NAC port bounce feature not working with 3750 12.2(50)SE1 IOS...

Guys, would like to know the support for NAC to cisco IOS 12.2(50)SE1 IPBase version (3750).
We have the port bounce feature in test enviroment on switch 3560 with advance IP services IOS 12.2(46)SE and it was working fine, but now we are facing problem with 3750.
Any clues...

Hi Tarik,
Thanks for your reply, SNMP settings are perfect since am able to manage the switch from CAM, i can change the port settings as well and yes mac-notification change is added automatically except bouncing the ports between vlans.
Am not sure but i suspect this could be the problem with IOS as it is IPBase, but in the test environment it was AdvanceIPservices and everything was perfect.

Similar Messages

Versamail Auto-sync feature not working with AOL mail w/Treo 700p (Verizon)

I'm having a problem with the Auto-sync feature not working with my 700p (verizon) with my aol mail. It had worked perfect since May 2007. Just started having problems End of April 2008. Sounded like I needed another incoming mail server from aol other than: imap.aol.com, aol told me they also use pop.aol.com, that isn't working either. I get an error message that says "last auto-sync attempt failed."....Anyone else having this issue? I'm trying to decide whether to get rid of my aol mail of 14 yrs and use other address to continue using versamail 3.5 or keep aol and use Verizon Wireless sync. I do not like how wireless sync sends mail to outbox and then syncs vs sending right away. Please help...
Post relates to: Treo 700p (Verizon)

I am having the EXACT same problem: Palm 700p, Versamail, AOL, Verizon.
It started about 1 month ago. The GET still works, but AUTO-SYNC does not...After spending hours on the phone with Palm tech support, and reaching someone who said AOL had changed something in their servers. They suggested TRYING Chatteremail, another Palm product. I have tried it for 20+ days out of the 30 days you get for free. It works pretty well, but NOT every e-mail that goes to my AOL acct is making it to my phone. The thing that's great about Chatter is that can be "live" all of time. Not auto-syncing every 15 minutes.
It's very frustrating....The same way the Versamail just stopping auto-syncing is very frustrating. With Versamail, sometimes I did not even get the error message. If Chatteremail worked consistently, I would bite the bullet, and pay for it, but to pay for it, and have it not pull down all the e-mails, all the time is not good.
I spoke to Palm Tech Support in N. America today, and they say the way AOL uses IMAP servers is in a non-traditional way, and it's very hard to deal with. They suggest ditching AOL, and using something reliable for syncing purposes like GMAIL. It's just hard to cut the cord. The man I was on the phone with knew of my problem, and he solved it by getting rid of AOL. It's just tough, since so many people have the e-mail address for me.
On http://mobile.aol.com/aolproducts/mobile-email/mail-client
there seems to be some indication when you click on Smart Phones on left, that Coming Soon is Palm, but I don't know if that's going to be downloadable for 700p, or Palms moving forward. Or how far away that is.
I tried wireless sync and hated it.
This is really a pain in the butt.
*** Who did you speak to at AOL?
*** How did you reach them? e-mail? phone #?
I also did a search and found another program called "Snappermail", which I might try, and see if it's any better than Chatteremail.
http://www.handango.com/SoftwareCatalog.jsp?jid=24BX5EEAD31DXE6AB588D59X31E95BD5&osId=904&siteId=1&N...
If you find anything out, please let me know here, ok? This is very bad for me.
Post relates to: Treo 700p (Verizon)

NAC OOB logoff feature not working

Hi all,
I've deployed NAC in L2 OOB VG mode with ADSSO and I'm trying to use the OOB logoff feature but it's not working. The VLAN change detect feature doesn't work either (I think the two problems might be related).
It will work if each user role is assigned a different auth/access VLAN pair but in my setup, everyone has a common auth vlan and separate role-based access vlans. Because of this, I have to use the IP refresh feature as well (this works fine).
I'm running Windows Vista and version 4.8.0 of the NAC software with version 4.8.1.5 of the agent
I checked the release notes and found that caveat CSCth60233 identifies this bug with the VLAN change detect with the workaround being to refresh the IP address automatically after being logged out. Does anyone know of a workaround for this problem to do this automatically? Is a solution for this problem in the works?
Also would anyone be able to help me with my OOB logoff feature not working? I've configured everything according to the documentation.
I appreciate your responses
~Xavier

