Need Siebel ThinClient Settings

Hi Everyone,
I have installed the Siebel 8.0 Enterprise server,Gateway server,Siebel server,Siebel Thick client and Tools.
I want to launch the Thin client.I am looking into it's settings in eapps.cfg and Siebel server\bin\enu\siebel.cfg.
But i am not getting exactly how to set the parameters to launch the siebel thin client successfully.
Hope some one will help me in this settings.
Regards,
dude craze

Similar Messages

I have a MacBookPro6,2 and would like to connect an older Dell flatscreen, model L17BNS. I would welcome any information about the type of cable I need and any settings I might need to change, etc. Thank you for your time.

I have a MacBookPro6,2 and would like to connect an older Dell flatscreen, model L17BNS. I would welcome any information about the type of cable I need and any settings I might need to change, etc. Thank you for your time! I really appreciate the assistance. Kathy

According to:
http://en.community.dell.com/support-forums/desktop/f/3515/p/19351107/19767627.a spx#19767627
It has DVI ports. This means you are best to use an adapter that supports DVI. Note there is no audio that carries over DVI. What you need is a mini-Displayport to DVI adapter, and the proper DVI cable. Since Dell doesn't have the specs, you'll need to tell us if you have pins or holes, and how many are grouped.

I'm using a TravelSIM to make calls home to Australia on my iPhone 4S while I'm overseas. Do I need to change settings, or do anything else, to make sure I don't pay too much? eg turn off push data - what else?

I'm using a TravelSIM to make calls and texts home to Australia on my iPhone 4S while I'm overseas. Do I need to change settings, or do anything else, to make sure I don't pay too much?
I have advice to turn off push data and don't use Google maps
Are there other things I should do so my costs will be kept low?
thanks for any answers from experienced iPhone using travellers!
kind regards, Di

It's not entirely impossible actually as someone has pointed out to me that I can turn on Call Forwarding and that stops any incoming calls. I've just forwarded it to my google voice number and then turned on "do not disturb" in google voice and whenever I get a call it goes straight to my google voice voicemail and my phone does nothing. The only thing now is I still get text messages but I think the phone calls bugged me more because they would make my music turn off for much longer.
Even though this isn't a perfect solution it's something so far so maybe you shouldn't just come out and say there's NOTHING I can do because so far I've found part of a solution. If you don't have anyting productive to say then just don't reply and close the tab. Thanks.
At this point I'm wondering if anyone knows of any Jailbreak tweaks that can enable what I want. Unless of course it's agaisnt the rules of this forum to mention jailbreak stuff...

Need help to Settings Apple iMAC 2012 and HP LaserJet 1100.

Need help to Settings Apple iMAC 2012 and HP LaserJet 1100.
I purchased a imac, 2012, before there was Windows 7. I have the HP LaserJet 1100 and Print Servers Trendnet TE100 P21, with Windows 7 it worked, but with MAC OSX 10.8 does not want to, do not go printing. Could help with the setting?
Нужна помощь в настроке Apple iMAC 2012 и HP LaserJet 1100.
Я купил imac 2012, до этого был Windows 7. У меня есть принтер HP LaserJet 1100 и принтсервер Trendnet TE100 P21, с Windows 7 все работало, но с MAC OSX 10.8 работать не хочет, не идет печать. Могли бы помочь с настройкой?

