Navigation when reviewing a quiz

Hello,
I have created a quiz in Captivate 3, and enabled the review
functionality in Captivate. Upon completing the quiz, on the score
page is the the option to review the quiz. Upon pressing this, it
goes to the first question properly and displays everything
properly. My issue is not being able to go on to the next question.
The only button I am using in this quiz is the submit button. This
button does appear on the review screen, but is not active. I don't
see any means of editing only the review screens, like adding
buttons to just these slides. I have a feeling its right infront of
me, but after a couple hours of hunting and reading, I figured I'd
throw the question out there.

Hi,
In order to move forward in the review screens, you must have
'show skip button' selected in the quiz slide options, which will
display a skip button on each question slide.
And in the Quiz settings, select 'Allow user to review quiz'.
You cannot have a button, just on the review screens, as they
are, in effect, one of the same, with the review view simply
showing the correct answer / incorrect selection.

Similar Messages

  • Backwards Navigation When Reviewing Quiz Questions

    I have discovered from some students that they can cheat on my quiz. They take the quiz, review their answers and make note of the correct answers, then either drag the navigation slider backwards or click the Back button to return to the beginning of the quiz. This resets their original answers and allows them to retake the quiz with the answers they took from their notes.
    The quiz is set up to allow multiple attempts, but I assume they should be starting over with each attempt. My quiz questions are randomized from a test pool, so hopefully they do not see the same questions again and not in the same order. However, by cheating in this way, they can take the same questions in the same order.
    Is there anyway to limit backwards movement when reviewing the quiz?
    I have turned off backwards movement while they are taking the quiz, but this setting is turned off when they start reviewing the quiz.
    I am using Captivate 5.

    Thanks for the information. Yes I have set the quiz up to allow users to review their answers. Yes I assume they will take notes on the answers, but I have not enabled the Retake Quiz button. Once they get to the results page and choose to review their answers, I assumed (incorrectly) that their answers would be locked and they would not be able to change the answers or results for their attempt.
    My instructions tell them to relaunch the training, go through it again, and then take the quiz again. With the questions and answers being randomized, I was hoping that their notes (question 1 answer is B - question 2 answer is C - etc.) would not be very helpful to them and they would put effort into taking notes from the training to help them on the test instead.
    You said the following:
    "If a user clicks the Review Quiz button after any attempt, they will be unable to perform a new attempt on that quiz until they relaunch the lesson again.  Also, if the user jumps outside the Quiz Scope by navigating back to any slide before the first scored object or quiz question, they will be unable to reattempt the quiz until relaunch."
    I have tested this out, launching the training from the LMS, and it is not correct. I can go through the quiz, review my results, drag the slider or click the back button to the beginning of the quiz, and take the quiz again.
    I have disabled backwards movement during the quiz, but once you start reviewing a quiz, backwards movement is once again enabled via the slider or back button.
    I can hide the playbar and navigation controls, but when you get to the review, the navigation controls remain hidden and you cannot advance through the questions to see the results. I thought of adding a separate Forward button on the quiz question slides to allow the user to go forward as they review the slides, but you cannot add buttons or clickboxes to question slides.
    I could certainly turn off the review functionality, but I think it is valuable information to the student. I need to allow them to retake the quiz, as my boss has set a very high bar (100% passing score) on the quiz.
    Does anyone have any other ideas?
    By the way, after typing up this response, I started doing some playing around, and I figured out a fix. I turn off the navigation controls before the quiz and enable the Skip button on each question slide. With the navigation off, the user can answer the questions and click Submit. Then when reviewing the answers, they can navigate forward by clicking Skip. They can no longer navigate backwards through the quiz and training material.

