Need help with network

hi, i am trying to leave ubuntu, so i installed Arch Linux. it seems everything went allright on the CD installation, but i am having trouble with the network. i have a dell XPS M1330 with the intel 4965 card, and i believe that the card is recognized by the system.
i can scan for networks, and i can even connect to my network, and when i run "iwconfig" i can see all my network details, including the password, and th signal strenth, noise, etc.
so, everything indicates that i am succesfully connected to my network. but everytime i try a ping it fails misserably, with a host unknown. i've tried google, yahoo, msn... but it doesnt matter. they always fail.
can anybody help me?
btw, i've checked that hostname is the same on rc.conf and hosts

EDIT AFTER LAST TRY!!!!!
first of all, i have to say that even though the module is listed on rc.conf, everytime i start the computer i need to do a modprove iwl4965 for the network card to start working, then i have to do "ifconfig wlan0 up" and then is allright.
ok, tonight is the night!!!! lets get going
sputter wrote:But as a thought just to try and get your juices working, what happens if you enable the gateway in your rc.conf?
how do i do that? right now my rc.conf looks like this
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
sputter wrote:with wired connections at times you need to specify a broadcast address, what would happen if you ran
"ifconfig wlan0 192.168.0.221 netmask 255.255.255.0 broadcast 192.168.0.255"
i'll try on a few minutes,
EDIT: nothing special, same result as before
sputter wrote:Is your wireless module being loaded by the MODULES=() line in your rc.conf?
yes it is, iwl4965 is listed there
MODULES=(tg3 iwl4965 snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore)
megagram wrote:
After doing the manual addressing using ifconfig or the manual configuration in rc.conf, can you show us the output of "route"? Just type "route" and hit enter.
The broadcast flag is likely unneeded as a 255.255.255.0 netmask implies a 192.168.0.255 broadcast address. However, it's definitely worth a shot! I just wonder if, for some really really strange reason your router isn't using a 255.255.255.0 netmask. Can you try giving yourself a lower IP address? Try 192.168.0.2 this will guarantee that you are in the same subnet as your router.
Try this!
according to my wife's computer and my mint install, our netmask is really 255.255.255.0
i will try those suggestions tonight and post the outcome here, but to begin, this is "route" on my mint install
Tabla de rutas IP del núcleo
Destino Pasarela Genmask Indic Métric Ref Uso Interfaz
192.168.0.0 * 255.255.255.0 U 0 0 0 wlan0
link-local * 255.255.0.0 U 1000 0 0 wlan0
default 192.168.0.1 0.0.0.0 UG 0 0 0 wlan0
be right back
this is the outcome on arch before doing dhcpcd
Kernel IP Routing Table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.0.0 * 255.255.255.0 U 0 0 0 wlan0
and this is after doing "dhcpcd wlan0" and getting again the error i posted on my last message
Kernel IP Routing Table
Destination Gateway Genmask Flags Metric Ref Use Iface
169.254.0.0 * 255.255.0.0 U 0 0 0 wlan0
this time i was unable to get a working Access Point although i could connect to my network
Last edited by apertotes (2008-08-06 19:10:24)

Similar Messages

Need help with networking external hard drive

Hi,
I am working on a corporate network and I have a Western Digital My Book Studio Edition external hard drive attached to a Mac OSX 10.4. i have other Macs connecting through the network to this Mac and accessing the external hard drive and it works just fine for that.
What I need help with is the fact that I also have several PCs on the same network (all XP), that need to connect to the hard drive and access the files. I've been able to connect to the Mac using the XP by accessing the IP address. I also set the Mac up with password credentials so that I had to log in to the Mac to access the files. But when I try to access the Mac, it only shows the main computer drive as the only available share and no external drive.
Does anyone know how to access a Western Digital external drive on a Mac from a PC through a network?

