My itunes crushes after signing in ,what should I do ??
When I try to sign in to my account with iTunes
it simply crashes and terminate
right after clicking continue in the welcome screen
WHAT DO I DO ??
Skip reinstalling Apple products.
I see the "Blocked Plug-in" message and have tried to install latest version of Flash Player.Have Mac OS X 10.7.4 with 2.5 GHz, 4GB.In system Preferences i see Flash icon. Plug-in version 11.2.202.235 is installed. Is there a newer version? I continue to see the pop-up message "current version is out of date..." when I click on" Blocked Plug -in"
see that Flash version 11.4 downloads but "install" button not highlighted, therefore new version not installed.
Message was edited by: 2654123
Similar Messages
-
When I click on free upgrade to Mavericks it says 'we could not complete your purchase, The product distribution file could not be verified. It may be damaged or was not signed.' What should I do? Thanks
Several causes for this problem have been reported. Please take each of the following steps that you haven't already tried. Stop when it's resolved.
Step 1
If possible, test on another network, such as a public hotspot (if the computer is portable) or the hotspot created by a mobile device. A network gateway that blocks some traffic, most likely on a company or university network, could be causing the error.
Step 2
Back up all data.
From the menu bar, select
▹ System Preferences... ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If any proxy options are selected, make a note of them and then deselect them. You don’t need to change the bypass or FTP settings. Click OK and then Apply. Test. The result may be that you can't connect to any web server. Restore the previous settings if that happens.
Step 3
Rebuild the Spotlight index. If you try to search now from the magnifying-glass icon in the top right corner of the display, there will be an indication that indexing is in progress.
Step 4
Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
I dropped my ipod touch 3 generation into some water. I let it dry off completely befor turning it back on. Now it shows me the itunes logo and the usb cord picture. I restored my ipod, and now it won't connect to itunes or my computer. What should I do?
Hey
Does it charge when connected, if not you may have broken it..
You can always try an apple Genius at an Apple Store,
Jason -
OK, here is my problem...i leave my ipod classic charging for 2 days and it still has the 'Please wait, very low battery" sign! what should i do? Please answer!
When you connect the iPod to the adapter or PC, you should see either of these signs on the iPod Screen .
If you just get
It may mean that your Adapter is not giving enough juice, because
the adapter or the cable is defective or
your bottom dock connector is dirty with lint or dirt.
Have a nice day! -
My creative cloud does not have after effect? what should i do ?
my creative cloud does not have after effect? what should i do ?
you can download, install and run 32 bit trials but you cannot license them.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
When i open itunes it just instantly closes, what should i do?
I click the itunes icon and itunes opens up then, instanly closes and says i tunes quit unexpectedly. what should i do?
Try this:
1. Quit iMovie
2. Restart the Mac
3. Repair permissions (open Disk Utility in your Applications/Utilities folder), select Macintosh HD and choose repair Permissions from the buttons displayed
4. Move iMovie preferences (or trash them). They're at <your usenrame>/Library/Preferences/com.apple.iMovieApp.pList (the name might vary slightly, depending, but will always start com.apple.iMovie...)
5. Delete the iMovie cache (in <your username>/Library/Caches, called com.apple.iMovieApp or similar. Delete the whole folder
6. Restart the Mac.
Hopefully, that will fix it -
IPhone keeps saying connect to iTunes but won't restore what should I do?
I bought a 5C and it was working fine, but needed an update and had the person I bought the phone off had their iCloud still on. I asked them for the password but as he didn't know me he said he didn't trust me so I looked online and it said to force it to restore I should put it in DFU mode then plug it in to iTunes and it will restore. Now it just displays a iTunes logo (in red) and a lightning cable and arrow. Basically telling me to plug the phone into iTunes but i do and it won't restore, i try to restore it and it says error 1, 3,18 or 2006. SOMEONE PLEASE HELP! What should I do?
Hello jxshurobinson,
I'm sorry to hear you are having issues with your iPhone. If you are having issues restoring your iPhone and are just seeing the Connect to iTunes screen, you may find the following articles helpful:
Resolve iOS update and restore errors in iTunes - Apple Support
Resolve iOS update and restore errors - Apple Support
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Also, from your description, it sounds like the phone may have still been Activation Locked to the previous owner's account. If that is the case, you may also find this article useful:
Find My iPhone Activation Lock: Removing a device from a previous owner’s account - Apple Support
Sincerely,
- Brenden -
Itunes stops working on startup what should i do?
