,75 BRL
Other taxes 90,75 BRL 1 90,75 BRL
PIS, COFINS, ISS 90,75 BRL 1 90,75 BRL
ISSA ISS Prest/Prov Servi 100,000 % 0,00 BRL
ISSB ISS Retido Provedor 100,000 % 0,00 BRL
ISSE ISS no Loc Execução 100,000 % 0,00 BRL
ISSF ISS Ret Local Execu 100,000 % 0,00 BRL
ISSG ISS Offset 100,000 % 0,00 BRL
6. Criei a fatura e não determinou o ISS
No caso de que na fatura indique manualmente para o Imposto ret.na fonte IS SA uma alíquota manual, o sistema si contabiliza.
Alguém sabe o que é que está faltando?
Grata ,
eloConseguir resolver aplicando a nota.
804717
ISS WHT Not Determined -
J1B3N - Chave de Acesso - Iss. Tipo, não aleatória. & Verifique dígitos
Na transação J1B3N, após digitar o número do documento e na tela de exibição de um nota fiscal -> na guia dados NF-e -> entre todos os campos para a chave de acesso, só vejo três campos (Iss. Tipo, de números aleatórios e Check Digit) estão em modo de mudança (não cinza).
Você poderia por favor me ajude a responder as perguntas abaixo,
1> Como podem estes três campos podem ser mutável em NF-e operação de exibição?
2> falto quaisquer notas OSS?
obrigado,
Adv
Edited by: adv fico on Sep 14, 2011 6:22 AMBom dia Adv,
Em linhas gerais, estes campos devem ficar cinzas para as notas de emissão própria pois o sistema as controla (numera), apenas devem estar abertos para notas emitidas pelos fornecedores e cadastradas no sistema.
Dicas:
- Use a transação J1B2N (alteração) para testes.
- Faça o teste numa NF-e com formulário e outra sem (com formulário indica que é da empresa, sem formulário indica que é externa).
Atenciosamente, Fernando Da Ró -
Retenção de ISS na Venda de Serviço
Boa tarde
Estou utilizando ECC 6.0 e TAXBRA, preciso configurar a retenção do ISS pelo cliente na ordem de venda de serviços.
No esquema de cálculo o sistema já está reconhecendo a alíquota do imposto e a retenção identificado pela condição ISVG.
ISVB Taxa ISS fornecedor 3,000 % 0,30
ISVC Base ISS fornecedor 100,000 % 10,00
ISVD ISS lei fornecedor 100,000 % 10,00
ISVF ISS imp.local forn. 1,000 % 0,10
ISVG ISS retenção forn. 100,000 % 10,00
ISVH ISS ret.mínima forn. 0,01 BRL 0,01
O problema é que logo mais abaixo no esquema de cálculo entendo que o sistema deveria preencher as condições BX64 (base retenção) e BX63 (montante da retenção), mas não está fazendo isso.
O interessante é que o ISS não está sendo adicionado ao preço e isso está correto, mas precisaria dos valores que foram retidos para trasnferir para nota fiscal. Para a venda onde não tem retenção a pricing está funcionando corretamente.
BX60 BR ISS base forn. 0,00 BRL 0,00
BX61 BR ISS base is.forn. 0,00 BRL 0,00
BX64 BR ISS base ret.forn BRL
BX65 BR ISS base RetIsFor 0,00 BRL 0,00
BX6A BR ISS base serv. 0,00 BRL 0,00
BX6B BR ISS base is.serv. 0,00 BRL 0,00
BX6E BR ISS base ret.serv 0,00 BRL 0,00
BX6F BR ISS base RetIsSer 0,00 BRL 0,00
BX51 BR: montante de ISS 100,000 % 0,00
BX62 BR ISS montante forn 0,00 BRL 0,00
BX63 BR ISS mont.ret.forn 0,00 BRL 0,00
BX6C BR ISS mont.serv. 0,00 BRL 0,00
BX6D BR ISS mont.ret.serv 0,00 BRL 0,00
BX6O BR ISS offset Tx Inc 100,000- % 0,00
Alguém que já configurou e puder me ajudar agradeço.
Atenciosamente,
EmersonOlá Fernanda, tudo bem?
Em meu sistema o flag está marcado também e o sistema está fazendo a retenção, porém não preenche o valor da retenção nas condições, o valor mínimo está com zero também.
No caso de retenção o sistema deveria preencher as condições abaixo.