For an external hard disk drive or other (different) system shared
storage devices to work, they probably should be formatted in a
format seen by both operating systems.
If the WD unit is not seen by Windows computers on your network,
the WD may have been formatted in HFS+ for the Macintosh. That
is OK unless you need a Windows computer to access the same.
The Macintosh can see and use a standard Windows disc format;
so the external drive may need to be reformatted away from HFS+
if that is really what is going on (and archive any data on the suspect
drive elsewhere, since it will be lost to reformatting overwrites)
and then both Mac OS X and Windows should see the files on there.
And Macs set up to run Windows may also see the non-Mac format;
without having to re-boot via BootCamp, if that option is in use.
As to the other question(s) I really have no idea at this point in time.
And since that may be the rub, hopefully someone will follow up here.
Good luck & happy computing!

Need help with network user accounts on Mac server App on Yosemite, any tips?

I've been trying to set up a small network with the Server app on Yosemite. I don't want to do anything crazy with the server, I'd just like to know how I can set up network user accounts so that they can login from other Mac computers on the same network. I already have Open directory set up, the Macs that will be used on the network with the server have already been joined to the server under login options. I have created the network user account, I have also joined the user account to a group that I created. When I try to login to the network account from one of the Macs, it doesn't work. I'm pretty rookie with Mac server, can anyway give me any pointers of what I should be doing? Or if I am doing something wrong. Thanks guys.

The most important step, once you've got Open Directory and DNS set up, with Local Network Users set up in Server.app, is to make sure that all client Macs are using the server's IP address as the primary DNS server in System Preferences > Network, and that they have joined the Network server in System Preferences > Users and Groups > Login Options.
Having said all that, I have just spent hours setting this all up only to find out that Mail doesn't currently work with Network Homes in 10.10.3 / Server.app 4.1.
I will be hoping that Apple recognise the bug, and put out a fix soon.

Need help with network adapters for presario sr2163wm

i cant get my network adapter to work on my presario sr2163wm,can someone help find them

Hi:
Below is the link to the network drivers you need for your PC.
Download the driver file for the operating system you have installed on your PC.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=6&Level=5&Conn=4&DownTy...
Paul

I need help with network install of SQL Developer 3.2

All,
Does anyone have any references on how to perform a network install for SQL Developer? Here is what I'm trying to achieve:
1. Network installation on drive S:\ (Windows, obviously)
2. User links to network installation
3. Connections are unique for each user
I found the 2006 posting of network install for Raptor, but I could not find anything that correlates with the latest release. All I have done so far is downloaded and unzipped. Any help/instructions/guides/tutorials are welcome.

You have installed!. The code for SQLDeveloper does not have an installer.
If the software is on S, say a shared drive, each user will start sqldeveloper and a directory called sqldeveloper will be created in their local %APPLICATION_DATA% folder. This will keep all connections etc unique for all users.
You will have to create a link from the S drive to the sqldeveloper.exe if you want a shortcut to start it. We dont provide it.
Thanks
B

Need help with Network Mapping

I have a WRT350N and have upgraded the firmware to 1.03.7. I have it setup and reliable, and am now trying to hook up a Lacie 500G hard drive to the usb connection. I have created a share and now am trying to get Vista to see it. When I map a network drive, no option for the router shows up. Under Network it just shows my computer, shared files and printers. When I click on the router under Network it times out and says the connection is busy connecting and disconnecting. Are there some settings I don't know about? I have enabled everything under the sharing tab in the Linksys menu Thanks.

try accessing the drive using start >> run >> \\router'sipadd .. if you see the drive , right click on it and click map network drive..check whether it makes any difference

Need help with duplicate print jobs over network that I can't cancel

I have the Photosmart Premium All-in-One on my home network. My kids who each have laptop running Windows 7 and are connected via wireless to the printer via a DLINK DIR-655.
They hit the print button too many times and it keeps printing over and over again.
Is there a way to get the printer to stop printing these duplicates. I tried turning off/on but they just keep printing.
We're wasting paper/ink and I need help with a solution.
Please let me know. Thanks.
Angelo

There should be a button with a red 'X' on it on the front of the printer. This is the print cancel button.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Need help with Airport Express and so on.

