My itouch tellls me i need to connect it to itunes and it needs to be restored so i do that but it stops like when it says its preparimg the itouch?
my itouch powers on and says " ipod is disabled connect to itunes. and so i connect it and it says it needs to be restored and updated so i click on that. then it extracts the software and then it says its veryifying the ipod and then preparing it to restore. then after a while it says an unknown error occured .-. idk what im doing wrong please help?
What is the complete wording of the error message? Usually an error number is also provided.
Similar Messages
-
I need help. My ipad 2 was stuck in recovery mode. i tried to connect it to itunes and restore but after downloading the file and extracting the software there is a pop up message that says "the device is full. Deleting files and emptying your recycle been will help you restore." how am i going to erase files if i can't open my ipad. i dont know what to do. Its been 2 days now. please help. thanks.
yes i am sure. This are the exact words... "The iPad "iPad" could not be restored. The disk you are attempting to use is full. (Removing files and emptying the recycle bin will free up additional space". i tried some options, hard reset, redsnow, tinyumbrella but still it's stuck.
-
I have an old ipod touch and it keeps saying, ipod is disabled. I connected it to itunes and it said, sorry you need to put the passcode in, but it wont let me. And my power button doesnt work.
iOS: Unable to update or restore
-
i just upgraded my iphone 3gs to ios 6 not sure if it updated but now when i turn on my phone it says automatically that i need to connect it to itunes using the USB port but when i connect it it comes up as new hardware and cannot find a program/software for my device even though i have the latest itunes on my computer. i have tried reinstalling itunes but it still cannot find my phone and now i cannot use my phone as it is stuck on the sync to itunes screen
Have you downloaded and installed the latest version of iTunes from here:
http://www.apple.com/itunes/download/ -
I updated my iPhone software and now it is saying that I need to connect it to iTunes. I no longer have my computer with my iTunes on it. What can I do? I really don't want to lose my data! I wouldn't have updated if I had known but there was no warning.
Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Error 50: This error (and error -50) are timeout errors. Follow the steps for errors 13 or 14 above.
Above from:
http://support.apple.com/kb/TS3694 -
My iphone4 has been stuck on the connect to itunes logo for a few hours. I connected it to itunes and it says that the iphone is on recovery mode and that I need to restore it to use it with itunes. I'm afraid that if I restore it I will loose everything help please!!
AT this point whatever data you have on yoru phone is already gone since it is in recovery mode.
However you can restore from your backup, when your phone reboots from recovery.
YOu do have a backup right? -
igotmy sisters iphone 4 and imtrying tosynctomyitunes butits telling me i need to connect to her computer and im trying to make my comp the new primary
I suggest you make this your own iPhone by erasing everything on it. You will lose everything and have to start over.
Settings > General > Reset > Erase all content and settings -
I have updated my iphone with the current software but it is showing you need to connect to of itunes to activate your phone, when i did that it is continuously showing an error.please help me to get through.
Kindly Activate my phone.Rajan Gupta wrote:
...it is continuously showing an error.
See here > http://support.apple.com/kb/TS3424
Also see this discussion.
https://discussions.apple.com/message/21189708 -
When I connect my Iphone 5 to Itunes, Itunes either freezes up or I get a message saying Itunes cannot connect to this phone and I need to restore Iphone.
After uninstalling and reinstalling Itunes- issue was fixed. Thanks!
-
Need to connect a web cam and external mike to my McBook Pro running snow leopard for a Skype session with another school. Attached an HP webcam (USB) and can't get video. Any suggestions?
-->Click HERE<-- Does item "B" (Turn video on/off) in the last topic on the page help?
You control the camera for Skype from within Skype, so Skype must be running to running to make video work.
