My iPhone has a black screen I started to charge it yesterday and it wouldn't charge and I tried to charge it over night. But it is still black I've tried to reboot and still nothing HELP!
I tried to charge my iPhone yesterday and notice that it wasn't charging. And I plugged it in when I got home and when I woke up it still had a black screen. I have tried to reboot. And it still does want to come up.
Yea, unfortunately the cost is quite a bit. Maybe cheaper to check your upgrade eligibility through your carrier or try craigslist?
Just be careful on the craigslist, people will try to sell you ones that are locked to someones apple id already.
Similar Messages
-
My computer has a white screen at start up and sits for hours. How can I fix my computer?
My computer has a white screen at start up and sits for hours. How can I fix my computer?
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
Imac have black screen. Start Computer sound come on, no picture. The last time I used the computer I put it to sleep, it never came back. i tried everything that was suggested including puting in the start up disk. The disk would not eject. Some one suggested how to remove it and that did work. Computer going to Apple hospital Tues. July 3, thank you for all the suggestions.
Phyllis33There is nothing wrong with the OS update.
Delete ALL your email accounts.
Restart Playbook
Put the accounts back and ensure they are all set with PUSH ON. Manual (push off) will burn battery.
Similarly delete your wifi connections and add back when required.
Turn off wifi is not connected to wifi.
Any "hunting for connection" in email or wifi will burn up battery. -
I solve my problem of black screen when starting up my Mac pro, namely by using the lighting button and then i saw the login screen. Hopefully it works for you.
It was the PRAM.
-
HT201401 my iphone has a frozen screen and it does not turn off to reset. what do I do?
My iphone has a frozen screen. It will not turn off to reset. What can I do?
Press and hold the Home and Power buttons for 15-20 seconds until the white Apple logo appears to reset the device.
-
my iphone has a blank screen no apple logo and wont turn on. my computer wont pick it up either, what is going on?, my iphone has a blank screen no apple logo and wont turn on. my computer wont pick it up either, what is going on?
You repeat yourself frequently frequently. Perhaps your iPhone is not charged.
Too, you might look in the section "More Like This", right over here -----> -
Got black screen on start up of iMac help
Got black screen at start up
HelpHi, see if this can be done...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions. -
Macbook pro-Freezes with black screen at start up.
Macbook pro-Freezes with black screen at start up. I've tried inserting the Mac OS X install disc to run the hardware test(Restart and hold down D), But it still does nothing. Just the black screen. Now I can't get the disc out. I've tried holding down the track pad key upon start up but that doesn't work neither.
What do I do??? Please help.Remove the battery to find your serial number in the battery bay. Then you can look your MBP up on EveryMac.com:
http://www.everymac.com/ultimate-mac-lookup/
That will give you all the information on your Mac.
This is assuming that you have the MBP with the removable battery and not the unibody. The unibody has different graphic chips.
Good luck!
Message was edited by: S.U. -
Issue: One day I unplug the power, the screen freezes and I get frozen music sound. I shut down, start up, I get 3 beeps (1 short 2 long), which indicates a Video failure according to the Thinkpad Laptop beep code list.
How I solve the issue day-to-day: I turn the heat up - I disconnect the battery and hard drive and plug in the power then turn it on. I will wait until the underneath is searing hot with a blanket blocking the fan's flow of air, I mean way hot because any
cooler and it won't start. Plug stuff back in, Hard drive first, Battery second, turn off with power button hold, unplug power, replug power.
I turn it on, no beeps, it goes past the first Lenovo screen, then gives me a prompt because it "didn't shut down properly" and continue regular startup. What happens next is the Windows logo appears,
and just as the animated windows logo starts to move (you see 2 small colored dots on the screen), it freezes. I see this every time, I know naturally that it means that the laptop is still too hot to go past that point, so I shut it down and try again. After
about 5 - 10 tries it will go past the splash screen and into the login area, then it's all fine.
Sometimes when I unplug the power from the back by accident it will freeze. By accident I mean that the connector wiggles it's self out easily. This unplug freezing thing started happening about 1 week before the 3 beep black screen problem started rolling,
so I'm putting 2 together.