I have already downloaded the newest version of itunes to repair the old one, but it still stops working on startup, then gives me the same option to re-download itunes once more, what should I do?
I would suggest restoring the phone in iTunes. If that doesn't work, restore the phone again, but don't restore from your backup - that is probably putting the problem back on the phone again. You will need to resync your content and redo all your settings, but hopefully that will resolve your problem.
Good luck! -
Hi i wanna restore my ipad 2 thru itunes but popup error 3194 what should i do now?
hi i wanna restore my ipad 2 thru itunes but popup error 3194 what should
Have you tried the troubleshooting for error 3194 on that page, including the 'This device is not eligible for the requested build' section towards the top of the page ?
-
Hi All,
I have a 2012 MBP, which used to run smooth as silk, but it has dropped down to a snail pace after upgrading to Yosemite. I'd appreciate recommendations on how to re-store, kill malware, etc based on my machines diagnostics reported below:
Problem description:
Slow macbook Pro (2012) after Yosemite upgrade
EtreCheck version: 2.1.8 (121)
Report generated March 29, 2015 at 7:16:22 AM GMT+11
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (13-inch, Late 2011) (Technical Specifications)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 584
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Time since boot: 18 days 0:18:6
Disk Information: ℹ️
ST9500325ASG disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 498.88 GB (63.09 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.devguru.driver.SamsungComposite (1.2.48 - SDK 10.6) [Click for support]
[not loaded] com.nike.sportwatch (1.0.0) [Click for support]
[not loaded] com.wdc.driver.1394HP (1.0.6) [Click for support]
[not loaded] com.wdc.driver.USBHP (1.0.4) [Click for support]
[not loaded] net.Thomson.iokit.USBLAN_usbpart (1.6.0) [Click for support]
/System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
[not loaded] com.devguru.driver.SamsungACMControl (1.2.48 - SDK 10.6) [Click for support]
[not loaded] com.devguru.driver.SamsungACMData (1.2.48 - SDK 10.6) [Click for support]
[not loaded] com.devguru.driver.SamsungMTP (1.2.48 - SDK 10.5) [Click for support]
[not loaded] com.devguru.driver.SamsungSerial (1.2.48 - SDK 10.6) [Click for support]
Problem System Launch Agents: ℹ️
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.CallHistorySyncHelper.plist
[killed] com.apple.coreservices.appleid.authentication.plist
[killed] com.apple.icloud.fmfd.plist
[killed] com.apple.rcd.plist
[killed] com.apple.scopedbookmarkagent.xpc.plist
6 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.AirPlayXPCHelper.plist
[killed] com.apple.awdd.plist
[killed] com.apple.ctkd.plist
[killed] com.apple.icloud.findmydeviced.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.periodic-monthly.plist
[killed] com.apple.tccd.system.plist
[killed] com.apple.wdhelper.plist
8 processes killed due to memory pressure
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.bombich.ccc.plist [Click for support]
[loaded] com.google.keystone.daemon.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
BitTorrent Application (/Volumes/BitTorrent/BitTorrent.app)
Nike+ Connect Helper Application Hidden (/Applications/Nike+ Connect.app/Contents/Resources/Nike+ Connect Helper.app)
EvernoteHelper UNKNOWN (missing value)
KiesViaWiFiAgent Application Hidden (/Applications/Kies.app/Contents/MacOS/KiesViaWiFiAgent.app)
fuspredownloader Application Hidden (/Users/[redacted]/Library/Application Support/.FUS/fuspredownloader.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 11.1.102.55 [Click for support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 11.1.102.55 Outdated! Update
Default Browser: Version: 600 - SDK 10.10
o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
CitrixICAClientPlugIn: Version: 11.4.0 - SDK 10.0 [Click for support]
SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 [Click for support]
googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
Silverlight: Version: 5.1.20513.0 - SDK 10.6 [Click for support]
Safari Extensions: ℹ️
Searchme [Adware! - Remove]
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
28% Google Chrome
17% WindowServer
13% sandboxd
3% sysmond
2% Dock
Top Processes by Memory: ℹ️
168 MB Google Chrome
99 MB Finder
92 MB Google Chrome Helper
64 MB mds_stores
64 MB WindowServer
Virtual Memory Information: ℹ️
77 MB Free RAM
1.27 GB Active RAM
1.22 GB Inactive RAM
1.13 GB Wired RAM
72.14 GB Page-ins
1.29 GB Page-outsWhen you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
ITunes will not open. What should I do?
iTunes will not open. I've tried restarting my computer, and that's about it.
