Need to uncheck the box labeled Preserve RGB Numbers in Color Management

I am trying to set up my color settings for dye sub and the guide I was given for my printer settings shows that in Color Management, the box next to Preserve RGB Numbers should be unchecked. However, in my settings, this is grayed out with the box checked so I am unable to change it. Anyone know how to get around this? Thank you so much!!

Well I'm printing from my RICOH printer onto dye sub paper to be transferred onto ceramic ornaments and the color is never consistent. I'm using the Sawgrass Ink Palette in RGB that's recommended with dye sub so I'm wondering if that little box being checked when it's supposed to be unchecked is the issue

Similar Messages

  • Can't prevent the addon checker from installing on DL even though I uncheck the box so I cannot do updates, help please.

    I finally decided to give ver 21 a chance. I did not use the help option in the browser but came directly to the Mozilla site and did the download from there. I chose the custom install and accepted the choices until the screen with the check box for the auto-maint. stuff. I do not want it and never have and have always unchecked the box and all went fine.
    This time no matter what I try, I cant prevent it. I finally had to roll back using system restore. I can not figure out out to turn this thing off once it down loads and I just wasted another couple of hours getting a usable version of Firefox back in place.
    I would like to update, but I am not willing to go through this again. Any suggestions?
    Thanks
    Chris L.

    I did the install in the default folder- and have done upgrades this way for years.
    What happens is after doing the update, when I first click to open a Firefox browser window, before it opens I get a pop-up that says it is checking to see if my add-ons are up to date. After several seconds it then says they are and it closes.
    Somewhere in the past when this feature started to appear, it did so automatically if I did an update through the help page link.That is why I refuse to use it. It did not respect my choices as using it always returned that dang add-on stuff. Plus it never asked if I wanted it nor did it offer the maint. box option.
    What I used to do was use Explorer (not IE) on XP to get on the net. First I would delete Firefox, leaving my info. Then I used Explorer to go to the Mozilla site and downloaded Firefox as if it were my first time. Then I unchecked the box using the custom install route, the new version installed and the add-on thing never happened.
    I can't do the Explorer trick in Win 7 and I don't let IE be functional on my system. So I just went in the front door, clicked the install for Firefox and went the custom route, unchecked the box and got the dang add-on checker back,
    So what I did this time was to save a download of version 20.0.1 from the rollback site I have used over the years instead of installing. Then I uninstalled Firefox, keeping my info, rebooted the PC and ran the download. When I did, I unchecked the box as always and when done, the add-on checker was back anyway.
    I finally had to do a system restore and and got version 20.0.1 back that way and am using it and no add-on checker runs. I am loathe to lose all my extensions or add-ons and settings that may be at risk doing a reset. I have been down that road before. I have been a Firefox user for a number of years now, it is the only browser I keep on my box.
    However, I am not a fan of software functions that try to take decisions away from me. I am rarely a fan of anything that gets labelled or actually named as smart for the most part. I do not mind software to help others who don't care if it usurps their ability to decide, I do object to being forced to use it. All I want is the off switch for it.
    It wasn't until I learned that two features included with ver. 21 I would not let on my system could be turned off that I was even willing to download the upgrade. And when I did, it took me a couple of hours to get back to a working version of 20.0.1 and rid myself of the add-on checker.
    On light of the above additional detail, any ideas?

  • I am trying to add an email with the microsoft exchange, I was told I need to uncheck the secure conncetion on the server page. Anyone know how to do this?

    I know my server information.
    I was told that you have to uncheck the box on the server page that says “this server requires ssl” or “secure connection”
    Problem I can't find where to do this...
    Any suggestions

    After you setup the email account you click on the account then click the advance button you will see the information. 

  • When downloading a file, I select "Save File", but I'm unable to check the box label "Do this automatically for files like this from now on." The box is faded out. It's very tedious when you have to select "Save File" everytime

    Click on the file to download
    The "Open" Dialog Box pops up
    Select "Save File"
    Try to click on the box labeled ""Do this automatically for files like this from now on."
    The box is disable

    Hello melanie90, see : [https://support.mozilla.org/en-US/kb/change-firefox-behavior-when-open-file#w_changing-download-actions Changing download actions]
    thank you

  • In the iDVD window, there is a box in the lower left corner.  When I scroll over it, I get the message to hide or show the intro movie.  Checking or unchecking the box seems to do nothing.  Can anyone explain?

    Working with iDVD on a project, there is a box in the lower left corner and sometimes another in the lower right corner.  Scrolling over the one in the lower left corner, I get a message indicating that this box hides or shows the intro movie.  I have checked and unchecked the box, but see nothing different in the project.  Nor can I figure out what is meant by "intro movie."  Can anyone explain?

