Need assistance on multiple errors

Hi everyone,
I have trouble compiling my Java program due to some errors shown below and would like to seek your help:
1) I have a couple of these error:
Enumeration enum = objectsMoved.elements();
Error msg: "Enumeration cannot be resolved"
Is ii because I am missing out on some Java packages or libraries?
2) import java_cup.runtime.Symbol;
Error msg: "The import *java_cup* cannot be resolved"
Where can I obtain this package?
3) The import junit cannot be resolved
Error msg :" The import *junit* cannot be resolved"
Where can I obtain this package?
4) getContentPane().add(aboutLabel, new com.symantec.itools.awt.GridBagConstraintsD(0,0,3,1,1.0,1.0,java.awt.GridBagConstraints.CENTER,java.awt.GridBagConstraints.BOTH,new Insets(0,0,0,0),0,0));
Error msg: "*com.symantec* cannot be resolved to a type"
5) import edu.umd.cs.jazz.*;
import edu.umd.cs.jazz.component.*;
import edu.umd.cs.jazz.event.*;
import edu.umd.cs.jazz.util.*;
Error msg: "The import edu cannot be resolved"
Where can I find the edu import? Or is it that I have to connect to a CVS repository?
6) public MessageFactory() {
     this(Platform.defaultPlatform);
Error msg: "Platform cannot be resolved"
Sincerely looking forward to your favorable assistance. Thank you!
Best regards,
U-Wei

1) I have a couple of these error:
Enumeration enum = objectsMoved.elements();
Error msg: "Enumeration cannot be resolved"import java.util.*;
2) import java_cup.runtime.Symbol;
Error msg: "The import *java_cup* cannot be resolved"
Where can I obtain this package?Don't know. Where did you get the idea you needed it? Check there.
3) The import junit cannot be resolved
Error msg :" The import *junit* cannot be resolved"
Where can I obtain this package?http://www.junit.org/
4) getContentPane().add(aboutLabel, new com.symantec.itools.awt.GridBagConstraintsD(0,0,3,1,1.0,1.0,java.awt.GridBagConstraints.CENTER,java.awt.GridBagConstraints.BOTH,new Insets(0,0,0,0),0,0));
Error msg: "*com.symantec* cannot be resolved to a type"You'll need to add the com.symantec libraries to your compile-time classpath.
5) import edu.umd.cs.jazz.*;
import edu.umd.cs.jazz.component.*;
import edu.umd.cs.jazz.event.*;
import edu.umd.cs.jazz.util.*;
Error msg: "The import edu cannot be resolved"
Where can I find the edu import? Or is it that I have to connect to a CVS repository?Check with the University of Maryland: http://www.umd.edu/
6) public MessageFactory() {
     this(Platform.defaultPlatform);
Error msg: "Platform cannot be resolved"The Platform class is not on the classpath.
Sincerely looking forward to your favorable assistance. Thank you!Start here:
http://java.sun.com/docs/books/tutorial/getStarted/cupojava/index.html
http://java.sun.com/docs/books/tutorial/java/index.html
Good luck!
~

Similar Messages

  • Need to generate multiple error files with rule file names during parallel data load

    Hi,
    Is there a way that MAXL could generate multiple error files during parallel data load?
    import database AsoSamp.Sample data
      connect as TBC identified by 'password'
      using multiple rules_file 'rule1' , 'rule2'
      to load_buffer_block starting with buffer_id 100
      on error write to "error.txt";
    I want to get error files as this -  rule1.err, rule2.err (Error files with rule file name included). Is this possible in MAXL? 
    I even faced a situation , If i hard code the error file name like above, its giving me error file names as error1.err and error2.err. Is there any solution for this?
    Thanks,
    DS

