My daughter has the first 8gb ipod it is disabled what do i do
my daughter forgot her password and her ipod is now disabled.it is the first ipod to come out.it doesnt have camera and is 8gb
She'll need to connect it to the iTunes library she normally syncs it with and restore it. If iTunes asks for the passcode before it will let her proceed, connect the iPod to iTunes in recovery mode instead using the instructions in this Apple support document.
iOS: Unable to update or restore
B-rock
Similar Messages
-
I have the first generation ipod touch it's updated to the iOS 3.1.3. Anytime I try to download an app it says it needs to have iOS 4.3. We want to download apps for my daughter. Does anyone know of any children's apps for the iOS 3.1.3
Any joy ? I'm having same problem. Just bought two for my twins birthday and I think it was a big mistake!!!! Thanks
-
my daughter has a brand new ipod touch - latest one - she started to input a passcode then didn't finish the process then turned off ipod. she turned it back on and it is asking for a passcode - she doesn't remember what she typed. Ipod is now disabled for one hour. Can we override the disable. How do we reset passcode when we don't klnow the original. It has never been synced to Itunes. I am completely lost.
If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
If you have forgotten your Restrictions code, then follow the instructions
below but DO NOT restore any previous backup. If you do then you will
simply be restoring the old Restrictions code you have forgotten. This
same warning applies if you need to restore a clean system.
A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup. If you do not have a
backup to restore, then restore as New. -
My daughter has a brand new ipod, she has put in a passcode but can't remember the proper sequence of numbers she chose. It's brand new, less than an hour old, so it has not been synched to a computer or connected to itunes. I've tried to restore it but no luck. Please help!
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
my daughter has not used her ipod touch for 16 months and has forgotten her passcode. restore factory settings keeps failing due to a software update failure!
how can i get this ipod reset. She now has an iphone so this is going to be used by someone else in the family and should be simple to do but itunes just keeps booting it out even though it recognises that it was previously connected to our itunes account as all of the children were on my accountThat has nothing to do with an update server. Do the following:
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes -
I have the first generation ipod shuffle. I was wandering if apple can still fix them.
I have the first generation ipod shuffle. I was wandering if apple can still fix this ipod. please let me know.
Considering the cost for a new current gen shuffle, I don't think it will be an economical repair. That USB connector is connected to a very thin ribbon cable that runs up the shuffle inside the case. If its USB connector came off and is lost, that means the ribbon cable got torn off. So the shuffle will need to be disassembled and a new part (USB connector with its ribbon cable) installed. And that's significant labor.
However, if you are good at fixing small things
http://www.ifixit.com/Guide/Installing-iPod-Shuffle-1st-Generation-USB-Port/426/ 1#.T9J_ZI7wzpA
I've done it before. You'll need to acquire a broken iPod shuffle 1st gen, but one that has a working USB connector. That's the most common failure for these iPods, so make sure it is described as being recognized by the computer/iTunes or something like, "It works but the battery is dead." -
My daughter has locked up her ipod touch with a password it is telling me to connet to itunes to restore it but it want let me how do i just get so it is no longer disabled
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iOS- Forgotten passcode or device disabled after entering wrong passcode
3. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
4. iOS- Understanding passcodes
5. What to Do If You've Forgotten Your iPhone's Passcode
6. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad
7. Restoring iPod touch after forgotten passcode
8. RecBoot: Easy Way to Put iPhone into Recovery Mode - if all else fails.
Forgotten Restrictions Passcode Help
1. How to Recover Forgotten iPhone, iPad Restrictions Passcode
If this method does not work, then you will need to fully Restore your
device as New -
I have the first generation ipod touch with the ios 3.01. I cannot find a way to update the software because I can no longer download apps or really do anything with it. Please help.
The 1G iPod can only go as high as 3.1.3
-
I have the iPhone 4S and my daughter has the iPad 2. We share my Apple ID. Is there any way to stop her text messages from appearing on my phone, and vice versa? She doesn't need to be reading my texts!
no, there currently is no way of doing this. You can only create a second Apple ID.
-
Quicktime movie only has the first song in the play list. after export
when I export an album to quicktime the quicktime movie only has the first song in the play list. The slide show works in i photo with all songs in the playlist but the quicktime only takes the first song and repeats it over and over
I used the garage band method to string the songs together. Then used the mega song to play with my album. and it even exported to the quicktime movie. Thanks for the post.
-
How can I connect the first generation ipod to macbook air?
How can I connect the first generation ipod to macbook air or macbook pro? Using an adapter?
macbook air
The only theoretical solution is an USB ExpressCard adapter and FireWire ExpressCard. I don't know if anyone's actually attempted it.
macbook pro
A FireWire 400 to 800 cable or adapter, also known as 6 pin to 9 pin.
(53970) -
Were the first generation ipod touches made using lead free solder?
Does anyone know if the first generation ipos touches were made using lead free solder? For that matter, did the first generation ipod touches contain any lead at all?
Also, did the first generation ipods use arsenic free glass, or was that only the second generation on? One last question, were the first generation ipods mercury and cadmium free?The tech specs for the 1G iPod do not contain any staement oh material us. like later iPods.
http://support.apple.com/kb/SP3
The tech specs for the latest iDevice (iPhone 4S) does not mention being lead free:
http://support.apple.com/kb/SP643 -
I have two iPods, one IPod touch from the fourth generation and another one that must be from the first generation iPod nano. Can I trade them both in?
The Fourth generation- 16GB
First generation-4GBApple does not have a "trade in" program for iPods, other than the recycling program that gives you a 10% discount on a new iPod (at an Apple Retail Store).
http://www.apple.com/recycling/ipod-cell-phone/
There are some third-party (non-Apple) companies that provide compensation for old iPods. You can also sell them yourself on eBay. -
My first generation ipod touch is disabled. need help to reactavated
My first generation ipod touch is disabled. need help to reactivated
Hi noraaziz,
Thanks for visiting Apple Support Communities.
If your iPod touch only shows the "Connect to iTunes" screen, see this article for steps that can help:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
All the best,
Jeremy -
I purchased Adobe Illustrator and then downloaded it. Now it's telling me that it's expired and that I need to buy it. But that's the first thing I did. So what do I do now?
Sign in, activation, or connection errors | CS5.5 and later
Mylenium
Maybe you are looking for
-
How to move selected values in a table in one view to another
Dear Experts, In my application,I have a table populated with data.My requirement is to select a row in the table and move the selected values of the row to the next view. Can anybody tell how to do this?? Regards, Mamai.
-
Updating external address number and phone ID
I want to update external address number and phone ID when i edit a BP. I found FM BUA_BUPA_BUT020_GET to read address data from buffer.. using this i can update external address number field. but i am not able to see phone related fields in buffer.
-
Remove Message Size Restriction
Hello, Please suggest a powershell to achieve below two tasks for bulk mailboxes (in .csv), NOT for individual mailbox; 1) To apply Message Size Restriction 2) To remove Message Size Restriction, so it will utilize default Thanks
-
Configaration error during the shared servies configuration.
Hi All, I have configured the shared services, after that i want to test that. I went to http://localhost:28080/interop/ I got an error: Error: An error was encountered while performing this operation. I tried lot, like reboot the system, deleted coo
-
Upgraded iPad to iOS 7.0.3 and volume is now tooooo low
Can any one suggest a solution? I have tried all the troubleshooting that I can think of but it's no good.