My hp laserjet 1020 plus printer is not working in network in window 98 Pl give me a solution

hiiii...

Hi Gaurav,
The printer is not compatible with Mac as you may see below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01973413&tmp_track_link=ot_faqs/top_issues/en_u...
You may try the following workaround and check if tha may work:
Download and install the following package:
http://support.apple.com/kb/dl907
Ensure the printer is powered on and connected to your Mac.
Go to System Preferences > Printers & Scanners.
Click the plus sign and select the printer.
Click the Use menu and then click on Select Software.
Select the HP Laserjet 1022 from the list and click on Add.
Now try printing using the added Print Queue.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

HP LASERJET 1020 PLUS PRINTER PRINTING PROBLEM

HI.
I AM RAJA PAUL FROM INDIA, I HAVE A HP LASERJET 1020 PLUS PRINTER , NOW A DAYS I AM FACE ING A PROBLEM , WHEN I AM GOING TO PRINT FROM THIS PRINTER , EVERY TIME PRITING LETEER SHOW Distorted characters. WHAT I DO?

Hi @rajahp ,
I see by your post that the printer is printing distorted characters. Thanks for providing the screen shot. I can help you.
It looks like a issue with the toner or possible a hardware issue with the printer or fuser.
Inspect the toner cartridge for damage:
1. Remove the toner cartridge from the product and verify that the sealing tape has been removed.
2. Check the memory chip for damage.
3. Examine the surface of the imaging drum on the bottom of the toner cartridge.
CAUTION: Do not touch the roller (imaging drum) on the bottom of the cartridge.
Fingerprints on the imaging drum can cause print-quality problems.
4. If you see any scratches, fingerprints, toner on the drum or other damage on the imaging drum, replace the toner.
5. If the imaging drum does not appear to be damaged, rock the toner cartridge gently several times and reinstall it. Print a few pages to see if the problem has resolved.
I have provided a document for cleaning inside the printer and running a cleaning page, resetting the printer and checking the driver settings. Resolving Print Quality Issues.
Try printing a document again.
Let me know the results.
What kind of paper are you using?
Try another type of paper to see if you have the same results.
Are you using Genuine HP Toner?
What is the toner level?
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LASERJET M1136 MULTIFUNCTION PRINTER-----SCANNER NOT WORKING

I HAVE RECENLTY PURCHASED HP LASERJET 1136 MFP. PRINTER IS WORKING FINE, BUT SCANNER IS NOT WORKING. HOWEVER PHOTOCOYING ACTION IS PERFECT. I GUESS THERE IS SOME ISSUE WITH THE DRIVER THING. CAN ANYONE PLEASE ASSIST ME FOR THIS???
I HAVE PREVIOUSLY OWNED DESKJET SERIES, IN WHICH SCANNING AND PRINTING BOTH WERE WORKING FINE.
THANKS IN ADVANCE.

Hi virendrapawar11,
Thank you for providing that information.
Are you signed is a the Administrator of that computer?
WIA drivers are part of Windows Operating System.
Run this Microsoft Fit It Tool to see if it will resolve this issue.
Diagnose and repair Windows File and Folder Problems automatically.
I have provided this document, just to make sure these are the same ones you had checked.
This document is to Check the Windows Image Acquisition (WIA) services.
Windows: HP Scan Software Does Not Open or Scan on a Printer Using a USB Connection.
Disregard the title.
Go to Solution three: Check the Windows Image Acquisition (WIA) services.
Temporarily turn of the Antivirus Software and try scanning again.
If the issue persists, download and try to repair the WIA drivers. If you don't feel comfortable about doing these steps, you can contact the computer manufacturer or Microsoft to resolve this WIA error.
Back up the registry first.
How to back up and restore the registry in Windows.
Restore Default Startup Type for Windows Image Acquisition (WIA).
Once the WIA is working properly agian on the computer, most likely you will have to uninstall and reinstall the printer software.
Please let me know the results.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

I have a HP Laserjet P2055dn booklet printing is not working anymore. Windows 7 64 bit

I used to do booklet printing on my HP P2055dn; a feature that I loved! Suddently thisfeature stopped and therefore I updated the driver but now it is gone for good.
Under printer properties I used to have "General Printing", "dublex", "Envelops", " Booklet" and "Defaults".but now there is only "General" and "Duplex" the rest is gone.!!!!!.
I am using Windows 7, 64 bit, Word 2010. Neither printer driver P2055dnUPS PC6 nor HP univerals PCL 6 works.
Please note that I still have all the printer properties (above) on my laptop, Win7, 64 bit Word 2007 (old printer driver).
I assume this has something to do with the compatability of Office 2010 AND the Printer driver. I could easily test this by updating the printer driver on my laptop but I am afraid to lose this feature there too. Any useful advice!!!!
Update: I installed the old printer driver and have all printer properties!! There is a problem with HP updated relased in July 2011 !!
Update: although the software shows the booklet prining and envelop option. Booklet prining is not working. So my quess is that the HP frimware update screwed everything up!!! So what do do now?

