My Ipod won't switch on

It died a few weeks ago and after a couple of days just came back to life.  It has happened again (2 days ago).  There has been no drops/accidents or anything catastrophic - why is this happening?

Could be a hardware probem ir software problem. If itr stillhappens after restoring to factory settings/new iPod that oints to a hardware problem.
If it happens again try the following:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Similar Messages

  • My classic video ipod won't switch back to regular video mode after using it on an elliptical. The port still allows me to charge and works on the elliptical and treadmill but it will no longer change modes to allow me to watch my shows on the ipod screen

    My classic video ipod won't switch back to regular video mode after using it on an elliptical. The port still allows me to charge and works on the elliptical and treadmill but it will no longer change modes to allow me to watch my shows on the ipod screen

    From the iPod's Main Menu choose Videos -> Settings and make sure TV Out is set to Off.
    Otherwise, try a hard reset as well.  To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
    B-rock

  • My mini ipod won't switch on or charge

    My mini ipod won't switch on or charge. I have tried charging it several ways - via the pc, plug and incar charger but no luck. The pc does not recognise the ipod. I have tried toggling the hold switch. The usb ports on the pc are ok.
    The last thing that I did with the ipod was detached from the pc when it had the message to do not disconnect.
    Can anyone help
    thanks
    Anne-Marie

    See these.
    iPod shows a folder icon with exclamation point when you turn it on.
    iPod won't turn on.
    iPod battery doesn't charge.
    Your Windows PC doesn't recognize the iPod is connected.
    iPod only shows an Apple logo and doesn't start up.
    Putting iPod into disk mode.
    Restoring using disk mode is often the key.

  • IPod won't switch on after down load.

    I have just down loaded the latest iPod updater 2006-01-10 onto video iPod, and as soon as it was down loaded my iPod switched itself off. I have followed all the instructions from the help pages. Still I can't get my iPod to switch on.
    Can anybody help
    30GB Video iPod    

    Hi Geordie 74!
    Here is an article that will help you troubleshoot this issue with your iPod touch:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • I've added to ios6 to my new ipod touch with no problems. I'm trying to now restore the factory settings but the screen is frozen with an itunes sign and lead pointing towards it. The ipod won't even switch off. Can anyone help as it's driving me crazy

    I've added ios6 to my new ipod but tried then to restore the factory settings. It won't extract any settings and the itunes then tells me that the server cannot be reached or is unavailable. I've been trying all day. Now the ipod has a itunes sign and a computer lead pointing towards it on the screen and this is frozen. It won't switch off or do anything else. Any ideas as this is now driving me crazy.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My ipod touch is showing a usb pointing to the itunes logo on the screen and nothing else.  It won't switch on beyond that.  Please help!

    my ipod touch is showing a usb pointing to the itunes logo on the screen and nothing else.  It won't switch on beyond that.  Please help!

    Sounds like your iPod is in restore mode. Connect it to iTunes. iTunes will pop a little message up saying that your iPod is in restore mode and asking you if you want to restore it, click yes. Your iPod will restore to factory settings and you will be given the chance to restore from a backup. You can do this or set it up as a new iPod.
    Here is Apple's page on restoring your iPod.
    http://support.apple.com/kb/ht1414
    Hope that helps.

  • My iPod nano won't switch off

    I've just bought a nano iPod and for some reason unknown to me it won't switch off. Everytime I hold down the menu button nothing happens, or when something does happen, the apple logo comes on the screen for a few seconds (as it does when you reset the iPod) then it goes back to the 'home' screen on the iPod again. I've tried the '3 R's to sort this out, and since I updated my older iPod as well, that has refused to switch off too. PLEASE help me.

    Everytime I hold
    down the menu button nothing happens,
    Hi,
    Is that a typo? You press the play/pause button to turn it off
    Regards,
    Colin R.

  • My ipod mini won't switch on and i cant live without it !

    My ipod mini won't switch on. I had been having problems for a few weeks before, transferring song lists to my ipod from the pc, showing the message "attempting to copy to the disk failed. An unknown error occured (-36)". I don't know if this had anything to do with my current problem. After un-installing and re-installing the latest version of installer, I went to switch my ipod on a few days ago and all that it showed on the screen was about half of the battery charging icon that usually fills the screen. I switched the ipod off again but when I tried to switch it back on, nothing happened. please help !

    Tried these?
    The Five Rs.
    "Disk cannot be read from or written to" error syncing iPod in iTunes.
    iPod won't turn on.
    iPod battery doesn't charge.

  • My iPod won't show up in iTunes but it does in my pc, isn't iTunes problem!

    My iPod won't show up in iTunes, but it does in My Pc. And I want to say that is not an iTunes problen, cause I have an iPod nano, and it works perfect with iTunes and with windows. My iPod won't show up in any computer at all, so I have read all the articles here in Support, and none of them give me a solution. I need to restore my iPod but I can't cause doesn't appear in the source list in iTunes. Do I have to send it to Technical Support? Please Help Me someone, cause I've been posting messages for one week now, and I haven't got an answer!! Pleaseee!!