1) Com retenção alíquota do fornecedor
O sistema deveria preencher as condições BX64, BX63
2) Com retenção alíquota do cliente
O sistema deveria preencher as condições BX6E, BX6D
Como não consegui resolver esse problema no standard, criei uma condição onde cadastro os mesmos parâmetros que cadastro nas tabelas de ISS na J1BTAX e amarrei uma chave de conta a essa condição, dessa forma é possível contabilizar a retenção reduzindo o valor que o cliente deve pagar, está funcionando bem assim, o inconveniente é ter que cadastrar as chaves dessa condição além da J1BTAX na VK11 também.
Já revisei as notas da SAP e aparentemente a configuração está ok, mas não funciona, já abri chamado... só que o tempo passa e não respondem! -
Registro de CTr com campo "Imposto ISS - sem cálculo ICMS/IPI" marcado
Estamos utilizando o SAP-MM-SRV na gestão de serviços. Os serviços de frete, seja ele municipal ou intermunicipa/interestadual, também estão sendo tratados nesta solução. Para frete municipal incide o imposto ISS e para o transporte intermunicipal/interestadual incide o imposto ICMS Frete. Em ambos casos pode ocorrer a retenção do imposto pela empresa tomadora do serviço. No registro do CTr-Conhecimento de Transporte (transporte intermunicipal ou interestadual) esta solução está registrando o documento fiscal como de serviço, que na minha visão está correto, porem na linha do documento fiscal o campo "Imposto ISS - sem cálculo ICMS/IPI" (J_1BDYLIN-TMISS) está ficando marcado, apesar do cálculo do ICMS.
Alguém saberia me informar como posso parametrizar o sistema para que este campo não fique marcado ?Boa tarde,
Amauri,não sei se ainda esta com este problema, mas tive a mesma dificuldade que você, e pode ser que seja útil par amais alguém. Não localizei parametrização para isto, porém no include LJ1BGF01, o sistema realiza tem a seguinte logica:
" the material is always considered a service for CT-e "1677119
lo_cte_switch = cl_j_1bcte_swf=>get_instance( ). "1677119
IF lo_cte_switch->is_cte_ctx_by_model( wbaa-model ) "1677119
= abap_true. "1677119
wnflin-tmiss = abap_true. "1677119
ENDIF. "1677119
Então no método que é chamado criamos um enhancement no final do mesmo, para alterar o valor da variável rx_is_context para false.
METHOD is_cte_ctx_by_model.
rx_is_context = abap_false.
IF is_cte_context( ) = abap_true AND iv_model = '57'.
rx_is_context = abap_true.
ENDIF.
ENDMETHOD.
Att.,
Ariel -
Bom dia,
Na J1BTAX tenho a opção "Atualizar valores propostos p/taxa impostos " aonde defino a alíquota básica de iss ex: 2,00
Quando faço um pedido de compra com as chaves de retenção informadas no fornecedor, o botão "impostos" no meu pedido de compra consegue identificar a alíquota de 2% do ISS , mas não consegue identificar uma base de calculo para o ISS e não consegue identificar as bases para a retenção.
Pq o sistema não calcula estas bases? (não queria usar exceções neste momento)
Só funciona quando eu cadastro um grupo de exceção, como por exemplo o grupo 89 indicando o domicílio fiscal do fornecedor, a alíquota, e a flag ISS IRF.
Assim o botão "impostos" no pedido de compra consegue identificar a aliquota (cadastrada na exceção) para o domicílio (cadastrado na exceção) e a flag ISS IRF (na exceção).
Gostaria de saber se é possível não utilizar a exceção, partindo apenas da alíquota básica. Assim independente do domicilio fiscal, os fornecedores sem chave de retenção não teriam as retenções. e os fornecedores com chave teriam as retenções.
Um segundo problema é quando eu não tenho que reter, e sim somente destacar o ISS na nota.
Estou tendo que criar uma exceção por exemplo grupo 89 indicando o domicilio, a alíquota e sem a flag ISS IRF marcada para que o destaque do ISS ocorra.
O problema é que não posso ter no grupo 89 o mesmo domicilio fiscal com a flag marcada e outro com a flag desmarcada.
Assim não consigo de maneira genérica, independente do município, sempre destacar o ISS caso o fornecedor não tenha as chaves de retenção. e caso tenha as chaves, reter ao invés de somente destacar.
Eu sei que eu poderia usar uma exceção por fornecedor para tratar as retenções e o destaque do iss na nota deixar nesta exceção mais genérica 89 somente pelo município, mas isso operacionalmente faz com que o fornecedor tenha que ser cadastrado informando as chaves e ainda esteja cadastrando também dentro da exceção 85 por exemplo (domicilio+fornecedor).