Ok so my main problem before getting into what I need help with here is that our MacBooks and now my iPhone 6 plus isn't staying online. Keep getting booted off and then I either have to select the network again or it will eventually go back on. If anyone has a solution or so please feel free to answer that as well. I'm running on Roadrunner with a Netgear 600 wireless router and a motorola modem. Both of which I'll leave the link to below for a better look.
My Main Question: So I'm looking at a new wireless router mainly and possibly a new modem. I know Apple products are trustworthy but how good is the Airport Express and other Airport products. Also what is the Maximum speed and Maximum data speed for the cheapest express station and if anyone knows the speeds of the other devices it would be greatly appreciated.

DSL Router to Netgear 5-port Switch and I used the switch to connect to Airport Extreme, TV, Blue-Ray DVD player and DirecTV Receiver.
The AirPort Extreme base station (AEBS) is a router so it will do what you need.
You need to reconfigure your setup. Connect the WAN port of the AEBS to the DSL router. Then connect the Netgear switch to one of the LAN ports on the AEBS. The AEBS will properly share the connection.

Need help with Berkeley XML DB Performance

We need help with maximizing performance of our use of Berkeley XML DB. I am filling most of the 29 part question as listed by Oracle's BDB team.
Berkeley DB XML Performance Questionnaire
1. Describe the Performance area that you are measuring? What is the
current performance? What are your performance goals you hope to
achieve?
We are measuring the performance while loading a document during
web application startup. It is currently taking 10-12 seconds when
only one user is on the system. We are trying to do some testing to
get the load time when several users are on the system.
We would like the load time to be 5 seconds or less.
2. What Berkeley DB XML Version? Any optional configuration flags
specified? Are you running with any special patches? Please specify?
dbxml 2.4.13. No special patches.
3. What Berkeley DB Version? Any optional configuration flags
specified? Are you running with any special patches? Please Specify.
bdb 4.6.21. No special patches.
4. Processor name, speed and chipset?
Intel Xeon CPU 5150 2.66GHz
5. Operating System and Version?
Red Hat Enterprise Linux Relase 4 Update 6
6. Disk Drive Type and speed?
Don't have that information
7. File System Type? (such as EXT2, NTFS, Reiser)
EXT3
8. Physical Memory Available?
4GB
9. Are you using Replication (HA) with Berkeley DB XML? If so, please
describe the network you are using, and the number of Replica’s.
No
10. Are you using a Remote Filesystem (NFS) ? If so, for which
Berkeley DB XML/DB files?
No
11. What type of mutexes do you have configured? Did you specify
–with-mutex=? Specify what you find inn your config.log, search
for db_cv_mutex?
None. Did not specify -with-mutex during bdb compilation
12. Which API are you using (C++, Java, Perl, PHP, Python, other) ?
Which compiler and version?
Java 1.5
13. If you are using an Application Server or Web Server, please
provide the name and version?
Oracle Appication Server 10.1.3.4.0
14. Please provide your exact Environment Configuration Flags (include
anything specified in you DB_CONFIG file)
Default.
15. Please provide your Container Configuration Flags?
final EnvironmentConfig envConf = new EnvironmentConfig();
envConf.setAllowCreate(true); // If the environment does not
// exist, create it.
envConf.setInitializeCache(true); // Turn on the shared memory
// region.
envConf.setInitializeLocking(true); // Turn on the locking subsystem.
envConf.setInitializeLogging(true); // Turn on the logging subsystem.
envConf.setTransactional(true); // Turn on the transactional
// subsystem.
envConf.setLockDetectMode(LockDetectMode.MINWRITE);
envConf.setThreaded(true);
envConf.setErrorStream(System.err);
envConf.setCacheSize(1024*1024*64);
envConf.setMaxLockers(2000);
envConf.setMaxLocks(2000);
envConf.setMaxLockObjects(2000);
envConf.setTxnMaxActive(200);
envConf.setTxnWriteNoSync(true);
envConf.setMaxMutexes(40000);
16. How many XML Containers do you have? For each one please specify:
One.
1. The Container Configuration Flags
          XmlContainerConfig xmlContainerConfig = new XmlContainerConfig();
          xmlContainerConfig.setTransactional(true);
xmlContainerConfig.setIndexNodes(true);
xmlContainerConfig.setReadUncommitted(true);
2. How many documents?
Everytime the user logs in, the current xml document is loaded from
a oracle database table and put it in the Berkeley XML DB.
The documents get deleted from XML DB when the Oracle application
server container is stopped.
The number of documents should start with zero initially and it
will grow with every login.
3. What type (node or wholedoc)?
Node
4. Please indicate the minimum, maximum and average size of
documents?
The minimum is about 2MB and the maximum could 20MB. The average
mostly about 5MB.
5. Are you using document data? If so please describe how?
We are using document data only to save changes made
to the application data in a web application. The final save goes
to the relational database. Berkeley XML DB is just used to store
temporary data since going to the relational database for each change
will cause severe performance issues.
17. Please describe the shape of one of your typical documents? Please
do this by sending us a skeleton XML document.
