My magic eye has stopped working when aerial is conected

My magic eye (ME) to TV upstairs worked perfectly for over a year. My digital aerial feeds into sky box then cable (aerial) feeds from sky box to upstairs ME where I can either watch sky or digital TV. After sky reception with ME failed I tried connections and discovered I have perfect sky again if the digital aerial is unplugged. I thought the aerial outlet was a bit loose so I replaced it, but no better - any suggestions?

Thank you - Just tried what you said and changed the RF output to the bottom end of the scale (It was at the higher end) and it has worked - Could have saved myself £1.94 and a trip to B&Q for a new areial conector!  But very pleased it is up and running again - ThanksAvoriazSkier wrote:
Sounds like one of the terrestrial channels is clashing with the RF output from your Sky box. Go into the installer menu (Services 0 0 1 Select or Services 4 0 1 Select, depending on the age of your box) and change the RF output to something well away from the channels used by your local transmitter. If you can tell me your local TX I can suggest suitable channels.AvoriazSkier wrote:
Sounds like one of the terrestrial channels is clashing with the RF output from your Sky box. Go into the installer menu (Services 0 0 1 Select or Services 4 0 1 Select, depending on the age of your box) and change the RF output to something well away from the channels used by your local transmitter. If you can tell me your local TX I can suggest suitable channels.

Similar Messages

  • I get a message that itunes has stopped working when I try to sync photos

    I get a message that itunes has stopped working when I try to sync photos. Error message says "APPCRASH ..."
    Can anyone help? Thanks.

    I found the file but when I added it to the  list for the Data  Execution Program to ignore , I received a message that the Program.x86/itunes file must have the DEP on in order to run. Anyone else having this problem ?

  • Error "Licensing for this product has stopped working" when you launch Acrobat 9

    Hi,
    I'm part of service desk and my company has several thousand users of Acrobat. There has been strange issues reported since upgrading from 7.0.5 to 9.1 and a lot of them are uhappy. The latest issue is users started to receive the following error,
    Error "Licensing for this product has stopped working" when you launch Acrobat 9 or Adobe Creative Suite 4 products. The link http://kb2.adobe.com/cps/405/kb405970.html#ErrorCodes has solution, but i tried everything given for 147-178, and nothing works. The users are highly frustrated. Any other possibilities? one collegue claims running simple reg cleaner could solve this issue.

    Wow,
    I went through a "font crisis" on my MacBook about two weeks ago, and I reinstalled Snow Leopard, then restored everything from Time Machine backup. Everything but Office 2008 and CS4 was able to run from the restore, because there were preferences for both that wouldn't copy back to my Library (permissions).
    I reinstalled both from the "original media" (dmg's)  with my Time Machine and 2 other external HDs connected and mounted. I had no problems with either. In fact since I was re-installing from dmg's stored on my Time Machine drive, I had to have it connected to do this. Installing Office and CS4 from the dmg's took all of twenty minutes for both with no errors at all.
    I'm glad you got everything taken care of, but anectdotal evidence tells me CS4 can be reinstalled with external drives connected and mounted.

  • I get an error message "Adobe Reader has stopped working" when i try to use Firefox

    I get an error message "Adobe Reader has stopped working" when i try to use Firefox

    I have also retarted twice...

  • Excel has stopped working when I try to launch Excel 2013 Powerpivot

    Redirected from the Win 7 forum: (http://answers.microsoft.com/en-us/office/forum/office_2013_release-excel/excel-has-stopped-working-when-i-try-to-launch/01460690-abab-495f-ab5f-904f72f88668)
    My system is a Windows 7 machine, 64 bit
    I previously had Excel 2010 32bit with 32 both Powerpivot installed.  However I am currently evaluating 64 bit Excel 2013 with Powerpivot for my company so I uninstalled Excel 2010 and installed an evaluation copy of Excel 2013 64 bit.
    However whenever I launch Excel, enable Powerpivot, then click any of the Powerpivot buttons it gives me an error saying "Excel has stopped working".
    I took a look in the Windows events logs and found:
    Faulting application name: EXCEL.EXE, version: 15.0.4420.1017, time stamp: 0x506741b5
    Faulting module name: mscorwks.dll, version: 2.0.50727.5477, time stamp: 0x5265c8ee
    Exception code: 0xc0000005
    Fault offset: 0x00000000002ba203
    Faulting process id: 0x3e8c
    Faulting application start time: 0x01cf52a7644eda9d
    Faulting application path: C:\Program Files\Microsoft Office\Office15\EXCEL.EXE
    Faulting module path: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\mscorwks.dll
    Report Id: afa4f824-be9a-11e3-94ac-415645000030
    I have tried uninstalling and re-installing as well as doing a Repair on my .net framework, which is the latest version.