Here are my configs if necessary. Tell me if anything else is needed.
User Management > User Roles
List of Roles
Edit Role
Traffic Control
Bandwidth
Schedule
Disable this role
Role Name
Role Description
Role Type
Normal Login Role Quarantine Role
*Max Sessions per User Account             ( Case-Insensitive Session Identifiers             )
(1 – 255; 0 for unlimited)
Retag Trusted-side Egress Traffic with VLAN (In-Band)
(0 – 4095, or leave it blank)(*This option has been deprecated, and it will be removed in upcoming releases)
*Out-of-Band User Role VLAN
VLAN ID VLAN Name                 (if left blank, it will default to the default access vlan             settings in the Port Profile)
*Bounce Switch Port After Login (OOB)
Enable               Disable               (This option is effective only when port profile is set to use it)
*Refresh IP After Login (OOB)
Enable               Disable               (This option only applies to L2 OOB Virtual Gateway with Role VLAN             as Access VLAN and switch port is NOT bounced after VLAN change)
*After Successful Login Redirect to
previously requested URL
this URL:
(e.g. http://www.cisco.com/)
Redirect Blocked Requests to
default access blocked page
this URL or HTML message:
*Show Logged-on Users
User info
Logout button
Enable Passive Re-assessment                          (To enable Passive Re-assessment for OOB Agent             connections, you must also enable the OOB Logoff option at             Device Management > Clean Access > General Setup > Agent Login.)
Re-assessment Interval
(Minimum of 60 minutes and maximum of 1440 minutes [24 hours])
Grace Timer
(Minimum of 5 minutes and maximum of 30 minutes)
Default action on failure
Continue Allow user to remediate Logoff user immediately
(*only applies to normal login role)
Device Management > Clean Access
Certified Devices
General Setup
Network Scanner
Clean Access Agent
Updates
            Web Login   · Agent Login
User Role
Unauthenticated Role(not common) role_engineer role_developer role_admin role_sales role_guest
Operating System
ALL WINDOWS_ALL WINDOWS_XP WINDOWS_VISTA_ALL WINDOWS_7_ALL MAC_ALL MAC_OSX LINUX FREEBSD SOLARIS_ALL SOLARIS_86 SOLARIS_SPARC UNIX VMS OS2 PALM
(By default, 'ALL' settings apply to all client operating systems if no OS-specific settings are specified.)
Enable OOB logoff for Windows NAC Agent and Mac OS X Agent        (This global option applies to all OOB CASs and user roles and enables Agent logout and heartbeat timers for OOB Agent connections. You must also enable this option for Passive Re-assessment to function with OOB Agent connections.)
Require use of Agent
(for Windows & Macintosh OSX only)
Agent Download Page Message (or URL):
           Network Security Notice: This network is protected by a Cisco NAC Appliance Agent, a component of the Cisco NAC Appliance Suite. The Agent ensures that your computer meets the requirements for accessing this network, and helps you keep your computer secure and up-to-date.
Please use the Agent to log in to the network.
If you don't have the Agent software yet, download it by clicking the button below. After downloading the installation file, run it to complete the installation.
If you have already downloaded and installed the Agent, please close this window and right-click the Agent icon in the system tray and choose Login from the menu. Enter your usual network user name and password in the login window.
Require use of Cisco NAC Web Agent (for Windows only)
          Cisco NAC Web Agent Launch Page Message (or URL):
Network Security Notice: This network is protected by the Cisco NAC Web Agent, a component of the Cisco NAC Appliance Suite. The Cisco NAC Web Agent ensures that your computer meets the requirements for accessing this network, and helps you keep your computer secure and up-to-date.
Please launch Cisco NAC Web Agent by clicking the button below.
Allow restricted network access in case user cannot use   NAC Agent or Cisco NAC Web Agent
          Restricted Access User Role:
role_engineer role_developer role_admin role_sales role_guest
          Restricted Access Button Text:
Restricted Network Access Message:
           Restricted Network Access: If you cannot use a Cisco NAC Appliance Agent, you can obtain restricted network access temporarily by clicking the button below.
Show Network Policy to NAC Agent and Cisco NAC Web Agent users (for Windows only)
          Network Policy Link:
Logoff NAC Agent users from network on their machine logoff or shutdown after
    secs (for Windows & In-Band setup, for OOB setup when OOB Logoff is enabled)
     (Setting the time to zero secs will logout user immediately. Valid range: 0 - 300 secs.)
Refresh Windows domain group policy after login
(for Windows only)
Automatically close login success screen after
    secs
     (Setting the time to zero secs will not display the login success screen. Valid range: 0 - 300 secs.)
Automatically close logout success screen after
    secs
(for Windows only)
     (Setting the time to zero secs will not display the logout success screen. Valid range: 0 - 300 secs.)