  • Showing bespoke feedback when user reviews the quiz

    I've created a quiz with question pools and random question slides and also enabled the user to review the quiz when they've finished.  When they review, I want information to be shown about each question - not necessarily if they got it right or wrong - just some general notes about that particular question.  I'm sure I saw a video where Dr Pooja showed pictures on certain questions when the user reviewed the quiz.  Would I need to do this using advanced actions?  I'm using V6.0.1  Thanks

    Are you sure Pooja was not using Drag&Drop or normal questions, not random questions? It is pretty easy for both of them. But once you are talking about question pools and random question slides: how will you define what the picture needs to be, since you don't know which slide will be selected (you can use advanced actions on the random slide).
    Lilybiri

  • Problems with navigation when deploy application on WebLogic 10.3

    Hi! I have problems with navigation when I deploy my application on Weblogic server 10.3. In my application I have two pages. One page where I can see the records. In this page I have button Create with action to secound jspx page. When I press this button then the first form (where I could see all records) is empty - the create operation worked, but navigation to second page not. Navigation rules is in adf task flow. In default server all works correct. Where is the problem?
    Maybe when I deploy my application I need specialy deploy adf task flow or somewhere write something? If so, then can you explain me where? Any suggestions what to do.
    Best regards!

    I have in log:
    2009.26.3 20:12:52 oracle.adfinternal.controller.faces.lifecycle.JSFLifecycleImp
    l setLifecycleContextBuilder
    WARNING: ADFc: Replacing the ADF Page Lifecycle implementation with 'oracle.adfi
    nternal.controller.application.model.JSFDataBindingLifecycleContextBuilder'.
    2009.26.3 20:12:52 oracle.adfinternal.controller.util.model.AdfmInterface initia
    lize
    INFO: ADFc: BindingContext is present, using ADFm APIs for DataControlFrames.
    2009.26.3 20:12:52 oracle.adfinternal.controller.metadata.provider.MdsMetadataRe
    sourceProvider <init>
    INFO: ADFc: Controller caching of MDS metadata resources ENABLED.
    2009.26.3 20:12:52 oracle.adf.controller.internal.metadata.MetadataService$Boots
    trap add
    INFO: ADFc: Loading bootstrap metadata from '/WEB-INF/adfc-config.xml'.
    2009.26.3 20:12:54 oracle.adf.share.security.providers.jps.CSFCredentialStore fe
    tchCredential
    WARNING: Unable to locate the credential for key AUGI in D:\bea\user_projects\do
    mains\base_domain\config\oracle.
    2009.26.3 20:12:54 oracle.adf.share.jndi.ReferenceStoreHelper throwPartialResult
    Exception
    WARNING: Incomplete connection information
    Edited by: Debuger on Mar 26, 2009 11:18 AM

  • Although photo appears beautiful on phone screen, when reviewed in gallery, half the picture has a large line going through it.  Any ideas?  I went to VZN and they replaced my first new phone 3 days ago for this same issue.

    Although photo appears beautiful on phone screen, when reviewed in gallery, half the picture has a large line going through it.  Any ideas?  I went to VZN and they replaced my first new phone 3 days ago for this same issue.

        I'm sorry your pictures appear different in your gallery sillyymom. I know its frustrating with viewing important images. Are you using a 3rd party picture application? do you have any apps that may be conflicting with your pictures. Have you tried to review your picture settings?
    KinquanaH_VZW
    Follow us on Twitter @vzwsupport

  • We found that your app exhibited one or more bugs, when reviewed on iPad running iOS 7, on both Wi-Fi and cellular networks

    We found that your app exhibited one or more bugs, when reviewed on iPad running iOS 7, on both Wi-Fi and cellular networks

    1.) Wrong forum
    2.) no concrete informations. Review did supply you with concrete details.

  • HI, I would like to use GPS with I Pad for navigation when I am trekking.  I will need to download maps in order to do this.  Can anyone tell me which I Pad is the one to purchase?  Thanks, Dave

    HI,
    I would like to use an I Pad for navigating when I am trekking in the UK and in Europe.  I would also like to download local maps.
    Does anyone know which I Pad will support GPS Navigation?
    Thanks
    Dave

    Wi-Fi only iPads do not have the GPS chip and rely on inaccurate methods to determine location. So a cellular iPad is a must even if you do not set up a cellular data account.
    Also downloaded maps take up space on the iPad. So I would suggest that you consider an iPad with storage greater that the base model.