Due to the sensitive nature of the data, I can provide XML schema instead.
18. What is the rate of document insertion/update required or
expected? Are you doing partial node updates (via XmlModify) or
replacing the document?
The document is inserted during user login. Any change made to the application
data grid or other data components gets saved in Berkeley DB. We also have
an automatic save every two minutes. The final save from the application
gets saved in a relational database.
19. What is the query rate required/expected?
Users will not be entering data rapidly. There will be lot of think time
before the users enter/modify data in the web application. This is a pilot
project but when we go live with this application, we will expect 25 users
at the same time.
20. XQuery -- supply some sample queries
1. Please provide the Query Plan
2. Are you using DBXML_INDEX_NODES?
Yes.
3. Display the indices you have defined for the specific query.
     XmlIndexSpecification spec = container.getIndexSpecification();
     // ids
     spec.addIndex("", "id", XmlIndexSpecification.PATH_NODE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
     spec.addIndex("", "idref", XmlIndexSpecification.PATH_NODE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
     // index to cover AttributeValue/Description
     spec.addIndex("", "Description", XmlIndexSpecification.PATH_EDGE | XmlIndexSpecification.NODE_ELEMENT | XmlIndexSpecification.KEY_SUBSTRING, XmlValue.STRING);
     // cover AttributeValue/@value
     spec.addIndex("", "value", XmlIndexSpecification.PATH_EDGE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
     // item attribute values
     spec.addIndex("", "type", XmlIndexSpecification.PATH_EDGE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
     // default index
     spec.addDefaultIndex(XmlIndexSpecification.PATH_NODE | XmlIndexSpecification.NODE_ELEMENT | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
     spec.addDefaultIndex(XmlIndexSpecification.PATH_NODE | XmlIndexSpecification.NODE_ATTRIBUTE | XmlIndexSpecification.KEY_EQUALITY, XmlValue.STRING);
     // save the spec to the container
     XmlUpdateContext uc = xmlManager.createUpdateContext();
     container.setIndexSpecification(spec, uc);
4. If this is a large query, please consider sending a smaller
query (and query plan) that demonstrates the problem.
21. Are you running with Transactions? If so please provide any
transactions flags you specify with any API calls.
Yes. READ_UNCOMMITED in some and READ_COMMITTED in other transactions.
22. If your application is transactional, are your log files stored on
the same disk as your containers/databases?
Yes.
23. Do you use AUTO_COMMIT?
     No.
24. Please list any non-transactional operations performed?
No.
25. How many threads of control are running? How many threads in read
only mode? How many threads are updating?
We use Berkeley XML DB within the context of a struts web application.
Each user logged into the web application will be running a bdb transactoin
within the context of a struts action thread.
26. Please include a paragraph describing the performance measurements
you have made. Please specifically list any Berkeley DB operations
where the performance is currently insufficient.
We are clocking 10-12 seconds of loading a document from dbd when
five users are on the system.
getContainer().getDocument(documentName);
27. What performance level do you hope to achieve?
We would like to get less than 5 seconds when 25 users are on the system.
28. Please send us the output of the following db_stat utility commands
after your application has been running under "normal" load for some
period of time:
% db_stat -h database environment -c
% db_stat -h database environment -l
% db_stat -h database environment -m
% db_stat -h database environment -r
% db_stat -h database environment -t
(These commands require the db_stat utility access a shared database
environment. If your application has a private environment, please
remove the DB_PRIVATE flag used when the environment is created, so
you can obtain these measurements. If removing the DB_PRIVATE flag
is not possible, let us know and we can discuss alternatives with
you.)
If your application has periods of "good" and "bad" performance,
please run the above list of commands several times, during both
good and bad periods, and additionally specify the -Z flags (so
the output of each command isn't cumulative).
When possible, please run basic system performance reporting tools
during the time you are measuring the application's performance.
For example, on UNIX systems, the vmstat and iostat utilities are
good choices.
Will give this information soon.
29. Are there any other significant applications running on this
system? Are you using Berkeley DB outside of Berkeley DB XML?
Please describe the application?
No to the first two questions.
The web application is an online review of test questions. The users
login and then review the items one by one. The relational database
holds the data in xml. During application load, the application
retrieves the xml and then saves it to bdb. While the user
is making changes to the data in the application, it writes those
changes to bdb. Finally when the user hits the SAVE button, the data
gets saved to the relational database. We also have an automatic save
every two minues, which saves bdb xml data and saves it to relational
database.
Thanks,
Madhav
[email protected]