    You can go to check the dll file, what's size of this dll file?
    If the file size is 0 byte, you can check the link below:
    http://forums.steampowered.com/forums/showthread.php?t=2735528
    Also you can go to check the disabled items (File->Options->Add-ins->Disabled items->Go) to see if any dll file was disabled.
    In addition, Isn't the latest version of .NET Framework supposed to be 4.0?(Not quite familiar with this)
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee
    the accuracy of this information.
    Wind Zhang
    TechNet Community Support

  • Error message - Captivate has stopped working - when publishing to MP4

    I get and error message that Captivate has stopped working when I try to publish to an MP4. I am using Captivate 6. How do I solve this problem?

    Hi Shivers,
    What is the Exact version of Captivate you are using (Go to Help > About Adobe Captivate) ?
    Please try to clear the cache of Captivate ( Go to Edit > Prefrences > General Settings)
    See Screenshot
    Please clear cache from computer as well..
       Go to Start>Run>Type %temp% and then click on ok
    Delete all the files from that folder(Some of the files which are in used will not get deleted , Ignore them)
    Then try to Run as Admin and check if this works
    Thanks and Regards
    Himanshu Satija

  • ITunes has stopped working when I click "Get Info"

    Anyone can help me please..?
    My iTunes has *stopped working* when I right click on any song click "*Get Info*". It just stop and crash. I'm on Vista 32bit. Thanks before...

    Well it's working fine again.........................................I don't get it - -

  • Skype has stopped working when i make a call or vi...

    i need help my skype has stopped working when i make a call or video call.. i tried all solution my webcam works fine my mic too help me fast i use skype to study and work and thx :'( email me on [Mod edit: Please do not include personal/private information when making a public post. Thanks!]
    Attachments:
    Untitled.png ‏1174 KB

    Please,  run the DirectX diagnostics tool.
    Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
    Be aware that you will have to zip this file before attaching it here.

  • Jrew.exe has stopped working when iam trying to install oracle on vista

    hi,
    iam gettin an error stating that jrew.exe has stopped working when iam trying to install oracle 9i on windows vista cam anyone help me in resolving it

    Duplicate post. Please stick to Re: jrew.exe has stopped working when iam tryin to install oracle9i on vista

  • Jrew.exe has stopped working when iam tryin to install oracle9i on vista

    jrew.exe has stopped working when iam tryin to install oracle9i on windows vista can anyone help me to resolve this issue

    869902 wrote:
    jrew.exe has stopped working when iam tryin to install oracle9i on windows 7 , 64 bit versionYou are reviving a 3-year old thread . . .
    And if the OP couldn't install 9i on vista because it (9i) was too old to be certified on Vista, what do you suppose of 9i on Win7?

  • Message: itunes has stopped working when I connect ipod touch-windows 7

    message: "itunes has stopped working"    when I connect ipod touch-using  windows 7

    Make sure to check your internet settings or the settings on your wi-fi server (if accessible). You may also want to make sure that your not in a place where wi-fi is obtructed.(concrete walls other machines, etc.)

  • "iTunes Has Stopped Working" when syncing iPod Touch

    So in the last few days, I've been getting an error message when I try to sync my iPod Touch 2g with software version 3.1.2. After a few seconds, I get this error message "iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." It only happens when I plug in my iPod for syncing.
    I've been up and down the message boards here looking for a solution and I can't seem to find anything that works. I've uninstalled/reinstalled quicktime, then the iTunes software, I've deleted and remade my iTunes library file... I'm just at a loss. Here's the error information windows gathered up...
    Source
    iTunes
    Summary
    Stopped working
    Date
    1/10/2010 1:45 AM
    Status
    Report sent
    Description
    Faulting Application Path: C:\Program Files (x86)\iTunes\iTunes.exe
    Problem signature
    Problem Event Name: BEX
    Application Name: iTunes.exe
    Application Version: 9.0.2.25
    Application Timestamp: 4afca401
    Fault Module Name: StackHash_0a9e
    Fault Module Version: 0.0.0.0
    Fault Module Timestamp: 00000000
    Exception Offset: 00000000
    Exception Code: c0000005
    Exception Data: 00000008
    OS Version: 6.1.7600.2.0.0.768.3
    Locale ID: 1033
    Additional Information 1: 0a9e
    Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional Information 3: 0a9e
    Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
    Extra information about the problem
    Bucket ID: 830098715
    Anyone know how to help???