    Go to iDVD Help and type in Intro Movie, and you will get the full version of this:
    Many iDVD themes have “motion menus” that include animations or video that loop, or play repeatedly, until the viewer clicks a menu button. Themes with motion menus have a motion icon in the lower-right corner.
    In addition to background video, iDVD motion menus may also feature an intro, or short animation, that plays once before the part that loops. Other motion menus also include an “outro” that plays after the viewer clicks a button, serving as a transition between the menu and the selected content.
    An example of an iDVD 6.0 theme with an intro and an outro is Reflection White Main. In this theme, the first drop zones appear in the intro, and the buttons and title appear just before the looping part of the background video. In the outro, everything flies offscreen after the viewer clicks a button.
    iDVD provides tools for viewing these motion menus without going into preview mode, which is especially helpful when you are filling drop zones, and for turning the intro or outro off.
    Here are ways to view and edit the background movie:
    ◼ 
    Drag the diamond-shaped motion playhead along the scrubber bar (shown below), to view the background movie, stopping wherever you like.
    (If you don’t see the motion playhead in iDVD, choose View > Show Motion Playhead.)
    ◼ 
    Deselect the checkboxes at the left and right end of the scrubber bar if you don’t want to use the intro or outro, respectively, in your DVD menu.
    The scrubber bar shows the intro and outro as shaded areas at the beginning and end.
    You can also control the intro and outro from the Menu Info window. With your pointer over the menu (and with no buttons or text objects selected), press Command-I to open that window. Select or deselect the Intro and Outro checkboxes in the Background section of the window.
    NOTE: If you drag your own movie to a motion menu background, the outro is automatically removed. To customize the background and keep the outro, use a still image in the menu background instead of a movie.

  • I'm getting this message: "Firefox prevented this page from automatically redirecting to another page." but unchecking the box for "warn me when websites try to redirect or reload the page" has not helped. I'm using Firefox 3.6.3 on Mac OS 10.6.3. M'aidez

    Can't load Google Calendar. I'm getting this message: "Firefox prevented this page from automatically redirecting to another page" but unchecking the box for "Warn me when websites try to redirect or reload the page" has not helped. I'm using Firefox 3.6.3 on Mac OS 10.6.3. It's not reported as a generalised problem in Dashboard. Google Calendar opens and works fine on my 12" PowerBook G4, but this is a recent problem on my G5 13" MacBook Pro. Mayday!
    == URL of affected sites ==
    https://www.google.com/accounts/ServiceLogin?service=cl&passive=1209600&continue=http%3A%2F%2Fwww.google.com%2Fcalendar%2Frender%3Ftab%3Dmc%26pli%3D1&followup=http%3A%2F%2Fwww.google.com%2Fcalendar

    No I'm not using NoScript, but I'm pleased to report that the problem got resolved by deleting the original bookmark, logging in again, opening Google calendar, then bookmarking it again.

  • I want to uncheck the box "Display PDF in Browser" in Reader X preferences but it is greyed out.

    I want to uncheck the box "Display PDF in Browser" in Reader X preferences but it is greyed out in Preferences. No one seems to know how to get it unchecked??
    ANY suggestions please, am wasting my saturday morning. This issue resulted from upgrade to latest Adobe Reader version X but uninstalling and reinstalling the older version is not the answer, tried that :-)

    See if this helps: http://forums.adobe.com/message/4340658
    That is, running Firefox in 32-bit mode with a recent version of FireFox (>= 10).

  • HT1751 This was extremely helpful, however, all the songs I had unchecked in my library are now checked on on my new MacBook.  My playlists are all there, but I do I really need to uncheck the ~3,000 - 4,000 songs I had previously unchecked?

    All the songs I had unchecked in my library are now checked on on my new MacBook.  My playlists are all there, but I do I really need to uncheck the ~3,000 - 4,000 songs I had previously unchecked?
    My original library exists on my old computer, so I could still transfer it.   Any suggestions are welcome and appreciated - thank you!

    This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
    tt2

  • I have unchecked the box that converts my higher resolution songs to 128 kpbs downloaded to my iPod classic. How do I restore the higher resolution songs to the iPod?

    I have unchecked the box that converts my higher resolution songs to 128 kpbs downloaded to my iPod classic. How do I restore the higher resolution songs to the iPod?

    Uncheck the option to sync music to your iPod from under the iPod's Music configuration pane and hit Apply.  After it has completed, retick the option and again hit Apply to resync all your music from your main iTunes library back to your iPod.
    Or restore your iPod and start from scratch.
    B-rock

  • I signed into icloud to find my iphone. icloud tried to upload my calendar, froze my desktop calendar and then erased it when I unchecked the box. I use time machine. Can I restore my desktop calendar and how to I keep everything but my phone locator off.

    I signed into icloud to find my iphone. icloud tried to upload my calendar, froze my desktop calendar and then erased it when I unchecked the box. I use time machine. Can I restore my desktop calendar and how do I keep everything but my phone locator and mail off? I do not want to sync my desktop with icloud except for mail.

    This the Activation Lock. Read here: http://support.apple.com/kb/HT5818
    The only way is to login to iCloud with your computer browser and wipe the iPhone.
    If you can't then you have a brick, Apple won't help and AL cannot be bypass.
    https://www.icloud.com

  • I've unchecked the boxes for apple e-mails (news and iTunes offers) but I still get marketing info which I don't want. What else can I do to stop the spam?