Could it be that you simply do not have set up indexes to support your query? If so, you could do some basic testing using the dbxml shell:
milu@colinux:~/xpg > dbxml -h ~/dbenv
Joined existing environment
dbxml> setverbose 7 2
dbxml> open tv.dbxml
dbxml> listIndexes
dbxml> query     { collection()[//@date-tip]/*[@chID = ('ard','zdf')] (: example :) }
dbxml> queryplan { collection()[//@date-tip]/*[@chID = ('ard','zdf')] (: example :) }Verbosity will make the engine display some (rather cryptic) information on index usage. I can't remember where the output is explained; my feeling is that "V(...)" means the index is being used (which is good), but that observation may not be accurate. Note that some details in the setVerbose command could differ, as I'm using 2.4.16 while you're using 2.4.13.
Also, take a look at the query plan. You can post it here and some people will be able to diagnose it.
Michael Ludwig

Need help with Outlook 2013 connecting to Exchange server(2010)

Hi
I need help with Outlook 2013 and with my exchange server(2010) email account
After setting up account initially emails come in and than after an hour or two stop. My OWA is working fine with no issues. I have even created a forward rule in OWA to my GMAIL account whch works fine
However Outlook 2013 is not syncing messages, have difficulty in sending emails sometimes as it takes too long. In fact the connection also is intermittent. Even if the task bar shows connected to exchange, it seems that is not the case since new emails
and any emails I compose dont work. I have trouble shot the issue with my ISP and email service provide, but they havent resolved the issue I have also done a TraceRoute and that shows no drops or problems to he exchange server.
Can someone please help me resolve this matter so I can continue to use Outlook 2013( running Windows 8.1) in both my computers which have the identical problem
Look forward to a solution soon
Thanks