I don't see any support documents regarding this, and am somewhat at a loss for what to do. I've never seen this happen before.
I'd appreciate any help. Thank you!Hi,
This is a problem affecting many people after updating to Yosemite 10.10.3. If this is the case with you, try the following steps.
Go to your Applications folder, select iTunes, go to Finder > File > Get info and in the window that appears, go to Sharing & Permissions, unlock the padlock with your password, and change all permissions to Read & Write. You can now drag the iTunes app to the trash. Go to iTunes tab at the top of this page and download and install iTunes.
See this thread. Yosemite slow opening and cannot open itunes -
i just wanted to restore from 6.1 to 6.1.1 on my iphone 4s and itunes gave me an error -1 and know it doesnt work i dont know if the warranty from 1 year of apple can fix it or what i can do to solve the problem... as i said i just wanted to update and know im stuck with the restore logo ( the itunes logo and the cable) need some help please!!!!
no so i dont know what happened
-
i set up my moms new desktop mac a couple of weeks ago and i did the same thing i tried to do on my macbook but its not working, yet it worked on my moms mac. so i dont know what to do. i moved the file from the hard drive to the itunes folder. then went to itunes, file add to library and clicked on the folder but nothing happened. so i went back and moved the music folder to the automatically download to itunes folder and it didnt work. i even tried drap and dropping the folder directly into the itunes library. it went blue so i knew you could drop it in, but nothing happened. i dont understand how it worked on my moms mac but not mine.
FIle>Add To Library. Select all the music on your external hard (Select all the artist folders) drive and hit OK. This will add all the music to your new Mac's iTunes library file.
Good luck and good choice on moving to the Mac -
How do you sign up for iTunes for free? I signed in originally for free but it now asks for my ID and password with everything I access. I've tried signing out and re-doing it but there is no option for 'nil' in the credit card details any more. How do I get the nil option back?
Your previous support postings are listed [https://support.mozilla.com/en-US/search?q=&num_voted=0&num_votes=&asked_by=larsonite&answered_by=&q_tags=&created=0&created_date=&updated=0&updated_date=&sortby=0&a=1&w=2 here].
'''Please bookmark that page so that you don't have to ask about this repeatedly.''' -
Iphoto still grayed out after iphoto upgrade after mavericks install, what should I do?
After upgrading to mavericks Iphoto was Grayed out. The computer Notified me that I would have to upgrade iphoto from 9.2.1 to to latest version.
went to the mac app store, the upgrade page showed the iphoto upgrade, it downloaded and installed the upgrade but iphoto is still grayed out in the dock and in the applications folder. The mac app store shows the iphoto upgrade as being installed. whot should I do?First, make sure the new copy of iPhoto was not installed as a separate icon in your Applications folder.
If that's not the case, try launching it anyway; I've seen instances where the icon fails to update until the associated application is launched for the first time.
Maybe you are looking for
-
my itunes wont open it tells me that my itunes library was updated by a newer version on itunes but my software is uptodate any one else have this prob?
-
Downloading Flash Professional CS6: Gets to 99% and crashes.
Hi, I'm having some very serious problems downloading Flash CS6 onto my computer. I have a 2009 Macbook Pro and just recently had all the parts replaced (new 512GB hard drive, 4GB 1067 Mhz DDR3, 2.53 GHz Intel Core Duo Processor) and just installed M
-
SOA composite deployment logging
When a archive file is deployed the user logged into the EM Fusion Middleware Control is logged. For example: [2013-09-10T17:01:00.377-04:00] [soa_server1] [NOTIFICATION] [SOA-21530] [oracle.integration.platform.blocks.deploy.servlet] [tid: [ACTIVE]
-
Why should u not leave the case on the ipod while it is charging?
Why should u not leave the case on the ipod while it is charging?
-
Burning HDV to Blu-Ray. HDV iMovie 6.
Hello I would be interested to hear from someone with experience in burning HDV to Blu-Ray, and some guidance as to what model would be appropriate, although such model may not be available in Australia. I investigated a LaCie burner, but the specifi