My server keeps telling me that I have an update for 10.10.1 and that I should look for it in the app store. I do that and am not finding anything that makes the update notification go away. I have installed an update the app store says I need.
I updated to Yosemite on my Mac mini/server. Then my server wouldn't work. I updated and bought the software needed when updating to Yosemite. The server seems to be working. Subsequently I've started getting a notification on the server icon that an update is needed. When i look for details I'm instructed to go to the app store. I've done that. In the updates category no update is found by the app store system. I then went to the purchases category and was informed I needed to install the server software I'd purchased. While I'd installed before, I did it again. I still have the 1 in a red circle covering part of the server icon. I have restarted the mac mini. I can't figure out what step I'm missing. The continued presence of the red circle suggests that the software still isn't installed. Looked into restarting the server in help but don't find clear instructions that make sense. Suggestions from someone who has a mac mini server and has worked with this topic would be greatly appreciated. General comments from anyone who has not looked at this kind of problem before might turn out to be unenlightening for this neophyte.
I tried turning the computer off and then back on. The alerts don't show the notice to update as resolved. Hopefully this is not a problem or an indicator or another problem. Should I ignore or reload 10.10.1 from the app store to trigger a resolved check in a green circle?
Interesting that I had to buy server software after my free Yosemite download. I would have hoped that the two pieces of software would have gone together without any complication. It is not positive to end up buying a problem. Ah well, time to move on.
Similar Messages
-
I am sending my macbook pro in for service. The warranty co says i need to send a recovery disk to have my operating sys reinstalled if needed. Are there recovery disks for my system?
pammyjoh wrote:
I am sending my macbook pro in for service. The warranty co says i need to send a recovery disk to have my operating sys reinstalled if needed. Are there recovery disks for my system?
"Are there recovery disks for my system?"
Don't know. You have not told us what system you have. -
The app store keeps telling me that I have an update. This update is for 10.8.4. I have already installed this update. Thoughts?
Read this whole message before doing anything.
Back up all data. Quit the App Store application if it’s running. Test after each of the following steps until the problem is resolved.
Step 1
Triple-click the line below on this page to select it:
/Library/Updates
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with a folder selected. Move the contents of the selected folder to the Trash. You may be prompted for your administrator password.
Step 2
Do as in Step 1 with this line:
/Library/Preferences/com.apple.SoftwareUpdate.plist
If there's no change, quit the App Store and restore the file you moved from your backup, overwriting the one that may have been created in its place. Otherwise, recreate your settings in the Software Update preference pane.
Step 3
Hold down the option key and select
Go ▹ Library
from the Finder menu bar. Move the following items from the Library folder to the Trash (some may not exist):
Caches/com.apple.SoftwareUpdate
Preferences/com.apple.SoftwareUpdate.plist
Preferences/ByHost/com.apple.SoftwareUpdate.*.plist
Saved Application State/com.apple.SoftwareUpdate.savedState
Here, "*" stand for a long string of letters, numbers, and dashes.
Step 4
If you still have problems, quit the App Store again.
Triple-click anywhere in the line below on this page to select it:
open $TMPDIR../C
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). A folder should open. Inside that folder, there may be a subfolder with the name "com.apple.SoftwareUpdate". If so, delete it. You can then quit Terminal. -
If I make a new itunes account on my(now my 12 year old brother's) first generation ipod touch, will any data be deleted? I keep telling him that i don't think anything will be deleted and he keeps saying that he'll have to download everything again. Please answer. I've asked identical questions but received no answers.
It shouldn't be. You can use multiple Apple ID's one one device. But keep in mind that purchases made under one ID are permanently tied to that ID. So if you need to update an app that was purchased with a certain Apple ID, it will needed to be updated with those Apple ID credentials.
B-rock -
I have tried a lot to find an app or some way in email to attach multiple of pdf files in one email. I could not find anything that sends multiple pdf file in one email and still keeping the file in simple pdf format for the recipient.
I am not aware of a way except for photos that allows you to select multiple files in an email. I even checked settings in the Adobe Reader app, and it does not show that ability.
-
I am unable to update the newest version of itunes because I need to update my Mac OS X to version 10.6 or later but my computer keeps telling me that I do not have any updates available. I am currently running version 10.5.8
You need to buy 10.6 on DVD.
(74703) -
I'm trying to update a Muse site and it keeps telling me that the site was created with a different version of Muse. I have updated Muse and still can't access the site to make changes.
Hi rgarden95,
Can you please confirm the exact version of Muse you are opening the file with?
To check the version of Muse, please click on help->About Adobe Muse CC.