привет Roman,
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
10.5/10.6/10.7/10.8 instructions...
In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
if you hold option and click the "-" tab it resets the printing system.
http://www.macosxhints.com/article.php?story=20031215144430486
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x+++
    1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
    2.    Choose System Preferences from the Apple menu.
    3.    Choose Print & Fax from the View menu.
    4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..."       As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot.
Mac OS X: О сброса системы Печать ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
10.5/10.6/10.7/10.8 инструкции ...
В System Preferences> Печать и факс, правой кнопкой мыши или Control + Click на боковой панели списка принтеров, выберите Сброс системы печати.
если вы держите опцию и нажмите кнопку "-" на вкладке он сбрасывает систему печати.
http://www.macosxhints.com/article.php?story=20031215144430486
Безопасная загрузка с HD, (Удержание нажатой клавиши Shift нажатой при загрузке), запустите Disk Utility в Приложения> Утилиты, затем выделите диск, нажмите на ремонт разрешения.
Любые устройства, которые ранее появились в списке принтеров и факсов список необходимо будет добавить снова после перезагрузки системы печати.
Сброс системы печати в Mac OS X 10.5.x + + +
1. Для сброса системы печати в Mac OS X 10.5.x, выполните следующие действия:
2. Выберите Системные настройки в меню Apple.
3. Выбери для печати и факса в меню Вид.
4. Управление кнопкой мыши на список принтеров в левой части окна, затем выберите "Сброс системы печати" из контекстного меню. Если вы не видите списка принтеров, управление кнопкой мыши на текст "Нажмите, чтобы добавить + принтер или факс" и выберите "Сброс системы печати ..." В качестве альтернативы, если у Вас уже есть один или несколько принтеров в списке, можно Option-нажмите кнопку "-" (Удалить принтер) кнопки.
http://support.apple.com/kb/ht1341
Перезагрузку.

I need to restore settings

I need to restore settings and do not know the restriction code, not sure how it was setup 2 years ago. I was told to go to Itunes and it will give me an option to restore the settings, but I don't see that when I plug in my phone to the computerr and logon to itunes. What am I doing wrong? Any help is much appreciated.. thanks

Hello brando8936! We can certainly help you out. If you don't remember the code, you will need to put the phone in recovery mode to restore. http://bit.ly/SvXOAb If you don't know the code though, you may not be able to get your backed up information back.
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport

I need to move settings from one computer to another

Hello All,
After a computer failure, I need to move the DW CS4 settings (this may not be the best term to use, but bear with) from the dead computer's hard drive (drive works fine) to another machine.
Specifically, all the settings in Site Manager...I really don't want to enter all that in manually, as I have over a dozen sites to maintain.
Is there a way to do this? Copy a certain folder or folders, or a utility in DW?
I have a 2-bay e-sata drive dock attached to the second computer so I can access the files no problem.
Many thanks in advance!
Sincerely,
wordman

Wordman-GL wrote:
SE,
One thing, the drive is accessable on my second computer through the use of a drive dock. The computer that the drve came out of won't boot.
Cheers,
wordman
Bregent is correct about WIndows.
What I was stating is that if this is the original drive from the other computer it is a bootable drive. What you would normally do in this instance is tell the OS that you want to boot from the remote drive and not your C:/ drive in the working computer. On a Mac this can be done by holding down the option key on a restart ( http://support.apple.com/kb/ht1310 ). Then you are prompted to select the disk you want to boot. I believe Windows has a similar feature usually using the F keys on startup. Another way to think of the booting from other drives is that normally the BIOS will look in the USB or CD drive before looking at your hard drive to boot in case you were doing an OS upgrade. Otherwise, when you restarted, it would ignore the CD/USB installation and go straight to the hard drive.
If you are on a Mac I know the files are in the Library somewhere, but I don't know the exact filename and I can't find a KB article pointing to what you should be looking for. But if you are doing this I would be selective and only look for the Adobe and Dreamweaver files and nothing else.

