My husband bought ipad 6mos ago in dubai for my daughter unluckily the ipad got snatched at redeem but almost damage with the dent and got no power, what should i do?please help
my husband bought ipad 6mos ago in dubai for my daughter unluckily the ipad got snatched at redeem but almost damage with the dent and got no power, what should i do?please help. that i pad is very much important to us,only the box i have here, what should i do if they dont allow to fixed it?
You can try taking the iPad to an authorized service center in the Philippines:
https://locate.apple.com/ph/en/
but since the iPad sold in the UAE is specific to that country (the government there requires that Facetime be blocked), a Philippine service center may not be able to service your iPad. You can ask though. If they cannot help, then you would probably need to send the iPad back to the UAE for service.
Regards.
Similar Messages
-
i have a generation 1 ipod touch my wifi is not working, under setting the wifi says no wifi and is gray. i have tried resetting it and its not workin. what should i do, please help. thanks
If a restore did not fix it, you have a hardware issue--possible bad wi-fi radio.
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD -
i was upgrading my ipad, for atleast 4 hours.. the screen remains itunes.. and i dont know what to do.. please help me
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 4: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
i can't turn on my iphone after I use the Itunes.It's updating new software and then my laptop was ran out of battery life what should I do please help me
I'm having a same problem, taking my phone to genius bar tonight. Is there any virus going on??
-
my phone ran out of battery as it was updating to iOS 6. Now it is having trouble rebooting. The silver apple logo keeps showing up and fading away. And doing it all over again... What should I do PLEASE help!! My phone is NOT jailbroken.
I should mention, it was on low power as I was using it.
-
i have two security questions but i don't have a rescue email address and i know my apple id and password, what should i do please help me!!:(
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312 -
okay i updated my iphone 5 and i changed my password and now i dont remember it i cant restore my phone because my power botton does not work so what should i do PLEASE HELP!!!!!!! Thanks
Hi sigrun from mo,
If you are having a button issue on your iPhone that prevents you from doing further troubleshooting, you may need to have the phone serviced. You may find the following page helpful:
Service Answer Center - iPhone
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
Regards,
- Brenden -
No audio or sound from my ipad mini after update or any apps used? What should i do please help?
my problem is i can't hear the sounds from my ipad especially when i am playing a music or video from youtube or any game up. This happen after an update? I thought it was just an auto silent mode but unfortunately the volume limit is on full and there is no head phones attached. Please help me enable the sounds of my ipad.
Is it all browsers that you are having problems with, or is just Safari (and I assume that your last post means that other apps are ok) ?
If only Safari then try clearing its cache : Settings > Safari > Clear History And Website Data (Clear Cookies And Data on iOS 5, 6, 7 and also Clear History)
Close Safari via the iPad's taskbar (I'm assuming that your iPad is on iOS 7+) : double-click the home button to open the taskbar and then swipe or drag the Safari app's 'screen' up and off the top of the screen to close it, and click the home button to close the taskbar.
And do a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
And then retry playing the videos. -
i bought macbook air from my friend and he dont have the apple id which he used when he bought it so my window crashed and i tried to reinstall the window but i dont have the apple id what should i doo please help
The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
3. Other issues
If you see a lock screen when trying to boot from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another authorized service provider to be unlocked. You may be asked for proof of ownership.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. -
i was trying to update my iphone 5 but it got stuck on itune screen. whenever i try to restore it says error (1669) what can i do. please help
Try these troubleshooting steps.
If that Article did not resolve it... then perhaps a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is required..
Be sure to make an appointment first...
Note:
That error message may be indicative of the Device being Hacked / jailbroken.... If this is the case then you are on your own.
Unauthorized modification of iOS...
http://support.apple.com/kb/HT3743 -
Lately I have been trying to download some apps but when i click install, the appstore comes up with a message saying that my apple ID can't be used in the iTunes store. This has hever happened to me before and when I go to the settings and the Appstore, then click see Apple ID, it doesn't open. Please help, I don't know what to do. Is this a bug from iOS7.0.4???
JUst experienced the exact same problem after changing password.Getting same message. Hope someone has an answer for this.
-
Photoshop saved a PSD file with security permissions, and now I can't access it. Please help!
Using Photoshop CC, I saved a PSD file after several hours of editing. I also exported a TIF file from the PSD. After closing Photoshop, I cannot access either file in any way. I cannot even copy them.
going to properties --> security, I get a message that reads, "You must have Read permissions to view the properties of this object." Click Advanced to continue.
When I click Advanced, it says "Unable to display current owner", and in none of the three tabs available (Permissions, Auditing, or Effective Access) can I click "Continue" and get any further than the message, "You do not have permission to view or edit this object's permission settings".
