Name-server importing wrong url?
Dear experts,
I am trying to import a track from NWDI so I can add development components to a software component in the track. The problem I am having is:
I keep getting this error " Syntax of 'nibco.com/nbdc/nibcotst' is not valid : Invalid name: appropriate prefix not found; choose another name or another name server". We haven't had this problem in the past...When I go to CMS->Landscape Configurator and click on display development configuration button I get this configuration:
The url for name-server-url property is correct: http://xxxxxxxx:xxxxx/sld/cimom
But when I import to NWDS the url get's changed:
One NWDS:
Another NWDS:
For some reason it is changing the naming server url on import to http://xxxxxx:xxxxx/sld/name and http://xxxxxxxx:xxxxx/sld. Any help is much appreciated.
Thanks,
Bradley Sorensen
Hi Bradley,
I did not fully read this conversation, but this is how it works in general.
1. Name server is changed in SLD.
2. Track "in CMS' webui -- Landscape Configurator" has to be re-saved in order to have the change reflected there (this is what you have done so far)
3. NWDS development config has to be re-imported on client side. Otherwise it'll consider the old configuration, since after the first sync it creates a local file called ".confdef" and works from that one.
So as a hint: if you have no open activities in your devconfig, you can even delete it from your NWDS and import it again that makes sure it uses the updated devconfig .
There is also an "Update Development Configuration" option in the context menu of the Development Config in your NWDS, but if that would not work give it a try re-importing the development config eventually in a new NWDS workspace.
I hope this helps.
Cheers,
Ervin
Similar Messages
-
Web server generating wrong url.
I am getting following error message in errors file.
warning ( 5394): for host 10.215.152.49 trying to POST <root>/servletWindchillAuthGW/wt.enterprise.URLProcessor/URLTemplateAction, send-file reports: can't find <root>/servletWindchillAuthGW/wt.enterprise.URLProcessor/URLTemplateAction (File not found)
Interesting observation is one forward slash is missing in the above url.
There should be a "/" between servlet and WindchillAuthGW. Hence the error.Can someone tell me what is the reason.Web Server didn't "generate" that URI; that's the URI the client requested. If that URI is wrong, the most likely explanation is a typo in the referring page.
-
No Name Server by Development Configuration import (nw2004s)
I want to import a development configuration in nwds 7.0 but there is no name server found. I have configured the name server in the dtr but i couldn't find the configuration in the sld. Thus the name prefixes aren't transfered to the nwds. How can i configure that?
Hi david,
Have you been able to resolve this problem?
Thanks,
Wael -
Hello everyone,
I getting some error messages from my Office Web App server showing that is being accessed trough the wrong URL. I setup the server to be accessed trough HTTPS for internal and external trough
the same public domain. However there is still something making the server being accessed trough the FQN instead trough my public domain name. I also have my public domain name pointing to my Office Web App server on the DNS server. I'm able to open documents
using Office Web on SharePoint without any problem in most of the workstation. However at least one computer is giving me an error when I try to open a document from Office Web App, "run into a problem".
Below is how I setup Sharepoint 2013 and my Office Web App 2013 and the error log:
Thanks
Office web server:
New-OfficeWebAppsFarm –InternalUrl “https://app.contosco.com” -ExternalUrl https://app.contosco.com –CertificateName
"app.contosco.com" –EditingEnabled
Sharepoint server:
New-SPWOPIBinding –ServerName "app.contosco.com"
Log Error:
Log Name: Microsoft Office Web Apps
Source: Office Web Apps Monitoring
Date: 2/27/2014 2:39:54 PM
Event ID: 1011
Task Category: (4)
Level: Error
Keywords: Classic
User: N/A
Computer: officeweb.contosco.local
Description:
<?xml version="1.0" encoding="utf-16"?>
<HealthReport xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<HealthMessage>BroadcastServicesWatchdog_Wfe reported status for BroadcastServices_Host in category '4'. Reported status: Contacting Present_2_0.asmx
failed with an exception: An error occurred while making the HTTP request to https://officewebserver.contosco.local/m/Present_2_0.asmx.