Errors:
I got a Blue Screen of Death the first time I started it up with the overheating ritual, but I never got it since. It was 0X7B.
I got another Blue Screen of Death about a week ago, but came as it was on already and I had been using it, and said something about disabling Cache or Shadowing in BIOS. I never got it since.
Event Viewer events found:
1. Kernel-Power, Summary page.
There are critical events for a few things like Kernel-Power, Event ID 41, Task Category (63). There are 19 of them, each day 1 or 2 of them but mostly 1, so this maybe corresponds to my daily ritual.
"The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
2. Kernel-Processor-Power - Event ID 37, task category (7)
"The speed of processor 1 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 71 seconds since the last report."
3. LMS - HCMI - Event ID 2, Task Category: none
"LMS Service cannot connect to HECI driver".
I came across a very sluggish performing control panel for Nvidia before and after this problem, and I tried installing a newer version, which I had to jump through a few hoops to do, like uninstalling first, not just updating. At first it said that the
driver wasnt for the system, which was wrong. I made it work somehow, but it was still sluggish. I rolled it back to an earlier driver, and now it works fine. No sluggish performance / slight freeze window thing going on.
MSCONFIG.exe, Boot Advanced Options: I have tried twice to change this 1 setting, check box "Number of processors" and change to 2 processors, because I do have 2 processors. I have been able to change
this in the past, but it does not save the setting now, and I believe this option was selected before I started having problems, and settings did not disappear then.
What could this be. The small round BIOS battery? The video card like everyone presumes? (I.E. the entire motherboard replacement), Software? The wiggly power input area? (Not enough power getting in?), Firmware of some sort? The BIOS software being wrong?
SYSTEM INFO:
Thinkpad T61p 6457-A24, Intel core 2 duo (T7700) 2.4GHz, Intel 120GB SSD 6Gb/s, NVIDIA Quadro FX 570M (256 MB),
Windows 7 64 bit Home Premium (6.1, Build 7601), BIOS Ver 1.00PARTTBLx
Display: 1680 x 1050 (32 bit 60 Hz), Integrated RAMDAC, Main driver: nvd3dumx.dll,nvwgf2umx,nvwgf2,
Version 8.17.12.9688, Date 5/31/2012, DDI version 10, Driver model WDDM 1.1
Please excuse the small text at the beginning, there isn't an option to un-do that error.You are very wrong about that mystified. What do YOU think made my computer work without beeping at all hu? (I bet you're gonna tell me). I figured it out.
RE-INSTALL WINDOWS 7 OS.
SOLVED.
DOESN'T BEEP ANY MORE.
THAT IS A PART OF microsoft ISN'T IT.
::: EGO KILLER 9000 ::: -
Mid 2010 Mac Pro, Black Screen on start up. Video works after I turn machine off, let it cool
My Mac Pro is acting up.
If I do a reset after its beenruning for a period of time I get a black screen at start up. I have tried multiple different monitor cables and nothing seems to work. It does seem to resart and I can here the start up chime but no display. If I unplug the machine and let cool for 1/2 ~ 1 hour it then turns back on with no problem.
Processor 3.33 GHz 6-Core Intel Xeon
Memory 24 GB 1333 MHz DDR3 ECC
Graphics ATI Radeon HD 5870 1024 MB
Software Mac OS X Lion 10.7.4 (11E53)
Display is the 27 inch cinema
Any ideas? Bad graphics card?AC if you used it this once would pay for itself. Same for a good solid UPS - a good one can stop that 1/100,000 surge that takes out a modem (if you filter of course).
I've known people that never knew you could filter coax cable or dsl and we get enough severe storms it has been, not if it happens, but when.
Unlike the X1900 which had a air chamber and would cause clogging you really should not need to and be pulling it out to clean dust all that much if at all.
People have gone through 2 or 3 ATI 5770s and some 5870s due to what are probably design or bad batches especially the first months run. -
Presario f700 black screen at start up,
presario f700 black screen at start up, if left to own it flashes hard drive light once fan starts then turns off the starts again can get it to stop this sequence by pressing certain keys but screen always stays black and remote screen does not turn on. Have tried removing memory, hard reset, removed ram, have tested hard drive out of device. Anything else I can try.