HP LASERJET SERIES 1200 ( EXTRA FEATURES NOT WORKING WITH MAC OSX 10.10)

I presently have a HP LASERJET PRINTER 1200 SERIES that I had been using my APPLE MAC.
The MAC OS was upgraded recently to Yosmite MAC 10.10
I can still print.... however the extra features as double sided printing is lost.
I have tried reloading the drivers - no luck.
Is it possible to post the exact steps that I should follow on my MAC - in order to load the full HP 1200 series features.
My partner is using Windows 7 PC and his driver is able to work with the full features.
HP Laserjet printer 1200 series PLC 5 driver.
Extra information:
I am access my printer over home wireless network - using my Apple Air device.

This printer supports basic functionality out of the box with Mac OS X 10.10 Yosemite. It's possible you can get more features for your device by installing the 3rd party Gutenprint drivers for Mac OS X. You can download this free driver here: http://gimp-print.sourceforge.net/MacOSX.php.
I am an HP employee.
Opinions expressed are mine and do not necessarily reflect the opinions of HP.
Reminder: Please select the Accept as Solution button on the post that best answers your question. Also, you may select the Kudos button on any helpful post to give that person a quick thanks.

FRUSTRATED!!! HP 6700 Scanning feature not working with my MAC

I just bought the HP Officejet 6700 at COSTCO primarily for its claimed scanning capabilities. The first frustrating warning was that the CD included with the device was not accepted by my IMac. So, I after a half hour of downloading time, I finally was able to set up the printing and Fax capabilities, but NOT the Scanning. The scanner software is evidently there, but it will not recognize the printer/"scanner" even when I click the browse button.
Before I send it back to COSTCO, I just want to make sure that I'm not missing something here.
And, is there anyway to call HP for live support?

Hi realworld,
I have spend the afternoon trying to re-create the issue you are experiencing with no luck. I have downloaded and installed the HP Officejet 6700 e-All-in-One Printer series Full Feature Software and Driver - OS X 10.9 Mavericks...dated 2013-11-15 and it works. I used both the Officejet driver and the Airprint driver, both worked, I am able to scan.
The issue you are experiencing is not the software it seems to be related to the computer or how it may have installed onto your computer. It could even be a firewall. Do you have a USB cable you can connect to see if you can scan with the cable to eliminate weather the issue is stemming from the network or not?
Here are some steps you can try, I have seen great success with these steps being completed in order.
Scrub (Removes all HP software)
Open the Applications folder > HP or Hewlett Packard folder > HP Uninstaller
Click continue, click on one of the printers in the list.
Hold down Control, Option and Command
While holding the three buttons down, Click uninstall
Reset Printing System
Click the Apple icon, and then click System Preferences .
In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or Ctrl +click) in the left panel, and then click Reset printing system…
Click OK to confirm the reset.
Type the correct Name and Password .
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Repair Disk Permissions (I know many of you have done this but because we have now done a scrub it is good measure to ensure non of your permissions differ)
On the Dock, click Applications, and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
Click the Repair Disk Permissions button at the bottom of the window.
Once the repair is complete, restart the computer .
Restart the computer
Click on HP Officejet 6700 e-All-in-One Printer series Full Feature Software and Driver - OS X 10.9 Mavericks to download and then install the necessary software for mavericks.
Keep me posted with how this works out. I am certain this is not an issue with the software. This software was designed and released to work with Mavericks and as explained I downloaded it so I can see it with my own eyes. (I didn't want to insist it would work and find out that there is actually a problem with it )
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

FireWire ports on display not working with Snow Leopard Mac Pro

I just bought a new quad core Mac Pro with Snow Leopard and I have connected it to my three year- old Apple 23 inch cinema display and everything works fine....except for the Firewire 400 ports on the display. They no longer recognize my external iSight camera or external hard drives. And of course the devices will not connect to the computer's 800 ports. Anyone come across this, or have any solutions? I've tried connecting and reconnecting and have repaired permissions. Thanks.