This could be due to the fact that the server certificate is not configured properly with HTTP.SYS in the HTTPS case. This could also be caused by a mismatch of the security binding between the client and the server.</HealthMessage>
</HealthReport>
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Office Web Apps Monitoring" />
<EventID Qualifiers="0">1011</EventID>
<Level>2</Level>
<Task>4</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-02-27T19:39:54.000000000Z" />
<EventRecordID>4537339</EventRecordID>
<Channel>Microsoft Office Web Apps</Channel>
<Computer>officeweb.contosco.local</Computer>
<Security />
</System>
<EventData>
<Data><?xml version="1.0" encoding="utf-16"?>
<HealthReport xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi=";
<HealthMessage>BroadcastServicesWatchdog_Wfe reported status for BroadcastServices_Host in category '4'. Reported status: Contacting Present_2_0.asmx
failed with an exception: An error occurred while making the HTTP request to https://officewebserver.contosco.local/m/Present_2_0.asmx.
This could be due to the fact that the server certificate is not configured properly with HTTP.SYS in the HTTPS case. This could also be caused by a mismatch of the security binding between the client and the server.</HealthMessage>
</HealthReport></Data>
</EventData>
</Event>
flavioHi,
According to your description, my understanding is that the Office Web Apps cannot render the documents.
The error message is very common, please check the Event Viewer and ULS log to get a detailed error description.
Here is a similar issue link for you to take a look:
http://www.wictorwilen.se/office-web-apps-2013-excel-web-app-ran-into-a-problem---not-rendering-excel-files
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support -
Name server not updated in development configuration after change of SLD
Hi Guys
Hope you can help me with this one.
We have moved our SLD from one server to another.
After this we changed the name server in NWDI and in NWDS.
In NWDS i removed the development configuration and reimported it, but when I do this, a popup box shows the details of the development configuration and the name server is still the old SLD server. This means that when I start the NWDS I get an error saying that the name server host is unreachable.
Where do I change this?
I found out that the name server is setup in the .confdef file under .dtc\0 in the field called name-server-url. If I change this manually in the file, it works. But if I remove the development configuration and reimport it again, I am taken back to the old name server again.
It seems as if something has to be changed in NWDI, but I can't figure out what.
Can anybody help?
Cheers,
Jacob VennervaldHi Jacob,
I would proceed as follows:<br><br>
- login to your new SLD<br>
- go to the technical systems in the landscape area of the SLD<br>
- in the filter drop down select AS JAVA<br>
- check if your NWDI has reported to this SLD in the last 12 or 24 hours, you can check this on the "last update" column<br>
- if your system has reported to this sld the last few hours this is good if not go to the step "change J2ee to new sld" i will descirbe later.<br>
- remember the name of the system here. it is like sid on dbhostname.<br>
- got to sld administration (link on top) choose content maintenace in administration<br>
- in the subset filter select "All with instances" as class set SAP AS JAVA Cluster<br>
- you should find your system there. click on it.<br>
- in the new screen find a link in the middle top <nr> associated instances -> click it<br>
- in the next screen you will see the relationship of the technical system to the rest of the sld data.<br>
- there should be a topic called "hosted application server"<br>
- the should be an entry like: system landscape directory: sld on sid on server -> click it<br>
- here you will see the data for this hosted system. You can find the cim/url definig the SLD you will find the roles. Landscape and name server should assigend and so on here you can chage the SLD url. <br><br>
You can although proceed as follows. This as well requieres you nwdi to report and use this sld in j2ee see below if not.<br>
- on sld startscreen choose landscapes in the landscapes part of sld<br>
- select landscape type nwdi systems<br>
- if there is no landscape you can create one<br>
- in the landscape ypu can assinge systems. The sld should be availabel to choose.<br>
- once in the landscape you can view the system and you can change the CIM Server url and the roles there aswell its just another view on the content.<br>
<br>
you can although check:<br>
- open name reservation from develpoment part of start screen<br>
- here you should find a button about enabling or disabling the sld for nwdi usege. this should be of course enabled...<br>
<br>
<b>"change J2ee to new sld" <br>Ok and here what to do or to check if you are not sure if your NWDI uses/reports to the new sld.</b><br>
- Go to the nwdi server an open Visual admin i asume you are running a 7.0 Di if not let me knoe i can although tell you for CE.<br>
- ok in VA. select on of your server nodes->services->SLD data supplier.<br>
- an overview page will show up.<br>
- select the http settings tab in the lower middle.<br>
- https settings will tell the j2ee where to report to. Verify the data and change if needed. use the lightinigbolt button on top to transfer data to the sld. have a little patiance if your data is not shown immediately in your sld,. it may take 1-2 minutes until it is shown in the gui.<br>
- switch to cim client generation tab. those paraemters will tell your j2ee from what sld to read data from. It is important to understand that you may report to one sld but to read from antioher. depending on your sld landscape. The CIm CLient should use the same Sld as your NWDI uses in CMS setting.<br>
- if all is setup. do a cim client test.<br>
<br><br>
Allright. This is all I know on how the NWDI is integrated in SLD. Hope you can resolve your problem wiht this steps.
