Need Help - Custom Identity Assertor using MBenMaker known issue CR207766
I am facing below WL 9 knwon issue in WebLogic 10. How to resolve it , do I need to create constructor in identity Asserter IMPL classes ? If yes, what goes inside constructor. Pls help as there is no reference for this issue in WebLog release after WL 9. Below is as in WL 9 site at
http://edocs.bea.com/wls/docs90/issues/known_resolved.html
CR207766
The intermediate files that the WebLogic Server 9.0 BETA MBeanMaker generates erroneously includes two types of constructors for you to complete. One type is based on ModelMBean and the other type is based on RequiredModelMBean.
The constructors that are based on ModelMBean will no longer be generated or supported after this Beta release.
Workaround:
When using MBeanMaker to create MBeans for custom security providers, supply content only for the constructors that are based on RequiredModelMBean.
Not related to the issue. How do you build your project containing provider? Do you use workshop IDE build? Thanks
Similar Messages
-
I need help I tried to use cloud backup on my iPhone 5.0.1 and after all my camera roll pictures are blurry and videos canot be played messege says URL not on this server ! Please help!!
iPhone 4S, iOS 5.0.1Try updating to iOS 6.1.3.
-
Need help writing host program using LabView.
Need help writing host program using LabView.
Hello,
I'm designing a HID device, and I want to write a host program using National Instrument's LabView. NI doesn't have any software support for USB, so I'm trying to write a few C dll files and link them to Call Library Functions. NI has some documentation on how to do this, but it's not exactly easy reading.
I've written a few C console programs (running Win 2K) using the PC host software example for a HID device from John Hyde's book "USB by design", and they run ok. From Hyde's example program, I've written a few functions that use a few API functions each. This makes the main program more streamlined. The functions are; GetHIDPath, OpenHID, GetHIDInfo, Writ
eHID, ReadHIC, and CloseHID. As I mentioned, my main program runs well with these functions.
My strategy is to make dll files from these functions and load them into LabView Call Library Functions. However, I'm having a number of subtle problems in trying to do this. The big problem I'm having now are build errors when I try to build to a dll.
I'm writing this post for a few reasons. First, I'm wondering if there are any LabView programmers who have already written USB HID host programs, and if they could give me some advice. Or, I would be grateful if a LabView or Visual C programmer could help me work out the programming problems that I'm having with my current program. If I get this LabView program working I would be happy to share it. I'm also wondering if there might already be any USB IHD LabView that I could download.
Any help would be appreciated.
Regards, George
George Dorian
Sutter Instruments
51 Digital DR.
Novato, CA 94949
USA
[email protected]
m
(415) 883-0128
FAX (415) 883-0572George may not answer you. He hasn't been online here for almost eight years.
Jim
You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice -
I need help from chile and use a language translator to write and not turn my iphone4
I need help from chile and use a language translator to write and not turn my iphone4
http://support.apple.com/kb/TS3281
Not turn on -
Need help with premiere pro cs6 having performance issues please help
need help with premiere pro cs6 having performance issues please help
Welcome to the forum.
First thing that I would do would be to look at this Adobe KB Article to see if it helps.
Next, I would try the tips in this ARTICLE.
If that does not help, a Repair Install would definitely be in order.
Good luck,
Hunt -
Need help on Self Hosting Using channel Factory
Hello,
Need Help.
I am trying to self host WCF service using cutom Channel Factory class. but I am getting exception.
The scenario is something like below this : -
I want to create the endpoint connection to WCF service. I want to achieve this using custom channel factory(not using default channel factory API provided in .Net Framework).
I have written one class and it is derived from channel factory and we are reading the service endpoints, behaviors, bindings from external configuration file added in the project.
I am able to connect to server side service hosted on different machine using following sample code successfully.
In the case of “self-hosting” I am receiving following error : --
"There was an error reading from the pipe: The pipe has been ended. (109, 0x6d)."
Below is the code which I have written for self hosting WCF service using custom channel factory.
