My ipod nano 4th generation will plug into itunes and if i push buttons i can hear music, however the whole time the screen is black so its a guessing game. how do i fix this?

my 4th generation ipod nano works but its a guessing game. the screen is totally black even when plugged into my computer. itunes still recognizes it. is the screen broke is it the backlight, any suggestions how to find out or to fix this? oh and ive completely restored the ipod several times. i let someone borrow it and this is how i got it back so i dont know what caused the problem.
Message was edited by: robynd369

I checked for anything either bent or broken, and as far as I know everything looks fine, though I could probably clean out the dust and dirt collected in there after a year. I could take a picture if that would help. Would being dirty inside there cause this to happen? It's one thing I guess I never thought of and probably should do.

Similar Messages

  • My ipod nano 4th generation will not turn on, and is no longer detected by the computer and itunes. What to do?

    help me please !!

    Sounds like a dead battery. Take it into your local Apple store/Genius bar and see if there is anything they can do for you.  Another option is to send it in to a third party repair company who can replace the battery at a pretty low cost.
    B-rock

  • My ipod nano 4th generation will not turn on or charge.  It is just sitting (frozen) at a black screeen.

    My ipod nano 4th generation will not turn on or charge.  It is just sitting (frozen) at a black (blank) screen.  What do I do?

    Hello, HJA-heartgirl. 
    There are a couple things you can try to troubleshoot this issue.  Below, I have included a couple articles that will help you troubleshoot your iPod.
    How to reset iPod
    http://support.apple.com/kb/ht1320
    iPod nano (4th generation) Troubleshooting Assistant
    http://www.apple.com/support/ipod/five_rs/nano4gen/
    Regards,
    Jason H. 

  • My Ipod nano (3rd Generation) will not play itunes u. It Justs restarts everytime I try to play it.

    My Ipod nano (3rd Generation) will not play itunes u and some other MPEG stuff. It Justs restarts everytime I try to play it.

    Hello, Grover,
    This forum is for questions from people who administer iTunes U sites. You'll be most likely to get help with this issue if you ask in the iPod nano forums.
    Regards.

  • My Ipod nano 4th generation will not charge or turn on! Please help

    I bought a refurbished Ipod nano 4th generation 2 weeks ago from a good reliable ebay seller. It arrived and was in great working order with no issues what so ever. However this evening I realised it was out of battery, so I went to charge it and nothing. No light up, no recognition of it being plugged into the PC or when I try via a plug socket. I have contacted the seller about this asking for a refund as I have not done anything or put it anywhere that it would die like this. However I thought before I try to send it back I would try here and see if anybody knows what may be wrong with it.
    Thanks

    You need a new battery. 

  • My ipod nano 4th generation will charge and put music on it but it won't turn on??? help :-s

    i found my ipod 2 weeks ago and i put new music on there and sometimes it would not want to connect to the ipod and it kept saying (Disk space or something like that) but once i unpluged it and i tried to turn it on, it won't i have tried to rest it and i really want this sorted out and not get a new ipod and to listen to my music that i just put it on there :-/ PLEASE HELP

    Hello, HJA-heartgirl. 
    There are a couple things you can try to troubleshoot this issue.  Below, I have included a couple articles that will help you troubleshoot your iPod.
    How to reset iPod
    http://support.apple.com/kb/ht1320
    iPod nano (4th generation) Troubleshooting Assistant
    http://www.apple.com/support/ipod/five_rs/nano4gen/
    Regards,
    Jason H. 

  • HT3302 My Ipod nano 6th generation have drop into water and how much the repair cost

    My iPod Nano 6th Generation acccidentally put into washing machine,it cannot open now.
    i decide to repair it,how much it cost ?(my iPod still under the warranty)

    Here is Apple's pricing: http://www.apple.com/support/ipod/service/prices/
    You may find that it is cheaper to have it serviced by a third party company, but the decision is up to you.
    By the way, this is the iPod Touch forum.
    B-rock

  • Error I get when iPod Nano 3rd Gen is plugged into iTunes: The disk was not ejected properly. If possible, always eject a disk before unplugging it or turning it off.

