My old pc with my music does not come up with device when I connect y new iPad using USB

My old pc with my iTunes music library does not see a device when I connect new iPad using usb

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
ITunes: Syncing media content to your iOS devices
http://support.apple.com/kb/ht1351
 Cheers, Tom

Similar Messages

  • I just got got a new phone and want to put my music and pictures on it from my computer.  My music is in in itunes and when I sync my phone the music does not come over. What's going on?

    I just got got a new phone and want to put my music and pictures on it from my computer.  My music is in in itunes and when I sync my phone the music does not come over. What's going on?  I'm using itunes ver.11.0.5.5

    Hi, gcmar.
    I would double check to make sure that you have selected the options for syncing.  Look over the article below to make sure you have the items that you want selected to sync over.
    iTunes 11 for Windows: Syncing overview
    http://support.apple.com/kb/PH12311
    Thanks for using Apple Support Communities.
    Regards,
    Jason H.

  • TS1538 ipad does not come on once its unpluged from power source,it enters recovery mode when both power and home botton are pressed with usb on powersource but does not come up at all when connected to computer or out of power source

    ipad does not come on once its unpluged from power source,it enters recovery mode when both power and home botton are pressed with usb on powersource but does not come up at all when connected to computer or out of power source

    What model iPad do you have? If it's an iPad 1, the battery may have expired and needs replacement.
     Cheers, Tom

  • When i sync my ipod touch (4gen), my music does not appear on my device? what is wrong?

    when I sync my ipod touch (4gen), my music does not appear on my device. What went wrong?

    Hello,
    The problem is that you just don't selected the music that you want to import.
    You can do this by opening iTunes, search your ipod in the superior bar, select it, then will appear a screen showing the information of your ipod, you can check how many songs are in your ipod, if there says nothing so theres the problem. In the superior bar, select Music, then click on the box "Sync Music", now select the songs you want right down. And press "Sync" That should solve the problem.
    Cheers

  • HT5312 What if it does not come up with the option to reset and you do have a rescue email address?

    On my account, when i select manage acount and go to password and security it does not come up with the option reset security questions and answers. Therefore i have been searching whole websites for days and contacting itunes yet i have not been told a solution yet. How do i reset it?

    You are sure that you have a rescue email address on your account and not just an alternate email address ? If it is a rescue address then you should be able to go tohttps://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
    If it's not a rescue email address then see if the instructions on this user tip helps :https://discussions.apple.com/docs/DOC-4551

  • HT1414 i-phone does not come up in devices

    i-phone does not come up in devices in i-tunes,trying to back up as getting new i-phone tomorrow

    http://support.apple.com/kb/TS1538

  • HT1386 my iphone does not pop up under devices when I plug it into my new macbook pro. Any ideas?

    my iphone does not pop up under devices when I plug it into my new macbook pro. Any ideas?

    iOS: Device not recognized in iTunes for Mac OS X

  • HT1923 itunes does not recognize my iPhone 5 when I connect to iTunes

    iTunes does not recognize my iPhone 5 when I connect to iTunes

    Hello mprwinded,
    It sounds like your iPhone is not appearing in iTunes.  I recommend following the steps in this article to troubleshoot the issue you described:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • My iphone4 does not come up with the airplay mirror option

    my iphone 4 when I go to airplay the buttton is there but the option to mirror screen does not come up. any ideas

    You need an iPhone 4S in order to mirror.

  • Bridge CC does not come to the front, when opening file from explorer

    Hi everybody! Please let me now if there is way to solve the following problem:
    When Adobe Bridge CC is opened in the back and I surf through files in Windows Explorer, after I double-click the file I want to view, Bridge does not come to the front, like normal image viewers do, it opens the file normally, but unfortunately for me it stays in the back. And I want it to show up every time I open an Image!
    Thank you in advance!
    Win7, 64bit, Adobe CC

    Any App in Windows opened in the background has the ability to show up every time it is called... Except Bridge for some reason...
    If I double-click MP3 file - Windows Media Player shows up, even if it running in the back
    If I double-click a text file - Notepad shows up, even if it running in the back
    But if I double-click an image file - Bridge just stays in the back

  • Kindle does not show up as device when plugged in USB

    I was trying to transfer some files to my Kindle using the USB port. I have a Kindle 2, and a Rocketfish Micro USB cord. The Kindle does charge up so it is drawing power through the cord. But the Kindle does not show up as a device attached to my MacBook. My external HD (Firewire) and iPods (USB) all work perfectly through this USB hub.
    I did call Apple (using my 30 day warranty for installing Snow Leopard) and the tech support person did not even know what a Kindle was.
    Amazon says it's an Apple problem.
    Apple doesn't seem to have any clue.
    I've seen from various threads that USB devices do seem to have intermittent problems. Is the Kindle one such device?

    Some devices do not work properly through a hub. Plug the kindle directly into your Mac and see if it works. Just because some devices work through a hub, doesn't mean all devices work through a hub. Apple does not support third party devices or third party hubs.

