NAT/Gaming issue on Motorola NVG510

I've run into this problem before and it has eventually solved itself, but I thought I'd see if there's a better solution out there. When I go into NAT/Gaming and select a service and then click the drop-down box for "Needed by Device", I see only a partial list of the available IP addresses on the network. Frequently it does not have the one I want and it is a fixed list so I am unable to type it in. The IP address I want to add DOES show up in the Device List. As I said, if I exit out and come back some other time, it will fix itself and show all IP's, but it is annoying to have to do that! Thanks for any help anybody can provide.

Similar Messages

PS4 Party Chat NAT Type Issues

Anyone else completely irritated and annoyed by the inability to party chat because of NAT Type? This is a ridiculous error I thought they'd fix in the next patch, turns out not. I have been unable to chat with anyone because of my NAT Type. I can play online and chat online just fine but party chat doesn't work. My NAT is Type 2. I don't want to hear I need to set up a static IP and DMZ blah blah blah. That stuff is way to complicated and shouldn't be necessary if I or any PS user should want to chat in a party. I had absolutely no issues on my xbox 360 chatting in a party and I'm on the same modem and internet router as it was. I bought a PS4 to play and chat with friends and so far I haven't been able to chat with my friends at all. It's very irritating and annoying and I would like PSN to do something about it. A simple patch or anything to fix it, instead of being lazy and telling their 13 year old customers they have to set up static IP's and other ridiculous stuff. Please comment if you are having the same issues and hopefully Sony or PSN will see this and do something about it. I paid 400$ for a machine that requires me to hack into my own router in order to chat... Ridiculous.
Party Chat NAT Type Issues on PS4
This issue has been reported to the network team who are investigating the cause of the problem. As a temporary fix you can normally fix the NAT type error by on or more users leaving and re-joining the party.

I draw your attention to the last paragraph where it states a NAT Type 2 connection means its connected correctly & optimal for gaming
PS4 NAT Types:
In the network settings of the PS4, it uses 3 different NAT types to classify how the PS4 is connected to the Internet:
Type 1: The PS4 is sitting directly on the Internet with a public IP address. This setup doesn’t require NAT or inbound port forwarding and is used in scenarios where the PS4 is the only device wanting to use the Internet connection. This isn’t that common as most users share their Internet connection with other devices in their home.
Type 2: This is the most common and ideal type where the PS4 is sitting behind a RG that is performing NAT. The PS4 will have a private IP address which is translated to a private or public IP address by the RG.
Type 3: This usually implies you have a problem in the way the PS4 is accessing the Internet. This may be caused by a firewall or port restrictions. This isn’t ideal and will result in a sub-optimal gaming experience.
The difference between a Type 2 and Type 1 NAT is usually physical and can’t be changed by settings alone. If you have a Type 2 or higher NAT type then you are connected correctly and can have an optimal gaming experience.

How do I bridge motorola NVG510 to work with Airport Extreme

Hey everyone, I need some help.
I just got uverse and they sent me a motorola Nvg510 router. I need to put it under bridge mode so I can use the airport extreme and use the guest network functionality. I don't know what settings to put the motorola router and the airport extreme. Any help would be greatly appreciated. Please let me know if I have to provide any more information.
Thanks,
AC

I've put up a webpage to explain how to "force" the modem in effective bridge mode here:
http://www.ron-berman.com/2011/11/24/motorola-nvg510-help-page-for-att-u-verse-u sers/
(See question 6).
To get the IP address, just use what your NVG510 reports as "Broadband IPv4 Address" in the Broadband tab of its configuration page.
This address is mostly static (hasn't changed for me in months), and will only change where AT&T make a physical change on the line.
- Ron

How can I resolve a NAT config issues with Arris router & AE

I'm having NAT conflict issues. None of the existing threads on the forum match my configuration. I have an Arris Cable Router/Modem (Time Warner) with 4 ports. Port 1 feeds an unmanaged switch for ethernet connected devices, and port 2 on the Arris router feeds and Airport Express. Getting "Double NAT Status" on airport utility for the AE. How can I resolve this while not effecting my wired devices ? Thanks so much !

To resolve the NAT conflict you simply need to reconfigure the AirPort Express as a bridge.
You would do so using the AirPort Utility, as follows:
Run the AirPort Utility, and then, select the AirPort Express.
Select Edit.
Select the Network tab.
Change Router Mode to: Off (Bridge Mode)
Select Update and allow the Express to restart.