// Method where I am calling CustomChannel Factory constructor
internal void ProxyCall(string msgEndpointConfigurationName, string url)
string appConfigDirName, extConfigFilePath;
FileInfo configFileInfo = new FileInfo(appConfigName);
appConfigDirName = configFileInfo.DirectoryName;
extConfigFilePath = appConfigDirName + "\\" + extConfigFileName;
this.messageEndpointConfigurationName = msgEndpointConfigurationName;
if (string.IsNullOrEmpty(url))
this.messageFactory = new CustomChannelFactory<IServerOperationsMessage>(extConfigFilePath, this.messageEndpointConfigurationName);
else
//EndpointAddress e = new EndpointAddress(url + ClientToServerOperations.ServiceAddress);
//this.messageFactory = new ChannelFactory<IServerOperationsMessage>(this.messageEndpointConfigurationName, e);
this.messageFactory = new CustomSelfHostingChannelFactory<IServerOperationsMessage>(extConfigFilePath, this.messageEndpointConfigurationName, url + ClientToServerOperations.ServiceAddress);
//this.messageFactory = new CustomSelfHostingChannelFactory<IServerOperationsMessage>(extConfigFilePath, this.messageEndpointConfigurationName, e);
ClientMessageFormatterBehavior formatterBehavior = new ClientMessageFormatterBehavior();
foreach (OperationDescription operation in this.messageFactory.Endpoint.Contract.Operations)
if (!operation.Behaviors.Contains(typeof(ClientMessageFormatterBehavior)))
operation.Behaviors.Add(formatterBehavior);
this.messageFactory.Endpoint.Behaviors.Add(new MessageStatisticsBehavior());
this.messageFactory.Open();
// Custom Channel Factory Class
internal class CustomSelfHostingChannelFactory<T> : ChannelFactory<T>
/// Custom client channel. Allows to specify a different configuration file
/// <typeparam name="T"></typeparam>
private string configurationPath, selectedMsgEndPoint, uriAddress;
public PPCCustomSelfHostingChannelFactory(string configurationPath, string selectedEndPoint, string uriAddress)
: base(typeof(T))
this.configurationPath = configurationPath;
this.selectedMsgEndPoint = selectedEndPoint;
this.uriAddress = uriAddress;
EndpointAddress e = new EndpointAddress(this.uriAddress);
base.InitializeEndpoint(selectedEndPoint,e);
//As you can see, a call to the method InitialiazeEndpoint of the base class is required.
//That method will automatically call to our CreateDescription method to configure the service endpoint.
///Loads the serviceEndpoint description from the specified configuration file
protected override ServiceEndpoint CreateDescription()
ServiceEndpoint serviceEndpoint = base.CreateDescription();
return serviceEndpoint;
private EndpointIdentity GetIdentity(IdentityElement element)
EndpointIdentity identity = null;
PropertyInformationCollection properties = element.ElementInformation.Properties;
if (properties["userPrincipalName"].ValueOrigin != PropertyValueOrigin.Default)
return EndpointIdentity.CreateUpnIdentity(element.UserPrincipalName.Value);
if (properties["servicePrincipalName"].ValueOrigin != PropertyValueOrigin.Default)
return EndpointIdentity.CreateSpnIdentity(element.ServicePrincipalName.Value);
if (properties["dns"].ValueOrigin != PropertyValueOrigin.Default)
return EndpointIdentity.CreateDnsIdentity(element.Dns.Value);
if (properties["rsa"].ValueOrigin != PropertyValueOrigin.Default)
return EndpointIdentity.CreateRsaIdentity(element.Rsa.Value);
return identity;
private Binding GetBinding(IBindingConfigurationElement configurationElement)
if (configurationElement is CustomBindingElement) return new CustomBinding();
else if (configurationElement is BasicHttpBindingElement) return new BasicHttpBinding();
else if (configurationElement is NetMsmqBindingElement) return new NetMsmqBinding();
else if (configurationElement is NetNamedPipeBindingElement) return new NetNamedPipeBinding();
else if (configurationElement is NetPeerTcpBindingElement) return new NetPeerTcpBinding();
else if (configurationElement is NetTcpBindingElement) return new NetTcpBinding();
else if (configurationElement is WSDualHttpBindingElement) return new WSDualHttpBinding();
else if (configurationElement is WSHttpBindingElement) return new WSHttpBinding();
else if (configurationElement is WSFederationHttpBindingElement) return new WSFederationHttpBinding();
return null;
private Binding CreateBinding(string bindingName, ServiceModelSectionGroup group)
BindingCollectionElement bindingElementCollection = group.Bindings[bindingName];
if (bindingElementCollection.ConfiguredBindings.Count > 0)
IBindingConfigurationElement be = bindingElementCollection.ConfiguredBindings[0];
Binding binding = GetBinding(be);
if (be != null)
be.ApplyConfiguration(binding);
return binding;
return null;
private void AddBehaviors(string behaviorConfiguration, ServiceEndpoint serviceEndpoint, ServiceModelSectionGroup group)
EndpointBehaviorElement behaviorElement = group.Behaviors.EndpointBehaviors[behaviorConfiguration];