Message was edited by: EZ Jim
Mac OSX 10.7.4 -
my iPad is frozen.. it won't shut off.. i can't do a forced restart by holding the sleep/wake and home button.... it doesn't respond to that either.. i can't connect it to iTunes because it needs passcode entered but again the iPad is frozen so i can't input the passcode… I also can't do recovery mode as the ipad won't shut down for me to do a recovery mode.... HELP
Erase iPad and setup iPad from scratch
1. Launch web browser on your computer
2. Sign in to www.icloud.com
3. Tap on Find My iPhone
4. Select the iPad to be erased
5. Tap Erase iPad
6. Message: All your content and settings will be erased. An erase iPad cannot be located or tracked
7. Tap Erase
8. Enter Apple ID and Password
9. Tap Next
10. Enter a phone number where you can be reached. It will be shown on your iPad after it has been erased
11. Enter phone number
12. Tap Next
13. Tap Erase iPad
14. This message will be shown on your iPad after it's been erase "This iPad has been lost. Please call 12345678"
15. Done
16. Erase started
16. OK
17. Remove from Account (this will allow iPad to be activated and used by another person)
Setup wiped iPad
1. Slide to unlock
2. Select English
3. Select Country
4. Choose Wi-Fi Network
5. Enter Wi-Fi password
6. Activate iPad
7. Apple ID and Password
8. Apple ID and Password
9. Enable Location Service
10. Select "Restore from iCloud Backup"
11. Enter iCloud password
12. Agree to Terms and Conditions
13. Choose backup
14. Select "Backup file in iCloud"
15. Hello (Welcome)
16. Slide to unlock
17. Update Completed
18. Continue
19. Enter Apple ID and Password
20. Updating iCloud
21. Select "Don't Add Passcode"
22. Welcome to iPad
23. Get Started
24. Restore Apps and Media. Your settings have been restored. Connect to power to save battery while apps and media are downloading
25. Sign in to iCloud -
I need to connect a Micro SD Card to my MacBook (10.6.8) 2011 so I can switch my Magellan RoadMate GPS for use with the new Mac Content Manager from Magellan. Can I do this? from
Hi Robert and welcome to Apple Discussions,
There are adapters available that convert micro cards into fullsize ones.
You will also need a USB card reader if you do not have one.
Good luck,
Alan -
HT1414 my IPhone stuck in a state of need to connect it to iTunes
my IPhone stuck in a state of need to connect it to iTunes. What do I do?
have you tried to connect it to itunes?
-
Okay, while I was updating my ipod an unknown error occured. Now It's telling me I need to connect it to itunes, even though it's plugged in already. And when It does connect it shows up as a generic "ipod". It doesn't even show my ipod anymore. And it wants me to restore it. It said something around the lines of "restore ipod so it can connect to itunes." Isn't that going to delete all my pictures and stuff? I don't think it saved the reboot from when it was updating!I just want all my settings and stuff back! I don't want to lose all my stuff especially my 2,000 pictures on there! Ugh! Help!
Errors when updating leads to corrupt system files and this may be your problem. If you're using windows, connect your device to PC and run any third party app like Syncios. If it detects, you maybe in luck and try to back-up your data if possible. I hope that it won't and if doesn't, there is no other way to recover files. You should be restoring with iTunes and all data will be erased, or else your device may become unusable.
-
Why is it my songs or none of my information appearing in my ipod? What can i do? its been a whole 2 days connected to my itunes and it still says waiting for items to copy
my iPad it get stuck on step 8 with a prompt that says "waiting to copy items" it stays on like that for hours
Reset your iPad.
Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.
I recently upgraded to to the iOS 5 on my iMac and iPad
You don't need to manually sync using iOS 5.
Help here > Apple - iCloud - Learn how to set up iCloud on all your devices.
Message was edited by: Carolyn
Maybe you are looking for
-
How do i move my photobooth photos from my old mac to my new mac with lion os
have tons of photos in my older version of photobooth, how do i migrate them to new mac with lion os. looked everywhere but can't find an answer.
-
Table Name or Function Module to find out all the Screens & Subscreens for
Hello Experts, Table Name or Function Module to find out all the Screens & Subscreens for all T-Codes Helpful Answer will b rewarded Arif Shaik
-
Payment Terms-Manual due date Input-Which field?
Dear Gurus, I can observe an option at the payment terms of "no default" which means that payment due date has to be entered manually.Is there some field in the order or billing document where the due date can be entered manually.Kindly hep,thank you
-
How to do that when you open a new tab to appear like the start page after opening the browser?
-
This crops up as the default application whenever I attempt to send Email via a website I'm looking at, and I have to copy the address and paste it into my regular Email server (Charter.net). Can I just delete the application from my hard drive?