N8 and Microsoft Lync 2010

So where's the Lync client guys? Yes the recent Anna Belle update put in Communicator 2007 client but that's now old tech and MS is pushing Lync, their website links to the Nokia site where Nokia say the Lync client is available but it's nowhere to be found.
Android, Apple and Windows Phones have the client but Nokia is AGAIN left behind!
Oh and while I'm at it a pptp VPN client too would be nice, EVERYONE else provides this but Nokia seem unable to grrrrrrrr
Solved!
Go to Solution.

Microsoft Apps, including Lync, were rolled out via Software update soon after Belle release for all S^3 (Now Belle) devices, EXCEPT for N8, E6 and 500, which they will
receive later.
Here is the full article.
Microsoft Apps for Nokia Belle
N8-00,Galaxy Tab 10.1

Similar Messages

CallManager 7.0 Microsoft Lync 2010 Integration

We are currently running CUCM 7.0.2 and Microsoft Lync 2010 and want to be able to have Lync clients make calls from Lync. There are lots of documents that talk about the integration and this makes things very confusing (as to what to do). What are our options here? Which option is the best? Which options is the easiest?

Hi,
First of all you'll need to upgrade CUCM to 7.1.5 or later according to:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucimoc/8_5/english/release/cucimocReleaseNote.html#wp342335
CUCM 7.0 might work, but it was not tested. The integration needs to be done using a SIP trunk between the servers. You can refer to the guide below:
http://www.cisco.com/c/dam/en/us/solutions/collateral/enterprise/interoperability-portal/1048876.pdf
I also found this guide on the MS site:
http://www.microsoft.com/en-us/download/confirmation.aspx?id=26800
Hope this helps!
Regards,
Tere.

How to Install microsoft lync 2010 client on 9800

How to Install microsoft lync 2010 client on 9800?
I have tried all possible links to download the files. but how can i integrate it???
Consultant

There is a step by step guide on how to download and install the Lync Client at the technology website, ITProportal
http://www.itproportal.com/2012/06/07/lync-2010-blackberry-client/

Microsoft lync 2010 cannot start. the product license may be expired because you are using a pre-release or evaluation copy of the program

Dear All Good day
i have Lync server 2010 and runing Good
yasterday some users cann't open Lync Client and give us this error Massege
microsoft lync 2010 cannot start. the product license may be expired because you are using a pre-release or evaluation copy of the program, or the product key information may have been modified in your windows
registry . please uninstall and then reinstall lync.
but another users runing Good
i'm try to unistall lync Client and install again but same problem
and Try to Install New server lync 2010 but same problem
please help me for resolve this problem
Khaled Eldosuky
Senior System Engineer
[email protected]

Hi All,
I was not able to uninstall the trial lync client, and re-install a new client? Any help will be appreciated?
All i see is the below message....
microsoft
lync 2010 cannot start. the product license may be expired because you are using a pre-release or evaluation copy of the program, or the product key information may have been modified in your windows registry . please uninstall and then reinstall lync.
Regards,
Venkat

Microsoft Lync 2010

Hi.
Microsoft Lync 2010 installation on existing active directory.
DNS and DHCP working fine. When i installation Microsoft lync server 2010
Error appear :
Checking prerequisite SqlExpressRtc...installing...failure code -2068578304
Prerequisite installation failed: SqlExpressRtc
Please give me proper solution.
I hope you understand. Please early response.

