My ideatab A2107A-H does not start up after I turn it to dim.

This tab gave to me by my father this christmas. But he already use it by a shorttime. And when I surfing in the internet I dim it because the class was starting on and while our teacher was go out for a while I turn on for a second my tab to check if it is done to buff yahoo mail it doesn`t on. I try many patterns to on it like when you reset or hard reset your tab  but does not effective. Please help me to solve it. It does not also low bat, drop, squeez or turning off. And when I turn it on for a many seconds its like a have a little bit of sounds on the battery when I put nearly my ear to back of my tab. And thanks already to those who help me. 

There are four general causes of this issue:
1. The computer's PRAM no longer contains a valid startup disk setting when there aren't any problems with the disk itself. This can be checked for by pressing the Option key and seeing if the drive appears.
2. The internal drive's directory structure has become damaged. This requires usage of an alternate bootable system to perform the repair.
3. Critical system files have been deleted. This requires usage of an alternate bootable system to reinstall them.
4. The internal drive has died or become unplugged. This is the most likely case if the computer took a sharp impact or there are unusual sounds coming from the hard drive's location.
(74448)

Similar Messages

  • Firefox does not start up after an automatic update. Every time i try to open it, it just prompts the Mozilla Crash Reporter.

    Firefox does not start up after an automatic update. Every time i try to open it, it just prompts the Mozilla Crash Reporter.
    ''Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:3.6.10
    BuildID: 20100914125854
    CrashTime: 1290192405
    EMCheckCompatibility: true
    FramePoisonBase: 00000000f0de0000
    FramePoisonSize: 65536
    InstallTime: 1287124738
    ProductName: Firefox
    ReleaseChannel: release
    SecondsSinceLastCrash: 422
    StartupTime: 1290192405
    Theme: classic/1.0
    Throttleable: 1
    Vendor: Mozilla
    Version: 3.6.10
    This report also contains technical information about the state of the application when it crashed.''
    Same thing happens when i click restart.
    No difference when i run it in Safe mode. And it won't let me create a new profile either. Is there anyway else i can extract my bookmarks? This is driving me crazy!

    Did the crash reporter send any crash reports?<br />
    You can see the crash reports in this folder:
    "C:\Users\&lt;user&gt;\AppData\Roaming\Mozilla\Firefox\Crash Reports"
    See: http://kb.mozillazine.org/Breakpad
    See also [[Firefox crashes when you open it]]
    Create a new profile as a test to check if your current profile is causing the problems.<br /><br />
    See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting&#58; Make a new profile]]<br /><br />
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"<br /><br />
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)<br /><br />
    See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox<br /><br />
    If that still causes the same problem then do a clean reinstall and remove the Firefox program folder.
    * Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    * Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    * Don't remove personal data when uninstalling.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    See:
    * http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution

    After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution?

    Extensions can sometimes be the cause of problems. If the problem does not occur in Safe Mode, then you can disable your extensions one-by-one until you find out which one is causing the problem. See [[Troubleshooting extensions and themes]]

  • New Macbook Pro does not start up after updating...HELP!!!

    Hi,
    My new Macbook Pro does not start up after it got updated. The first time I used it, it was perfect. I updated it and restarted it when it told me to but it doesn't boot. It shows an apple and a spinning circle when it turns on but that's it.
    Can somebody please help me?

    You should probably post your question in the MacBook Pro discussions:
    http://discussions.apple.com/category.jspa?categoryID=190

  • IPhoto does not start up after upgrading

    On my new iMac iPhoto does not start up after migrating. Upgrade from iPhoto 6/Snow Leopard > Lion 10.7.1 with iPhoto 9.1.5. When the conversion is finished I can see the new library, it works allright. And with packet-inspection (or how is that called in English) all maps & data seems to be OK; I can check the seperate pics.
    But: iPhoto won't start up a second time (grey screen with infinite spinning wait cursor). The same thing is happening when I add a new library and drop in some pictures.
    What can cause this problem?