    Are you saying that if you specify the error file as "error.txt" Essbase actually produces multiple error files and appends a number?
    Tim. 
    Yes its appending the way i said.
    Out of interest, though - why do you want to do this?  The load rules must be set up to select different 'chunks' of input data; is it impossible to tell which rule an error record came from if they are all in the same file?
    I have like 6 - 7 rule files using which the data will be pulled from SQL and loaded into Essbase. I dont say its impossible to track the error record.
    Regardless, the only way I can think of to have total control of the error file name is to use the 'manual' parallel load approach.  Set up a script to call multiple instances of MaxL, each performing a single load to a different buffer.  Then commit them all together.  This gives you most of the parallel load benefit, albeit with more complex scripting.
    Even i had the same thought of calling multiple instances of a Maxl using a shell script.  Could you please elaborate on this process? What sort of complexity is involved in this approach.? Did anyone tried it before?
    Thanks,
    DS

  • Need assistance with multiple issues with several G5's

    Hello All,
    I need to get some assistance with some issues that I am having with several G5 Dual’s
    I just started a new position and I have 4-G5 Dual’s that are in various states of disrepair. Normally I would call Apple support but they did not purchase the extended AppleCare packages for any of the G5’s theu purchased and they are ALL over a year old now. Any suggestions would be greatly appreciated.
    G5 number 1 - Has its fans running at full output all the time. Could this be a firmware issue?
    G5 number 2 – Had it’s logic board replaced by one of our company computer techs and now at start up gives a long tone then boots to white screen with a command prompt. Requiring me to either type “mac-boot” or “shutdown”. If I continue the boot process the machine just goes to a gray screen and stalls. I researched this yesterday and tried several solutions I found here but to no avail. Seems to me that past of the issue is that it is stuck looking for a firmware upgrade. How do I get past it?
    G5 number 3 – Mac seems to boot correctly but when you click on the Apple icon in the upper left hand corner the Finder blinks out and then comes back. It does this every time we try to go to the Apple menu. We removed the original hard drive and installed in a known good drive, our tech drive with a G5 image, rebooted the mac and the same issue occurs with the Finder.
    G5 number 4 – This unit boots to black screen with a Unix command prompt displaying “root#”. Any thoughts.
    Thanks
    Paul
    G5 Dual   Mac OS X (10.3.9)  
    G5 Dual   Mac OS X (10.3.9)  

    Apparantly someone not certified to repair them messed them up.
    Tell bossman it would be in his best interest for you to take them to a authorized Apple Repair and get it done with.
    Tell him that Mac's rarley screw up hardware wise and there really hasn't been a great demand for skilled repair techs outside of Apple.
    If your worried about your job, tell him you can take care of the software, training, minor hardware and networking end of the matter. Which, luckily for you, are longtern and ongoing needs. You can tell him that.
    There's nothing wrong in admitting you don't know how to do something and keeping your job, than to be unable to fix them and lose your job.

  • Need assistance with CSS error or incorrect

    Hi - hope someone can help me.  I'm setting up a mega menu in Dreamweaver and then will export the code to WordPress.  First, to get everything working, here is the menu in HTML; I basically just set it all up in DW to get it to work:
    http://designerandpublisher.com/megamenu/2/index7.html
    I then went into the back end of the WordPress site and pasted the menu code in it.  The end result wasn't working so I got rid of the "th, a" in the #mainmenubar CSS code and when I did so, it's fine but the color of the menu text is green.  I need to make that text and only that text white.  Here is a screenshot (I can't show you the actual site because it's restricted):
    So I need to make the text links in the bar white.  I know it has to be some kind of class I have to make of the #mainmenubar and I've read up on it but just can't figure out how to write it to make it work.  Here is the CSS for the menu bar:
    #mainmenubar
        color:  #FFFFFF;
      text-decoration:  none;
      border: 0px solid #a1a1a1;
      height: 40px;
      background-image: url("http://gulfspilldemo.imsg.com/wp-content/uploads/blackgradient.jpg");
        background-repeat: repeat-x;
      border-radius: 10px 10px 10px 10px;
    Any help is appreciated.  Thanks - Deaf Guy

    Hi - thanks for your replies.  That's what I'm doing - adding custom CSS for the #mainmenubar but I can't figure out how to specifically tell the CSS to change the linked text to white.  I'm basically hacking into the back end of the WP site because the theme they set up for the site 4 years ago is so highly customized that you cannot just plug in a mega menu plugin.  Dreamweaver is a big big help for me in doing this because it allows me to test out the code and so forth.
    Here is the full CSS of the site.  My #mainmenubar code is not in that file yet but in the <head> while I'm testing it. Once I get it to work, I plan to add it to the main CSS file below:
    http://www.gulfspillrestoration.noaa.gov/wp-content/themes/organic_theme_ocean/style.css
    Thank you for your assistance and hope you can help.

