My iPod has died from a dead battery, but when i plug it into a power source, it just keeps giving me the apple logo and a darkly lit screen and sometimes flashes white. Is there anything i can do to fix it or do i have to get it replaced?
My iPod has died and wont load back up. What do i do?!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
For some reason when I plug my phone up to charge it just keeps showing me the apple logo and then it goes away shows the battery sign is low and that its charging. So I'm wondering why it wont turn on would I have t get a new one, and would it be free
If you've tried the basic troubleshooting steps (restart, reset, restore from backup, restore as new), and you've tried charging from a wall socket and these all fail, then you have a hardware problem.
If your unit is still in warranty, you will be eligible for a replacement with a refurbished unit free of charge. If you are out of your warranty period, you will be eligible for an out of warranty exchange which will cost the equivalent of 200 US dollars. -
I have a macbook and when I power it on and then select myself as a user...It won't power up. It stays in the white screen with the apple logo. I am online currently under 'guest user'. Is there anything I can do from the keyboard to fix this??? Help!!!
Could you specify the model of MacBook and the OS X it's running, please? Some of the advice or references vary along with the system, so this could be helpful to formulate a reply. I've never used a Guest User selection, but do have more than one User.
If the computer does not have an optical drive, you may be able to boot it into a recovery disk mode or something; in an attempt to see what is wrong and maybe fix it.
Good luck & happy computing! -
It has been on this black screen with the apple logo and some small white writing at the top of the screen for many hours. I've tried rebooting it and connecting to iTunes but nothing has worked.
PLEASE HELP!!!!!!!!It likely means there was still water inside it and something has now shorted out and permanently damaged one or more components. THE very worst thing you can do with wet electronics is energize them - even a small drop of water inside on any of the circuitry or electrical contacts can cause catastrophic damage.
Take it to Apple for a free evaluation, but most likely you will need to replace it. For the out of warranty fee ($269.00 USD) you will get a refurbished replacement (like new, with a factory new screen and battery). An out of warranty replacement will also re-instate your remaining warranty, or 90 days warranty, whichever is longer. -
I have an ipod 5 (IOS8) and two days ago my ipod died and when I tried to on it after charging it would turn on to the apple symbol and after about 5 minutes it would shut off. Another problem is that i also have a jammed home button. Is there anyway i can fix my ipod?
Try:
Turn on without Home/Power Button -
My Ipod touch is acting very annoying. When i press the sleep/wake button to turn it on it just turns on with the apple logo and stays there. The screen will then blink white occasionally and the process will start again. Once when it turned white. i pressed the power and home buttons at the same time and then the above process continued.
Sounds like your iPhones software may be corrupt. Try placing the iPhone into recovery mode. To do this, follow the steps in this article:
http://support.apple.com/kb/HT1808
Hope this helps
- Greg -
I have recently purchased a used iPhone 4, when I pulg it into my pc a skull icon appears instead of the apple. The pc also does not recognise the iPhone. The phone was originally purchased in March of this year, so it is under 12 months old. Has anybody encountered this problem and or know how I can fix the phone? Thanks
You have apparently purchased a jailbroken phone. You can try to get it into recovery mode, then restore as new, but no guarantee it will work.
http://support.apple.com/kb/ht1808 -
My macbook pro says Shockwave Flash plug-in has crashed pretty much every day. I have to shut the computer down and restart to fix it. Is there any way I can keep this from happening?
Download the latest version from here ONLY:
http://get.adobe.com/flashplayer/
also, make certain your Mac OS X software is completely up-to-date. There is a Trojan Horse that pretended to be a Flash update, and installed Flash with malware included. The latest security updates removes the malware and all older versions. -
I desperately need it to work again. please help!
What "Loading symbol" are you talking about?
-
My iPod Touch is stuck. I can't get it to power off. All that comes up on the screen is the Apple Logo. Is there anything I can do to fix this problem?