  • Reviewing the quiz

    Hi all,
    I'm in need of some help again.
    I have created a quiz with an 80% pass mark for my learners.
    This is no problem and it all works fine.
    Some feedback I have received through testing is that the learners would like to know the correct answer to the questions they got wrong, ordinarily not a problem, however.....
    If my learners get <80% they do the quiz again (by hiding the Continue button beneath the Retake Quiz button)
    If they get >80% then they have passed the quiz and the continue button appears so they can go to the next chapter.
    This is where the issue appears as the learners have stated they would like to know the answers to the questions they got wrong.
    I've tried changing the quiz properties so that they have 3 chances to complete the quiz before reviewing it, but I cannot stop the review button from appearing on the first failed attempt, giving them the answers rather than forcing them to have another go as both the "Review Quiz" and the "Retake Quiz" button appear.
    Is there a way of stopping the Review Quiz button from appearing until I want it to?
    I look forward to your answers as my deadline is fast approaching!

    I suggest you hide the Review Quiz button underneath the Retake Quiz button, not under the Continue button.
    Once the user hits the Review Quiz button, they won't have the option afterwards to do a Retake Quiz until they relaunch the lesson again.
    So by giving the user 3 attempts at the quiz, each time they fail, they'll only see the Retake Quiz button if it's sitting on top of the Review Quiz button. After their third failed attempt, or after their first Successful attempt (whichever comes first) they'll see the Review Quiz button.
    I agree that learners should not be given the opportunity to just review the quiz, find out the answers, and then retake the quiz straight away again.  But essentially, even with the precautions mentioned above, that's pretty much what they are doing if they Review the quiz and then relaunch the lesson.
    For more sophisticated options to control user attempts, you may need to use an LMS.

  • Iphoto, navigating:  when navigating my iphoto library is there a short cut or hotkey that will take the cursor to the last photo (bottom of the library)?

    iphoto, navigating:  when navigating my iphoto library is there a short cut or hotkey that will take the cursor to the last photo (bottom of the library)?

    A list of all iPhoto '11 shortcuts is here:
    Apple - Support - iPhoto - Keyboard Shortcuts
    I don't know of any keyboard shortcut to jump to the last photo, but if you option click the end of the scrollbar in the film strip you will jump to the last photo in the film strip.
    Regards
    Léonie

  • Why do map apps lose voice on navigation when plugged into USB port in cars?

    why do map apps lose voice on navigation when plugged into USB port in cars?

    Hello attempt
    We've see your issue in another 2 posts. Let's focus on 1 post only so others will easily help you.
    Thanks.
    • Click Likes to appreciate those who helps you
    • If your issue solved, mark the best post in your thread as Solution

  • HT201272 When reviewing my iTunes purchased playlist, how can I identify those track with DRM restrictions?

    When reviewing my iTunes Purchased Playlist, how do I identify tracks which have DRM restrictions?

    Perhaps you should Contact the iTunes Store Customer Service:
    Apple - Support - iTunes Store - Contact Us

  • Why can't Verizon stop charging me for Navigator when it has not been used?

    I have been going to your store in Bend, OR every month due to your failure to correct a charge for over a year. It is $9.99 for VZNavigator on xxx-xxx-xxxx. I would like written proof of these charges & usage because when I take action, I would like to show the total overcharge. I have the Share Everything Plan & have been with Verizon when it was AirTouch and now I am wondering how many other charges have been slipped into my bill. I would like a rapid response as I have been waiting patiently for many months without resolve.
    >> Personal information removed to comply with the Verizon Wireless Terms of Service <<
    Message was edited by: Verizon Moderator

    Verizon Wireless Customer Support wrote:
        Having unexpected charges on your bill is never a good thing hd4ever. If you have access to My Verizon online, you may view account charges for the past 12 months. I understand you have been billed for a VZ Navigator subscription. Which make and model phone are you using? With certain model devices, it is required that you uninstall the application from the phone itself. To view a detailed bill of charges online via My Verizon click http://bit.ly/xB4iTc
    In addition, it is recommended that you take your personal account information from the public forum. If you would like for us to review your account. Simply follow us and send us a direct message.
    Thank You,
    MichelleL_VZW
    VZW Support
    Follow us on Twitter @VZWSUPPORT
    michelleh_vzw
    The personal information was already removed from the post by the Moderators. I really wish your system to view questions always reflected the most current version of the post instead of the original message that went into the system. Can the Community Managers vzw_cm improve this? Also you forgot to include a link to your individual username (I hope I found the right one.) and the document link to the directions for Direct Messages. See How To: Direct Message

  • Navigating away from a quiz

    In the course I am creating I have quiz questions to test understanding that I am not scoring.  At the end of the course I have quiz questions that will be scored for a final grade.  Here is a problem that I am facing.  You start the first of two quiz questions, you answer the first, correctly or incorrectly it does not matter.  On the 2nd quiz question you navigate away from the quiz to reference the course for the answer.  When you come back to the quiz I can no longer answer the question or any questions in the rest of the course.  What am I doing wrong here?