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • Transport service does not start automatically after upgrade to exchange 2010 SP2 from Exchange 2010 SP1

    Hi,
    I am trying to upgrade Exchange 2010 SP2 from SP1, but Transport service does not start automatically.
    Tried manually start services, it started successfully but again goes down within few seconds automatically.
    Reboot server. but no luck.
    Any help.
    MD

    Hi,
    I recommend you use event viewer to check if there are any relate event logs. This may help us to find the cause.
    In addition, as Amit mentioned, Exchange 2010 SP2 isn't supported by Microsoft, I think upgrading to SP3 is a much more sensible approach.
    Thanks.
    Niko Cheng
    TechNet Community Support

  • Xfce4-power-manager does not start, but after relogin - works

    Hi all.
    When I login after system start, xfce4-power-manager does not start and systemtray icon doesn't appear. But after relogin (not restart), the systemtray icon of xfce4-power-manager appears and power manager itself works correctly (if I don't relogin, notebook will shutdown after 10 minutes of downtime - that rule doesn't exist in xfce4-power-manager settings).
    Diff between two logs (before relogin and after, xfce4-power-manager --debug command)
    diff log_1 log_2
    35c35,36
    < TRACE[xfpm-battery.c:286] xfpm_battery_refresh_icon(): Battery state 0
    > TRACE[xfpm-battery.c:150] xfpm_battery_refresh_visible(): visible=TRUE: ((XfpmShowIcon) SHOW_ICON_WHEN_BATTERY_PRESENT)
    > TRACE[xfpm-battery.c:286] xfpm_battery_refresh_icon(): Battery state 4
    51d51
    < TRACE[xfpm-polkit.c:238] xfpm_polkit_free_data(): Destroying Polkit data
    System
    Linux gready 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 20:40:47 CEST 2014 x86_64 GNU/Linux
    systemd 212-3
    xfce4-power-manager 1.2.0-6
    That bug start happening after one of last week updates. I don't have a package cache.
    Can anyone help me?
    p.s. sorry for a bad English.

    Yes, i'm actually running xfce4 (all other things from xfce4 group are installed).
    It starts from a login manager named LightDM.
    AcpiD installed as a dependency.
    logind.conf
    # This file is part of systemd.
    # systemd is free software; you can redistribute it and/or modify it
    # under the terms of the GNU Lesser General Public License as published by
    # the Free Software Foundation; either version 2.1 of the License, or
    # (at your option) any later version.
    # See logind.conf(5) for details
    [Login]
    #NAutoVTs=6
    #ReserveVT=6
    #KillUserProcesses=no
    #KillOnlyUsers=
    #KillExcludeUsers=root
    #InhibitDelayMaxSec=5
    HandlePowerKey=ignore
    HandleSuspendKey=ignore
    HandleHibernateKey=ignore
    HandleLidSwitch=ignore
    #PowerKeyIgnoreInhibited=no
    #SuspendKeyIgnoreInhibited=no
    #HibernateKeyIgnoreInhibited=no
    #LidSwitchIgnoreInhibited=yes
    #IdleAction=ignore
    #IdleActionSec=30min
    I turned off key handlers because I truly HATE when I press power button and a notebook doing shutdown after that.
    Last edited by theperfectblance (2014-04-17 06:57:32)

  • Itunes does not start anymore after upgrade to 6.05.20

    I upgraded itunes to the current version and after that itunes does not start anymore. I scanned for virus with an up-to-date scanner, scanned for adware with Windows defender and ewido and used the tips from http://docs.info.apple.com/article.html?artnum=42963
    I run itunes on Windows Server 2003 which worked fine for three years. I know it is officially supported on XP only.
    I deinstalled itunes and reinstalled afterwards no change. The windows event log shows some erors
    Faulting application iTunes.exe, version 6.0.5.20, faulting module shell32.dll, version 6.0.3790.2662, fault address 0x0015af84.
    Any other idea?
    Thanks
    Christoph

    ok, so I am not sure if this is legal or not, but there is a site called oldversion. Go there, and you can get past versions of applications such as aim , and in this case, itunes. just uninstall your other itunes first.
    Sometimes different versions of appications run better on different computers. this new itunes probably just has something the last one didnt that cant run with what you have on your computer

  • Satellite A series does not start up after BIOS update

    After bios update with downloaded utility my notebook does not start up.
    Did this case covered by warranty?