You may need to hold the sleep/wake button and the home button until the apple logo appears. Or anther thing you can try is draining the battery until the battery is dead. That's what i tried and worked. You may need to do those things more than 2 times. OH anther thing is you can try connecting you ipod to your computer and see if it appears on itunes. If those don't work you can send it to apple. So that's what helped me I hope I answered your question.
-
My MacBook Pro died suddenly when I was removing a flash drive (LG up3 neon ps4) and is now both unresponsive and cannot be charged. Troubleshooting.... Is there anything I can do to fix it on my own? (There aren't any apple stores in my current country)
Hello antol1n1,
Sorry to hear your MacBook Pro is not charging or powering on. Sometimes a System Management Controller reset can help with the following charging and power issues:
Power
The computer doesn't respond to the power button when pressed.
A portable Mac doesn't appear to respond properly when you close or open the lid.
The computer sleeps or shuts down unexpectedly.
The battery does not appear to be charging properly.
The MagSafe power adaptor LED doesn't appear to indicate the correct activity.
To reset the System Management Controller on your MacBook Pro (with a built-in battery) , you can follow these steps:
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
You can find more information in the full article here:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
I hope this helps!
Best,
Sheila M. -
Hello! I bought an iPod touch 3rd gen at a pawn shop and when i tried to set it up, it would not connect to my iTunes OR Wifi so that I could finish set up. Is there anything I can do to fix this before i take it back and get my money back?
Take it back for a refund.
-
When I downloaded iOS 6 my iPod keeps crashing when on the App Store! Do you know why this is happening? Is there anything I can do?
Hello my iPod keeps crashing when I downloaded iOS 6
Is there anything that I have done wrong?
My iPod is a is a iPod touch 4th gen.
ThanksKnown problem. See:
IOS 6 App store crash: Apple Support Communities -
I've just upgraded to the Iphone (4) update and now battery life of the poor is very poor (3 hours). Is there anything I can do to fix this?
there is wifi encryption password and appleID password and then your imap or pop3 password
-
I enrolled in weight watchers online only to find out that I can't access some of the tools I need because I need adobe flash player is there anything I can do. I've already paid for the service!!!!
Send a stiff email to Weight Watchers to suggest they need to remove their software videos from the FAT and BLOATED Flash container and trim down to HTML5 in the future if they want to stay on program.
In the mean time you are going to have to employ work arrounds with your iPad.
Try the Skyfire browser app, This can convert some flash content remotely into a viewable format playable by Quicktime on your iPad.
Its not however guaranteed to work on DRM protected material and its very likely these Weight Watchers videos are so protected I am afraid to say.
Other apps such as iSwiffer attempt streaming of flash but are slowed due to band width.
You could also use a VNC type app such a Splashtop to stream direct from your PC to your IPad however sound is not guarranted to work with these apps.
Finally the most satisfactory solution at the moment plunk yourself down in front of a PC/Mac or Linux box and watch the flash their.
Maybe you are looking for
-
Years ago a family member used an Apple IIe (which is still functional including 5.25" floppy drives, printer, etc) to create some personal financial files with VisiCalc - the spreadsheet of choice at the time. We can read the files on the IIe and ev
-
Data updation from R3 to CRM using CRM_DATAEXCHG_BADI.
Hi, While transferring the data of equipements from R3 to CRM, we want to transfer the status of the equipement (data element J_STACT). I am using IF_EX_CRM_DATAEXCHG_BADI~CRM_DATAEXCH_R3D_MBDOC_FILL to update the status before transferring the data
-
I read that with new device I would have iWorks available. Please help. The problem is also that I have another 5C - company phone, where I have it. But on different ID, because I did not want to mix it. This is annoying. May I for example switch my
-
Problem with spanish characters
Hello I am using an existing and proven app written in visual foxpro with a recently installed Oracle11g database (have done this before without problems) I am using Microsoft ODBC for Oracle and have no possibility of changing this. (always used thi
-
Hi All, How can i get the local host name from applet ( Host name where the applet running) . While i tried with InetAddress i got only the loop back address 127.0.0.1. Can anyone help me out in this regard. Thanks in advance V.S.Saravanan