Help needed with printer settings for wired ethernet connection

I'm hoping someone can help me with a network printing issue. I have a large format color laser printer (Tektronix Phaser) and since moving to OS 10.6 I can't figure out how to configure the printer so that the system sees it. I have a simple wired ethernet network with a couple of Macs and a couple of printers. All devices are connected via a switch. When using earlier OSs I was able to connect to the Phaser using Ethertalk. Obviously this is no longer supported and I can't figure out how to set the printer so the OS can see it. I have lots of options which can be turned on or off and in some cases set up in other ways: Ethertalk, IPX, Netware, TCP/IP, DNS, LPR, HTTP and remote internet printing, I've tried messing with these but the result is always the same--system doesn't see the printer. Currently Ethertalk is on, IPX and Netware are off, TCP/IP is on, DNS and LPR are on, as are AppSocket, HTTP, FTP and remote internet printing. I can change the IP address but no matter what address I've tried I cannot ping the printer. (I'm using a Gutenprint driver for this printer.)
I don't really know enough about all this to get anywhere and I haven't been able to find help anywhere even from tech friends. Xerox won't help me and neither will Apple. Any help would be appreciated. I can supply more detail on specifics where necessary. Thanks, Bob

Old Phaser models may becoming more and more difficult to use, but you can give this a try.
1. Configure the printer via front panel to use TCP/IP and enable DHCP if it's supported. If not then you will need to configure an IP address for the printer together with your local network's mask, and gateway IP address. Except for the first the others will be provided by opening Network preferences to see what those settings are. The printer's IP address needs to be set somewhere within the range of IP addresses your router provides locally.
2. You need the PPD file required for your printer. If you have the Phaser driver installer you can use it to install the PPD or you can extract the specific PPD from the installer package. This part is tricky because I don't know where you may find the driver now if you don't have the installer. The older installers can be accessed through the Finder by selecting the package then CTRL- or RIGHT-click and select Show Package Contents from the contextual menu. You can then rummage through the package to search for the PPD for your printer. Then navigate to the /Library/Printers/PPD/Contents/Resources/ folder and drop the PPD file inside.
3. Open Print & Fax preferences and click on Add [+] to add a new printer. Click on the IP icon in the toolbar. Select Line Printer Daemon - LPD from the Protocol drop down menu. Input the IP address you assigned the printer in the Address field. You can file in the optional fields that follow. Then from the Print Using drop down menu locate the listing for your printer and select it.

I need to transfer settings from my Macbook to a new Macbook pro. what are the steps I need to follow?

I need to transfer the settings (mail, safari, etc.) from my Macbook to a new Macbook pro. what are the steps I need to follow?

Time Machine will sort that out, you got an external HD ?

Need network security settings for wireless printer set-up

I have an older airpot extreme base station. I'm trying to set-up my wireless brother printer and it says that I need the following network information:
SSID- I know this one
Authentication Method (open system/shared key/WPA-PSK/WPA2-PSK)
Encription Mode (None/WEP/TKIP/AES/CKIP)
Encryption Key (WEP key/Passphrase)
From what I've found, I believe that I should be using WPA-PSK and TKIP, but what is that passphrase that I'm supposed to use or where can I find out that information?

I am also trying to set up a wireless printer set up. I have an Airport Extreme and a new Brother wireless printer. Sounds perfect, right? Well, I am so confused right now. I bought an Airport Extreme while overseas a bunch of years ago and am now using it in the States. I have no memory of any info such as what is being asked from me to set up wireless printing. I don't remember the wireless security password, authenication method, or either of the Encryption thingies. I don't know where to find this information, whether it be on my computer somewhere or online. Please advise. Plus I don't use any security settings as I live pretty far from other humans in my neighborhood. Does that matter in the big picture?
Please help a girl out!

Need of Proxy settings

Hi,
   Please post me the details of why we need proxy settings in detail...
   1.why to Create a HTTP connection in the business system
   2.why to Configuration Business system as local Integration Engine.
   3.why we need a Connection between Business System and System Landscape Directory.
   4.why to Maintain the SAP J2EE Connection Parameters for LCRSAPRFC and SAPSLDAPI in SAP J2EE engine
   5.why to Maintain SLD access details in Transaction SLDAPICUST.
Thanks
D. Nisar

Hi Nisar,
i think you are new to SDN, before posting any doubts/Queries please search in SDN and then post. Most of your doubts/Queries will already be answered here.
since you are a beginner please go through this link, hope it helps,
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50d69314-1be0-2b10-11ab-8045021f0c3a?quicklink=index&overridelayout=true
next time please search before you post.
Thanks & Regards
Ridhima