Hi,
Please update the printer driver with correct version and compatible with Windows version.
Then Open "Devices and Printers" and right click on "Printing Prefences"
Create new Printing Shotcuts as below.
Then go to the other tab Finishing and do exactly like the image.
Apply and Save.
Your Booklet printing and shotcuts is ready. now you can print.
Please let me know if this is being useful for you.

Both side print not working in network using windows 7

                           I have HP laserjet 1018 printer,Printer connected in windows 7 system.
          When i print both side print in same system is work done,but in network not work both side print,single print work good.i need help to solve this

Hi Dinesh_G,
Sorry for the delayed response. Try adding an alternate driver. Here is a link that will provide steps for that. Click Here Check which PCL driver you are currently using and add the alternate (PCL5/PCL6). Please see the below for additional clarification.
Utilize the above link for exact steps on adding the driver.
1. Check which driver currently used-PCL5 or PCL6-this will be located near name of driver in print folder or print properties
2. Follow steps provided in link to add whichever one the currently installed driver is using
     A. Select HP as manufactuer
     B. Select HP universal printing PCL 6 or HP universal printing PCL 5
3. Attempt duplex print job
Hope this helps!
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
I work for HP.

RoboHelp files not working on network in Windows 7

Hi,
my company is in the process of upgrading to Windows 7 and we have a few applications which use RoboHelp
(.chm) files for help which are stored on the network. In XP everything worked fine but now all the pages display "page cannot be found". If I copy the files down to my c: drive then they open fine. Most were created in previous versions of Robohelp so I thought that might be the problem and upgraded one to RoboHelp 7 but that didn't change anything. I read in other posts that there are some issues with RoboHelp on the network, but I can't avoid that.. Is there some network settings that can be tweaked or is this perhaps fixed in RoboHelp 8? I can't put forth a request to my boss to upgrade unless I have solid proof it will work..

Hi there
I think Colum misundersood you. I understood you to ask if this is fixed in version 8 meaning "RoboHelp version 8" not Windows 8.
The issue isn't anything really related to RoboHelp. The issue is with Windows. The fact is, for years now CHM files haven't worked when placed on network drives.
If you look at Peter Grainge's topic on the subject at ( http://www.grainge.org/pages/authoring/chm_mspatch/896358.htm ) you will see that he is linking to Microsoft Knowledge Base articles dated June 2005. So this change was initially implemented by Microsoft five years ago and you are just now encountering it.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

I cant print hp laserjet 1020 plus in domain conttroler system

hi
i have problem with hp laserjet 1020 plus printer i cant got print in doamin network.

Hi dara_sham,
Follow the steps in the document at the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00381599&tmp_task=useCategory&cc=us&dlc=en&lang...
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

How to duplex print from a MS Word document in HP 1020 Plus printer

Two days before I have acquired a HP 1020 Plus Laserjet printer . How to duplex print from a MS Word document and Corel Draw document in HP 1020 Plus printer? I tried manual duplex printing by printing the odd pages first and then even pages ....it came out correct ,...but whenit comes to Page numbers continuity it is not properly printed ....why?? Can anyone highlight on this and give me a step by step instructuion to print Duplex and thereby help me to create 20-----------page or 30 page booklets.....from MS word typed document or corel draw document......Expecting a speedy solution
thanks & regards,
K Narayanan
This question was solved.
View Solution.

@immo22269
The laserjet 1020 only has manual duplexing capabilities. Please refer to this document for a complete set of instructions.
Print on both sides of the paper (manual duplexing)
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Hp laserjet 1020 plus driver for windows 98

i want to download hp lasejet1020 plus driver for windows 98 ,on hp site win98 operating system are not available on list.
Please send me driver on my email,because still i am using win98 for some necessary work which are not supported on upper verson.

I did some research and found at one point Win 98, Win ME, and Win 2000 all used the same driver for this printer (atleast from what i could ascertain). Given that information, I would assume that the current available Win 2000 driver MAY work for Win 98 (can't be certain as I do not have a Laserjet 1020 plus to test this). Here is a link to that software if you wish to try it:
http://goo.gl/ApsrA
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

HP Laserjet 4 Plus printer driver

I need a compatible printer driver for HP Laserjet 4 Plus printer. I have Windows 7 - 64 bit.