    I have an iPod Nano 3rd Generation (2007), and When I plug the USB in and all that, the Apple logo appears then goes to menu quickly, then to a "Connected" screen, and it shows up in iTunes for about 5 seocnds before I get this error:
    "The disk was not ejected properly. If possible, always eject a disk before unplugging it or turning it off."
    .....I have no idea what to do, so help! please

    have you tried using the Restore option in iTunes to reset the entire iPod?

  • What do I do when my iPod touch wants me to plug into iTunes and asks for a password on the iPod touch and can't do it?

    What do I do when the iPod touch asks to be plugged into it ouch and nothing happens. The PC asks to use password on iPod touch and it can't be done.

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • Ipod, nano 4th generation, will not charge using my PC or my dock.  It's 5 years old and has charged using both methods since I got it.

    My ipod will not charge when connected to my dock or my computer.  I will play when connected to both.  I have tried both USB ports, checked the connections on my dock (power light is on) and it will just not charge. 

    Howdy Crickety22,
    Using the USB cord in different locations is a great way to help isolate this kind of issue. Since you have done that, the next step I would recommend is testing a different USB cable with the device.
    Check out this info from the article named Archived - iPod's battery doesn't charge found here http://support.apple.com/kb/ta44551
    Faulty cable
    If something is wrong with the FireWire or USB cable that came with iPod, it may not supply any power to charge the battery. Note: Only iPod models with a Click Wheel can get power from a high-powered USB port using the supplied cable (includes iPod mini, iPod (Click Wheel), iPod photo, iPod with color display, iPod nano, and Fifth Generation iPod).
    Make sure you are using the cable that came with iPod. Some third-party cables may not work properly with iPod.
    Make sure nothing is in or blocking your computer's FireWire or USB ports.
    Check the connections to make sure the cable is completely plugged in.
    Try another known-good FireWire or USB cable if available.
    If this resolves the issue your FireWire or USB cable needs to be replaced. You can arrange for replacement at theiPod Service Website.
    And this part as well:
    Faulty dock connector or FireWire port on iPod
    If something is wrong with iPod's FireWire or Dock Connector port, it may not supply power to iPod.
    Make sure nothing is in or blocking iPod's FireWire or Dock Connector port.
    Check the connection to make sure the FireWire or Dock Connector cable is completely plugged in.
    If this did not resolve the issue iPod needs to be repaired. You can arrange for repair at the iPod Service Website.
    Regards,
    Sterling

  • What do you do when your ipod nano 4th generation will not turn on even if you charge it?

    i have a 4th generation ipod nano and it died so i tried charging it for an hour and it wouldn't turn back on. then i connected it to my computer and it would not even turn on or show up on my computer. What do i do?

    You could try taking it to a Mac store and see what they have to say, but it might just be dead.

  • My ipod nano 4th generation will not sync

    I am trying to sync the photos onto a new computer but it does nothing

    it is usually one way from pc to ipod nano, not the other way around

  • My iPod nano, 6th generation, will not stop playing and none of the buttons will work

    I listen to audiobooks.  My iPod was fine, I just checked how far I was in this chapter.  I checked again 2 minutes later and I cannot get the screen to lite up nor can I control the volume.  But my book continues to play.  I plugged it in to charge with a wall charger, nothing.  I plugged into my computer and again nothing.
    It is only 3 weeks old, I use it about between 1-3 hours a day.
    Anyone else have this problem?