This issue is normal because of following reason:let me notice that installing Microsoft SQL Server 2008 on a Domain Controller is not recommended by Microsoft. For security reasons, Microsoft recommends to not install SQL Server 2008 R2
on domain controllers. SQL Server Setup will not block installation on a computer that is a domain controller, but the following limitation (among others) apply:
You cannot run SQL Server services on a domain controller under a local service account or a network service account.
Microsoft Lync Server tries to install SQL Express using the
NetworkService account. This can cause installation to fail on Domain Controllers; to move forward and get it installed.
So that Lync is not supported to deploy on Domain controller.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical

Integration of CUCM 8.5 with Microsoft Lync 2010 issues

Hi All,
We have integrated CUCM 8.5 with Microsoft Lync 2010 (both Mediation and front end server on Virtual machine on same location) on lab environment, and which is working perfectly on both ways (Two way calls with no issues). But, when we tried configuring the same on live environment, we have no two ways calling between Lync client and IP phone endpoints. Our Mediation and front server are in U.S and CUCM 8.5 cluster are in India and lync clients are in India region, connected via MPLS link and all the traffic ports are open. The following are the configuration on both sides:
CUCM side:
•- Created Direct SIP trunk with MTP enabled.
•- Assigned Mediation server IP address to Port 5068.
•- TCP enabled
LYNC Side:
•- Followed the steps from Cisco Lync integration document through cisco website.
Are they any other configuration requires, when the servers are in different location?

You configure the CUCILync client as a shared line. You then tell the CUCILync client what to control either the desk phone or use the CUCILync client itself. When CUCILync controls the phone it is not registered in CUCM. CUCILYNC will still give a screen POP when the desk phone is controlled.

Migrate to internet explorer 8 and microsoft office 2010

Hi Guru,
We want to migrate to internet explorer 8 and microsoft office 2010 .
Is it compatible with adobe interactive forms ? did we install a new sap note ?
o
Thanks a lot
Soufiene

compatiblity of adobe interactive forms has no relation of which IE version, which MS office version you are using/migrating.
it only concerned with which Adobe reader, Adobe Livecycle designer, ADS version you are using.
regards,
BJagdishwar.

Spa504g with Microsoft Lync 2010

Hi
I just want to ask if the spa504g can be registered to microsoft lync 2010 directly? Does anyone here manage to do this? If not directly then what are the appliance needed?
Thanks

Wrong forum, ask in "small business voice - SPA phones". You can move you post using the actions panel on the right.

Microsoft Lync 2010 and Cisco APs

My company has extensively deployed Microsoft Lync Enterprise voice and this was an upgrade from OCS R2. Staff in my company have complained often of poor calls over wireless. I have resisted applying QoS for now until I understand fully how Cisco APs and WLCs implement QoS. I recently watched a video from Aruba networks comparing performance of Lync calls over its access points and Cisco access points. The Cisco setup was a 3500 AP and 5508 WLC with 7.0.116 code. There were also other bandwidth consuming applications running at the background. I must say that I was impressed at how Aruba's access point performed over Cisco access points. This is because Aruba does application specific QoS and not the traditional client or SSID QoS.
I am considering making recommendation to management to go Aruba for the upgrade of a larger subsidiary. However, before I make such a recommendation,I have 2 quetstions
1. I would like to know if Cisco has revamped its WLC code to better deal with Lync and if so, I would be grateful if I could be shown any documentation or video on how to implement QoS to improve Lync experience.
2. Also if HREAP is implemented, does the WLC still implement QoS or has this to be handled by the switch since packets are locally switched.
I currently have a mix of 5508 and 4404 WLCs with over 300 1041n APs.

Osita,
As far as I know, Cisco has not done any optimization specifically for Lync, but as long as Lync is using standards-based tagging for the latency-sensitive parts of the application (voice and video), then you can elevate your WLAN QoS setting to the appropriate metal to allow for elevated QoS-tagged traffic on that WLAN.
Keep in mind that the controller does not actively tag upstream client traffic, so even if you have clients doing other applications on their workstations over that WLAN, that traffic will not be re-marked from best effort to a multimedia QoS level. I.e., you can have a WLAN that shares both data and voice/video in a Lync environment.
If you want to learn WLC QoS from the best (IMO), here is is Jerome Henry doing a 5-part video series explaining and implementing QoS on the WLC. It starts with Part 1, and the goes to Part 2-a, 2-b, 3-a and 3-b:
http://www.youtube.com/watch?v=44t-0JYEwkA&list=UUm3YBBhcJRokmAD1LaJg3hQ&index=15&feature=plcp
Locally switched HREAP traffic will come out into the switchport marked with the DSCP tag given to it by the application. It is up to you to configure proper end-to-end QoS on your network from there.
Justin