So my airport extreme recently had some nat/dns issue and in the airport utility displayed a warning about it and to correct it. I wasn't sure what to do so i pressed the resolve icon and now my guest network is not working.

So my airport extreme recently had some nat/dns issue and in the airport utility displayed a warning about it and to correct it. I wasn't sure what to do so i pressed the resolve icon and now my guest network is not working.

Anytime you change networking hardware, it is always a good idea to perform a complete power recycle of your networking components.
I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

Internal DNS server and NAT routing issue.

Hi -- I am not terribly experienced with DNS and I am running into an issue that I can't seem to resolve. My company.com DNS information is hosted by an outside ISP for email, web, etc... but I have configured an A record there to point to the public IP to my mac os x server (server.company.com).
We have a cisco router configured with one to one NAT from the public IP to the internal IP for our server in a 192.168.15.x subnet. The same router is running DHCP and and NAT on that subnet under a different public IP provided by our ISP.
Our server is running DNS with recursion and has a "company.private" zone set up for internal services and machine names. Thus, the server is accessible via "server.company.com" from the outside and "server.company.private" from the private LAN.
The problem is that I would like to be able to access some services simply via "server.company.com" both inside and outside the private network. Now, accessing the "server.company.com" services from the private lan does not work because the name resolves to the external IP and the external IP cannot be used internally due to NAT.
Is there a way to configure my internal DNS server to respond with the appropriate private address when receiving a query only to "server.company.com" and forward requests on for anything else on "company.com"?
I know that I could manually duplicate all entries for our domain from my ISP and host the same entries for internal clients, but it would be much easier to only have our server handle requests for itself. The server is running OS X Server 10.4.11.
Thanks

Is there a way to configure my internal DNS server to respond with the appropriate private address when receiving a query only to "server.company.com" and forward requests on for anything else on "company.com"?
Ordinarily, no. Once your server thinks it is responsible for a zone (e.g. company.com) then it will answer all queries for that domain and never pass them upstream. Therefore you'd have to replicate all the zone data, including all the public records, and maintain them both.
The one possible exception to this (I haven't tried) is to create a zone for server.company.com that has your internal address. In theory (like I said, I haven't tried this), the server should respond to 'server.company.com' lookups with its own zone data and defer all other lookups (including other company.com names since they're not in a zone it controls). Might be worth trying.

Gaming issues and heat issues, running windows 8.1 pro via bootcamp

I have a few problems, and I don't know what else to do, then to write for help here..
I really hope someone out there can help me, because I have had this problem since I bought my laptop mid 2012, and I got smarter since then, so now I know that I actually shouldn't have these problems, it's not because my very expensive laptop is bad, or that it is a laptop or because it's a mac, regardless of what people say, I'm positively certain that it's a problem which shouldn't be there.
I have pretty great specs, (trust me i checked them out, not the best in the world, but pretty good) yet I can't enjoy 1 single mmorpg game like, Tera, or the new Archeage (currently in open beta), or any other game, (swordsman online)... Even though people say Tera has bad coding, I have tried adjusting things for weeks if not months, NOTHING helps, i get a frame rate that is from 0-25 very unstable, usually around 7-12, and sure if I go the lowest settings in the games I can get very unstable framerates but i guess they can get up to around 35-72 but drops to like 7 or 3 sometimes as well, so even on the LOWEST settings in the games I can't enjoy the games fully... It lags and such because of the low fps ofc...
Other than that it also have a heat issue, mostly when running windows 8.1 in bootcamp.
It get's quite hot, just by opening a browser window, and yes i have tried reseting smc, and p-rams, many times.. nothing seems to help.
And even if it helped the heat problem, the gaming problem is still there.
Now to my specs: (I have the macbook pro retina, mid 2012, 15 inch)
- Prosseser: 2.6GHz quad-core Intel Core i7 processor (Turbo Boost up to 3.6GHz) with 6MB shared L3 cache. "Core i7" processor (3720QM)
- Memory: 16GB 1600MHz DDR3L onboard memory
- Storage: 256GB ssd flash storage. (Seperated into os x = 130GB, windows 8.1 pro = 120GB) Running games and such from my 1TB external harddisk.
- Graphics and video support:
Intel HD Graphics 4000
NVIDIA GeForce GT 650M with 1GB of GDDR5 memory and automatic graphics switching
Dual display and video mirroring: Simultaneously supports full native resolution on the built-in display and up to 2560 by 1600 pixels on up to two external displays, at millions of colors.
And here's a link to see what is inside it for yourself: http://http://www.everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core- i7-2.6-15-mid-2012-retina-display-specs.html
When that is said, apple's warranty has run out, and I didn't buy apple care, but I still have warranty from the store (humac) I bought it in, because in my country the law is warranty 2 years, no matter what, but if i can avoid it, I REALLY would like to avoid switching it out with a new one, since there could be problems all over again, and I would lose what I have on it right now, plus it's a hassle to get a new one, they will always try and fix it for a long long time before they give a new one, and probably can't find the problem...
But if that's the only thing i can do about it, I will ofc, but just don't advise me to do that, unless there's no other solution to the problems.
Please help me.
ps: sorry if I posted it the wrong place, I wasn't allowed to post it the right place by apple...