    You can try putting it into disk mode to see if it makes it easier on iTunes to recognize it.
    To put your iPod into disk mode:
    1) make sure your hold switch is OFF (NO ORANGE SHOWING)
    2) hold the menu button and the center button at the same time for about 6-10 seconds until you see an apple logo
    3) AS SOON AS you see the apple logo, release the two buttons and hold down center and play/pause
    4) If you've done this properly you should now see Disk Mode Ok To Disconnect with a checkmark (when connected to your computer you should see Do Not Disconnect with Disk Mode at the top)
    After you have the iPod in disk mode...see if iTunes picks it up then.
    Keep me update.
    -Wyett

  • My new ipod won't sync with itunes and does not show on windows

    Hi
    I got a new ipod nano gen 7 to replace 2 old ipods that were stolen.  the problem is that it won't sync at all.  When I plug it in it charges, but my windows 7 browser doesn't see it, and neither does my itunes.  I have Mcafee security and I have updated itunes, windows and checked my mcafee settings as per other users issues on the web and it still isn't working!  If I plug it into another computer though it works fine.
    Have tried - resetting ipod, downloading upgrades, switching firewall off.
    No idea what else i can do!
    Help!

    Hi I am having the same problem and I saw that u fixed it on your own...how?

  • Ipod won't work or update

    I was trying to upload my itunes files onto my video ipod which I got in January 2006 and left the room, came back later and the "Do not disconnect" screen was up on my ipod and itunes had stopped responding. I've tried shutting down the ipod, restarting my computer and using the ipod updater but nothing happens. It's still staying on the "Do not dsiconnect" screen and when I start up itunes my ipod won't even register as connected. What do I do?

    First of all, try another port on your computer. Some ports are not connected direct to the motherboard and do not recognize the iPod as well as those that are. Reset the iPod each time you connect it to another port.
    Still no joy, see these.
    Your Windows PC doesn't recognize iPod.
    iPod appears in Windows Explorer but does not appear in iTunes.
    iPod does not appear in iTunes.
    Fast user switching in Windows XP is not supported.
    Strange iPod behavior.
    When restoring the iPod, put it into disk mode first.
    Putting iPod into disk mode.

  • Help! iPod won't work or connect to XP

    Please choose the appropriate forum for this topic. Thank you. All the music was erased off my 5G 30GB iPod Video last week for some reason (interestingly, the photos were still there). When connected to iTunes, it gave me an error message about needing to "reinstall the iPod software."
    Today, I got a new hard drive and installed XP Pro on it. I connected the iPod via USB and the little taskbar bubble popped up saying "Found new hardware -- iPod." Next, I installed the iPod + iTunes software from the CD, restarted the PC and run iTunes. My PC and iTunes didn't indicate that the iPod was connected, so I plugged the USB cable into another slot -- nothing. (I know it isn't the USB because I plugged in a thumb drive and it works fine). I've also tried to update/restore the iPod... but alas, I can't because it's not recognized.
    What happened to the iPod is even stranger. After the hard drive was wiped, I was able to turn it on and off and view photos. Now, it only displays the white Apple logo with the black background. The backlight keeps switching on and off randomly, the iPod won't turn off, and the hard drive is making the same noise it does when you change a song, only every few seconds (I assume it's doing this because it keeps turning the backlight on and off constantly).
    I've only been able to use the iPod one week out of the two weeks I've had it -- and I'm really disappointed about it. Will I have to send it back to Apple? (hopefully under the 30 or 90 day warranty, whichever I qualify for)
    Help is appreciated.
    Luke
    5G Video 30GB   Windows XP Pro  

    In order to restore it, it has to show up on the desktop, I think. It doesn't. I downloaded the software, and it's waiting for me to plug in the iPod (which is plugged in).
    I actually have been reseting it every minute or so since I read your post. Before I restore it, the battery icon doesn't show any lightning bolt or motion. Then if I restore it, it appears to be charging for a short time. I was wondering if I was going to have to charge it in lots of short increments (I don't have the optional charger).
    I dug out the manual from under the desk. And it says that if it is extremely low on power, I may need to leave it charging for 30 minutes before it is recognized. I think from a sentence in there: "Leave iPod mini connected until at least the battery icon animates." So, maybe it is actually charging when it appears to be unconnected and has no lightening bolt.
    I've turned it off and left it plugged in and am waiting for a charging battery icon to appear. If that doesn't work, I will try leaving it on and plugged in (so far it just turns off when I do that). Again, any suggestions are welcome.

  • IMessage won't switch to "on."

    My iMessage won't switch to "on." When I press the button to switch it on, it immediately switches back to "off." I am connected to WiFi but do not currently have the SIM card in because I am in another country. I am using the iPhone like an iPod Touch. I have an iPhone 3GS. How do I fix this problem? I've restarted it, restored it, everything...