    I've unchecked the boxes for apple e-mails (news and iTunes offers) after following the link at the bottom of a marketing e-mail from Apple.
    Unfortunately I still get marketing info which I don't want. What else can I do to stop the spam?

    The e-mail checks out as having come from an IP address registered to Apple.
    Received-SPF: pass (mxeu0: domain of insideapple.apple.com designates 17.254.6.124 as permitted sender) client-ip=17.254.6.124; envelope-from=[email protected]; helo=msbadger0204.apple.com;
    The sender address wasn't spoofed and all the links in the mail lead to legitimate apple web sites. (It was an advert for a MacBook Air christmas special). There was a link at the bottom of the e-mail which takes me to the Apple 'manage your e-mails' page.
    List-Unsubscribe: <http://mynews.apple.com/subscriptions?v=2&la=de_de&.....
    On this page there are check boxes for the various Apple news and iTunes marketing e-mails, and the option to change my e-mail address. The boxes are not checked but I still get marketing e-mails.

  • Recently i uncheck the box i tune wifi sync and tried to connect my usb cable to my macbook, now i tune cant detect my i phone at all!! Pls help as i cant sync my i phone anymore!

    Recently i unchecked the box i tune wifi sync and try to connect my i phone using the usb cable provided. Now my macbook cant detect my phone, help!!  I cant sync my phone anymore....

    The update did not do anything.
    AT&T cannot and will not do anything, they do not provide support for iPhones, Apple does.
    The issue is not with the iPhone or iOS if you've reset network settings and tried forgetting the Wi-Fi Network, it is specific to the network.
    Check the settings on the router, try disabling the security settings first... that will clarify the issue is not with the device but rather the Network.

  • TS2504 I have installed Logi Pro and it has written over my garageband features (as above). Ive tried to reinstall Garageband as described above with the Installation DVD. But when i get to step 4 it wont let me check or uncheck the box for Garageband, it

             I have installed Logic Pro and t seems to have wreitten over my GArageband 09 functions. when i try to reinstall Garageband alone from the bundle on teh installation DVD it wont let me check OR uncheck the Garageband box (stage 4 in Apple's isntructions above) . It does let me check teh other boxes for iPhoto etc.
    Do i need to reinstall teh complete bundle for iLIfe 09? Will this mean I lose any of my material? eg photos in iphoto or clips in imovie?
    scarey stuff!
    please advise
    sarah

    drumkit2 wrote:
    when i try to reinstall Garageband alone from the bundle on teh installation DVD it wont let me check OR uncheck the Garageband box
    http://www.bulletsandbones.com/GB/GBFAQ.html#installerdisabled
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • I changed the name of my imac to reflect it's new location, but inadvertently, it unchecked the box to allow the administrative user account to administer the machine.  I am trying to reinstall with a time machine backup and am unable

    I need a little help.  I changed the name of my imac to reflect it's new location, but inadvertently, when I saved the change, the system unchecked the "allow this account to administer the computer" so now I can't make any changes....  I tried to reinstall the OS, but it wants me to go online while installing and use my apple id, but this is not my iMAC, so I don't want to use my account.  Also, I am working in a building that will not allow me network access until I authenticate, which can't be done unless I open the browser first.  So I'm stuck at this point.  I can't even restore a time machine backup that I have because it gives the error message that the system encountered an error.  Any suggestions?

    Ask the admin/owner to sign in. 

  • Do I need to keep the box for my iMac?

    Hi, does anyone know if there is anything in the Apple Care agreement or any other aspect of my warranty that requires me to keep the box for my iMac, will I ever have to send it back to Apple or will they always send an engineer out to it?
    The box is huge, it will not go through the hatch into the loft and I am fed up of moving it about in my garage.

    Yes, I am trying to find somewhere to store it.
    Is it ever likely that to get a repair for my iMac that apple would ask want it shipped back to them, in which case I would need the box?

Maybe you are looking for

  • UK Payroll Query

    Hi, I need to pull out few PERNRs from diffrent payroll areas whose hiring date is 01.04.2013 and Retroactive accounting must be done for them after April 2013. Plese help

  • Can't connect from Windows - "Can't find a vfs module [darwin_acls]"

    Since upgrading to 10.5 (now at 10.5.4), I've been unable to connect to my mac from windows using File Sharing. I get an error message in windows after browsing to my machine that says: "<machine name> is not accessible. You might not have permission

  • Calculating percentages by date grouping in a Cross-tab report.

    I have created a monthly at glance dashboard, and I am having difficulty with the percentage breakdown.  I have the report grouped by date, and sorted by month with YTD total on the right. *The problem is all the rows with a percentage are calculatin

  • GETTING UPSET

    I cant get a single jar to work on my computer!! They ALL get the error: Could not find the main class, the manifest file looks like this: Manifest-Version: 1.0 Created-By: 1.4.0_01 (Sun Microsystems Inc.) Main-Class: hello

  • Opus codec Support?

    Anyone know any status for opus codec support in the native end users flash player? Been very curious,impressed with test results of my own,  and excited about this: http://www.opus-codec.org