<br>
Have a good time<br>
Jan -
Who can tell me what the host name (server name) is that I need to use when I add my Apple e-mail address on my iPhone?
I already have a hotmail.com address on my iPhone. So I wanted to add my Apple [email protected] e-mail address.
Thank you.Hi,
Even I faced same issue and able to discover it. One of the reasons for Axis "faultString: (400)No Host matches server name localhost" is due to invalid/wrong TargetEndpointAddress. Please check the TargetEndpointAddress URL in call.setTargetEndpointAddress( endpointURL ), endpointURL should be your service published path (.wsdl file).
Cheers!
raagoo -
Role Name Server defined in SLD but no CimomURL maintained
Hello gurus!
We have a problem with our NWDI setup.
What I want to do is to update an existing track DFODEV02 with the software package EP-RUNTIME.
I synchronize with the SLD. However when I try to save, I get the following error:
"SLD (URL http://<NWDI_server>:<port>)
server exception: Invalid Name Server null - Check SLD configuration -> Role
Name Server defined in SLD but no CimomURL maintained."
I am not familiar with the customizing for this but I have looked into a couple of customizing steps related to Data Supplier:
1) Under administration on SLD I see the following:
Update Namespaces is marked as sld/active; but
Update Other SLDs is an empty list.
2) From the configuration on NWA:
Target URL: <RuntimeSLD_server>/sld/ds
Both 'Automatic send' and 'success' are both "true".
Hope that you can guide us on the right “track”
In advance, thank you very much!
Best regards,
EliasHi Elias,
1) Under administration on SLD I see the following:
Update Namespaces is marked as sld/active; but
Update Other SLDs is an empty list.
This is something else, your error message is not about this one.
What you need to make sure is that you have a name server defined.
You can check it in various ways:
A). go to CMS -- Track Data -- select the track in question -- tab Build Variants -- Display/Download the Development Configuration --> This will be an XML file. If you see a tag "sld-nameserver" then you are ok, however I assume this tag is missing or points to a wrong SLD in your case.
B)
Go to the initial page of the SLD.
2. Choose Landscapes.
3. Choose New Landscape…
4. In the page that appears, select the landscape type NWDI System.
5. Specify NWDI as the name of the landscape. Choose Create.
The new landscape is displayed.
6. Select the new landscape.
You see the details about the landscape.
7. Choose Systems and then choose Add System to Landscape.
8. Choose the hosted system type System Landscape Directory. Choose OK.
You see the installed SLD.
9. Select the SLD.
The details view appears.
10. Select the roles Landscape Server and Name Server and save your changes.
The name server is now known to the NWDI and can be used there. Only now can you create valid development configurations.
Could you please confirm this way whether you have a name server specified and that points to the correct SLD ?
I hope this guides you to the right "track"
Regards,
Ervin -
After setup name server from SLD name prefix is still unavailable from nwds
Hi there
Although the nameserver is setup from the SLd, our developper team has told me that it does not work.
One of them has showed me from nwds, and I do not know how to fix it.
The name list is still unavailable from nwds while New Development Component creation:
Does anyone have any idea ?
Thanks,Hi,
yes, there you should see the nameserver.
Proceed this way: Go to CMS webui -- Landscape Configurator -- Track Data -- select the track in question from the left hand side table -- RE-SAVE the track (Change and Save).
This action will update the server side development configuration.
Once the track is resaved, doublecheck the changes in the devconfig XML you can access on the Track Data -- tab Build Variants -- Display Development Configuration. An XML file will be opened where you should have an entry for nameserver. It'll look like
name-server-url="http://<your host:your port>/sld/cimom"
If it is correct, then open your NWDS and remove and re-import the development configuration.
Or try to trigger "Update" on it as you can see in the blog I sent you, but if that does not work then remove and reimport.
Check again the settings you have showed me recently on the screenshot, this time the "Name Server" on the Component Properties should not be empty any more.
I hope this helps. Let me know the results.