This means that my Firewire 400 ports on the display are no longer supported by the computer?
They need a FireWire connection to the computer. With older computers, the FireWire cable from the display would plug in to a computer FW400 port to provide the connection. With FW800 only computers, you need the adapter.

New Air Port Time Capsule Not Working With Old Airport Express

I have been running a home network comprised of a Air Port Time Capsule (A1254) and 5 ea Air Port Express (A1264) for several years with no problem.
The Air Port Time Capsule (A1254) died and I replaced it with an Air Port Time (A1470). Now none of the Air Port Express (A1264) work, all flashing yellow. All other network functions seem to work okay, Time Capsule Backup, Apple TV, Internet …
I am using AirPortUtility 6.3.1 for setup but do not see any way to setup the Air Port Express.

Reset the Express to factory and start over.. they should work.. are you using all 5 in extend wireless mode?
When you reset the Express click on the wifi icon in the top menu area.. and the newly reset AEx will appear in the list.. click it and Airport utility will open and attempt to automagically connect it to the TC.

Add Attachment feature not working with Reader X

Hello All,
The script behind the "Add Attachment" button in the linked sample seems to conflict when this form is open with Reader X. All other buttons seem to work fine. Moreover, it works seamlessly when opened in older versions of Reader and Acrobat Pro. I have looked all over the internet to no avail. Can anyone provide a solution?
https://workspaces.acrobat.com/?w=CFWFyajThACIiYFq-m4JFg
TIA,
H.Arce

Couldn't figure out a way to share the workspace. I thought that by uploading the file into a shared workspace would make it a public document with a valid link. Guess not!
Anyhow, I've uploaded the sample to Box. Here's a new link: https://www.box.com/s/p0mxx3l79iwjtmak1wv5
Many thanks again.
H.Arce

USB superdrive not working with Mac Pro

Is there a trick to getting a USB Superdrive working with a Macpro?
The drive in the Macpro no longer ejects and have tried connecting the USB drive to both the front and back ports - does it not work with Mac Pros?
Any pointers in the right direction would be much appreciated.

I had a problem my superdrive. It would play dvd's and cd's that were already burnt but would not burn blank DVDs or CDs- in the recent past it had no problems burning. In addition, the Finder would not display the superdrive. When I put a blank disc in it would go to Disk Utilities and would not allow burning. With help from Apple I discovered the problem-- The settings in CDS & DVDs had been changed from When you insert a blank DVD/CD "Ask what to do to to "GO to Disk Utilities". If this sounds like your problem try changing the settings to this:
Try going to; System Preferences/ CDs & DVDs
Change these two settings to this:
When you insert a blank CD: Ask what to do
When you insert a blank DVD: Ask what to do
NOTE: If they are already set to this you probably have a different problem. If they are set to Go to Disk Utilitiy this is probably a solution.
And
Then go to Finder Preferences
Make sure that under "Show these items on desktop:" that the checkbox for CDs, DVDs, and iPods is checked.
Try to burn the DVD again (reload Disc- perhaps restart) and try again.
Don't know how these setting changed but they did. It worked for me.
Message was edited by: pj176

Ip phone is not working with 802.1x port

i can authenticate the pc using 802.1x, but its not working with ip phones...waiting for your kind reply..

The switch is 4006 and the image is cat OS 7.3(2).
The port configuration is
set radius server X.X.X.X
set radius key xxxxxx
set dot1x system-auth-control enable
set port dot1x 3/17 port-control auto
set port dot1x 3/17 initialize

Port mapping not working with 7.5.1

I am having trouble getting Port mapping working with the new 7.5.1 firmware. Port mapping is not working. Port mapping was working fine before update, now all attempts to connect from WAN on ports are rejected. Tested with: telnet <wan-ip> <port>
I have removed and re-added all port mapping entries - no luck. Power cycled several times - no luck.
Other info:
I have an: Airport Extreme (Simultaneous Dual-Band II) running Version: 7.5.1.
It is setup to "Allow this network to be extended"
Network is being extended with an Airport Express with 802.11n running 7.4.2

yeah. I noticed the same thing. now the splash screen comes on without the flashing green squares and just hangs. i tried unintalling and then reinstalling and still no go. kind of annoying but they will probably come out with an update pretty soon

What features of iOS 6 will not work with iPhone 4s?

