MY DVD drive does not read all DVDs and also does not burn CDS properly. Often while burning a CD i am prompted that " The machine is unable to caliberate teh required Lazer Power"

Hi i am having a i MAC which has mountain lion OS 10.8.2. I am facing teh followwing issues with my disk drive
1. I am unable to read all DVDS in it some DVDS work while others do not
2. I am able to read all CD's, but while burning a CD i am prompted with the following message
" Unable to caliberate lazer power"
3. Kindly assit me in solving this problem
regards

Hi
Four thoughts
• Brand and type of DVD/CD Media
• Burn Speed ?
• Ever used a Cleaning DVD ?
• Free space on Main Start-Up Hard Disk ?
Brand and type of DVD/CD Media: MATTERS
- Memorex, NoName and other Cheap brands - most probably works for other things BUT NOT FOR VIDEO.
I only use Verbatim
- DVD-RW - usually do not work OK but with various kinds of problems. DVD+R is a more modern sort and use to give problems on older DVD-players
I only use DVD-R
Burn Speed (in iDVD or alike): Matters
• Best or Max - is not best
I set it down to x2 or x4 Max
Ever used a Cleaning DVD ?
I use one WITHOUT Liquid but with brushes from time to time
Free space on Main Start-Up Hard Disk ?
- Due to that Mac OS X - is UNIX - it behaves likewise. It needs lot's of space on Boot / Start-Up Hard Disk for it's and the applications temp files.
I never go less than 25GB free space - If HD-Video material is used then 4-5 times more is a good thing.
Yours Bengt W

Similar Messages

  • CD/DVD drive does not read all DVD formats and regions

    Hi
    My Teac-dw-224e-a does not read all DVDs formats and regions.
    It does read CDs but no DVDs at all.
    Not DVD-R and not even regular DVDs. I have checked the region of the DVD.
    I have reinstalled the driver and also tried with different software.
    What can I do?
    Please help!

    Hi
    It is possible that your DVD drive has wrong region settings.
    In this case it is not able to watch all possible DVD movies from different regions.
    Of course you can change the settings 4 times. But after this changing the settings are fixed and its not possible to change it anymore.

  • TS1369 iPhone does not appear in iTunes and also does not appear as a disk drive in My Computer (Windows XP)

    iPod does not appear in iTunes and also does not appear as a disk drive in My Computer (Windows XP)

    iPod or iPhone?
    iPhone and iPod Touch will never show as a disk drive.
    If it's an iPhone, this might help:  iOS device not detected in Windows

  • My firefox page is not connecting to network and also its not displaying the troubleshoot problems option?

    my firefox page is not connecting to network and also its not displaying the troubleshoot problem option?

    At the very least, I recommend you restart your router, (your internet box).
    More detail on your problem is needed - are you in a submarine? On the moon? On a tropical island?
    You can help yourself by providing as much info as you can about your present situation - what kind of router do you have? Have you moved it? DId you update it?  Did you do anything to change your setup, and if you did, what?

  • Dvd drive won't read/ejects dvds at a whim

    Hi all,
    My macbook dvd drive seems to not wish to play certain dvds- only a few though... when this occurs, it just tends to spit them back out at me.
    It's not a problem with the dvds, as they play on my dvd player, just not on the laptop...
    any ideas?

    Hi Peeps
    I had exactly the same problem with my Macbook, again from the UK. Really weird though as would intermittantly read DVD film's which worked fine previously.
    Well.... Took it to my local Apple store and saw a genius and anyway they replaced the super drive and logic board (surprised about the logic board!).
    But just got it back today and the DVD drive is completely fubard so is being returned tomorrow to get this sorted!
    Moral of the story, sounds like a drive or board problem. Will keep you updated when I get mine back
    Macbook 2Ghz, 512Mb, 60Gb, Superdrive   Mac OS X (10.4.7)  

  • DVD Drive won't read blank DVD+R or DVD-R media

    It just, ehm, won't. I've tried both, and I've never had any problems reading DVDs or writing CDs, though this is the first time I've tried to write to a DVD. When either disc is in the drive, the computer acts as if it's simply not there--Explorer, Nero, and everything else all act the same. Help would be greatly appreciated, because this DVD is fairly important...
    I'd be more than happy to answer any questions about the problem, if you have any.
    Thanks!
    ThinkPad T61p [June 2008]: 2.5Ghz Penryn Core 2 Duo, 4GB DDR2 RAM, NVidia Quadro FX 570m 256MB, 160GB 7200RPM Fujitsu HDD, 1920x1200 WUXGA Matte LCD, Windows 7 RC1

    it would be helpful if you could post which T-Series system you have, even better post the Type and Model Number this will help members to help you. If it ends in CTO please provide some details about it. Please do NOT post your s/n.
    Thanks
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Satellite P300-1FN: CD/DVD drive issue - cannot read game DVD