Book says 15secs for a hard reset, one post said 30secs, which is correctHi, 30 secs is the better of the two options there. I am assuming the Hard drive tested fine? You can try turning the computer on with out the hard drive in it and see if you atleast get some text saying not bootable device or if you are able to boot into BIOS. If this does not happen you can switch out the ram chips. (boot with one chip then take it out and boot with the other) see if these work. If these steps fail its more than likly more of a hardware issue with the systemboard.
While I may work for HP, my posts and replies are my own and should not be mistaken for statments made by HP as a whole. -
NB 305 black screen on start up
My NB305N410BL displays a black screen on start up. It had worked fine the prior night. You can hear the "beeps" for the start page but no mouse or image ever. Any ideas on the problem? Thanks, Karen
Try this, disconnect the battery and charger. Hold the power button for 15 seconds and reconnect everything and turn on the computer...hopefully this helps you fix the issue...
-
I have a black screen at start up on my PowerBook pro. I installed lio
I have a black screen at start up on my MacBook Pro. I installed Lion and it worked fine.
emanuelbrown wrote:
@tjk Thanks! My mother-in-law (also named Barbara, ironically) started having this issue this morning, so I've been looking into this. It seems to be a fairly widespread problem which makes me think that Lion (10.7.x) has exacerbated some issue with the card that may have already been in place. from everything I've seen, its a display-only issue (no data corruption, unless you force reboot). Still very frustrating for folks though.
Actually, thank you! I'd probably still be beating my head against the wall. That did ring a bell with another link I had stored: http://arstechnica.com/apple/news/2011/08/buggy-nvidia-drivers-giving-2010-macbo ok-pro-owners-lion-upgrade-headaches.ars
Don't know if it's related or not (and don't have the inclination to read all of them right now), but there it is. Will stay tuned for any new info. Again, good work and thanks! -
my iphone 3gs shows white screen i restored it in itunes then to same problem once i connect my phone to charge i can hear the sound and if i put for silent mode i can fell the vibration so what the problem in my phone
Here is what you should do turn the device on hold the home button and the power button until the device turn off keep holding and when the device reboots release the power button but hol the home button until it shows the iTunes logo then restore it
-
cannot reinstall windows 10 Technical preview after getting black screen at start. will not let format drive or install
you may need to use a DVD from an earlier version of Windows or slave the disk to wipe it with disk manager
Place your rig specifics into your signature like I have, makes it 100x easier!
Hardcore Games Legendary is the Only Way to Play!
Vegan Advocate How can you be an environmentalist and still eat meat? -
My iPhone 4s is stuck on the "connect to itunes" whenever I tried to turn it on. But at the moment I don't have a computer and I really need my phone on right at this moment. Is there anyway I can get it to turn on without a computer??! Thanks!
i tried to connect it but it didnt work...nothing changed...
Maybe you are looking for
-
MacBook Pro will not go to sleep
When I close the lid on my laptop the computer conitnues to run and gets extremely hot.....
-
Can't download the itunes onto my new computer...
I was using my husbands computer and have mine set up finally. I try to setup and download so I can download music and use my files on this computer. It says on the main screen thank you for downloading, but nothing else happens. I can't figure out w
-
Question about Shuffle By Groupings
I listen to a good deal of classical music and lately this has become more and more frustrating to do on itunes. Most classical works have more than one movment a peice, and it is continually frustrating to see even with group shuffle on one song out
-
In my opinion, the text input box should better filter and strip out advanced html formatting when stuff is pasted. Here are two examples: http://forums.ni.com/ni/board/message?board.id=170&view=by_date_ascending&message.id=282858 http://forums.ni.co
-
Help in registering as iOS Developer
I want to register as an individual registered iOS Apple Developer but Apple ask for my Area Code number. I live in Singapore and I don't think there is any area code in Singapore. Please help. Singapore phone number format: +65 xxxx xxxx