What features of iOS 6 will not work with the iPhone 4s? There are over 200 added features, but what will be missing on a 4s that you will get with a 5?

All of the features will work, however, some features wont work depending on what country you live in. If you life in America, canada or the UK you dont have to worry about anything

Apple 23 Cinema not working with nvidia 5200...help!!!

Hey all!
I have an Apple 23" Cinema that is not working with my Windows XP machine using an NVIDIA 5200 128meg graphics card. The montior, when booting Windows, just flashes its power light 3 times...goes off...then repeats the sequence.
So, I tried a Dell 2007WFP with the XP machine using the DVI port of the card. When booting, it seems like it's going to fire up the monitor (shows splash screen and Windows logo) but then goes blank when it hits the desktop.
Oddly enough, when I plug in my Apple 30" into the DVI port of the NVIDIA card, it works just great. No fuss or muss (other than a resolution change).
The 23" also works fine with my MacPro BTW so I know the monitor is golden.
Any takers on this one?
Thanks in advance!

Hi Talon, I just accidentally came across your thread. Maybe I can help. I own a 23-inch cinema HD display but mine is ADC and I have to run mine through an ADC to DVI adapter.
Anyways on to the discussion...
The nvidia 5200 is a rather old-ish card (or chipset). The feature set in these older cards are not necessarily symmetrically reciprocal (what?) throughout the feature set. In other words, the feature may work in one mode and not in the another mode...etc...
You may have seen these specs on your 5200 card/chipset:
+Dual RAMDACs (up to 400 MHz) for display resolutions up to and including 2048×1536 @ 85Hz+
and thought this would be great, my resolution is less than that @ 1920x1200 on my 23-inch cinema display. However I believe this may be referring only to the vga output signal and not the DVI. Read on...
Further down in the specs for the 5200 card/chipset you'll see:
+DVI support for compatibility with nextgeneration flat panel displays with resolutions up to and including 1600×1200+
Unfortunately, this is not enough resolution to power your 23-inch display at 1920x1200. Windows may even show the resolution 1920x1200 as available (if you're able to get to the screen) but what I think it's not telling you, it that in order for you to be able to use that resolution you'll need to switch to dual mode DVI, and the card does this automatically.
For example: 640x800 to 1600x1200 uses single mode DVI and anything above that (like our 23-inch cinema HD monitors @ 1920x1200) +using this particular card/chipset+ will be using dual mode DVI whether the monitor can support that mode or not. From my experience with my HD cinema it uses single mode DVI.
As someone said above your 23-inch is in *single mode DVI* and from my experience only accepts *single mode DVI input* from the graphics card.
From my understanding of the specs and your description of the delimma, I would suppose that you are able to get the 30 inch display to work because the 30 inch is a *dual mode DVI monitor* and your graphics card does work in dual DVI mode up to your 30-inch resolution but ONLY in dual DVI mode.
Here are the specs on it:
http://www.nvidia.com/page/pg_20040109440047.html
I hope this helps you out.
If you were to ask my recommendation, I'd go buy a new video card that has higher resolution on the single mode DVI output. I can tell you that my ATI 2600 HD Pro (AGP) (windows version, not mac only) has two DVI ports that are both dual mode DVI capable but also dumb down to single mode DVI signaling at high enough resolution to support our 23-inch cinema HD single mode DVI displays.
Good luck!
Dibit

Dreamweaver CS 5.5 not working with Godaddy FTP with TLS/SSL

I've upgraded to CS 5.5 and tried to connect to a client's Godaddy account with FTP with TLS/SSL it fails. Works perfectly with my mac app Transmit every time as it always has. It doesn't work with implicit or explicit settings with authentication set to none or otherwise.
Can someone please let me know if Dreamweaver will ever be compatible with FTP with TLS/SSL and Godaddy? Or is there some setting I can try that will make it work now somehow?
Been waiting years for this....