Please help me. This is highly frustrating, and a bug that is costing me over an hour of my time troubleshooting.
Thank you.
UPDATE:
I rebooted, and the files are... gone. Photoshop CC has no record of the file under "Open Recent".
What just happened? I lost a good 2 hours of work and a unique photograph
UPDATE2
I restarted the project, saved a PSD with Maximize Compatibility selected. Verified this file has appropriate permissions.
When I then go to File --> Save (not "Save as", but "Save"), after progressing to 90% or so, an error message comes up, "Could not save 'O:\[path]\file.PSD' because the file name was not valid."
I click "OK", and then go to the original file and check its permissions. They are now changed to "You must have read permissions".I have this exact problem too. Windows 8.1 CC 2014 and all of a sudden I get the problems AIJ23 has. Say I have 8 files open, I save the first 3 or four, just with Control-S (saving in PSD format) no problem, then all of a sudden on the next save I get a message saying I don't have permission to save over the file followed by the same problems as above. I use Save As so I don't loose my work but I cannot delete/rename/change permissions of the original file. This only started happening about 2-3 days ago and only happens in Photoshop. I haven't managed to find much about this issue anywhere.
-
Problem with NEW H520 when installed new power supply & graphic card. Please help!
My H520 was working perfectly and was running FAST..especially when rebooting. ( It was AWESOME! )Then I installed a new power supply (Coolmax 400w) and a new graphic card (Sapphire Radeon HD6450) and then everything changed. Now my computer is booting very SLOWLY and all the programs are taking a long time to load too. I was getting a black screen for almost a full 2 minutes before the windows 8.0 screen would finally load up and then it hangs there for a few seconds and finally goes to the start screen in windows. But BEFORE I installed this new hardware, when I would reboot, I would see the Lenovo splash screen come up for a few short seconds and then it instantly went to the windows welcome screen. And even then I would barely have enough time to see the welcome screen before it instantly loaded into the windows start screen. Everything would load up fast on the desktop too and we'd be good to go. It all took about 30 SECONDS.
But now? It takes MINUTES to get everything going. After it FINALLY loads up (it takes almost 2 full minutes now!), everything hangs up. When you first click on the desktop, it takes a few seconds for all of the icons to pop up. Before I loaded the new hardware, everything loaded up instantly. I didn't even see the icons load because they were already there. But now I have to wait for them to load up before I can even see them. And it's like that with every program and web browser I try to use now. Everything hangs up at first and then finally loads. The programs work but they are sluggish.
So I uninstalled the new power supply and put back in the original 280w power supply and I took out the graphic card but it did no change. The machine is STILL running slow on everything it does and booting very slowly.
I have seen this problem mentioned elsewhere about Lenovo computers but there is never a solution. Please help! It took me a long time to save up for this computer and I have been babying it ever since. I will never be able to afford a new one or pay for tech repair. I need to fix this! I was so thrilled with this computer before the hardware upgrade. This is devastating to me that it is working so poorly now when all I was trying to do was upgrade it a little bit. Now it's performing horribly and it's only 6 months old.
I ran a four hour test on the hard drive and it is fine. I ran all the system clean ups, optimizations, registry cleanups, windows disk cleaner, defragger and virus scans. Nothing is showing up as not working but there is CLEARLY a problem. It was never this slow. And why is it STILL acting this slow even after I uninstalled all of the new hardware that made it start acting this way and went back to the original setup?
I'm trying to run a memory test on it now but the BIOS will NOT allow me to select another drive to boot from so I can't boot from the flash drive or CD drive to run the memory test. I have NO IDEA what to do next and I am starting to pull my hair out in frustration.
Please, is there anything that can be done to make it better again?
Any help would be HUGELY appreciated. Thank you!
Sincerely,
JenniferI totally give up!! I restored everything to the ORIGINAL state with drivers AND hardware and STILL everything is not working properly like it was BEFORE the upgrade.
So this has been the WORST experience with Tech support EVER!! I have spent DAYS on the phone for HOURS with these technicians and nobody seems to know what they are doing. They put me on hold every 10 minutes and are gone for 10 to 15 minutes and when they come back, they seem all set on a new solution but when you ask them questions about it, they have NO CLUE how to answer and then they put you on hold again. Nothing gets solved and after HOURS on the phone, I just tell them to stop because we are getting no where but running around in circles that make no sense. THIS A NIGHTMARE!!
So I totally gave up on being able to upgrade this machine. To any future buyers, I STRONGLY recommend you do all upgrading BEFORE you get it home for the first time. Make sure you have your power supply and graphic card INCLUDED before you bring it home or you're mostly likely going to have a NIGHTMARE upgrading it later. Technical support is a HORROR STORY and expect to be WAITING for LOOOOONNNNG periods of time both ON THE PHONE and ONLINE and probably ending up with NO SOLUTION in the end.