Hi Angela
Thanks for your message
To answer your questions, please note the following
a) My account is set up in Cache Mode( not online mode)
b) I am the only other user on the account
c) When the connection to the exchange server is broken, I see upon clicking connection tab that there is no information in the box, and when I press reconnect it starts showing "connecting"
d) When the connection to the server is there, it shows connection as "established"
e) Sorry I dont understand th meaning of CAS array in your environment? Can you pls explain
Since yday I have been using Outlook 2010 on desktop and Outlook 2013 on my laptop using Exchange 2013 account. So far all emails are syncing, and I can send emails from both computers. However, I am concerned that the connection can break-off anytime,
as it has done that in the past on both outlook versions. The max time it has worked without any problem is 48 hrs and than after that the same issue of not connection, not syncing and unable to send emails happens
My ISP has checked and there is no network connectivity issues. My email service provider has trouble shot the issue many times, but to no positive results. I have also changed the profile a few times, but the intermittent connectivity problem hasn't
been resolved.
Can you identify the possible causes and more importantly a working permanent solution please
Thanks
Mahesh

Need help with reviewing in acrobat professional 8.0

Hi,
I need help with reviewing in adobe acrobat professional 8.0 for windows.
When I click in Edit->Preferences->Reviewing I choose Network folder and in browse button I select the network folder.
It´s ok, but when I restart the computer, the configuration of reviewing dissapear.
Any sugestion for solve this problem?

The closest I came was:
// Custom calculation script
(function () {
    // Get the field values, as strings
    var s1 = getField("Charged").valueAsString;
    var s2 = getField("Reduction").valueAsString;
    // Perform the calculation if both fields are not blank
    // and Charged is not zero
    if (s1 && s2 && +s1 !== 0) {
        event.value = 100 * (+s1 - +s2) / +s1;
    } else {
        event.value = "";
which I got from another thread. It works, but the result tends to have a - before the number. Also when I use the formatting in acrobat and select percentage the decimal placement gets confusing. I'm creating this form for a bunch of morons in my HR department so extraneous numbers makes them confused. I need the most simplified result possible.

I think I need help with driver (software) settings for D110a

I think I need help with driver (software) settings for D110a all-in-one
Product: D110a all-in-one
OS: Windows XP Professional
Error messages: None
Changes before problem appeared: None--new installation
The quality of photo images (mostly JPG files) in printouts is awful even though the files display beautifully on the PC screen. I am using
IrfanView software for displaying/printing. As far as I can tell, IrfanView is not the problem.
When I print the same images on a Deskjet 5150 attached to a different PC also running XP Pro and IrfanView, the quality of the printouts is at
least acceptable, Some would probably say good or very good.
It's dificult to explain in words the problem with the printouts. A picture of really pretty vegetables (squashes, tomatoes, watermelon, etc) comes
out much too red. Moreover, the red, which appears shaded on the screen, seems to be all one shade in the D110a printouts.
Something similar happens to a view of a huge tree in full leaf. On screen, there are subtle variations in the "greenness" of the leaves. In the
printout, all green is the same shade. In the same printout, the trunk of the tree is all a single shade of grey. It isn;t even obvious that the
trunk is a round, solid object.
I liken the effect to audio that disappears entirely when you lower the volume and gets clipped into square waves in even moderately loud passages.
I don't know whether the D110a driver software permits adjusting the parameters that appear to be set incorrectly, and if adjustments are possible,
how I would identify which parameters to adjust, how I would access them, or how I would adjust them. I'm hoping that someone can help. Thanks.
I forgot to mention that I have used the diagnostic application and it tells me that there are no problems.
e-mail me at [email protected]

