My ipad is disabled and requesting me to connect to itunes but itunes is telling me to put in password to be able to access itune. What should i do?
my ipad is disabled. What should i do?
Force iPad into Recovery Mode
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad
Similar Messages
-
My iPad is disabled and it's saying connect to iTunes but iTunes' is saying that you need to enter you iPad password...
Those Links are working here...
Try this one,
iPad Unable to Update or Restore
http://support.apple.com/kb/ht4097 -
My ipad is disabled and i have to connect to itunes what do i do
my ipad is disabled and i have to connect to itunes what do i do
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
My iPad is disabled and it says to connect to ITunes with my Mac. It still is not working.
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
I removed Netflix from my iPad last year. I want to reuse it now but am unable to download it off iCloud. It isn't getting highlighted. What should I do?
Use the serial number found in Settings > General > About
Key it in here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
Edit:
I've done it for you: It's iPhone 3G and not iPhone 3GS.
Message was edited by: ckuan -
My ipad says ipad is disable and it needs to connect to iTune?
I have this Ipad taht my cousin gave me to fix, when i turned it on is say ipad is disable and on the bottum says connect to iTune. How do I reset it with out logging in.
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note: Data will be lost
Message was edited by: Diavonex -
my ipad was disable because i forgot the passcode. it wanted me to connect to itunes so i plug it into my computer when it pop out it said it is connected to the camera so what do i do
Placing your device into recovery (DFU) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
until the red slider appears, then slide the slider. Wait for the device to turn off.
* If you cannot turn off the device using the slider, press and hold the
Sleep/Wake and Home buttons at the same time. When the device turns off,
release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
device. The device should turn on. Note: If you see the screen pictured below,
let the device charge for at least ten minutes to ensure that the battery has some
charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
can somebody please help with this issue?
The Three Best Alternatives for Security Questions and Rescue Mail
1. Use Apple's Express Lane.
Go to https://expresslane.apple.com ; click 'See all products and services' at the
bottom of the page. In the next page click 'More Products and Services, then
'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
ID security questions' and click 'Continue'. Please be patient waiting for the return
phone call. It will come in time depending on how heavily the servers are being hit.
2. Call Apple Support in your country: Customer Service: Contact Apple support.
3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID. -
My Ipad is disabled and tells me to connect to Itunes. When I do that, I get the message to enter passcode on my IPad but I can't because it's disabled:(
In one of the options, it tells me to sync as if I have never synced to itunes but I'm afraid it will reset to factory settings and I will lose what I had on Ipad.Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software. -
HT1212 my ipad is disabled and i cant fix it.
my ipad is disabled, and it says to connect to itunes.. i tryed doing that but it says that it will restore my ipad and i do not want that to happen, so i cant figure out another way to fix it, please help me.
Are you getting the message that says iTunes found an iPod in recovery mode?
Try DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Or try using this program to place the iPod in recovery mode
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
For MAC or PC
The Firmware Umbrella - TinyUmbrella -
My ipad 2 disabled and i have a itunes passcode on it what do i do
my ipad is disabled and i when i connect to itunes it wont connect i did lock my ipad from icould but i dont know what else to do can some help me please
Connect in recovery mode and restore, you'll get the option to reset the passcode during this process:
iOS: Unable to update or restore and iPhone and iPod touch: Wrong passcode results in red disabled screen
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software. -
my ipad's disabled and while restoring, it keeps on requesting for an update but whenever i try to download the udpates an error occurs, plz help
You might want to try disabling your firewall and antivirus software while you attempt to update/restore.
-
My ipad is disabled and it says i need to connect to itunes when i connect it to itunes, it says it wont recognize it until i put my passcode into my ipad, but with my ipad disabled, this is immposible, how can i resolve this problem?
You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad an resync your content to it
-
Hey, my ipad is disabled and i cant open. i tried connecting it with itunes in recovery mode to restore it but it wont work it doesnt show and options itunes doesnt detect my ipad in recovery mode. what do i do know? please help!!!
If you followed these instructions and you were unable to enter recovery mode, I'm still leaning toward a hardware problem. Also, since you have IOS-7, read this. It might help.
-
Please help!! ipad is disabled and will not do a hard reset to go into recovery mode.
i cannot do a force reset... When i hold in the home and sleep/wake button nothing happens, I have tried these same steps over and over again. Neither the apple or the itunes logo ever pop up.. The screen just stays black. I recently replaced the digitizer after my son cracked the screen. I have made sure that nothing was injured during repair. I did put the digitizer ribbon in wrong and then the screen was not working correctly. I had put the ribbon in backwards. So after the first wrong installation of the digitizer, i tried to unlock the screen with my passcode but it obviously wasn't working.. i would touch the number for the passcode but the screen would respond somewhere else..so i kept getting the passcode wrong and then BAM! Ipad disabled.. so i took a break from the frustration... When i returned to my ipad i took it back apart and thats when i realized that i had the digitizer ribbon in backwards, so i fixed it and replaced the screen once again.. But now the ipad is disabled, and for some reason it will not respond when i try to shut it down all the way, no red slider at all...so i bout a apple data transfer cable and i tried to connect it to itunes and hold the buttons like i read to do in the article, and my computer recognizes that my ipad is there,,, it tells me that i have to allow access and to respond on my ipad.. but sadly i cannot.. nothing appears on the ipad.. it stays a black screen and then when i lt go the "ipad is disabled" screen comes on.....
Then i read online that i could restore from icloud.com, so i go there, i sign in just fine but my ipad is not listed in the devices there either... it says " No Devices, You must be signed into iOS8 settings or Mac OS Yosemite system preferences to see devices."
And i dont believe the ipad is up to date, it had been unused for about 2 months, until last week when i attempted to fix it so im sure the operating system is old :-(
So im totally lost, I dont have a clue what to do to get my device recognized. I would really appreciate any help that anyone can give,, Thank you so much in advance!!!
Ipad 2 wifi 16gbIf recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Maybe you are looking for
-
File Adapter and Third party system
Hi, I am new to XI and implementing a simple scenario. In SLD- I have 3rd paty software component and product. 3rd party technical system: using my pc - For host name I am using my machine name. Scenario: Using file adapter transform csv file to xml.
-
Hi input boxes on sites appear too long. See picture attached [http://example.com https://skitch.com/68-design/ex1gx/input-boxes] Thanks in advance Andy
-
Problem with Accordion Widget INSIDE Sliding Panel Widget
Hello, perhaps I should not do this, but I nested an Accordion Widget inside a Sliding Panels Widget: - There are eight Panels. - Each one contains a complete Accordion. The sliding works fine, and so does the Accordion animation, but the text inside
-
When I record a new pass in the arrange track with previously recorded audio, it always plays the original take and not the new one, how do I stop Logic from doing this and prioritize the audio playback of the new take?
-
i need to copy the structure of one table in one schema to another schema along with some data. how can i specify the tablespace that i want to use for my table creation. i am using copy command. here is the code. is it possible to specify the tables