for (int i = 0; i < behaviorElement.Count; i++)
BehaviorExtensionElement behaviorExtension = behaviorElement[i];
object extension = behaviorExtension.GetType().InvokeMember("CreateBehavior", BindingFlags.InvokeMethod | BindingFlags.NonPublic | BindingFlags.Instance, null,
behaviorExtension, null);
if (extension != null)
serviceEndpoint.Behaviors.Add((IEndpointBehavior)extension);
Thanks in advance !! :-)Hi,
There was an error reading from the pipe: Unrecognized error 109 (0x6d).
One reason was inconsistent binding between client and server <netNamedPipeBinding> <security mode="None"></security>... (no
communication)
The other intermittent issue was time-out related.
For more information, you could refer to:
http://stackoverflow.com/questions/15836199/wcf-namedpipe-communicationexception-the-pipe-has-been-ended-109-0x6d
http://stackoverflow.com/questions/22334514/wcf-named-pipe-error-the-pipe-has-been-ended-109-0x6d
Regards -
Need help in english to use my iphone4 with orange.fr in france
I am travelling in France with my factory unlocked iphone4. England and Thailand services have been fine but Orange France is a nightmare. They say I can't get 3G on my iphone4 and there is no english speaking support to help me out. My network settings are turned off but my 20 euro credit has either dissappeared or never was there in the first place. Where can I get English support for this company?
Hello
The whole story is a little bit confusing for me. So lets see what you wrote:
>... thinking that it would fix it but it ended up erasing the whole of my computer even windows 7.
Thinking is wrong. What you need is exact info about recovery installation and this can be found in users manuals document. Recovery disc is not like Microsoft installation disc and cannot be used for repair. Recovery disc contains recovery image and can be used for clean OS installation (recovery image installation) only.
> So now I have a computer I can't use
Why you cannot use it? Recovery image installation installs OS again. Which OS is installed after running recovery image installation?
> I have also bought the product recovery disks from toshiba's backup media site
But why if you already have recovery disc that you have used at the beginning of the whole story?
What you need to do is to use this original disc for OS installation.
-start your notebook and press F12 several times to enter BOOT menu
-when the menu is shown put recovery disc into ODD
-select CD/DVD drive in the menu and press ENTER
-follow the menu on the screen
After recovery image installation you will have factory settings again and everything should be OK.
More questions? -
Need Help Understanding How To Use iMessage Between Two iPhones
I have an iPhone 4 and my wife an iPhone 3GS. We both have iOS 5, but I have discovered something about iMessage I need to make sure I understand correctly. As I understand it iMessage can send text even if our voice carrier service is unavailable. I tend to loose signal inside the building I work in. I usually can get texts in and out, but sometimes not. But in testing the two phones sending iMessages, I've noticed is that if I have one of the phones with iMessage turned on and the other with iMessage turned off, the two phones will not be able to exchange text. Is that how it's supposed to work? Even though one of these phones can receive an iMessage doesn't mean the other one send one back. Can't the system detect when one phone is connected and another one not, and the one that is not gets sent SMS messages instead? I don't want to try to send my wife an iMessage because I can't get a voice signal in my building, but her have iMessages turned off and not able to get any messages from me, iMessage or SMS. I guess I need help better understanding how this actually works between the two phones so I can always get texts back and forth between my wife and I. My other misgiving is that this iMessage thing consumes my data limit. My wife gets unlimited because she had her phone before the limits were imposed, but I got on board after, so I am hesitant to use iMessage all the time because of it. I have no intention to send picture mail through iMessage, but the thing is if I wanted to switch to SMS to send picture mail to save data, but my wife's phone is set to iMessage, she won't get it. If this is how this thing is supposed to work, I'm not really impressed. Some insight would be appreciated
I think you are making this way too complicated. Why are you turning iMessage off? If you are at your office connect to the WiFi there and send your wife messages that way (unless your office is blocking the port iMessage uses). When possible the two phones will use iMessage but will revert to SMS is iMessage is not available if that option is set that way.