brazzmonkey wrote:
Hi everyone,
I noticed the following message when network starts on my gateway
Warning: This functionality is deprecated.
Please refer to /etc/rc.conf on how to define a single wired
connection, or use a utility such as netcfg.
Then I realized the way network settings should be written in rc.conf has changed. But I can't figure out how this should be done.
Currently, my set up is the following (old way):
INTERFACES=(eth0 eth1)
eth0="dhcp"
eth1="eth1 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255"
ROUTES=(!gateway)
eth0 is on DHCP because the IP is dynamically assigned my ISP.
eth1 has a fix IP because it's on the LAN side.
No problem to use DHCP on eth0 with the new settings.
But for eth1, I don't know what I am supposed to write for gateway.
Wiki isn't clear on that one either, and it looks like many articles still refer to the old way.
Any guidance appreciated, thanks.
brazzmonkey,
you can't define 2 interfaces the old way (even though I saw some tricky workaround somewhere in the forums).
Use, f.e., netcfg:
Comment your old lines.
In /etc/rc.conf insert:
NETWORKS=(Eth0-dhcp Eth1-static)
DAEMONS=(..... !network @net-profiles ....)
In /etc/network.d create 2 files:
First one is named Eth0-dhcp.
Contents:
CONNECTION="ethernet"
DESCRIPTION="Whatever text"
INTERFACE=eth0
HOSTNAME="your hostname"
IP="dhcp"
DHCP_TIMEOUT=15
Second one is named Eth1-static.
Contents:
CONNECTION='ethernet'
DESCRIPTION='whatver'
INTERFACE='eth1'
HOSTNAME='hname'
IP='static'
ADDR='192.168.0.10'
GATEWAY='192.168.0.1' # your gateway IP
DNS=('192.168.0.1') # your DNS server
The names Eth0-dhcp and Eth1-static are not magic. They just must be the same in rc.conf and in /etc/network.d.
Hope it helps.
mektub
PS: netcfg must be installed.
Last edited by Mektub (2011-07-20 14:07:05)

I need help with my wifi text. I can't use them

I need help with my iPhone 4. I can't text since. I get wifi in my house ?

What is the make & model of the wireless router that you are trying to extend with the WN3000RP? Can any other wireless clients connect to the extended network, just not your iMac?

I need help with errorCode.ULS3001

I need help with errorCode.ULS3001I wanted to unlock it, but it always gives me the same error, I need my phone to be unlocked as soon as possible. what can I do? ...
The test is from multiple computers "Error: Sorry, we have technical difficulties with our network at this time. Please try again later. If the problem persists, try to delete the cache and cookies from your computer. Questions? Call us at 800.331.0500 or dial 611 from your mobile phone from AT & T. (errorCode.ULS3001)"

DId you try calling?

Need help with iMac OSX backup

Hi,
I currently have a mac book air running osx 10.8.
And i recently purchased a imac running osx 10.8.
I need help with the backup feature between my imac and macbook air.
I work with excel files a lot, using Microsoft office for mac.
so basically what i want is to have a 2 way backup between my imac and macbok air.
That is, when i make any changes, create or delete a file in either of the system, i want the other system to make the change automatically.
For example when i make changes to a spreadsheet (excel file) on my imac, i want the same to be updated automatically on my macbook air, and vice versa.
I want both the machines to have the same files, updating the files as they get modified. or deleting if its deleted on any one of the system. Like a 2 way sync.
Kindly let me know if theres any way to do this. or something similar that can help me, like i mainly require the excel spreadsheets to be updated, system files, other libraries are not important.
I can also put all my files in a single folder if thats required.
Ps. Both the machines are connected on the same network, and i can also hook a external drive for the backup purpose if required.
I searched google for softwares and couldnt find the appropriate ones.
Any help would be appreciated.
Let me know if you require any more info on this.
Thanks
Gaurav.
<Email Edited by Host>

rkaufmann87 wrote:
They don't even need to do that, the can create a dropbox account that woudl achieve the same result. Very simple, reliable and free up to 2GB of storage.
A few weeks after I installed Dropbox (when it first came out) I got an increase of space for a total of 5GB FREE!

Need help with network

Similar Messages

Maybe you are looking for