If the underlying hardware was exposed correctly by the CSM-BIOS when Windows was installed, your Device Manager should look like this.
If the Windows installer did not see any devices as your screen indicates, Windows will use generic software-based drivers which will be very slow and painful.
Rudegar ... I think the Windows installer did not see any hardware, otherwise there should be HW with yellow triangles with exclamation marks.

Adobe Connect Mobile issues on Motorola RAZR

While trying your Adobe® Connect™ Mobile application (version 1.7.5) on one of our latest Android-powered handsets--the Motorola RAZR (XT910)--we encountered a couple of issues that we thought you should know about. The text on the "whiteboard" will appear distorted when sharing between a PC and the handset, making it difficult to read.
Steps to reproduce:
Launch the application client on both a PC and the device
Login with a username and password on the PC and as a guest on the device
Select "Collaboration" on the PC client
Select the "T" on the whiteboard for text
Select anywhere on the whiteboard and begin typing a note. Notice that when it shows up on the device the font can be difficult to read.
We hope that this feedback is useful to you in making your application the best it can be on the widest possible range of Android devices. Device specifications for the Motorola RAZR device can be found at http://developer.motorola.com/products/razr-xt910. Also note that you can get early and exclusive access to everything you need to create apps for Motorola's newest devices by joining our App Accelerator Program (AAP).
If you have any follow-up questions or observations, please post them to our community discussion boards at http://community.developer.motorola.com/mtrl/.
Thanks,
MOTODEV Technical Support
Motorola, Inc.

I believe it doe run on AIR.
What do you mean by native extensions? Do you mean objects you can load in the Share pod and have it work in the mobile app?
I know that you can load PPT(X), FLV, JPG, PNG, and MP3 file and they should display properly in the mobile app. MP4, F4V, and PDF may also work, but I'm not 100% sure on those.
I do know that SWF content does not currently work in the mobile app.

Issue getting Motorola 9060G scanner to work with 5508 WPA-TKIP

All,
We have a new 5508 controller that we are trying to get setup to use our Motorola 9060G handheld scanners. This device uses WPA-TKIP and has been working with a Symbol controller without issue. I need to retire this controller so started re-creating the SSID on the Cisco controller. I am having issues getting the scanner to connect with the new SSID. It looks like everything works fine with no security but once I start to enable WPA+WAP2 I get no connectivity. Laptops work fine just not the handheld. I have tried every combination I can think of for AES and TKIP under the WPA and WPA2 policies. I have also gone through the Cisco Best Practices guide for Motorola/Symbol Wireless Handheld Scanners and so far unless I have no security I cannot get things to work properly. I tried doing a debug client to see what or how the two are talking but I can only get results with security set to open. Just looking for other suggestions as to something that I might be missing. My controller is running 7.6.100
Thanks ...
Brent Berry

We have a new 5508 controller that we are trying to get setup to use our Motorola 9060G handheld scanners. This device uses WPA-TKIP and has been working with a Symbol controller without issue. I need to retire this controller so started re-creating the SSID on the Cisco controller.
Just be aware that the Wi-Fi Alliance has scheduled the "elimination" of TKIP. What you are about to do is a "temporary" solution. You can get the scanner to work now because you are using WLC firmwares that still support TKIP. However, if (in the future) you need to upgrade your controller's firmware to support newer wireless access points, your scanners may not work any more.
Read HERE.