I would not worry about using up your data plan if you have the 2GB, text iMessages are going to be very small and MMS (picture) ones are not very large either. Unless you are sending hundreds of picture iMessages a day you will have a hard time using up your data.
If you are near an Apple Store you should explore signing up for an intro iPhone course and have them run through iMessage options. -
Need help on how to use conference facility within adobe connect
I need some help on how to use conference facility within adobe connect?
I'd recommend you start here: Getting Started with Adobe Connect - Adobe Connect User Community
-
Need your help please. When using Safari while banking online- I cannot get rid of the Pop ups although I have ticked the correct place. Any ideas ?
A few months ago I downloaded a program someone suggested.Get Adblock or GlimmerBlocker.
-
Need Help with Identity Asserter and Authenticator
First I have build custom authentication provider and configured in Web logic without Assertion and deployed as MBean --
Then I build one Custom Identity Assertion separately and deployed on Web Logic with below configuration. Now my problem is that even though I pass TOKEN in header , but still weblogic prompts for username / password . Though it successfully prints Token on console inside Asserter.
Also I have set below in config.xml to avoid
<enforce-valid-basic-auth-credentials>false</enforce-valid-basic-auth-credentials>
Web.xml
<security-constraint>
<display-name></display-name>
<web-resource-collection>
<web-resource-name>anything</web-resource-name>
<url-pattern>/*</url-pattern>
<http-method>GET</http-method>
<http-method>PUT</http-method>
<http-method>HEAD</http-method>
<http-method>POST</http-method>
</web-resource-collection>
<auth-constraint>
<description>user </description>
<role-name>myuser</role-name>
</auth-constraint>
</security-constraint>
<login-config>
<auth-method>CLIENT-CERT</auth-method>
<realm-name>myrealm</realm-name>
</login-config>
<security-role>
<role-name>myuser</role-name>
</security-role>
where do I need to define myuser in weblogic admin console ?hello!
I've been trying to find a working example for creating
a custom Identity Assert...but the links to such resources in the old BEA
docs are now broken...
can you point me towards a source of working code examples
for an Identity Asserter?
thank you! -
Need help about ref cursor using like table
Hi Guys...
I am devloping package function And i need help about cursor
One of my function return sys_refcursor. And the return cursor need to be
join another table in database . I don't have to fetch all rows in cursor
All i need to join ref cursor and another table in sql clause
like below
select a.aa , b.cc form ( ref_cursor ) A, table B
where A.dd = B.dd
I appeciate it in advanceMy understanding is that you have a function that returns a refcursor and is called by a java app.
Because this is a commonly used bit of code, you also want to reuse this cursor in other bits of sql and so you want to include it like table in a bit of sql and join that refcursor to other tables.
It's not as easy as you might hope but you can probably achieve this with pipelined functions.
Is it a direction that code should be going down? yes, eventually. I like the idea of pulling commonly used bits of code into a SQL statement especially into the WITH section, provided it could be used efficiently by the CBO.
Is it worth the effort given what you have to do currently to implement it? possibly not.
what else could you do? construct the sql statement independently of the thing that used it and reuse that sql statement rather than the refcursor it returns?