  • Need assistance with server error

    In reviewing the system error log I am finding repeated statements similar to this one. Can anyone identify what is creating the erro and how to resolve it?
    It should probably be noted that while I am seeing errors similar to this one, everything appears to be working correctly.
    *Feb 7 10:45:08 jthmac105 mds[55]: (Error) Server: Peer checkin failed -- no store for path '/Volumes/Public'*
    *Feb 7 10:45:08 jthmac105 com.apple.AppleFileServer[276]: MDSChannelPeerCreate: (os/kern) invalid argument*

    We have the same problem (XServe Intel 10.5.2 using AFP and iCalServer), this morning the server cannot be reached over AFP, iCal, Logging in on the server with the server Administrator AND root doesn´t works, neither with Apple remote desktop, so I have to restart the server. Does anybody has an idea what happens
    *06.03.08 17:59:07 mds[110] (Error) Server: Peer checkin failed -- no store for path '/Volumes/EasyRAID1/FREIGABEN/Fileserver' *
    *06.03.08 17:59:07 com.apple.AppleFileServer[249] MDSChannelPeerCreate: (os/kern) invalid argument *
    Later I have this error message on the Server:
    *06.03.08 18:10:06 servermgrd[106] servermgr_web: No default web services record. Group service settings will not be available*
    and this:
    **06.03.08 18:19:24 com.apple.launchd[1] (com.apple.launchd.peruser.93[63309]) getpwuid("93") failed **
    *06.03.08 18:19:24 com.apple.launchd[1] (com.apple.launchd.peruser.93[63309]) PID 223 "Python" has no account to back it! Real/effective/saved UIDs: 93/93/93*
    (this error message repeats every 10 seconds...)

  • HT6006 Need assistance with an error

    I purchased Netflix for someone else from my Apple TV. Apparently it used my billing information from my itunes and I want to cancel it. How do I go about doing that?

    You can unsubscribe through the iTunes Store on your computer. Open your account using Quicklinks on the right-hand side of the iTunes window. Subscriptions should be in the Settings section.

  • I am trying to setup Microsoft office mail and need assistance  - I am receiving the error, unable to find server and DNS setting in the Network

    I am trying to setup Microsoft office mail and need assistance  - I am receiving the error, unable to find server and DNS setting in the Network

    Which version of OSX and what email provider are you using.

  • I'm uploading a photobook I made to be published.  I need assistance in getting it to apple.  The book is assembled and gets to the end of uploading when I get an error message, an error occurred while uploading.  I have been trying all night.  Help!

    I'm uploading a photobook I made to be published.  I need assistance in getting it to apple.  The book is assembled and gets to the end of uploading when I get an error message, an error occurred while uploading.  I have been trying all night.  Help!

    Welcome to the Apple Community.
    I have seen previous versions mentioned in a pop up message before on iCloud.com, but I'm not really sure at all how it would help, as I couldn't get it to do anything.
    The best advice I have at this time is to back up your work on your iOS device by regularly saving it to iTunes, if anything goes wrong you can then either load it into the numbers app again on the device or recover it via iTunes on your computer.
    My syncs are immediate, I never get chance to see if it works in the background, sorry.