Error loading control. a newer version needed. the default settings will be used

Hi I am using LabVIEW DSC 7.1 for programming my application. My VI contains NI hypertrend which I am publishing on a browser using the web publishing tool. When I open the web browser on a different computer I get this error- Component works Error loading Control. A newer version needed. The default settings for the control will be used. I have disabled firewall, pop up blocker etc...but for some reason it keeps giving me the same error. I read the knowledge base and it talks something about the .OCX file. I am not sure what I am supposed to do..I also have the DSC runtime installed in my machine. I'd appreciate it if someone could help me with this.

If you're on a 64-bit OS, OCX files must be in the folder: %windir% \ SysWOW64
and not in %windir% \ System32 (only for 32 bits OS)
>> %windir% is the environment variable that defines the Windows folder! (eg: C:\Windows)
French version:
Si tu es sur un OS en 64 bits, les fichiers .ocx doivent se trouver dans le dossier : %windir%\SysWOW64\
et non pas dans %windir%\System32
>> %windir% étant bien sur la variable d'environnement qui défini le dossier de Windows ! (par ex: C:\Windows)

I recorded 24 bit audio. need to change settings to 24 bitrate

I recorded 24 bit and it sounds terrible. I'm assuming I need to change the bitrate to 24 in FCP. How do I do that. Footage is from
Red One Camera but I'm not importing footage yet. I'm just checking the sound files and they sound terrible.

There is a lot of noise. I did another test and changed it back to 16 bit and it was fine. I played it in Quick time and it did the same thing. I was told I need to change my settings in fcp to 24

Need color management settings for photoshop version 8.0

I need to reset the color management settings for photoshop 8.0. Can someone let me know what are the correct defaults?

Probably the most commonly used is "North American Prepress 2" but which you choose depends entirely on the kind of work you are currently doing.

Help needed getting old settings into Logic X

I've been using Logic for a very long time, so I have thousands of plugin settings that I've saved or downloaded over the years. Logic 9 used to automatically include everything from the Plugin Settings folder within the Logic 6 Series folder - all settings would appear in a submenu called Logic 6 series.
Now in Logic X, this doesn't happen.
My first thought is that I'd have to open the old folder for each plugin, then copy the settings into the new Plugin Settings folder, but I'd have to first make a new sub-folder in the new location called Old Settings (or whatever).
This could could take me until March 2015, or longer if I sleep and eat in between.
Are there any geniuses here that can suggest an Automator action that will do this?
Or any other ideas?
I've tried aliases but they don't work for the whole Old Plugin Settings folder - I'd have to make an alias for every plugin which again would take ages.
Any suggestions would be appreciated....

Harm is absolutely correct with respect to how a DBA controlled password change is handled. From an auditor perspective, this would require showing sufficient documentation and SOP on how a password change is handled by a privileged user. This would include auditing, technical procedures, security policies, etc.
However, if you are showing an auditor how an individual user could change his or her own password (assuming this is allowable based on site policy), if the user is assigned an appropriate profile that has the resource limit set for password_verify_function it will check to ensure that the new password is modified by at least three characters, amongst other things. This is the default, but can certainly be customized to look for four, as in your example. To cover your bases, this would also need to be documented in detail.

Reinstalling Mac OS X Server 10.6 - need to preserve settings

I need to reformat the system drive on my Mac OSX 10.6 server, and reinstall the OS. I have exported the Users & Groups from Workgroup Manager, exported the Preferences and plist from Server Admin. Is there anything else I need do to preserve the same network environment after the reinstall? How do I maintain DNS and Open Directory settings?

Copy the entire boot disk out to an external disk using Disk Utility — clone the boot disk to an external disk once or twice — wipe the boot disk, and then tell 10.6 to migrate the settings in during the installation.

Need Siebel ThinClient Settings

Similar Messages

Maybe you are looking for