    I will ask this question another way:
    I have 4 modules in a course.  I present content in module one and I pose 2 quiz questions that are not graded, just testing understanding and keeping the student engaged and give feedback using the quiz tool (Correct, Incorrect).  I present content in module two and pose more quiz questions again part of the final grade.  This patterns continues until the end of the course where I have several quiz questions that are given point totals and graded for a final grade.  The problem I have is that when the student starts the quiz all is fine until the student navigates back or forward in the course other than slide by slide one after the other.  When the student navigates away either using TOC or the playbar, the course thinks the quiz has ended and does not allow for the student to take anymore quiz questions.  I do want to have TOC available for course navigation.  This course will be launched from an LMS.
    Has anyone else created a course like this?  Can this be done another way?

  • Issue with broken navigation when implementing a SSO filter

    Hello
    I'm facing an issue when integrating the Jasig CAS SSO with Siebel Self-Service (which is an Oracle ADF application). When applying the CAS Authentication Filters, the navigation rules and page flows in the Self-Service application cease to work.
    The Siebel Self-Service application is using adfFaces filter, adfBindings filter and the SelfServiceFilter as controllers for the pages.
    For the integration with the Jasig CAS, a client lib is installed in the Self-Service OC4J. This CAS Client provides an "Authentication Filter" that is defined in the web.xml. The pages in Self-Service that are to be protected by this authentication filter (the pages that needs user authentication in order to be accessed) are also mapped in the web.xml. This authentication filter checks the user against the CAS Server and sends back a ticket parameter with the URL if the user is logged in. This parameter is used to validate the login attempt, and on successful validation, the CAS server provides the username of the user to a bean called by the SelfServiceFilter in the Self-Service app.
    My problem is that any JSF navigation on a page (navigation rules and page flows) cease to work as soon as a page is protected by the Authentication filter. One example would be during the check out process (which consists of several steps - several jspx pages). When you click “Next” on the first check out step, you are not redirected to step no 2, but to the same check out page as you started on.
    Since the Authentication Filter protects all the pages involved, it will intercept any request to these pages, fetch the request URL, redirect to the CAS server for user authentication, and on successful authentication it will redirect the user back to the URL that was fetched by the Authentication Filter in the first place.
    I have been looking into this, and I think that the JSF navigation rules etc, cease to work because the JSF page flows are being interrupted. When clicking “next” the page would normally post information to the life cycle of the requested page (which in some cases in this app, is also a postback to the same page). This information is then used when going through the life cycle of the new page. But when the CAS Authentication Filter intercepts the request, send the user to the CAS server and then redirect back to the page, this page life cycle is interrupted, or the necessary data is not attached in this “new” request.
    Does anyone have an idea for how I can solve this issue?
    Thanks!
    Jonte

    Hi,
    JSF pages use a postback navigation model. The filter works as expected but performs a redirect to the request page, which in the case of postback is the current page you see. To change this, you need to change the navigation cases to perform "redirect" navigation itself. Its ot an ADF Faces problem but default JSF behavior
    Frank

  • Can't find services in the Detailed Navigation when open from Overview page

    Hi,
    We have developed a custom area page for our ESS application. The area is visible in the Overview page as well as in TLN (Top leavel navigation). When we open the area from TLN the services under this area are visible in the Detailed Navigation(DN) on the left. But when we are trying to open the area from the overview page we can't be able to see the services in the DN and we have realized that the focus is on "Overview" in the TLN. In DN also only the Overview link is coming. But for other standard ESS applications the focus in the TLN is changing.
    Please help to find the solution.
    Thanks,
    Sekhar

    Hi Sekhar,
    Did you get any solution for this issue. I am facing the same situation.Please advise.
    Thanks,
    -Ashwani

Maybe you are looking for