    Hi,
    My brand new Satellite P300-1FN loaded some software ok using DVD drive but now when I put any disc in it doesn't auto run but the disc seems to run up and then a pop up window informs me after going Computer -> DVD drive to get access - Burn a Disc and wants to format.
    The discs I am putting in are game DVD and other software to load but they all give the same pop up window.
    DVD drive isTSST CDDVDW-TS-L633A
    Can you help?

    Enter Control panel > "Auto play" and define what should happen if you insert Software and games media.

  • Satellite M40-145: CD/DVD drive won't read some DVDs

    Hello!
    I own a Satellite M40-145 purchased just over one year ago; the DVD driver worked perfectly until three days ago, but today I discovered something... peculiar. It still reads commercial DVDs and burned DVD+R, but apparently it doesn't read burned DVD-Rs anymore. I have tried with different DVD-Rs I burned through the same DVD player, with no success; trying to access the DVD yields a "insert disk in D: drive" message.
    In this case, I'm talking about movies on DVDs. Please tell me there's a way to solve this without sending the computer to customer service...
    I'd hate to think it broke down just days after the expiration date of the warranty.

    Hi
    Well, you can try to remove the drive form the device manger.
    After new reboot the drive should be recognized again. Check then if its possible to read the DVD-R CD.
    But the issue sounds as a lens calibration error. If you use different media the lens must be calibrated again. But if this procedure fails, the drive is not able to read or write the DVD for example.
    Unfortunately, in such cases only the drive replacement will solve this issue.

  • After SL-DVD drive won't read any dvd-ejects it after spinning some time

    Yesterday I bought the SnowLeopard DVD in order to do the update of my Mac OS.
    Right after inserting the DVD in the drive (MATSHITA CD-RW CW-8221) it started to have some problems with reading the DVD.
    The Drive has stopped recognizing/reading any blank DVD media (and many recorded DVDs, including movie discs). It spins for some time with a noise and then ejects it out. The same media works fine in my Toshiba laptop.
    I tried several times, but the drive isn't able to read the DVD and now has the same problem with other CD-Roms and DVD.
    I am very suprised (and angry) about it, especially because I hardly use the drive.
    As a lot of other people are having the same problem, there seems to be a structural problem with the drive and I think that Apple has to clearify if they are planning to do something and what.

    Mine MacBook seems to be doing almost the same thing. The SL disk spins a bit then is ejected. It does the same thing with my first SL disk and the one Amazon sent as a replacement. I had the same trouble with the 10.5 Install disk purchased retail. Apple sent a replacement Non-retail disk and it worked. I can burn DVDs and read DVDs I've burned.

  • My computer is not reading my ipod and its not showing in itunes

    my computer is not reading my ipod and it does not appear in itunes

    What have you tried so far in terms of troubleshooting this issue?  Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
    What shows on the iPod's display when it is connected? Does it still charge?
    What happens if you try to reset the device with it still connected to the PC?
    How to reset iPod
    Have you carefully worked through each and every single suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • Equium P200 - DVD drive does not read all discs

    My DVD Drive has just started reading some discs and not others, also some of the discs are not read all the time, you can put a disc in click on the dvd drive and it'll open the drive and say insert a disk, device manager says device working properly and driver upto date.
    Does anyone know what the problem is?

    Yes, terentino is right. Would be helpful if you could tell us which discs exactly work and which not. Maybe that would give the answer.
    Did you installed more than one burning application? Sometimes several installed burning applications could interfere with the other one since every application installs some kind of libraries with their own burning/driver engine to control the functions of your drive.
    bye

  • Windows 7 adobe elements 10 not reading all of dvd videos

    I am running a new windows 7 system, I am trying to read a home made video dvd into elements 10.
    but it does not read all of the video only a few frames from the begining.
    I have tried Pinnacle V15 and it has a similar issue.
    The optical drive is a blue-ray - dvd drive, so I tried a dvd-writer drive USB 2.0 attached and it also fails.
    any help?
    thanks
    Brian

    Hi,
    Copy the videos on the desktop and then try to play the videos again.