  • HT1386 my ipad is not syncing my music correctly from my itunes account via my laptop. The music does not appear, although it shows when you look into summary as grayed out .

    I carried out a recent software update and there after that my itunes music would not sync in the normal way. My music only shows on my ipad when connected and in music summary and this is shown as grayed out with a broken circle icon beside any new music which has been inported to my itunes account via my laptop. In the past when i connected my ipad to my laptop to sync it would ask if i wanted to transfer from ipad or not. This does not happen now at it goes straight into sync mode.

    Hi,
    This sounds so frustrating. If any processing of sound, e.g. through Logic, through Wiretap, or you might try Garageband (which I assume you have tucked away somewhere), produces the problem, then its hard to blame the software of the individual program. This leaves OSX and/or Coreaudio, or a hardware problem. Sorry if you've already reached this stage. This would mean a reinstall of OSX (or an upgrade, if you're thinking of it), or addressing the hardware issue. I know I had some very bizarre things (and repetitive) happen to me with faulty memory, or memory that just wasn't seated properly in its slot. You could start out by running the hardware test and go from there.
    Good Luck,
    Ray

  • Icloud log in with Apple id  does not work from my mac when i try to run on photo stream

    When I try to active photostream or sharing via icloud it does not work I get an errormessage that there is communication problems with icloud. I cant get around to administrate the stream from the Icloud site or via my imac directly. It has never worked!

    yes, the apple id works for everyting else, but not for icloud. on my phone and ipad it is set up with the correct apple id and password. however, when i try to log on to icloud under system by clicking the icon the erromessag that i get is unknown apple id or password.

  • My MacBook Pro does not recognize my iPhone 4 when I connect with USB

    As the subject line says, when I connect my iPhone 4 to my MacBook Pro via the USB cable, it normaaaally opens iTunes and iPhoto automatically and syncs and imports photos from the phone. But, for some reason, that doesn't happen anymore... Now when I plug in my iPhone with the USB...nothing happens.
    The USB still works as a power charger. I even tried a different newer iPhone USB cable from my friend's phone...same problem. I tried both USB ports.
    I update my iPhone, my Mac, my itunes, my iphoto...everything. I reset everything at least a couple times. Still no luck!
    I did a Disk Utility verify check...it found no problems, the volume 'appears to be ok.'
    The iPhone still syncs with iTunes over WiFi, but unfortunately I can't back up my photos from my iPhone wirelessly (I don't have iCloud set up). I want to do it via USB.
    Anyone out there with any advice on how to get my computer to recognize my iPhone?
    THANK YOU!!!

    Ive been struggling with this problem all day, I was trying to upload my pics and videos from my iPhone 4s (version IOS-7) and my computer didn't seem to recognize my phone. Well I finally gave up.  My iphone was plugged into my computer via USB, and my iPhoto would not open up automatically like it always had before I updated to IOS-7.
    As a last ditch effort I happened to open up my software updates in the apple icon. Lo and behold, once I agreed to update my iTunes app on my mac OSX 10.6.8, it opened my iTunes and a window popped open asking me to click on 'trust this computer'. I did that, and suddenly my iPhoto opened up and filled up with all of my iphone 4s (version IOS 7.1.1) pictures and videos!  I could not find an answer anywhere online. I guess the trick is to manually open up iTunes before you attempt to upload pictures/videos from your iPhone into iPhoto.

  • TS1363 my ipad will not sync with iTunes - iTunes does not recognise it is there. If I plug my ipad into another pc it recognises it.

    I have an iPad which is no longer recognised by iTunes when I plug it into my pc. The device does not show up in iTunes and will not sync.
    My pc recognises my iPhone and syncs ok. If i plug my iPad into another computer iTunes recognises the iPad.

    Hello GenevaNB,
    The following article may also be helpful in getting your iPad to appear in iTunes.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Best regards,
    Allen

Maybe you are looking for

  • Custom ErrorDocument doesn't display correctly

    I have created a custom ErrorDocument 401 to use in .htaccess. After the user cancels out of the login screen in Firefox or Opera, they are redirected to the authreqd.html file for the custom error message. However, when that page is diplayed in Fire

  • Set expression's variable in the same step

    I probably asking a rhetorical question, but does it exist a way to set an expression's variable (say for load sequence dynamically) in the same step (sequence call)? I have a situation where I need to read a sequence path from the database and then

  • Can I use any acquistion card with Labview?

    I have got a non NI acquistion card, how can I use LabVIEW to program it?

  • Help on program

    SQL> create or replace package bulk_transfer is 2 type product is table of emp % rowtype index by binary_integer; 3 procedure bulk_proc(p_product in out product, p_product2 varchar2); 4 end; 5 / Package created. SQL> create or replace package body bu

  • Post-Crash Login Dilemma

    Hi there - Here are my machine specs: MacBook Pro 17" 2.6 2GB RAM running 10.4.11 Here's my dilemma: I crashed working in Logic Pro 8 but was able to do a clean shutdown. Upon restarting my machine, this is what I encountered: Machine boots to login