  • Need assistance with my Porsche Design LaCie Time Capsule... It is not operating at all.. I have ran the diagnostic via the Disk Utility and under the error reading it runs the repair and then says it not about to repair what do I do... Thanks

    Need assistance with my Porsche Design LaCie Time Capsule... It is not operating at all.. I have ran the diagnostic via the Disk Utility and under the error reading it runs the repair and then says it not about to repair what do I do... Thanks

    LaCie doesnt make ANYTHING.  It contains a Seagate 3.5" 5400RPM HD.
    Check the HD on another computer, if nothing, your SATA bridge is fried, or the HD (very unlikely since its a Seagate inside)
    Youd have to crack open the HD, remove the SATA bridge cart thats plugged into the HD and put the HD into an enclosure or a HD dock to get the data
    those external HD use a 50 cent SATA bridge famous for failing.  The curse of all the good HD externals is the junk 3rd party SATA bridges attached to them that crash and burn.
    Sata bridge:

  • IF_EX_ME_PROCESS_PO_CUST multiple error message in the CHECK

    Hi All
    i search a way for multiple error message in the CHECK Methode, because i check every line.
    INCLUDE MM_MESSAGES_MAC.
    ch_failed = 'X'.
    mmpur_message 'E'                                     "&1 sy-msgty
                  '00'                                    "&2 sy-msgid
                  '398'                                   "&3 sy-msgno
                  'Werk nicht in allen Positionen gleich' "&4 sy-msgv1
                  ''                                      "&5 sy-msgv2
                  ''                                      "&6 sy-msgv3
                  ''.                                     "&7 sy-msgv4
    Thanks

    Hi
    ME21N has also a Error Message BAPI for view Errors and i need multiple Messages on these step for each position

  • Handling Multiple Error Messages through EXIT_SAPMM06E_012 for ME28

    Dear Team,
                           After Executing ME28, system will give List of PO's that are to be Released . User will select Multiple  PO's and
    Press Release button in Application toolbar. once it is relased, User will press save Icon for all released PO's. 
    Once Save icon is presed, I need to  do  Validation for Multiple PO's in the user Exit EXIT_SAPMM06E_012 and capture my
    ErrorMessages for all Released PO's for which Validation fails.
    Here in the given user Exit, one PO will be processed at a time as PO is defined as Import Parameter but it will handle all PO's
    and give the output in status bar saying 'Relased Saved' for all PO's which succesfully gonethrough.
    once we execute ME28, system is showing list output with PO's to be Released(As system is handling with Write statments). In this case, we dont have scenario of PBO and PAI Modules( where user can correct error if any validation fails) like we have for ME22,etc.
    I have Written simpel Error Message in the  User Exit.
    once i tried to trigger my user exit  by Releasing and Saving with One PO, Error Message is displayed ( as information Message
    appears) and if i Press Exit button in Error Message, it is coming out of Transaction.
    Is there any Possibilty to Handle Multiple Error Messages ( in my case for  Valdiation Failed Po's)  in ME28 ,after Releasing and Saving , and also user should not come out of Transaction once  Error Messages are Displayed.
    Thanks and Regards
    Suresh

    Hi Suresh,
    there is a tekpo table to handle all po items. you can put it in loop and do validations.
    if any errors through, there may be a ex_messages table of type bapiret2.
    or
    try like this:  MESSAGE E368(00) WITH TEXT-001 TEXT-002.
    thanks
    srinu
    Edited by: srinu rao on Sep 22, 2009 3:43 AM

  • Capturing multiple errors

    I thought that the Merge Errors would show me multiple errors (if they occurred).  However, after reading more closely, I realized that Merge Errors will 'report the first error found'.  I have a situation where there are 2 and sometimes 3 possible sources of error that I'd like to funnel into one Error Out and display all three errors.  Is this possible, or do I have to have an Error Out for each Error in.