Regards,
Akshay -
I have $25 on iTunes and trying to buy a subscription to popsci and it keeps telling me that it can not go thru I have updated all my info on iTunes . So what do I need to do ?
Note:
Some In-App Purchases and Subscriptions require a Credit Card.
If necessary... Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
Triying to update to itunes 10 it keeps telling me that i have invalid signature
trying to update to itunes 10 it keeps telling me that the signature is invalid
ok first u need to do uninstall the itunes properly and then restart the computer and go online on apple.com and install the newest version of itunes and enjoy
but restart the computer is compulsory -
HT1420 It keeps telling me that I have more than 5 computers authorized, but I do not?
It keeps telling me that I have 5 computers authorized, but I do not have 5 computers.
Once you've authorized a computer it is authorized forever untill you "unauthorize" it. So if you have had a computer and gotten rid of it, or authorized a friends computer to use for awhile, or anything else then you've authorized computers up to your limit.
See http://support.apple.com/kb/HT1420 -
I'm trying to update to IOS6 on my New Ipad through software update under settings, over Wi-Fi ....It keeps telling me that IOS is still up to date.....? Any advice?
Maybe you have a beta version of iOS6 in your Ipad. if is this, you have to put the ipad in recovery mode in itunes and then the update will start.
To put the ipad in recovery mode, you have to turn of the ipad. In your pc/mac Itunes has to be running, and plug the cord, but when you do that you have to press the home button until a message shows up in itunes!!
Regards!! -
I m trying to update iTunes 10.5.2 my mac book air but it keeps telling me that it is installed but when i plug my new iPad and iPhone it keeps saying it has only 10.3 iTunes and it needs at least 10.5 version can anyone help?
no that does seem to work it is as if it is not recognising it. it says installed on screen but when plug new ipad and iphone4s in it says new version required but i have ran a system update and it says everything is updated
-
I am trying to update my ipad 2 but it keeps telling me that it isn't eligible for the requested build how can i fix this problem
This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
Update to the latest version of iTunes.
Third-party security software or router security settings can also cause this issue. To resolve this, followTroubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
Copied from this website.
http://support.apple.com/kb/TS3694#error3194 -
I do not understand what more information you require. I have downloaded Firefox 4 four times, but Firefox keeps telling me that I am using an outdated Firefox!
Please do the following.<br><br>
#Go to [http://www.mozilla.com/en-US/firefox/fx/?ref=logo Download Firefox 4.0.1] and download the installation file to your desktop.<br><br>
#Then go to Add/Remove Programs, scroll down to "Mozilla Firefox" and remove it, choosing to keep your bookmarks, customizations etc., (''don't checkmark the box'').<br><br>
#Then reboot and delete the folder called "Mozilla Firefox" at this location: C:\Program Files\Mozilla Firefox<br><br>
#Finally run the installation file you downloaded to the desktop earlier.<br>
Your bookmarks, customizations etc., are maintained in a different location and will become available to you again once you complete the installation.<br><br>
After you complete the installation, please go to the [http://www.mozilla.com/en-US/plugincheck/ Plugins Check] page and update where necessary. -
We have tried several times to restore the iphone but it keeps telling us that this is corrupt and try again later.
Hi meekboy3,
Thanks for visiting Apple Support Communities.
You may want to try restoring again after placing your phone into recovery mode:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Best,
Jeremy
Maybe you are looking for
-
Configuration issue : Oracle Essbase Studio Server
Hi, What going wrong here? Please advice... C:\Hyperion\products\Essbase\EssbaseStudio\Server\server_prod.log 20:44:06 05/13/10 INFO Starting up 20:44:06 05/13/10 INFO Oracle Essbase Studio Server. Version 11.1.1.3.00, Build 090, June 25 2009 20:44:1
-
Itunes installation doesnt work because of Quicktime
I've had an ipod for a while, and then we switched to XP PRO for increased security. After sometime itunes stopped working. So my dad and i have used like every uninstaller and remover and some piece of quicktime is still somewhere on my computer. Wh
-
Can not set up print option to print multiple pages in interactive pdf document
I have created a multipage document --- acutally it is set up as two layers with one layer that is hidden and an interactive button can be pressed to view it. I want it to so both pages print, and I am unsure how to do this I am working in acrobat
-
There are some records where century is shown as '00', i use following query for this; select claim_no, rate_change_date from core_business.cb_pensioner where extract (year from rate_change_date)< 100 and status='A' order by 1;Is there is better way
-
Auto Quality Notification and Return Delivery Via Usage Decision
Hello Gurus Need help ! I am using the Quality inspection with Material Specification. Just an overview of my current system settings - Inspection Type 101 for Purchased parts , My Inspection characteristics and Batch Charracteristics are linked .Bat