My i pod classic 120gb will only run approx 4hrs on a full charge

when i take my i pod classic off full charge it now runs for only 4 hours then it goes flat
i rember when i first got it i could have 2 days before it needed charged up again

Follow the instructions here that apply to your model. If that doesn't solve the problem, take it to an authorized service center.

Similar Messages

TS1372 I-Pod classic 120GB just will not sync with tmy i-tunes.....I-tunes reports error 1415, 1417, 1418, 1428, 1429, 1430, 1436 or 1439......No idea what that all means. Ipod is very tempermental about saving my tunes, anyone no what to do?

I-pod classic 120GB will not sync with my i tunes errors reported 1415, 1517, 1418, 1428, 1429, 1430, 1436 or 1439, completely unsure what any this means? Is my I-pod for the bin seems strange as its only about 2 years old? It finds it very difficult to sync with any of my tunes at all, can anyone help with what to do please. Thanks

Read this thread. Post back your hard drive stats...
tt2

I am trying to run my registered CS6 Design Standard programs for the first time after install. InDesign runs OK, but Illustrator and Photoshop will only run in trail mode. How do I activate those two?

I can't get my registered versions of CS6 Photoshop and Illustrator to run in full mode. I installed CS6 Design Standard online end of June (an upgrade from CS5.5), on my old MacBook Pro. I didn't run the programs then as I was waiting on arrival of new MacBook Pro. I migrated the programs from my old MacBook to the new, and today tried to run those programs for the first time. InDesign work OK (after an initial hiccup) but Illustrator and Photoshop will only run in trial mode, and won't let me save files. My CS6 Design Standard shows with it's registration in my Adobe Account. All seems in order, but Illustrator and Photoshop won't run in registered mode. Can you please help?

Demons1 in the future please only migrate your documents and settings.
Please use the uninstallers to remove your current installation. They are located in the Applications/Utilities/Adobe Installers folder. Once the uninstall is complete you will also want to run the CC Cleaner Tool. You can find more details at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.
If you need to download a fresh copy of the installation files for Creative Suite 6 you can do so at Download CS6 products.

Every time I update firefox it will only run updater.exe when I try to restart

every time I update firefox it will only run updater.exe when I select firefox to run. The only way around this that I have found so far is to do a fresh install of firefox.

Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
Profile Backup and Restore
*http://kb.mozillazine.org/Profile_backup
*https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

I can not turn off my i pod classic 120GB

I can not turn off my i pod classic 120GB. Any suggestions?

Ross...
Try the 5R's > Apple - Support - iPod classic Troubleshooting Assistant

My computer will only run CS3....where can i get this from?

My computer will only run CS3....where can i get this from?

Simon,
You may try to buy elsewhere. You may come across offers of new and unopened box sets, and used ones. There is quite a number of rules concerning the legality of taking over Adobe software from others, in some cases requiring a licence transfer.

I have a on line office manager that will only run with windows 7 or vista, how can I run it on my iMac?

I have an online office manager that will only run with windwos 7 or Vista, how can I run it on iMac?

If they don't have a Mac version and you must have it, you'll have to install Windows in Boot Camp or similar app.

My phone will not turn on. it has a full charge.

my iphone will not turn on. it has a full charge. have tried all buttons. please help!

Try resetting it. Hold the home and on/off buttons together for 9 or 10 seconds. Hopefully you will then see the Apple logo.

The "VISA Configure Serial Port" VI will only run at 9600 Baud

I have written a Serial Port monitor "RS232 RW.vi" that works for the most part. The problem is that it will not respond to alternate port configuration settings.... For instance: the default RS232 Serial port configuration is:
(COM1,9600 baud,8 data bits,1 Stop bit, None no parity)
As a test, I am using a Null Modem Cable to connect From my LabView Com1 port to another PC running RealTerm Serial Port Monitor.. Using my newly designed "RS232 RW.vi" With port settings of (COM1,9600 baud,8 data bits,1 Stop bit, None no parity), I can send and receive data back and forth all day long no problems....
However, if I configure the "RS232 RW.vi" port to any other configuration, such as (COM1,2400 baud ,7 data bits,1 stop bit, Odd parity).. It will not take the expected chances and continues to operate @ 9600 baud etc.
I then changed the "RS232 RW.vi" default settings to (2400,7,1,Odd)
it still refuses to deviate from (COM1, 9600,8,1,None...)
I also went into the Win XP Device Manager on the LabView system and manually configured Com1 to 2400,7,1,Odd
and still,.... the "RS232 RW.vi" will only operate @ 9600,8,1,None
Can anyone else test drive my VI and see if they have the same problem of not being able to see new changes in the Port configuration settings ..other than (COM1, 9600,8,1,None...).... ?
FYI.. Unfortunately my LabView is running on Version 6.0 so you may need to up-convert the attached vi
Solved!
Go to Solution.
Attachments:
RS232 RW.vi ‏102 KB