    Im not quite sure if this would be covered by warranty. You should contact the ASP in your country for details but I presume its not covered.
    PS: Did you try this workaround:
    - remove battery, disconnect the AC adaptor
    - wait ~ 40min
    - connect both devices again and try to power up the notebook

  • J2ee engine does not start up after system copy

    Dear All,
    I have done a system copy of BW3.5 (NW04). I installed the BW.3.5 and then replaced the data and control files.
    This has ABAP + java.
    Now after system copy when i am starting the server, the J2ee instance doesnt start up.
    ABAP is running and DB is up too.
    I am getting the following error in log_bootstrap file:-
    Exception occured:
    com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties!
            at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:422)
            at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
            at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:813)
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
            at java.lang.reflect.Method.invoke(Method.java:391)
            at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
    ==[ Caused by: ]==----
    com.sap.engine.bootstrap.SynchronizationException: No such Dialog Instance (ID1125100) in the database! Check
    database consistency or local Bootstrap properties!
            at com.sap.engine.bootstrap.Synchronizer.getElementType(Synchronizer.java:81)
            at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:420)
            at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
            at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:813)
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
            at java.lang.reflect.Method.invoke(Method.java:391)
            at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
    [Aug 26, 2008 2:00:26 PM ] [Bootstrap module]> Problem occured while performing synchronization.
    [Aug 26, 2008 2:00:42 PM ] -
    [Aug 26, 2008 2:00:42 PM ] Bootstrap MODE:
    [Aug 26, 2008 2:00:42 PM ] <INSTANCE GLOBALS>
    [Aug 26, 2008 2:00:42 PM ]  determined by parameter [ID0011251].
    [Aug 26, 2008 2:00:42 PM ] -
    [Aug 26, 2008 2:00:46 PM ] Exception occured:
    com.sap.engine.frame.core.configuration.NameNotFoundException: A configuration with the path "cluster_data/di
    spatcher/ID1125100" does not exist.
            at com.sap.engine.core.configuration.impl.ConfigurationDataCacheAllImpl.getSubConfiguration(Configura
    tionDataCacheAllImpl.java:107)
            at com.sap.engine.core.configuration.impl.ReadAccessConfiguration.getSubConfiguration(ReadAccessConfi
    guration.java:715)
            at com.sap.engine.bootstrap.Synchronizer.getConfiguration(Synchronizer.java:365)
            at com.sap.engine.bootstrap.Synchronizer.getElementType(Synchronizer.java:78)
            at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:420)
            at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
            at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:813)
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
            at java.lang.reflect.Method.invoke(Method.java:391)
            at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
    What could the problem?. Do I need to do some other settings for system copy of JVA instance?
    Kindly help
    Thanks
    Tajinder