    I got my iMessage to switch on, by completely resotring it on Itunes. I tried everything but I can;t get iMessage to work. Like its activated but the msgs just wont deliver. I'm currently overseas now, in UAE. The thing is, when I go to iMessage and click on my Apple ID it shows the iMessage Account. And then I went to change location, it shows you a list of countries. I cant find UAE!! So I think the country as a whole blocked it. Like they once blocked BBM for blackberry (They finally allowed it) but I think its the same with iMessage. Absolutely ridiculous.

  • Ipod Won't Sync, gives several error messages

    I have been having trouble with my itunes lately. Whenever I try to plug my ipod into my computer when itunes is up, the error messages "The ipod "Alexander's Ipod" cannot be synced. The required disk cannot be found" and "Attempting to copy to the disk "Ipod" failed. The disk could not be read from or written to" come up. A few days ago I managed to get some of my songs on my ipod. I went to go back again to add more to my ipod later that day and the syncing started and was working again. It got up to all my songs on itunes (syncing like 3000 out of 3000 songs), and that message came up again. Restore hasnt worked either. I hope this makes sense. If anyone could help be out, It would be greatly appreciated.
    Message was edited by: Alexander__
    Message was edited by: Alexander__

    *Check your iPod with Diagnostics Mode*
    It's possible that your iPod's hard drive has started to fail. Take your iPod and place your right thumb on the centre SELECT button and your left on the top MENU button. Press down both thumbs for about 6 seconds until your iPod reboots. Immediately move your left thumb around to the rewind button |<< on the left and hold this down together with SELECT for a further 6 seconds. Your iPod should now switch into Diagnostic Boot mode. Press MENU for *Manual Test*, then select *IO > HardDrive > HDSMARTData* to reveal your stats. For comparison here are mine for my 2 year old 6th Generation Classic:
    Retracts: 889
    Reallocs: 12
    Pending Sectors: 0
    PowerOn Hours: 2202
    Start/Stops: 894
    Temp: Current 24c
    Temp: Min 10c
    Temp: Max 50c
    Take a note of your results. When finished press *SELECT & MENU* for 6 seconds to reset the iPod again.
    With modern disc drives sectors are no longer marked bad by a disc scan, if the SMART firmware detects a sector it has trouble accessing it will attempt to invisibly reallocate it to a spare area of the disc.
    Note that I've only 12 remapped sectors and none pending. To help explain what the numbers mean here is an extract from the Wikipedia S.M.A.R.T. article:
    *Reallocated Sectors Count*
    Count of reallocated sectors. When the hard drive finds a read/write/verification error, it marks this sector as "reallocated" and transfers data to a special reserved area (spare area). This process is also known as remapping, and "reallocated" sectors are called remaps. This is why, on modern hard disks, "bad blocks" cannot be found while testing the surface – all bad blocks are hidden in reallocated sectors. However, as the number of reallocated sectors increases, the read/write speed tends to decrease. The raw value normally represents a count of the number of bad sectors that have been found and remapped. Thus, the higher the attribute value, the more sectors the drive has had to reallocate.
    *Pending sector count*
    Number of "unstable" sectors (waiting to be remapped, because of read errors). If an unstable sector is subsequently written or read successfully, this value is decreased and the sector is not remapped. Read errors on a sector will not remap the sector (since it might be readable later); instead, the drive firmware remembers that the sector needs to be remapped, and remaps it the next time it's written.
    Large numbers of Reallocs or Pending Sectors would suggest your drive is failing and that you may need to repair or replace your iPod. Check your stats after another attempt to update your iPod. If the numbers increase that again points to hard drive failure. While it won't be good news at least you'll know it isn't some random software problem and you can decide what to do next.
    tt2

  • HT201412 Screen won't switch when i turn phone

    Screen won't switch when i turn phone

    Slide the rotation lock off >   iPhone and iPod touch: Screen does not rotate

Maybe you are looking for

  • Downloading ADobe Creative Cloud

    I'm downloading ADobe Creative Cloud and after ten hours its only a third of the way on the progress bar in running package scripts - I foolishly didn't check all system requirements first - so perhaps it can't install - I can't quit installation but

  • ITunes won't start.  No error, no message.  I've already tried everything suggested.  Anyone else?

    I've tried uninstalling everything iTunes/Apple related.  New computer, it worked for a while then just stopped.  Nothing happens when I try to open iTunes from programs, from desktop, by plugging in my iPod.  Nada.

  • Unable to set up eFax

    I have an HP Envy 110 Printer. It's connected to the web and on my network and works fine. I can get on facebook, I can download apps, I can print maps from the web, buy tickets, I can email the printer files to print. I am unable to register or logi

  • Blocked ALV sub total Display

    hi, I'm working with Blocked ALV. In my program, passed the  Fieldcatlog-do_sum = 'X' . But then also i'm not getting totals. For that what i want to do in Blocked ALV. Regards, Bab

  • Table to link Sales Org , mat, Plant, storagr loc,distribution channel

    Hi Frnds,     Can any one suggest table which is having all the fields Sales Org , mat, Plant, storagr loc,distribution channel. thanks, Y.Ravi Kumar