The Laserjet 4 Plus driver is supplied through Windows Update for Windows 7. You can do the following: click Start, Devices and Printers, Add a Printer, select the correct port, Next, then select Windows Update, then select HP as the manufacturer and select the Laserjet 4 Plus.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Hp laserjet 1022 = this printer is not supported under windows 7 shares?

hp laserjet 1022 => this printer is not supported under windows 7 shares?

Yes I understand, but this printer is not installed on a network share. Always remain sown printing in the print queue. Consequently, I ask if you can type HP 1022 printer in Windows 7 share?

My HP Officejet Pro 8600 Plus printer will not recognize my wireless router passwrd

My printer was working fine but when I turned it on today it wouldn't connect to my wireless router. I try inputing the correct password and the printer gives me this message......"the WPA security passphrase configured on your HP printer does not match your wireless router setting" .
I have entered the password several times and I know what I have entered is correct

Hi @Southglen,
Welcome to the HP Forums!
I noticed that your HP Officejet Pro 8600 Plus printer will not recognize your wireless router password. I am sorry to hear this, but happy to help!
I would recommend to go through this guide, How to Find the WEP or WPA Key or Password for Your Wireless Network, just to double-check your wireless password, in case it might have changed.
I would also suggest a hard reset, by going to this post How to perform a Hard Reset, by @Rich1.
After those two steps, I would suggest a firmware update, Getting Printer Updates for HP Officejet Pro 8600 (N911), Officejet 6600 (H711) and Officejet 6700 P....
Let's start with these steps, and we will go from there!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP Laserjet 1020 plus catridge leakage, the product is under warranty, what to do? on windows xp

HP Laserjet 1020 plus catridge leakage, the product is under warranty, what to do? on windows xp

If the cartidges you were utilizing were HP cartridges, then I would contact HP @ 800-474-6836 for troubleshooting and service options.
Good luck
Brent
Good Luck
Brent
***** Please select issue confirmed on the post of the person whom recommended the solution that fixed your issue. This way future board members can quickly access the solution****

Redirect Printer is not working in windows 2008 R2 Server( Server Running as AD and Terminal Service(both role in single server))

Dear Team
i need solution from Microsoft for the issue;
My infrastructure
- Windows Server 2008 R2 (Role - AD and Terminal Service)- Updated
- Client Machine running with windows 7 pro (Updated)
- Client Using RDP Client to connect Windows 2008 Terminal Session
- All are working fine, but Redirect Printing is not working (Through Windows 7 Pro) ... (HP Laser Jet 1020 plus - attached in Client PC)
- it is working fine from Windows XP
- i was done All terminal setting in both end, also try RDP Login with Administrator User, but issue is not resolve;
What Microsoft can say about the issue;
Thanks & Regards,
VIMAL PRAJAPATI | 09824111686

Have you checked the Print Service log in event viewer?
Here's How.
I have the Microsoft XPS driver on my clients, so I use that fact to my advantage below.
Click Start Button/Administrative Tools/Remote Desktop Services/Remote Desktop Services Manager on the RDSH server
Click the Sessions tab. PC’s are listed Under Client Name by their computer name. Take Note of the corresponding
ID. We will use this to locate the Printer information in the Event Log.
In the Event Log open Application and Services Logs/Microsoft/Windows/Print Service/Admin/ and Find the Event ID 823 entry that has the corresponding ID from the sessions tab you previously noted.
This Event Log Entry is created at Logon and you can only get the session ID when they are logged in.
This tells you what client printer was mapped for the client. The name that appears is the name of the Printer that was set on the client when the printer was installed.
See if you see any errors here.
If you see Event Id 823 with the following message “The default printer was changed to Microsoft XPS Document Writer,winspool,Ne00:. See the event user data for context information.” Twice in a row with no other messages in between, and the first occurs
at the time the user logged in, then their printer was not properly redirected.
You see the Microsoft XPS driver mapped for each session prior to Easy Print redirecting the client machine’s Default Printer.
Since your printer is the HP 1020 I would bet the driver on the client does not work with Easyprint. I would try the the HP Universal Print Driver or the driver for a printer that is very close, like the HP 1018.
Thanks,
Jeremy

Printer will not work: error code 0xc19a0022

Printer will not work: error code 0xc19a0022

Hello citizenED,
Welcome to the HP Forums.
I see that you are getting the error code " 0xc19a0022 " .
I do have a few steps that we can try.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I have also located a document that deals with a 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error ...
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

My hp laserjet 1020 plus printer is not working in network in window 98 Pl give me a solution

Similar Messages

Maybe you are looking for