Instead of just appreciating the comments, you need to implement them.
Having the VISA close inside the loop is definitely the problem. And Crossrulz is 100% correct about the problem being that the serial port gets reset to the default baud rate after closing the port. Here is the proof.
Note that while you may have set the port settings manually in device manager, those settings are revised by the VISA driver. If you look in Measurement and Automation Explorer under Devices and Interfaces >> Serial and Parallel, you'll see the default settings that the VISA driver uses. If you change the setting there, your program will work the way you want. But that is not the correct fix. The correct fix is to get the VISA close out of the while loop.
The port settings are established in this order.
1. By the Windows device drivers.
2. By the VISA driver as established in MAX. Since you are useing VISA, these settings will automatically override #1.
3. By the port settings you set programmatically in your LabVIEW program.
Attachments:
Example_VI.png ‏18 KB

Firefox 21 will only run in Admin. mode on Win 7 Pro. Also when I installed FF21 it came with a nasty virus.

Those are the details. FF 21 will not run on my system unless I choose Run as Administrator. So far none of the guesses posted by your tech support about this question in the past have worked.
I have removed the virus and removed FF and reinstalled. Same problem. I removed it again totally and reinstalled, same problem. I have installed it again under an Admin account and I still have the same problem. All of the earlier versions of FF worked fine in user mode.

I know that there are many posts on the internet dealing with FF having to be run under Admin. mode, but none of the guesses as to why have solved this problem. I also realize that most people running 21, judging from the lack of reaction, are running fine in user mode. But it would seem that the FF development team would be interested in this situation.
The trojan that came in on the FF install shut down Trusteer Rapport, a security software that my bank uses and recommends. The Trusteer support team worked with me to disable and remove the Trojan. That is what is called service.

My acrobat pro will only run while the disc is in

Why does Acrobat Pro only run when the disc is in?

Hi johnheaney
Please provide more details around the issue to help you further.
-- What is the workflow?
-- Are you trying to install acrobat or launch it?
-- what is the version of acrobat that you're using?
-- What is the OS ?
~Mandy

I replaced battery and now will only turn on when plugged into a charger..

I replaced my batter on my iphone 3gs and then it will only turn on when i connect it to a power source.
After it has turned on you can take it off charge and it will stay on...
Help please!! thanks

Either you got a bad battery, didn't install it correctly, did some other damage while installing, or haven't let it charge enough yet. There's really nothing we can do to help you with any of those scenarios.
Regards.

SSIS Package will only run as SQL Agent Job when I have remote desktop to server open.

Hey guys, so I have another problem to add to the already massive 'SSIS/SQL Server Agent Job' pile. After days of searching, I can't seem to find anything specific to my problem though.
The setup is as follows: a SSIS package that refreshes and saves excel files that are hosted on a server. The package runs fine on the local machine, using BIDS on the server, and will even work as a SQL Agent Job on the server IF there is a remote
desktop connection to the server. To elaborate, if I simply run the job as you would normally do it will fail and give the below error. If I run the job while either myself, or a different machine, has a remote desktop connection to the server where the
job is scheduled - it will run successfully.
Below is the error from the History File of the job. Any help would be greatly appreciated.
Source: Refresh Excel and Save      Description: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Runtime.InteropServices.COMException (0x8000401A): Retrieving
the COM class factory for component with CLSID {00024500-0000-0000-C000-000000000046} failed due to the following error: 8000401a.     at ST_79772452677f4de1852d5ffbba3e5232.csproj.ScriptMain.ExcelRefresh(String FileName)
at ST_79772452677f4de1852d5ffbba3e5232.csproj.ScriptMain.Main()     --- End of inner exception stack trace ---     at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct&
sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)     at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)     at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags
invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)     at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo
culture, String[] namedParams)     at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, CultureInfo culture)     at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript()
UPDATE:
In my previous post the Identity in DCOM Config file for Microsoft Excel was set as The Interactive User. The job was working only when I had a remote connection to the server open.
If I set the Identity to 'This User' and use the username and password of the server login account, it will work as a scheduled job without needing an open remote connection to the server. So it works, great! but I have reservations setting this
for all instances of Excel for the server. I'm sure other users have different accounts they use for running Excel. Any suggestions around this?