Thank you and Regards,
Ervin -
NWDI for the 04s preview fails with 'SLD name-server configuration error'
After the installation, everything seems to work fine except that when I go to CMS, the links on the top seems to be hardcoded to point to http://pwdf3102:50100/dtr, even in the Domain Data. When I tried to change it to my local server, it keeps complaining about "Unexpected error; inform your system administrator: <Localization failed: ResourceBundle='com.sap.cms.util.exception.CMSExceptionMessages', ID='SLD name-server configuration error', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key SLD name-server configuration error"
Any suggestions on how to work around this? Thanks.Brian,
Try to import the model file first by going to SLD->Administration->Import CIM Model. If the problem sticks, then try to remove the systems. The preview version has lots of pre-exist system name in the technical system, which you can find giving errors since they're not reachable. So you can remove them from SLD (Home->Technical Systems) if they are preventing you from procceeding.
You need to go to http://server:port/dtr/system-tools/administration/NameServerConfiguration to update the name server as well.
Hope this helps...
Message was edited by: Yujian Yan -
Wrong URL in Web Dynpro Application explorer
Dear Team,
The Web Dynpro Application explorer is showing wrong URL:
URL HTTP://server2.domainname.COM:1090/sap/bc/webdynpro/sap/zz_pt_hello
And this is not a correct URL.
Where as the actual URL should be :
https://server1.domainname.com:8030/sap/bc/webdynpro/sap/zz_pt_hello
But when I test the service, /default_host/sap/bc/webdynpro/sap/zz_pt_hello, in sicf t-code, the test works successfully with the desired URL i.e. https://server1.domainname.com:8030/sap/bc/webdynpro/sap/zz_pt_hello.
the profile parameter: icm/host_name_full has value server1.domainname.com.
Please guide me to resolve this problem.
regardsHi,
The hostname for the application server is checked by the following parameters in this order. Can you please verify that the SAPLOCALHOSTFULL is the correct hostname.
(1) SAPLOCALHOSTFULL
(2) icm/host_name_full
If both of these are correct can you check the Hosts file in the /etc/hosts folder for the correct entry.
Michael -
Speed internet browsing via a local domain name server
Is it possible with leopard to create a local DNS to speed up browsing on the internet on Leopard? If so, how do you go about it?
Hi Uday,
I have eventually managed to install minisap - I installed MaxDB to answer your question.
I unchecked a checkbox that was asking for a FQDN and then the domain name server is no longer mandatory.
However, when trying to run webdynpro applications I now get a shortdump that shows a CX_FQDN exception. It says:
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_FQDN', was not caught and
therefore caused a runtime error.
The reason for the exception is:
Die URL enthält keine vollständige Domainangabe (john-pc statt
john-pc.).
I don't understand the German, but john-pc is my computer name and I was prompted during the installation to replace localhost in my host file with this.
The url of the webdynpro application includes this, for example:
http://john-pc:8000/sap/bc/webdynpro/sap/z_hello_world
Would you know how I now resolve this?
Many thanks,
John
Edited by: John Watt on Mar 15, 2009 7:01 AM -
Unable to connect siebel gateway name server during configuration enterprise server
Hi,
when I try to configure Siebel enterpise after entering the port of the gateway server name I get the following error: "Unable to connect gateway server name".
I perform the following steps:
1) Configuration Gateway Server Name
Entered port TCP/IP = 2320
Enable automaticaly start server gateway name server
Show pop up "Configuration siebel succesful"
2) Configuration Enterprise Server
Entered name account authentication gateway server name = SADMIN
Entered passoword account authentication gateway server name = SADMIN
Entered name host gateway server name = VDIMTNSIEBEL01 (name my machine)
Entered port TCP/IP gateway server name = 2320
show pop up error : "Unable to connect gatawey server name"
I can not find the log file in order to understand the issue.
When I try to connect to the gateway from the browser with the url
vdimtnsiebel01:2320 I get this screen mode:
???@??????? ?????????? ????????QÈ ??? ??????????? ??? ??? ? ?h????
and writes this log in the file "C:\siebel\8.1.1.0.0\ses\gtwysrvr\log\NameSrvr.log
SisnapiLayerLog Error 1 0000001151c810a0:0 2013-06-25 10:11:27 4980: [SISNAPI]: Rx msg len=0 peer=VDIMTNSIEBEL01.ISCVDI.LOCAL avail=325 Hello expected session=13
474554202F66617669636F6E2E69636F
20485454502F312E310D0A486F73743A
207664696D746E73696562656C30313A
323332300D0A557365722D4167656E74
3A204D6F7A696C6C612F352E30202857
696E646F7773204E5420362E313B2057
4F5736343B2072763A32312E30292047
65636B6F2F3230313030313031204669Hi,
Please clarify me the following.