    Hi,
    I already checked that note. It did not help.
    I am pasting mine dev_jcontrol file:--
    trc file: "/usr/sap/BD1/DVEBMGS00/work/dev_jcontrol", trc level: 1, release: "640"
    node name   : jcontrol
    pid         : 868524
    system name : BD1
    system nr.  : 00
    started at  : Tue Aug 26 16:27:10 2008
    arguments   :
        arg[00] : jcontrol
        arg[01] : pf=/usr/sap/BD1/SYS/profile/BD1_DVEBMGS00_BWQAS
        arg[02] : -DSAPSTART=1
        arg[03] : -DCONNECT_PORT=64380
        arg[04] : -DLISTEN_PORT=64381
        arg[05] : -DSAPSYSTEM=00
        arg[06] : -DSAPSYSTEMNAME=BD1
        arg[07] : -DSAPMYNAME=BWQAS_BD1_00
        arg[08] : -DSAPPROFILE=/usr/sap/BD1/SYS/profile/BD1_DVEBMGS00_BWQAS
        arg[09] : -DFRFC_FALLBACK=ON
        arg[10] : -DFRFC_FALLBACK_HOST=localhost
    JStartupReadInstanceProperties: read instance properties [/usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.proper
    ties:/usr/sap/BD1/DVEBMGS00/SDM/program/config/sdm_jstartup.properties]
    -> ms host    : BWQAS
    -> ms port    : 3601
    -> OS libs    : /usr/sap/BD1/DVEBMGS00/j2ee/os_libs
    -> Admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Used property files
    -> files [00] : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
    -> files [01] : /usr/sap/BD1/DVEBMGS00/SDM/program/config/sdm_jstartup.properties
    Instance properties
    -> ms host    : BWQAS
    -> ms port    : 3601
    -> os libs    : /usr/sap/BD1/DVEBMGS00/j2ee/os_libs
    -> admin URL  :
    -> run mode   : NORMAL
    -> run action : NONE
    -> enabled    : yes
    Bootstrap nodes
    -> [00] bootstrap            : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
    -> [01] bootstrap_ID1125100  : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
    -> [02] bootstrap_ID1125150  : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
    Worker nodes
    -> [00] ID1125100            : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
    -> [01] ID1125150            : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
    -> [02] sdm                  : /usr/sap/BD1/DVEBMGS00/SDM/program/config/sdm_jstartup.properties
    [Thr 01] Tue Aug 26 16:27:10 2008
    [Thr 01] SigISetDefaultAction : default handling for signal 20
    [Thr 01] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
    [Thr 258] JControlDPMessageFunc: Thread 258 started as handler thread for R/3 dispatcher messages.
    [Thr 01] *** WARNING => Maximum Java heap size specified twice (through maxHeapSize and in javaParameters) -
    using -Xmx512m [jstartxx_mt. 2282]
    [Thr 01] [Node: bootstrap] java home is set by profile parameter
            Java Home: /usr/java14_64
    JStartupIReadSection: read node properties [bootstrap]
    -> node name       : bootstrap
    -> node type       : bootstrap
    -> java path       : /usr/java14_64
    -> java parameters : -Djco.jarm=1 -Djco.jarm=1
    -> java vm version : J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142-20060421 (SR5) (JIT enabl
    ed: jitc)
    -> java vm vendor  : Classic VM (IBM Corporation)
    -> java vm type    : <default>
    -> java vm cpu     : ppc64
    -> heap size       : 512M
    -> root path       : /usr/sap/BD1/DVEBMGS00/j2ee/cluster
    -> class path      : ./bootstrap/launcher.jar
    -> OS libs path    : /usr/sap/BD1/DVEBMGS00/j2ee/os_libs
    -> main class      : com.sap.engine.offline.OfflineToolStart
    -> framework class : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class  : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path  : /usr/sap/BD1/DVEBMGS00/j2ee/os_libs/jstartup.jar
    -> parameters      : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0011251
    -> debuggable      : yes
    -> debug mode      : no
    -> debug port      : 60000
    -> shutdown timeout: 120000
    JStartupStartJLaunch: program = /usr/sap/BD1/DVEBMGS00/j2ee/os_libs/jlaunch
    -> arg[00] = /usr/sap/BD1/DVEBMGS00/j2ee/os_libs/jlaunch
    -> arg[01] = pf=/usr/sap/BD1/SYS/profile/BD1_DVEBMGS00_BWQAS
    -> arg[02] = -DSAPINFO=BD1_00_bootstrap
    -> arg[03] = -file=/usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
    -> arg[04] = -nodeName=bootstrap
    -> arg[05] = -nodeId=-1
    -> arg[06] = -syncSem=12582961
    -> arg[07] = -jvmOutFile=/usr/sap/BD1/DVEBMGS00/work/jvm_bootstrap.out
    -> arg[08] = -stdOutFile=/usr/sap/BD1/DVEBMGS00/work/std_bootstrap.out
    -> arg[09] = -locOutFile=/usr/sap/BD1/DVEBMGS00/work/dev_bootstrap
    -> arg[08] = -stdOutFile=/usr/sap/BD1/DVEBMGS00/work/std_bootstrap.out
    -> arg[09] = -locOutFile=/usr/sap/BD1/DVEBMGS00/work/dev_bootstrap
    -> arg[10] = -mode=BOOTSTRAP
    -> arg[11] = pf=/usr/sap/BD1/SYS/profile/BD1_DVEBMGS00_BWQAS
    -> arg[12] = -DSAPSTART=1
    -> arg[13] = -DCONNECT_PORT=64382
    -> arg[14] = -DLISTEN_PORT=64381
    -> arg[15] = -DSAPSYSTEM=00
    -> arg[16] = -DSAPSYSTEMNAME=BD1
    -> arg[17] = -DSAPMYNAME=BWQAS_BD1_00
    -> arg[18] = -DSAPPROFILE=/usr/sap/BD1/SYS/profile/BD1_DVEBMGS00_BWQAS
    -> arg[19] = -DFRFC_FALLBACK=ON
    -> arg[20] = -DFRFC_FALLBACK_HOST=localhost
    -> lib path = LIBPATH=/usr/java14_64/jre/bin:/usr/java14_64/jre/bin/classic:/usr/java14_64/jre/bin:/usr/sap/B
    D1/DVEBMGS00/j2ee/os_libs:/usr/sap/BD1/SYS/exe/run:/usr/sap/BD1/SYS/exe/runU:/usr/lib:/usr/sap/BD1/DVEBMGS00/
    j2ee/os_libs:/usr/sap/BD1/DVEBMGS00/j2ee/os_libs:/usr/lib:/lib:/usr/sap/BD1/SYS/exe/run:/usr/sap/BD1/SYS/exe/
    runU
    -> exe path = PATH=/usr/java14_64/bin:/usr/sap/BD1/DVEBMGS00/j2ee/os_libs:/oracle/BD1/920_64/bin:/usr/java14_
    64/bin:/home/bd1adm:/usr/sap/BD1/SYS/exe/runU:/usr/sap/BD1/SYS/exe/run:/usr/bin:/etc:/usr/sbin:/usr/ucb:/home
    /bd1adm/bin:/usr/bin/X11:/sbin:.
    [Thr 01] JStartupICreateProcess: fork process (pid 893002)
    [Thr 01] Tue Aug 26 16:27:18 2008
    [Thr 01] *** ERROR => invalid return code of process [bootstrap] (exitcode=66) [jstartxx_mt. 1433]
    [Thr 01] JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc=66)
    [Thr 01] JControlCloseProgram: started (exitcode = 66)
    [Thr 01] JControlCloseProgram: good bye... (exitcode=66)
    DO i have to change the some settingdsin any file for java instance after system copy.
    Thanks
    Tajinder