    Hi mrbean,
          If you're still open to ideas, here are a couple of VIs - one for Building an error, the other for Merging two errors.  They will encorporate new error-info while preserving "existing" error-cluster information (even if it's non-fatal).  In the (relatively) rare instances where multiple error-clusters need to be merged, I just cascade the "binary"-merge!  Of course this isn't designed to address arrays of errors!
    Cheers.
    "Inside every large program is a small program struggling to get out." (attributed to Tony Hoare)
    Attachments:
    Util.Error.Build.vi ‏48 KB
    Util.Error.Merge.vi ‏27 KB

  • Multiple Error Messages, starting With 500 null Error

    I've been experiencing multiple error messages with
    ColdFusion 7.0 on Ubuntu Linux/Apache2 for the past several days,
    starting with the 500 null error (see
    http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=f9e312a2),
    which ocurred on only part of the site (a set of forms requiring
    remote login). Now, the following errors are appearing on various
    CF forms: "An I/O error while manipulating the sort index" and "An
    exception occurred when setting up mail server parameters" and
    finally, "No space left on device." All these errors are occurring
    on add/edit forms and cffile upload forms that were working fine a
    few hours ago and that haven't been changed.
    Right now, I'm replacing the license.properties file to deal
    with the 500 null error. My question is, has anyone else
    experienced this smattering of other error messages in conjunction
    with the 500 null error? Or fast on the heels of it? What's the
    deal with the 500 null error, anyway? Has Adobe made any progress
    with this issue?

    Okay, this is a followup to my previous post (
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=143&threadid=1165765&en terthread=y).
    Replacing the license.properties file isn't sufficient in
    addressing the 500 null error. We are running Ubuntu Linux. I
    understand that I need to replace jvm 1.5 with jvm 1.4.2. I'm
    honestly not sure how to detect on Linux which version of jvm is
    running or how to make sure that version 1.4.2 is what is running
    when we reinstall ColdFusion. If someone could help me with this,
    I'd appreciate it. The 500 null error is eating my Web site like
    the Langoliers. Even some static .cfm pages are failing now.

  • When I install some drivers I get multiple error messages in CM15

    When I was upgrading Mozilla and a Bamboo writing pad I got multiple errors.
    Unable to write to system extension @
    "/System/Library/Extensions/CM15.
    Using a fully updated Intel Core Duo 2GHz.
    2 GB 667 MHz DDR2 SDRAM
    Software Version 10.6.7

    Neither product are Apple products, I'd suggest contacting the manufacturers of each product. Apple products normally do not need driver's downloaded like a Windows machine. You should see if the version of their products on your machine is the most-up-to-date for your configuration. If it is then the driver updates are not necessary however if they are not then you need to update the version of their software because any drivers will be incorporated in the latest version.

  • Multiple Errors While Attempting to Sync

    When I attempt to sync my 2nd generation iPod Touch (iOS 4) with my iTunes (v 9.2), I receive multiple errors: Can not copy song due to unknown error 0xE800400C, the device has timed out, and an internal device error occurred. I have tried just about everything, including:
    - Restoring the iPod
    - Uninstalling everything apple related and reinstalling iTunes
    - Paying $99 for a replacement iPod
    - Using a different USB device to hook it up
    - I don't use any fancy add-ons, so there aren't any to remove
    - Turned off my firewall
    I can't find any other advice to use. Help!!

    I wish I could be more specific on my answer, however I cannot find the original place that has the answer.
    I think the two main fixes for this is
    1: go to device manager and look under "universal serial bus controller"
    1a: look for two "USB Enhanced host controllers" (make sure it has enhanced)
    1b: if you only see one USB Enhanced host controller then move on to 2
    1c: if you DO have two of these, then be sure you have access to a mouse that you can connect that does NOT use USB, or a track pad (such as on a laptop)
    1d: disable one of the USB enhanced host controllers by right clicking it and hit disable, (this may cause and usb devices such as keyboards or a mouse to stop working)
    1e: try to sync your ipod.
    1f: if it fails enable that enhanced host controller and disable the other.
    1g: if it works either either of these configurations great, though you may run into some corrupted applications if you have transfered purchases in the past, these will need to be deleted and redownloaded.
    2. Update your bios, if you don't know how to do this you probably should not attempt it on your own. Perform any available windows updates, then call your computer manufacturer and ask them to help you do this.

Maybe you are looking for