Message was edited by:
dombrooks -
I am Stuck! Need Help With Multicast Streaming Using VLC Player
I have a Multicast network topology shown below
and my configs
HUB ROUTER
no ip domain lookup
ip domain name primestarhotel.com
ip multicast-routing
interface Loopback0
ip address 5.5.5.5 255.255.255.255
ip pim sparse-dense-mode
interface FastEthernet0/0
ip address 200.0.0.2 255.255.255.240
ip pim sparse-dense-mode
ip virtual-reassembly
speed 100
full-duplex
interface FastEthernet0/1.65
description "Server Vlan"
encapsulation dot1Q 65
ip address 10.1.65.1 255.255.255.0
ip pim sparse-dense-mode
ip virtual-reassembly
router ospf 200
log-adjacency-changes
network 5.5.5.5 0.0.0.0 area 0
network 10.1.65.0 0.0.0.255 area 0
network 200.0.0.0 0.0.0.15 area 0
ip route 200.1.1.0 255.255.255.252 200.0.0.1
ip route 200.2.2.0 255.255.255.252 200.0.0.1
no ip http server
no ip http secure-server
ip pim send-rp-announce Loopback0 scope 6
ip pim send-rp-discovery Loopback0 scope 6
ISP ROUTER
interface FastEthernet1/0
interface FastEthernet1/1
no switchport
ip address 200.0.0.1 255.255.255.240
ip pim sparse-dense-mode
duplex full
speed 100
interface FastEthernet1/2
no switchport
ip address 200.1.1.1 255.255.255.252
ip pim sparse-dense-mode
duplex full
speed 100
interface FastEthernet1/3
no switchport
ip address 200.2.2.1 255.255.255.252
ip pim sparse-dense-mode
duplex full
speed 100
router ospf 200
log-adjacency-changes
network 200.0.0.0 0.0.0.15 area 0
network 200.1.1.0 0.0.0.3 area 0
network 200.2.2.0 0.0.0.3 area 0
SPOKE 1 Router
interface FastEthernet0/0
ip address 200.1.1.2 255.255.255.252
ip pim sparse-dense-mode
speed 100
full-duplex
interface FastEthernet0/1
no ip address
ip pim sparse-dense-mode
ip virtual-reassembly
speed 100
full-duplex
interface FastEthernet0/1.12
description "Workstation pc"
encapsulation dot1Q 12
ip address 10.1.12.1 255.255.255.0
ip pim sparse-dense-mode
router ospf 200
log-adjacency-changes
network 10.1.12.0 0.0.0.255 area 0
network 200.1.1.0 0.0.0.3 area 0
ip route 0.0.0.0 0.0.0.0 200.1.1.1
SPOKE 2
interface FastEthernet0/0
ip address 200.2.2.2 255.255.255.252
ip pim sparse-dense-mode
speed 100
full-duplex
interface FastEthernet0/1
ip address 10.2.22.1 255.255.255.0
ip pim sparse-dense-mode
speed 100
full-duplex
router ospf 200
log-adjacency-changes
network 10.2.22.0 0.0.0.255 area 0
network 200.2.2.0 0.0.0.3 area 0
ip route 0.0.0.0 0.0.0.0 200.2.2.1
ip route 200.2.2.0 255.255.255.252 200.0.0.1
I have implemented multicast on the network in a hub and spoke topology. i have set up ospf routing protocol and broadcast all network and can successfully ping.
I am currently using VLC player as my media streaming server and client. i have set up rtp streaming from the HUb router using multicast ip 224.2.2.2 and unable to broadcast the multicast traffic across the spokes 1 and 2 PC's
I have never used vlc player never set up multicast network before and i am struggling with this and need help.
these are my router configs below
http://dl.dropbox.com/u/20145606/ip%20video%20config.txt
Message was edited by: Louis OjuwuI have edited the message and the configs and topology are visible above now. instead of the links i provided
-
Need Help With Military DTD Using FrameMaker 8
Fellow Forum Members,
I hope someone out there with experience in using Department of Defense DTDs with FrameMaker can contribute to this thread.