    Hi Zainabe_nachaby,
    If you are having issues with iTunes unexpectedly quitting when syncing, you may find the following article helpful:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Regards,
    - Brenden

  • ITunes has stopped working when connecting new iPhone 6

    I am getting what seems to be a common error "iTunes has stopped working" which I have tried many different tricks for fixing that I have found online, but nothing seems to work.
    I have been using an iPhone 5 and backing up and syncing with no problems, the only problem being when I try to access the iTunes Store. This didn't bother me too much as I can access the store on my phone and everything else on iTunes worked fine.
    But today I bought an iPhone 6 and as soon as I connect it (whether iTunes is already open or opens when I plug the iPhone in) I get the above error message and iTunes closes. So I am unable to sync my back up on to the new phone or use it at all.
    Can anyone help with a recent fix for this, or a way around it?
    I have tried copying recommended files into the correct folder, re-installing, opening as administrator and many other things I have come across online, but majority of these seem to be from a year or more ago. I am using Windows 7 on a PC, with the latest iTunes that I have just re-installed (again).
    Any help would be really appreciated!

    Same here....also when I restart iTunes afterward, all my devices don't even show up in iTunes at all until after you restart the computer
    Even then, the problem persists. And I've tried all kinds of troubleshooting techniques

  • Itunes has stopped working when trying to open store

    I have gone through the uninstall/reinstall many times. Redid host file. Flush dns. Have tried many things. I noticed on one conversation on here. To go to the Action Center and click on itunes. It is saying a fault in the webkit.dll. I have no clue what that means or what I need to do to fix the problem.
    I did notice that when I uninstalled the last time that when I reinstalled I no longer had Quicktime. So installed that, but still no luck
    I have Norton 360 and Windows 7 64 on my laptop. We also have a desktop with the same, but the desktop is able to open the store. I am a tad confused on why mine is not. I can open itunes see the library then when I hit the itunes store it sits for awhile then it comes up with itunes has stopped working. Please if someone could help.

    It shows in my downloads, starts downloading, and when it gets to the end of a song, I get the message "iTunes has stopped working" and choices to close or debug, etc.
    Head into your Problem Reports and Solutions control panel (or the Windows 7 equivalent) and open your Problem History. Look for iTunes Problems reports that seemed to occur at the time that you had the Store troubles.
    Open the reports and have a look through them. Do they all seem to say the same thing? If so, paste the contents of a typical report into a reply here. (Fingers crossed, that may give us a heads up on the cause of the errors.)

  • "remote desktop connection has stopped working" When printing from remote desktop connection

    I have been having a issue when using a windows 7 machine. I have Remote Desktop to a session on Windows2008 R2, I am using the local printer resources to redirect the printing. However everytime i try to print it crashes the remote desktop application.
    Gives me "remote desktop connection has stopped working." I have 4 other computers connected and printing with no issues what so ever. This only happens when i print. It does print by the way just the application crashes.
    -I have also updated the printer drivers to newest possible thru the manufactorer website. The printer is a Brother MFC-8890DW. Windows 2008 R2 is up to date for the RDS server. 3 other machines are able to Remote in and print. The user is able to print using
    diffrent machines just not the Windows 7 machine.

    Hi,
    Happy to hear that you resolved your issue. For another issue which you are facing here trying to provide some suggestion.
    As you have commented that you are facing issue with second screen resolution on wide screen. The setting which I am suggesting can only applies when you are using multi-monitor Remote Desktop connections.  If you are making Connections using a single
    monitor do not use this setting. 
    So for this you can try to apply “Limit maximum display resolution” setting in group policy, where you can mention the width & height for the screen to display. The setting can be applied on below mentioned
    path.
    Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Remote Session Environment
    Meanwhile sharing article with you for more information.
    Remote Session Environment
    http://technet.microsoft.com/en-us/library/ee791847(v=ws.10).aspx
    Hope it helps!
    Thanks.

Maybe you are looking for