Microsoft Lync 2010 continuously asks for credentials after signing in

Hi,
we have lync 2010 frontend server at our office, it is working fine for the all the users, but one user who will connect our network through VPN it will continuously prompts for credentials eventhough if we are providing right credentials, because of this
user will be not able to recieve emails from his outlook. all other VPN users working fine. how to troubleshoot this issue, please any help?
Regards
Asha

Hi,
The issue may occur if the Outlook integration is not correctly on this client after connecting through VPN. What is the
difference for the location or sign in type between this user and other working users?
Lync generally only prompts you for credentials after you are logged in when it must connect Lync to a linked service such as the Microsoft Exchange Free/Busy service or the Calendar service.
If Lync continues to ask for credentials after three separate dialog prompts, there is likely an issue with Outlook integration or with the Exchange services themselves. I suggest referring to the following information to check the issue.
http://support.microsoft.com/kb/2298541
http://support.microsoft.com/kb/2436962
Regards,
Kent

Download Microsoft Lync 2010 64 bit

Hi,
i am using Microsoft office2010 Home and premium in 32 bit. i want to install Lync 2010 64 bit.
i have already purchase Microsoft Lycn license, when i download Lync 2013 through Office 365 portal, it is showing compatibility issue with Office 2010. Now i want to download Lync 2010 in 64bit full version not evaluation trail version.
I am waiting for your positive response
Thanks
Amit Kumar

You can download the trival version, then activate it with the license.
Lisa Zheng
TechNet Community Support

How do I resolve a confict between Acrobat X Pro and Microsoft Office 2010 running on a W7 Pro 32bit

After I use Acrobat X Pro, and particularly if I have Acrobat X Pro running, the Microsoft Office 2010 programs (Outlook, Excel and Word) become very unstable.
Outlook has a real tendency to crash when I try to add a file attachment to an email.
Word gets mad while trying to find files across a local network.
and Excel almost always crashed while shutting down (the Excel program).
The problem is getting worse (more frequent crashes) as time goes by.
I am not "pointing the finger" at any specific software. I'm just looking for some things to try to resolve my problem with my setup.
If this is the wrong forum for this question I humbly beg your forgiveness (providing you give me a suggestion as to where I should go for help).
Jim

I'm having the exact issues, I guess adobe does not monitor these forum and assist their customers.

OSX 10.5.8 and Microsoft Exchange 2010

Hello
Is it possible to get Entourage on Mac OSX 10.5.8 to work with A microsoft exchange 2010 server? I know it will work if we upgrade to Snow Leopard but some of our staff still have power pc macs and therefore can't use Snow Leopard.
Thanks
Gary

There is no reason why it should not work, it worked with exchange 2003 and 2007.

Tabbed Conversations for Microsoft Lync 2010 - Corrupt .msi

This .msi for Microsoft Lync is corrupt. Where can I contact Microsoft about this?

Hi Avalanche,
I have no problem with extracting the MSI package.
Did you use this method to extract the MSI package ?
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Looking for documentation for CSM and the Lync 2010

hi experts,
Does anybody knows have Cisco any good documentation for the Lync 2010?
We have to setup the CSM for the load balancing as we are not able to use DNS load balanbing method. Or we have done so, but we need to very if things are correct.
Pepi

Hello Dunc_F,
Is this what you were looking for?
http://a248.e.akamai.net/pix.crutchfield.com/Manuals/472/472RADIO2.PDF
B-rock

N8 and Microsoft Lync 2010

Similar Messages

Maybe you are looking for