  • " DVD RW Drive " is not reading / writing DVD. It can read only CD.

    HP Pavilion dv6-3140se Entertainment Notebook PC 
    {Personal Information Removed}
    Product Number:   XS065EA 
    " DVD RW Drive "  is not reading / writing DVD.  
    The same DVD can be read on my frnds laptop. 
    Corresponding drivers r up to date.. I even tried uninstall and then restart and then let my laptop install the required driver automatically. I've tried everything I could find on some forums.
    I was told to delete " Upper & Lower filters ". I didnt find Lower filter so I had to delete only "Upper Filter".
    Plz assist me..
    I will be waiting for ur kind reply.
    Thank u so much.

    The upper and lower filter thing only applies if the drive is not showing up at all in the Device Manager. If it appears as a drive and will perform any function at all, then it is likely a hardware issue. One way you can be sure is to try to boot from a bootable DVD such as a Windows 7 install Disk. If the computer will not boot from such a disk then it is apparent the hardware is defective, not the Windows software because the problem exists even before Windows loads.
    The drive has multiple lasers and it is possible for one to go out but not the others.  The drive is easily replaced. See below:
    This eBay seller ships worldwide. You would have to transplant your plastic drive face but that is very easy to do:
    http://www.ebay.com/itm/HP-Pavilion-DV6-3000-DVD-RW-DVD-RW-Multi-Burner-Drive-TS-L633-603677-001-B-/...

  • Bootcamp woes, unable to boot from USB and DVD drive reads all DVDs blank

    My partner and I are completely unable to install Windows using Bootcamp.  We have tried dozens of solutions on the internet.
    2011 iMac (purchased in by me and my partner 2012) reads all DVDs as blank.  We have (hilariously) another Mac, an MBP, that has the same exact problem.  You'd almost think "Superdrives" eventually just stop working or something.  So obviously we can't install Bootcamp on the iMac using a DVD.
    But what about a USB stick?  Well after modifying the plist file and writing a bootable Windows USB and trying to boot from that, we were greeted with the mysterious and apparently yet-unsolved "no bootable device" error. 
    So our iMac can't boot from USB drives or read DVDs.  We've only owned it for two years.  And this is the second Mac we've owned where the Superdrive has died.  And we don't even use DVDs more than like once a year.
    But anyway, can someone tell me what we're supposed to do if we want to install Windows aside from throwing money away to buy another Superdrive that is probably going to die again in a year?  Maybe a way to make our mac boot from our USB stick?  Something?
    Thanks.

     Should you have another drive with a MBR, use it to rule that issue out. Alternatively create a GPT on the flash drive and try to boot from it.
     What options are there for the usb controller/boot priorities/order/options? Does the laptop recognize the usb flash when already in bios setup? Should there be any form of choosing the device to boot, use that with the flash drive in the socket, then switch it with the external drive.

  • HT2801 My DVD drive is not reading any DVD

    My iMac's DVD drive is not reading any DVD. Whenever I am inserting any DVD, The DVD icon is not appearing and the DVD is ejected out after sometime. I have also tried the troubleshooting steps given in the apple support site by restting the SMC but my iMac still does not read any DVD. What do I do now? Somebody help me.

    Could try purchasing a commercially available, retail dry brush CD/DVD lens cleaning system disc. These can sometimes revive a malfunctioning optical disc drive.

Maybe you are looking for

  • Firewire DV video output for DVD player?

    Hi everyone, I am just wondering, does anyone know of any way to get the DVD player program to output NTSC DV via firewire like FCP allows for external monitors? I would love a way to test my dvds without having to waste so many discs... Any suggesti

  • Double and scientific notation

    Hi, I am using a Double to store data but when i output it the value is printed in scientific notation example, 2.3333E5..I want to print it as decimal without the 'E' notation, is there a way to format it or set the precision in Java??? Many Thanks

  • Mass upload to infotype 2011

    i m new one of sap i need to do the  mass upload to infotype 2011 please help me..

  • Password protect/disable printers for certain users

    is there a way to password protect or disable a printer to prevent other users from using the printer. my sister has used up 4 ink cartridges in a month! i just realized this in when i tried to print something. GONE. thanks Brad

  • Button wont trigger output in textarea

    I am doing something wrong here and cant figure out why my second set of buttons will not give output in my textarea. I would appreciate it if anyone could help shed some light on why its not working...       public void actionPerformed(ActionEvent e