  • IMac does not start-up after recovery screen.

    My iMac (late 2008), does not continue to start-up.
    After switch-0n, I get a grey screen with Apple loge, a 'busy' indicator and a 'progress bar', which fills slowly.
    When the 'progress bar' is completed, the iMac switch-off.
    When started again, the same repeats it self.
    Any keyboard combination does not work.
    What can I do..?
    Kind regards
    Stephan Schalkx
    Almere - Netherlands

    Hello Stephan
    Start with booting up to the Recovery HD and then use Disk Utility to verify the hard drive. Check out the first article to go through those steps to sort you out. If for some reason that it checks out and you are still having issues booting up, then you will want to reinstall the operating system. I have provided the steps to reinstall OS X Mavericks, but the steps are the same for OS X Lion and Mountain Lion.
    Also if you can somehow back up before you go through the troubleshooting to make sure that you have a safe copy of your date.
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck
    http://support.apple.com/kb/ts1417
    OS X Mavericks: Reinstall OS X
    http://support.apple.com/kb/ph13871
    Regards,
    -Norm G.

  • VirtualBox does not start correctly after kernel update

    Just recently I have been unable to start VirtualBox after a kernel update. That is to say it seems to be running, but displays nothing.
    The following processes are listed: VirtualBox, VBoxSVC, VBoxSVC, VBoxXPCOMPCD
    The following modules are loaded: vboxdrv, vboxnetflt, vboxnetadp
    Yesterday, when the same thing happened, I reinstalled VirtualBox and it worked correctly again.
    I recently upgraded to systemd which has caused me some other problems, so that might have something to do with it
    Cheers
    Andrew
    * Arch x86_64 up to date, NVidia proprietary drivers, AMD processor