Alguém poderia me dar alguma ideia? Existe um jeito mais simples e mais genérico?Bruno,
Para o ISS retido não é necessário definir na J1BTAX. Você pode verificar a parte de FI na nota:
1706309 - CI BR: CBT - Condition-Based Tax Calculation Brazil(updated)
Basicamente você irá configurar as transações abaixo:
Definir bases e acúmulo da categoria
S_ALR_87003264
Definir alíquota dos códigos
S_ALR_87003617
Veja também a discussão:
Re: Service: INSS+ IR+ISS + WHT + PIS/COFINS s/ credit e para Entradas
Att. -
MuVo does not show up in "My Comput
I have an Emachines 2.92 ghz system with 024 ram running Windows XP and I <EM>do</EM> have Adminstrati've rights. I installed the software on my computer as instructed. When I rebooted and then attached the Muvo txfm to my usb port. The Muvo screen shows the moving USB icon as pictured in the instruction manual but it was NOT recognized in "My Computer".
There was something under "Control Panel" called Muvo system folder I think and when I clicked that, it said there was no dri've connected and that I should connect the dri've to the USB port. But it already was connected. I tried another USB port but the system would not recognize it from there either. It is listed in Device manager under dri'ves and there is <EM>no</EM> question mark or exclaimation mark there or anywhere in Device Mgr. but when I select the dri've to go into "Properties" the computer freezes for about 20 seconds. Then properties opens up and it says "there is no problem with this device." A window came up in my taskbar saying there was a problem with hardware installation so the device may not work properly. I disconnected all usb devices and connected the Muvo again but it doesn't show up. Then I rebooted, attached the device again but still the same problem. Then I unistalled the software and attached the device to the USB port and a window came up saying the hardware was installed and the device was now ready for use but it still is not in "MY Computer" so I am unable to access the device to do anything with it. It <EM>is</EM> in Device Mgr as "disk dri've" now. Then I deleted the device from Device Mgr and rebooted. I installed the driver update called "MStorage_PCDRV_LB__07_00_250.exe" from your website and then plugged the Muvo into the USB port again and it showed up there as Muvo TXFM but still not in My Computer listing.
I tried to install the Firmware update from your website called: "MuVoTXFM_PCFW_LF__9_0.exe" but because the Muvo doesn't show up in "MY computer" it is unable to find the device and it just hangs as it looks for the device.
OK, now I'm thinking the Muvo is a defecti've player so I plugged it into my 998 Dell computer running Windows Me. with no software installation at all and it showed up in "My Computer" in a matter of seconds. I even put a song on it from the Dell computer. So wassup?
Thanks for your help
P.S. I also did these two registry fixes allowing permissions on both (but they were already set to that anyhow) so it did not fix it:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\U SB
And also I downloaded and installed the three microsoft fixes I found on one of the many posts I read on this forum for media player and something else. I cant remember what, I am just so exhausted!Connect your player and find its entry in Device Manager. Click on Remove then disconnect player. Also select Show Hidden Devices and remove any extra entries for your player.
Go to Control Panel, Add/Remove Programs and remove the MuVo drivers, Mediasource and Media Explorer software.
Reboot PC and then re-connect player - it should be detected immediately by XP.
Another thing it might be is if you are using a front-mounted USB port on your PC - these don't always supply enough current. They allow the player to be seen but not enough to actually do anything with it.
If you choose View Devices by Connection in Device Manager with the player connected and drill down to find the entry for your player, you can look at the properties for the controller and hub that it is connected to. One of these shows the current equired and the current available.
PB
Maybe you are looking for
-
Is there any way I can see field dominance?
I have been working on a project shot in HDV1080i50. Now I need to make a 14by9 PAL master in DigiBeta format. So I create an umcompressed PAL sequence and drop the final AIC 1080i50 version of the program into it. Sending the uncompressed file off t
-
Map CDATA to Message Structure
Recently, I've been asked to map generic message data embedded in a XML body's CDATA container to a complete message structure defined in XI. When I searched on SDN, I could only find information about the other way around (wrapping XML structured da
-
Firewire bus and ethernet not working
The computer has stopped recognizing anything plugged into the Firewire ports and also does not recognize the ethernet cable. I've restarted, unplugged everything, reinstalled the system, reinstalled some specific software I need, reset the PRAM and
-
PC User Seriously Considering MacBook Pro - Advice Needed!!
Hey guys and girls, So I have been using PCs now for almost 20 years and of course Windows since the 3.1 releases. I have been using a Sony Vaio laptop for the last 3 and a half years and the poor thing is just getting slower and slower and formattin
-
Hello, I'm trying to match the variable results from a column in one table to respective cells in a list in a different table. Is this possible in Numbers? Example: test results matched to a list of students, both in separate tables. Thank you!