SnakEyez02 wrote:
First, that's a Godaddy problem if their security isn't up to par.
That may be the case that Godaddy is also at fault, but every other FTP app I use with Godaddy works fine. It's just Dreamweaver and has always been just Dreamweaver not working with a secure connection to Godaddy. Considering Godaddy is the largest webhost in the USA, you'd think Adobe would have fixed this years ago. I should also mention I'm not endorsing Godaddy and I understand there's plenty of people that don't like Godaddy for very good reasons.
Sent you PM with FTP account with Godaddy yesterday. Thank you for taking a look!
UPDATE: Whoops, I see you responded via private message already. I'll paste most of it here in hopes it helps others to understand the issue:
via SnakEyez02 PM:
Ok this took a lot of digging. I won't say it's not a DW issue 100% and I will report a bug for your problem, but DW is not the problem alone Godaddy needs to share the blame here for a bad certificate. Here is what is happening:
I'll start with DW:
- The settings are correct that were in the post. Port 21, FTP explicit, and the authentication should be set to None (encyprtion only). This is where the transmission is encrypted using SSL, but the certificate is shared and not specific to the domain owner. That is the difference between DW's "none" and "trusted". It's a poor choice of words I'll give them that. However, Godaddy seems to want all connections to be trusted thus the other error you get when you turn on the None option. Now could DW do what Transmit does, warn you and write in an unsigned certificate into the Keychain app, probably, is it best practice for security reasons to "Trust" an unsigned certificate probably not.
Now Transmit:
- As explained above Transmit opens up a prompt to override and create a fake-trusted signed certificate. Thus by forcing the OS to think a legitimate certificate is there it gets you through albeit through unconventional methods.
The problem:
- A good portion of this problem lies with Godaddy. Now I use a shared hosting account and set one up on an independant host for a friend of mine and both of them accept the shared certificates (SSL explicit). The difference is the hostname of the certificate. I ran a traceroute (from Network Utility in Utilities folder) on your website and came up with the following address: 173.201.23x.x.
The problem is that the certificate on your server is actually not for that server which is the reason DW seems to have such an issue with it. The SSL certificate that Godaddy put on your shared server is for host - 173.201.19x.5x. As you can see, it's a certificate for another server. Honestly the fact that Panic's Transmit allows this override scares me a little bit and the fact that Godaddy never noticed this issue either scares me to. So while DW could write in a bad certificate I can see why this is happening.
I know there is not much solice in my answer because it still doesn't alleviate the problem that you have with DW connecting. Unfortunately I do not have a workaround despite my numerous attempts to try and gain access over a secure connection. One alternative you could ask Godaddy for in the meantime is an SSH connection which would allow you to use SFTP instead of FTPS. But that's a short-term solution to a long-term problem.
If you think of anything else feel free to bounce any ideas off me I don't mind. Good luck in getting this solved and I will post a bug report to make Adobe aware of the issue.
Thank you for looking into this issue in depth like you have!
I think the issue might be that Godaddy is applying cost saving measures to keep their prices down in the way they implement their certificates (but it also wouldn't surprise me to know it's simply ineptitude on Godaddy's part either). I'm not sure I fault Panic with Transmit much at all because it clearly warns you about the certificate and it's your choice to continue. And, as it stands now, it's much safer to continue to connect that way with Transmit than to stop and connect with no encryption at all at a public hotspot.
As it stands now, you really shouldn't connect to Godaddy with Dreamweaver at a public hotspot unless you set up an SSH tunnel with your connection first. But enabling SSH is an added expense in many ways including paying for the service, using more computer resources for tunneling and time setting it up and implementation... all because Dreamweaver won't just allow developers the option like Transmit does.
Once again, thank you for looking at this and I hope someone at Adobe finally address this issue for the security of its customers who use Godaddy (which is often not their choice and was, instead, the choice of their clients to use Godaddy as a webhost).
Just a side note, I contacted Godaddy support about this several years ago and they were unresponsive and even hostile about it - So that's definitely another vote against Godaddy from me as well.
Message was edited by: greenbluewave

HP AiO on iOS7 document capture not working with iPad2?

Has anyone else found that the Document Capture does not work with the latest version of HP AiO Remote on iOS7? The app grumbles about "The document capture feature is only available if the camera on your iPad is over 5 megapixels" - any solutions to this problem as we have about 95 iPads out in the business that need to use this function regularly

Hi VijayJois,
I understand that you are getting an error message when trying to use the capture feature in HP's AiO Remote app.
The capture feature in the most recent version of the app will give the error message that you are seeing. A work around to this is to take a photo instead of using capture. The photo is now available in the AiO app in your camera roll to send to the printer, or send via email.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

NAC port bounce feature not working with 3750 12.2(50)SE1 IOS...

Similar Messages

Maybe you are looking for