    Updated - Rebooted (systemd does hang on reboot or shutdown but turned PC off and restarted)
    Confirmed that vbox modules are loaded:
    vboxnetflt             16807  0
    vboxnetadp             18419  0
    vboxdrv              1823469  2 vboxnetadp,vboxnetflt
    Started VirtualBox - nothing displayed.
    ps -el shows
    0 S   501  1036   614  0  80   0 - 111245 futex_ ?       00:00:00 VirtualBox
    0 S   501  1050     1  0  80   0 - 29408 poll_s ?        00:00:00 VBoxXPCOMIPCD
    0 S   501  1056     1  0  80   0 - 53178 futex_ ?        00:00:00 VBoxSVC
    output as above
    $ uname -a
    Linux ezcool 3.6.4-1-ARCH #1 SMP PREEMPT Mon Oct 29 09:49:00 CET 2012 x86_64 GNU/Linux
    # pacman -Qi linux
    Name : linux
    Version : 3.6.4-1
    URL : http://www.kernel.org/
    Licenses : GPL2
    Groups : base
    Provides : kernel26=3.6.4
    Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
    Optional Deps : crda: to set the correct wireless channels of your country
    Required By : nvidia virtualbox-host-modules
    Conflicts With : kernel26
    Replaces : kernel26
    Installed Size : 61124.00 KiB
    Packager : Tobias Powalowski <[email protected]>
    Architecture : x86_64
    Build Date : Mon 29 Oct 2012 09:55:27 CET
    Install Date : Wed 31 Oct 2012 12:28:40 CET
    Install Reason : Explicitly installed
    Install Script : Yes
    Description : The linux kernel and modules
    # pacman -Qi virtualbox-host-modules
    Name : virtualbox-host-modules
    Version : 4.2.4-2
    URL : http://virtualbox.org
    Licenses : GPL
    Groups : None
    Provides : None
    Depends On : linux>=3.6 linux<3.7
    Optional Deps : None
    Required By : virtualbox
    Conflicts With : virtualbox-modules
    Replaces : virtualbox-modules
    Installed Size : 168.00 KiB
    Packager : Evangelos Foutras <[email protected]>
    Architecture : x86_64
    Build Date : Mon 29 Oct 2012 17:23:20 CET
    Install Date : Wed 31 Oct 2012 12:29:06 CET
    Install Reason : Installed as a dependency for another package
    Install Script : Yes
    Description : Host kernel modules for VirtualBox
    Kill all VBox processes, VBoxSVC does not quit but is marked (defunct)
    Reload modules
    Confirm modules loaded
    vboxnetflt             16807  0
    vboxnetadp             18419  0
    vboxdrv              1823469  2 vboxnetadp,vboxnetflt
    Start VirtualBox - nothing
    pacman -Rdd virtualbox-host-modules
    pacman -S virtualbox-host-modules
    modprobe vboxdrv
    Start VirtualBox - nothing
    pacman -R virtualbox virtualbox-host-modules
    pacman -S virtualbox virtualbox-host-modules
    useradd -G vboxusers
    Start VirtualBox - nothing
    The problem seems to be something to do with nspr-2. I am getting multiple errors in the journal:
    Oct 31 14:16:46 ezcool kernel: INFO: task nspr-2:1007 blocked for more than 120 seconds.
    Oct 31 14:16:46 ezcool kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
    Oct 31 14:16:46 ezcool kernel: nspr-2 D 0000000000000246 0 1007 1 0x00000000
    Oct 31 14:16:46 ezcool kernel: ffff8803d67b9d68 0000000000000082 ffff8803d65b0810 ffff8803d67b9fd8
    Oct 31 14:16:46 ezcool kernel: ffff8803d67b9fd8 ffff8803d67b9fd8 ffff8804194a58b0 ffff8803d65b0810
    Oct 31 14:16:46 ezcool kernel: ffff880300000041 ffffffff8119df46 ffff88042fffdb08 0000000000000001
    Oct 31 14:16:46 ezcool kernel: Call Trace:
    Oct 31 14:16:46 ezcool kernel: [<ffffffff8119df46>] ? mntput+0x26/0x40
    Oct 31 14:16:46 ezcool kernel: [<ffffffff811251cc>] ? __alloc_pages_nodemask+0x16c/0x960
    Oct 31 14:16:46 ezcool kernel: [<ffffffff81491a09>] schedule+0x29/0x70
    Oct 31 14:16:46 ezcool kernel: [<ffffffff81491cd7>] schedule_preempt_disabled+0x27/0x40
    Oct 31 14:16:46 ezcool kernel: [<ffffffff81490368>] __mutex_lock_slowpath+0x148/0x340
    Oct 31 14:16:46 ezcool kernel: [<ffffffff81490576>] mutex_lock+0x16/0x30
    Oct 31 14:16:46 ezcool kernel: [<ffffffffa001cbfb>] show_product+0x2b/0x60 [usbcore]
    Oct 31 14:16:46 ezcool kernel: [<ffffffff8132cc90>] dev_attr_show+0x20/0x60
    Oct 31 14:16:46 ezcool kernel: [<ffffffff8112146e>] ? __get_free_pages+0xe/0x50
    Oct 31 14:16:46 ezcool kernel: [<ffffffff811ef969>] sysfs_read_file+0xa9/0x190
    Oct 31 14:16:46 ezcool kernel: [<ffffffff8117f785>] vfs_read+0xa5/0x180
    Oct 31 14:16:46 ezcool kernel: [<ffffffff8117f8aa>] sys_read+0x4a/0xa0
    Oct 31 14:16:46 ezcool kernel: [<ffffffff81499ded>] system_call_fastpath+0x1a/0x1f
    Any ideas?