    Have you tried resetting it by pressing and holding both the Sleep/Wake and Volume down buttons together long enough for the Apple logo to appear.
    B-rock

  • When i plug in my ipod touch 4th generation i go to itunes and a message pops up that says"this ipod cannot be used because the apple mobile device service is not started". but my ipod came to the connect to itunes screen

    i can not get my ipod to get out of the connect to itunes page , and when i plug it in it says itunes mobile device system is not setup

    From what I know from troubleshooting all sorts of screwed-up PC devices, you should try the following steps (I have assumed you didn't try any of them, so plz don't take offence for some "basics"):
    1) Updating the iTunes on your PC, or if it's already the latest, see if you can find the individual install package of "Apple Mobile Device Support" by using Window's Search (the package should be "AppleMobileDeviceSupport.msi") and reinstall it (Uninstall the existed one first). If you can't find the individual package, I think you may find a downloadable one online, or if you want to simply the process, just reinstall the whole iTunes.
    2) If problem remains, check if there's any "application/service monitoring function" on your anti-virus/spyware program, and find if "Apple Mobile Device Support" is on its "blocked list", remove this entry when you find it.
    3) Check if there's any "Registry" clean-up software/function in a software, or whether you've altered any apple-related or unknown registry entries. If it's a yes, see if you can find the most recent Registry backup before the iPod connection problem occured. In the case you do not have any backup (Make sure! Almost every Registry clean-up software would back-up Registry before any cleaning process. You can find them in this software's directory), simply use the "system restore" program of Windows to restore your computer to the latest point when iPod's connection with PC was still functioning.
    Since we can't find any problems with "Apple Moblie Device Support" from above steps, let's refocus to the hardware part:
    4) Restore the "setting part" to default on you iPod, if you don't want to wipe clean your setting now, try below steps first.
    1) Plug in your iPod to other USB port, if it doesn't work, try plug in other devices to check if there's any problem with your USB ports or USB's drivers on PC. (If there is, try 'roll back' the USB driver's version by entering to its 'property' on right-clicked menu, if still doesn't work, maybe the USB ports are broken-down)
    6) Go over the steps and check if you've tried everything. The latest choice I'd advise is to check if you can find another "USB cable" for iPod and plug-in so you'd know if the original is broken.
    Well, that's about all I can think of. Good luck and post your questions if you need any clear-up.

  • My ipod nano 4th generation will not turn on when i rstart it it gets stuck on the apple icon screen what do i do

    my iPod will not turn on when I charge it or restart it it just gets stuck on the apple icon screen what do I do to fix it

    Hello crimsonflare,
    Try this first:
    Apple - Support - iPod Troubleshooting Assistant
    If that does not work, use this:
    Putting iPod into Disk Mode
    and try to restore you ipod.
    Hope this helps.
    ~Julian

Maybe you are looking for

  • Error while creating Installation

    Hi Experts, while creating installtion ( T.CODE :ES30 ) , i am getting following error "Error in reading table EUISTRUTYPE" I open this table and its regarding PoD Structure Category. So I have to maintained the proper IMG settings for POD structure

  • Adobe Download Assistant keeps crashing

    I was trying to install adobe creative master suite trial on to my mac but adobe download assistant continued to crash before it opened. I am using the latest version macbook pro and i have attempted to download other program trials but it does the e

  • Monitor won't wake up with Mac Mini

    I am using a Mac Mini (late 2012; OS X Mountain Lion 10.8.2) connected via HDMI to a Samsung Syncmaster S27B350 monitor.  When the Mac wakes from sleep, the monitor will wake up for about 5 seconds and then go black.  If I unplug the monitor from AC

  • ITunes dont transfer the first song of all albuns!

    Hi i have a ipod touch 4S, 32gb When i transfer the music from itunes to the ipod, all the songs go, but the first music, of all albuns that i have on the computer are missing! And on the ipod menu, on itunes, the first's songs appears as grey, with

  • Authorization checks programmatically

    Hi, Is it possible to do authorization checks programmatically inside Weblogic server in such a way, that the checks goes all the way down to the AuthorizationProvider implementation? In effect, I need some API to call, that in the end, calls the SPI