You specified the login name as 'SADMIN'. Is this the login id, that you used for your Operating System? "Entered name account authentication gateway server name" expects you to enter the NT login, not the DB login.
You may also expected to specify your network name, if your login id is specific to a network. e.g Oracle\Rajkumar assuming that Oracle is your network and Rajkumar is the user name.
You may not expected to have the DSN created, as Gateway may not be interested in knowing which DB you are connected to. And you neither enter the 'DB name' anywhere in the 'Gateway Server Configuration', if my understanding is right.
Please confirm.
Below pages are for reference (not directly relevant to your question):
http://docs.oracle.com/cd/B40099_02/books/SiebInstWIN/SiebInstCOM_Prep18.html
Bookshelf v8.0: Requirements for Siebel Gateway Name Server Installation and Configuration
Thanks.
Regards,
Rajkumar Raju -
Hello,
When I start my form inside form developer a wrong URL is launched:
http://%%20"http://........"
instead of
http://.....
Where can I correct this setting?
Thanks in advance.
AnnaYou may also need to explicitly set the browser executable in the preferences. You set this in the same screen where you set the Application Server URL.
-
How to active Name Server for NWDI
Hello,
I would you to activate name server for ou nwdi.
The SLD is not installed on nwdi, we use a dedicated SLD Server. The SLD url is filled in the development configuration in CM Services.
From the SLD, in the reservation name part, the "Enable this SLD as name Server for NWDI" button is not available :
I have tries to follow this tutorial, but it is designed for netweaver 7.0 :
http://help.sap.com/saphelp_nw70/helpdata/en/2f/a72f41b239a831e10000000a1550b0/content.htm
Does anyone know how to activate this feature ?
I refer to this button :
Thank for help.Thanks Irwin !
The button is shown now.
But in the landscape link, our nwdi system did not listed :
I have had one of my nwdi system, choose "add system" in systems tab.
But there is no option :
Thanks -
Asynchronous reserve finally failed: missing name server configuration
Hi,
can anybody give me a hint why we get these errors?
"asynchronous reserveFinally failed: missing name server configuration, no logon known -> operation will be retried name reservation : name server=http://sapcoe01.bbn.hp.com:50000/, category=SAP_DevelopmentComponentName, name=hp.com/appl/tax, reservationKey=63415681, state=FINALIZE_PENDING"
The development objects are listed in SLD with status PRERES. The Name Server location is configured in DTR with the logon data. The name server is also listed in the development configuration.
Where else could be the cause for this error?
Many thanks for any hints!Hi Martin,
Here you can see the *_PENDING items: http://<host>:50000/dtr/sysconfig/support/NameReservationList
And here you can configure the name server: http://<host>:50000/dtr/system-tools/administration/NameServerConfiguration
The solution is to define your name server a second time with a slightly different URL. The first entry you already defined probably uses the fully qualified hostname, e.g. <i>http://<host>.mycompany.com:50000/sld/cimom</i>. Define the same name server again but <b>without the domain</b> and <b>without the /sld/cimom path</b>, e.g. <i>http://<host>:50000/</i>. Actually it should correspond to what's shown in the error message, e.g. "operation will be retried name reservation : name server=<b>http://<host>:50000/</b>,". When you click Save Configuration, the pending items in the queue will be processed. The only problem we have left is that "after some time" the 2nd entry we just defined dissapears and we need to configure it again (and again and again...)
Kind regards,
Sigiswald
Maybe you are looking for
-
Dear All, Can any one tell me how to delete the sale orders, we are having 5000 open sale orders, we need to delete all those sale orders at a shot, is there any standard transaction for deleting all the sale orders at a time. Thanks in advance Regar
-
Some tips to install Windows 8.1 on Satellite L650-1L4 required
Hey there, I just got my notebook back from support since my harddrive failed last week. So, since I'd have to reconfigure everything anyways, I'm thinking about installing Windows 8.1, which I can get through a student program of my university. The
-
How to add custom texts in Office Templates for the COBRA form set up
Hi, How to insert custom texts in the copied BDS form from COBRA set up. I could not edit the text. I can edit the contact numbers in the standard text and displaying after saving the document. I do not know how to proceed for this. Please share your
-
I have written a few custom xmp panels that work beautifully in PS, IL, IND, Acrobat, Portfolio etc.. Alas I can't seem to access this info in LR. Am i missing some crucial step? I have the txt file in the adobe custom xmp panels folder but it is now
-
How far back does script UI go?
I have a script that runs all the way back to CS I was wanting to update it and add fancy UI I was wondering how far back I can go?