  • Screensaver does not start automatically after installing ML

    I can activate using hot corners but I've tried multiple delay times and it will not start.  Must be missing something simple.  Not having any issues accessing the same photos/images as on Lion, BTW

    Hi Parvez and Ivaylo,
    Has any of you used the startup mode setting? I tried using it and set it to always but the application still won't start. Is there anything I'm missing?
    My application-j2ee-engine.xml looks like this:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE application-j2ee-engine SYSTEM "application-j2ee-engine.dtd">
    <application-j2ee-engine>
         <provider-name>nexeninc.com</provider-name>
         <fail-over-enable
              mode="disable"/>
         <start-up
              mode="always"/>
    </application-j2ee-engine>

  • Imac G5/Intel, OS 10.6., system does not start up after connecting new router

    After connecting the imac to a new router the system hung completely up. After each input, e.g. opening preview or a browser, the coloured turning disc appeared and nothing happened anymore. Several restarts, also in safe mode,  were unsuccessful. I could not switch to another user.  Restart is only possible at all from installation disc but thereafter problem remains the same.
    What can I do?

    And, what happens if you disconnect the computer from the new router? Are you able to do this, and what happens when you try it?
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • Satellite A300-15A does not start up after Alcohol program installation

    Hi...
    I bought Satellite A300-15A yesterday and after completing the Vista installation process, I tried to install "Alcohol" but my notebook shutdown and now I'm not able to start notebook.
    It is not starting in any mode.
    I forget to make recovery discs. I think Alcohol is not compatible with Vista. Error which i receive is below.
    Can anyone tell me the solution?
    Please help urgently
    "A problem has been detected and Windows has been shut down to prevent damage to your computer.
    If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: blah blah... "

    Sounds like a familiar problem to me, as I had the same one with the Daemon tools. After installing those tools I couldn't start my Windows XP any more. I guess it somehow mixed up some drivers or registry entries, but not sure about that.
    Ok, you can try to deinstall the tool by first starting Vista in safe mode (press F8 before Windows boot up).
    You should be then able to enter Vista without problem.

Maybe you are looking for

  • Using an external hard drive with my mac

    My PC crashed last night (THANK GOD NOW I CAN GET A NEW DESKTOP MAC!!!) but I need to get some pictures off of my external hard drive. Can I just plug it up with my macbook and get them off? It is compatible with MAC. It's a Lacie. Thanks for any hel

  • DBMS_LOGSTDBY.BUILD Seems to Hang

    Hi Group, One step on the logical standby creation is to execute the package DBMS_LOGSTDBY.BUILD, however it has been executing for almost three days and it does not return the sql promt, I read about metalink note 747495.1 DBMS_LOGSTDBY.BUILD Seems

  • SMS Writing problem in C5-00

    The navigation key left/right works strike when i'm editing a persian text messege! My phone is already updated. There are no viruses, no any other programs installed on my phone... What's wrong? What should i do? Thanks...

  • HP 4280 prints blank pages on mac using os X 10.8.5

    have updated drivers and deleted all prior printers. 

  • Make the Folder tab scroll control wider!

    Inexplicably, the Bridge CS3 vertical scroll bar control for the folders tabs is maybe half the width of the bar provided for content scrolling. This narrow width with no safe area next to it makes it very easy for me to overshoot the scrollbar and a