Z97-G45 Gaming ISSUES..

Hi all..
I have the Z97-G45 Gaming board in my pc.. recently installed it.
I am trying to install windows 7 and having a nightmare with it.
The OS seems to install ok, when it comes to reboot to finish the installation I will get a BSOD
If then i reset it again it may boot up ok and get onto the desktop.
If I then shutdown the PC.. on next boot I get the EFI shell inferface and the SSD drive that I am installing to has dissappeared from the BIOS and I cant select it to boot from at all.
If I then turn off and on again, the SSD drive may re appear, system will boot. Then again, if turned off and on again the SSD drive seems to dissappear and I get the EFI shell again.
I have changed my SSD.. same problems happen.. I am on my 2nd motherboard now... same thing happening..
I have tried a new PSU.. same issues.. changed RAM and GPU same issues..
Flahed latest BIOS when I got windows to load but still same issues
Its driving me INSANE.. Can anyone shed any light on this problem for me?
Thanks, Dan

As signature with AMD system obviously doesn't match the system in question follow >>Posting Guide<< and add specs.

G400s gaming issues and auto shutdown

i bought the G400s since the vendor told its great for work as well as gaming but whenever i play high graphic online games like League of Legends or Assassin's Creed brotherhood, it always says driver IRQL not less or equal. Can someone please help me to solve this issue since i have only 1 week holidays left for gaming!
and by the ways its not always driver irql. there are times when it says different stuff and the computer needs to shutdown.
looking forward for help

If your XBOX is wired or Wireless to the Router?
If your XBOX are wireless then login to the router setup page and change the Wireless Channel on your Router to 1 or 11, and then under the Advance Wireless Settings tab change the Beacon Interval to 50 >>Change the Fragmentation Threshold to 2201 Change the RTS Threshold to 2202 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

MOVED: MSI GTX 980 Gaming issue

This topic has been moved to GAMING Graphics Cards.
https://forum-en.msi.com/index.php?topic=254895.0

Quote from: Nichrome on 15-April-15, 23:35:12
Hmm I don't understand the issue. Are you trying to tell that current clocks are higher than advertised?
Yes. After the update my "default" clocks changed somehow.

UDP Nat Traversal Issue

Hey folks, have a 5505 with sec+ behind some public IP's for an Avaya remote VoIP SIP application on Android/iOS mobile. No SBC at current time and trying to get the app through a 5505 for both UDP/RTP and TCP (presence, chat, etc). All TCP ports seem to be following the NAT translation just fine, but my RTP streams are having an issue (no audio in either direction). All TCP traffic for the same mobile voip application is working just great via NAT (this traffic goes to an internal server with an object in the ASA titled UC-Server). Ironically, Avaya video conferencing and the same style of NAT also works just fine for RTP via NAT.
The voip app guide says 54000-54500 for the RTP stream and that this should be forwarded internally to the IP phone system (IP-Office is our object in the ASA) when hitting the public IP dedicated to external VoIP (object of UC-Public). I have attached a wireshark of the outside interface (inbound & outbound traffic) of the RTP traffic on the 5505. I also have a screenshot of the nat rule on the GUI side and CLI side.
Here's the kicker, we created a NAT rule identical to the 54000-54500 rule but with the other side of the conversation (9578 on this call example) and audio was perfect in both directions. However, we noticed that depending on how the remote voip client is connected to the internet (whether on 4g or wifi, etc) the other side of the port range (not the 54000-54500) can change by a large margin. I really don't want to just snag all possible ports moving in the other direction as they change dynamically and by a wide range.
I am not sure why the existing NAT statement is not working and the return traffic wont just follow the open socket?

I am still confused on why creating the "client side" nat rule would cause any effect on this scenario? The ASA should be seeing the return port traffic on the 54000-54500 range. When comparing other wireshark traffic to this, the flow is setup proper and the port direction wireshark shows is proper as well.
Thoughts?