Hi LiamSexton,
It should be the server-side Automation of Office issue described in the following KB article:
http://support.microsoft.com/kb/257757
Microsoft does not currently recommend, and does not support, Automation of Microsoft Office applications from any unattended, non-interactive client application or component (including ASP, ASP.NET, DCOM, and NT Services), because Office may exhibit
unstable behavior and/or deadlock when Office is run in this environment.
User Identity: Office applications assume a user identity when the applications are run, even when Automation starts the applications. The applications try to initialize toolbars, menus, options, printers, and some add-ins based on settings in the user
registry hive for the user who launches the application. Many services run under accounts that have no user profiles (such as the SYSTEM account or the IWAM_[servername] accounts). Therefore, Office may not initialize correctly on startup. In this situation,
Office returns an error on the CreateObject function or the CoCreateInstance function. Even if the Office application can be started, other functions may not work correctly if no user profile exists.
To work around the issue, you can refer to the following alternative introduced in the article:
Most server-side Automation tasks involve document creation or editing. Office 2007 supports new Open XML file formats that let developers create, edit, read, and transform file content on the server side. These file formats use the System.IO.Package.IO
namespace in the Microsoft .NET 3.x Framework to edit Office files without using the Office client applications themselves. This is the recommended and supported method for handling changes to Office files from a service.
Regards,
Mike Yin
TechNet Community Support

Class will only run with full package path - why?

Hi,
I've recently used Ant to package up a jar file with a simple gui application. Though I believe I've done everything right in terms of packaging I find that when I copy jar file to another computer not only do I need to unjar it I also need to use the full package name in order to get it to run. I thought that I should be able to run it by either using: java -jar CheckLogs
or jar -xvf logUtils.jar, and then java CheckLogs.
Instead only this will work:
java net.kenjanuski.utils.CheckLogs
My understanding is that if I put package net.kenjanuski.utils at top of file that I shouldn't have to use the full package name. Am I missing something obvious? By the way Ant did create the proper directory structure if I unpack the jar: net/kenjanuski/utils/...
Thanks for any ideas,
Ken

I'm not going to try to answer the jar question, but as far as package name goes, if your CheckLogs class starts with the statement "package net.kenjanuski.utils;" then the fully qualified name of the class is net.kenjanuski.utils.CheckLogs. The java.exe command uses the fully qualified name of the class. So the only way it will work is "java net.kenjanuski.utils.CheckLogs" just as you found out.
You can run the Jar file if you define the class in a Manifest file. See http://java.sun.com/docs/books/tutorial/jar/basics/run.html

ITunes 7 will only run with date in application name. Why????

Hi, I upgraded to iTunes 7 and could not get it to run. After the license agreement I would get an error -50 message. Somehow, during some messing around, I noticed that the application name had changed from iTunes to iTunes 06-10-04 I don't know how this cane about but iTunes loaded up with no problems.
Then I took the 06-10-04 out of the name, and again iTunes would not run, the error -50 message appearing. Puting the numbers back into the name solved the issue once more.
Any ideas???
Thanks.
Hugh

I'm not going to try to answer the jar question, but as far as package name goes, if your CheckLogs class starts with the statement "package net.kenjanuski.utils;" then the fully qualified name of the class is net.kenjanuski.utils.CheckLogs. The java.exe command uses the fully qualified name of the class. So the only way it will work is "java net.kenjanuski.utils.CheckLogs" just as you found out.
You can run the Jar file if you define the class in a Manifest file. See http://java.sun.com/docs/books/tutorial/jar/basics/run.html

My i pod classic 120gb will only run approx 4hrs on a full charge

Similar Messages

Maybe you are looking for