I've VERY upset with how this turned out!! I'm just gonna have to deal with the fact that my computer is permenantly messed up and NOBODY AT LENOVO knows how to fix it. So I'm stuck.
I decided to send back the new power supply and the new graphic card because of this nightmare with tech support. I put everything back to the way it was when I bought the computer and it is STILL acting up!! I just want to revert it back to factory settings .. INCLUDING THE BIOS... but Lenovo said I have to send the WHOLE computer back to them to do that. All I can do from home is restore from a point in the hard drive and that's not enough. I need a TOTAL CLEAN INSTALL. Everything needs to be wiped out and reset, not just restored to a previous restore point. I've done this multiple times and all it does is erase all the programs and stuff I put on the computer. The drivers and other codes are still the same. And then bugs come up and things get all wonky. I NEVER HAD THIS PROBLEM BEFORE I TRIED TO UPGRADE IT!!
I am NOT comfortable with Lenovo's "solution". I do NOT want to send my computer back to them for them to reset it with factory disks ESPECIALLY when they stated that they are NOT responsible for any damage in transport or otherwise. I have to buy extra packaging to make sure it gets there safely. They told me to use the original box and packaging, that is the only way they can be sure it will get there safe. Who has the original stuffing SIX MONTHS LATER?!?! I don't want to be sending my computer across the country to get jostled all over the place and have that add to the slowness of the hardware because it was jostled.
Can't I reset it from home? Can they not send ME the disks instead of me sending my whole computer to them?
I'm so incredibly frustrated with this. I hope somebody answers quickly and that I don't have to wait DAYS to get a response again.
I absolutely LOVED my Lenovo computer! And then I tried to upgrade it. BIG MISTAKE!! Now everything is totally messed up and Lenovo's customer support for technical problems is HORRID!!
Somebody please help. This is driving me crazy with frustration and totally breaking my heart. It took me a VERY long time to save up for this computer and it was my most loved possession. It was a reward for a lot of hard times and now it's all broken and acting slow. And it's only 6 months old.
Is there a solution to this very frustrating problem?
I just want it to go back to the way it was before.
And is there a very low cost KNOWN TO WORK WITH THIS MACHINE upgraded graphic card and power supply? Is there a very specific brand and make? If so, could you let me know what it is in case I try to upgrade it again someday?
Thank you for your time and for reading this!
Please have a FANTASTIC day today!!
~Jennifer~ -
Dear All
I reset all setting including all data , so it shows that it will take 2hr, but now its almost i day only Apple logo is visible in screen , please help me what shloud i do, Actuly i want to remove all data , there is no virus no problem , just want to data, but untill now its not fix yetOhhh!
All you have to do is to put your iPhone into DFU Mode
Just simply connect your iPhone to iTunes, hold the power button + home button for 10 seconds, later by holding the home screen button continuously (Without leaving it) until it appears to be in recovery mode in iTunes.
You now hit the restore button in iTunes. It will download the latest version of iTunes, which might take a while.
After that, it will install the iOS (51.1) which might take 7-10 min. And you're good to go!
If you're not able to put the iPhone in DFU here are the video instructions : http://www.youtube.com/watch?v=ofpinyGlQ8I
This should solve your problem! -
I forget my answer qustion and i can answer what can i do please help me
I forget my answer secure qustion .. How can i get it please help me
Security questions
http://support.apple.com/kb/HT5312
Security Questions
Maybe you are looking for
-
How to use selection creteria in Trial Balance ???....
Dear all, Redefining my question in another thread, How to use selection creteria in Trial balance to get closing balance of previous fiscal year as opening balance of current fiscal year(01.04.09 to till date) ? Since Revenue,Expenditure account get
-
What to do if the activated pc is reformatted without deactivation?
I had installed CS4 on a pc, and then there were some registry problems (lost the touch screen drivers) which required me to reformat the system drive and reinstall. Now when I try to activate, Adobe correctly notes that I didn't deactivate their rec
-
Trouble shooting help needed for Elements 9
When I go to "FIX' in Elements 9, I get a Runtime Error message followed by this screen: Adobe Photoshop Elements 9 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solu
-
Symptom: When making a transition on one particular slide the "static" slide appears for a moment before making a successful transition. Description: I have a slide on which there are several text boxes that appear and then move to different location
-
Hi, In BPS, when user A is modifying a dataset, user B at the same time can't modify the same dataset because of the data locks. I wonder how does it work in BPC. In script logic when you add a particular value, say company 1000, in the dataset using