Time Warner Cable wideband broadband slowness issues with Motorola sbg6580 router

I recently purchased Time Warner Wideband broadband cable for Internet service. 50 Megabit down and 5 Megabit up. When I run the speedtests, I can see the full speed measure, but I stil see issues with browsing and getting connected to VPN.
I had Time Warner Cable come out and replace the router. I still had the same issues after the replacement of the SBG6580 router. There are no updates to the firmware on this router.
I consistently see slow web page loads and problems while on VPN. I found posts on the web saying that this router's firewall was not compatible with Apple's computer products. Even with this firewall turned off inside the router, I still had the same slowness and misc issues.
I finally just changed the router into a gateway using the Rg Passthrough (which automatically turned off the NATP). I added the Time Capsule's MAC ID to the bypass section on the Router. I set up my Time Capsule to act as the main router with a cable running from the Motorola router to the Time Capsule WAN port.
The web pages and VPN are extremely faster. So the root cause is with the Motorola SBG6580 router obviously. I always got the full speed on the Speedtest.net web site, but now everything works fine with this change.

Dude. You are awesome! I am SOOOOOOOOOOOOOO glad you posted this solution. The fact that you took the time to post even AFTER you figured out a solution shows how thoughtful you are as an individual.
Its amazing to me that someone would comment adversely becuase they feel its in the wrong forum. If it affected their life as it does mine then they would get it. Amazing how people cant see past themselves. Who cares what forum its in if its informative? Worse case just move it to a different forum. We need more people like you and less like them in the world.
Thanks Im gonna try the solution right now!

My online gaming issues

I got a Linksys WRT310N wireless router about 14 months ago. My computer, modem and router are upstairs and my TV, PS3 and Xbox 360 are downstairs. Everything was working fine until late February. One Sunday I couldn't get online with my Xbox. I figured it was just an issue at the moment with Live, but the following weekend I couldn't get online on Saturday or Sunday and it just kept getting worse in the weeks to follow.
During the time the PS Network was down I found I was able to get online with my 360 by jumping on other people's networks in my area that didn't need a password. The connection wasn't always great but at least it was something.
When the PS Network came back up I got serious about getting everything straightened out so I tried changing a bunch of settings on my router. All of the common suggestions: static IPs for consoles, port forwarding, etc. I was able to get on both consoles with my own network again, but it was way too slow to do anything. Images/icons wouldn't load and I couldn't download anything. Then last Saturday I tried adding my PS3 MAC address to the MAC filtering on my router's configuration page. After, I went to see if that did anything. I tried to download a Netflix update that I couldn't even come close to downloading before and it downloaded in like 5 seconds. So then I put my Xbox MAC address in too and Xbox Live worked great after. So it looked like my problem was solved.
The following morning I turned on the computer to go online and my connection speed showed that it had limited or no connectivity. I unplugged my modem and router, waited a bit, and plugged them back in, but it didn't solve anything. So I decided to just leave it alone for a while, thinking it might just be an issue with Time Warner for the moment. I went back 2 hours later and nothing had changed. It said the network did not assign a network address to the computer. I decided to give Time Warner a call.
After I told the woman I was speaking with that I already tried unplugging my router and modem she suggested I reset my router. I really did not want to do this as I had already spent so much time with it trying to get my gaming straightened out and I didn't want to lose the settings that were working for me the previous day. But it didn't really seem I had a choice and I was pretty sure I remembered all of the settings changes I made. So I reset the router and my internet connection for the computer was back.
So I went back in my router and made all of the changes for my gaming again and went to try both consoles. Both could get online but images/icons take forever to load again so I can't really do anything online and a few days later my computer was back to the "limited or no connectivity." I've reset my router countless times and tried changes in the settings but I still can't get anything to work for my consoles again. When I check my PS3 connection the signal strength is 95-100% but when I run the connection test it always fails when it gets to upload and download connection speeds. What are my options at this point? It is very frustrating.

Everything looks good, except I'm not sure why your PC lists the dns servers as 192.168.1.1. The only time I see a pc list the dns servers as the router's ip are when someone has loaded dd-wrt onto their router and when they have selected dns masq. But you're still able to surf the web so I wouldn't worry about it. Since you have cable, all you should've had to do was select dhcp as the internet connection type and turned on upnp. Could you run ICET on internet explorer and see if you get any errors.
PS: IF you still can, edit out your default gateway that you posted under status page. You usually want to keep that private.
I don't work for Cisco. I'm just here to help.

NAT/Gaming issue on Motorola NVG510

Similar Messages

Maybe you are looking for