Attached is the MIL STD 400051-2 DTD that needs to play with FrameMaker. Does anyone out there know where I could find FrameMaker templates already setup that comply and play with the MIL STD 400051-2 DTD standard? If the Department of Defense is freely distributing the MIL STD 400051-2 DTD, shouldn't somebody in the Department of Defense also be providing MIL STD 400051-2 FrameMaker Templates for free that are already setup? I would greatly appreciate if anyone out there could provide an online source where I could download MIL STD 400051-2 FrameMaker templates.
Lastly, can anyone out there clarify what the purpose of the entities are inside the "Charant" and "Boilerplate" folders? The Department of Defense does not provide a readme file that define what the "Charant" and "Boilerplate" folders are about.
Any info will be greatly appreciated. Thanks.I'll answer the specifics that I know about your questions, but please look at the post from Srini for additional info:
1) Do i need to do full export using SYS/SYSTEM user.
exp80 system/manager file=c:full.dmp log=c:\full.txt full=y consistent=yA full export will move as much information (metadata/data) as possible. In order to do a full export/import, you need to do this from a
privileged account. A privileged account is one with EXP_FULL_DATABASE for export and IMP_FULL_DATABASE for import.
2) Will there be any data corruption while export.The data in the objects that you are exporting is being read, nothing is written to user data. I'm not sure what this is available in 8.0.6,
but if you need a consistent export, look to see if consistent=y is available in 8.0.6. All this means is that the dump file created will have
consistent data in it.
3) Is export/import the only method of migration/upgradation.If you are changing hardware, the only supported way from 8.0 to 10.2.0.4, that I know of, is using exp/imp.
Hope this helps.
Dean -
Need help with database migration using export/import
Hi,
I am planning to do a database migration from 8.0.6 to 10.2.0.4. I am using export/import. Please answer some of my queries:
1) Do i need to do full export using SYS/SYSTEM user.
exp80 system/manager file=c:full.dmp log=c:\full.txt full=y consistent=y
2) Will there be any data corruption while export.
3) Is export/import the only method of migration/upgradation.
Please help
Thanks.I'll answer the specifics that I know about your questions, but please look at the post from Srini for additional info:
1) Do i need to do full export using SYS/SYSTEM user.
exp80 system/manager file=c:full.dmp log=c:\full.txt full=y consistent=yA full export will move as much information (metadata/data) as possible. In order to do a full export/import, you need to do this from a
privileged account. A privileged account is one with EXP_FULL_DATABASE for export and IMP_FULL_DATABASE for import.
2) Will there be any data corruption while export.The data in the objects that you are exporting is being read, nothing is written to user data. I'm not sure what this is available in 8.0.6,
but if you need a consistent export, look to see if consistent=y is available in 8.0.6. All this means is that the dump file created will have
consistent data in it.
3) Is export/import the only method of migration/upgradation.If you are changing hardware, the only supported way from 8.0 to 10.2.0.4, that I know of, is using exp/imp.
Hope this helps.
Dean
Maybe you are looking for
-
I am trying to download photoshop presets from online but can't seem to figure out how to open them in photoshop. They download sucessfuly and then goes to my download folder on my computer, from there I double click on the file and photoshop opens a
-
How to get PDF's not to open with Adobe Reader in Safari?
I recently got Adobe Acrobat Pro. It's a great application but now when I open PDF files in Safari they appear in some strange viewing mode (shown here:) !http://egillsigurdur.com/discussions/pdf.jpg! instead of the usual view (probably some Preview
-
CAN I USE A PROGRESSBAR WITH A SERVICE DOWNLOAD?
I know that I can, just not sure if I can do it the way that I want. In an AIR app, I have three dropdownlists that are populated by a service call that then displays media associated with the dropdownlists. I do not want the user to have to wait a
-
Scheduling Agreement Output type
Hi, I have a Scenario Where I need to trigger an output(Idoc) filtering by plant to a third party system. When I checked we have plant at Item level for the sales document. But the Output type needs to trigger at Header level. How can I do that.? Any
-
Lion server configuration blocked...
Hello ! My lion server configuration is blocked...my computer seems not to work .... I can not stop the configuration because the software tells me that he is still configuring.... I'm afraid that if i force closing the configuration application the