Needs to be control S_GUI auth.

R/S All,
I need to give authorization of copy (CTRLY) & PASTE (CTRLV) to my users but not the " EXPORT " function.
I have given authorization of S_GUI. In that if I remove value 61 to block "EXPORT" then users are not able to use Copy-Paste
function too.
Kindly guide me to for a solution where my users can have only authority of Copy & Paste not the EXPORT.

Hi,
Which version of SAP Gui are you on? I remember reading one of the SDN threads couple of months back which mentioned that "SAPGui Security Center" is a new feature available in version 7.20 which allows us to control such functionality like CTRL+Y, etc
Not sure how this can be achieved though, may be someone knowing it can enlighten me in this thread
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/002444be-7018-2d10-e18e-a8c537198ef6?quicklink=index&overridelayout=true]
Also, I tested out the scenerio with a user without S_GUI authorizations and CTRLY seems to work fine. Maybe, you can try clicking on the 2-color monitor icon (or press ALT-F12) and choose Quick Cut and Paste as a alternative to copying via CTRLY.
Just my 2 cents:-)
Sandipan

Similar Messages

I am looking to control a 4-way hydraulic solenoid valve. Do I need a PID control toolset, or can i control the system through my 16E4 daq card and scxi chasis

I am looking to control a 4-way hydraulic solenoid valve. Do I need a PID control toolset, or can i control the system through my 16E4 daq card and scxi chasis

I think you're asking 2 different questions.
The PID control toolset is for using PID loops for control; it's just software.
The DAQ card and scxi chassis are hardware. If you have the appropriate signal conditioning cards in your chassis to control/monitor your solenoid valve, then you can run a PID loop.
I believe the simple answer is: the PID control toolset is the best way to do control, but there are simple PID VI's (even on this website) that you can download and use for simple control.
Mark

I need help with controlling two .swf's from third.

Hi, thanks for reading!
I need help with controlling two .swf's from third.
I have a problem where I need to use a corporate designed
.swf in a digital signage solution, but have been told by the legal
department that it can not be modified in any way, I also can't
have the source file yada yada. I pulled the .swfs from their
website and I decompiled them to see what I was up against.
The main swf that I need to control is HCIC.swf and the
problem is it starts w/ a preloader, which after loading stops on a
frame that requires user input (button press) on a play button,
before the movie will proceed and play through.
What I have done so far is to create a container swf,
HCIC_container.swf that will act as Target for the HCIC.swf, and
allow me to send actionscript to the file I'm not allowed to
modify.
I managed to get that done with the help of someone on
another forum. It was my hope that the following script would just
start HCIC.swf at a frame past the preloader and play button, and
just play through.
var container:MovieClip = createEmptyMovieClip("container",
getNextHighestDepth());
var mcLoader:MovieClipLoader = new MovieClipLoader();
mcLoader.addListener(this);
mcLoader.loadClip("MCIC.swf", container);
function onLoadInit(mc:MovieClip) {
mc.gotoAndPlay(14);
But unfortunately it didn't solve my problem. Because there
is a media-controller.swf, that is being loaded by HCIC.swf that
has the controls including the play button to start HCIC.swf.
Here's a link to a .zip file with all 3 .swf files, and all 3
.fla files.
http://www.axiscc.com/temp/HCIC.zip
What I need to do is automatically start the HCIC.swf file
bypassing the pre-loader and play button without editing it or the
media-controller.swf in anyway. So all the scripting needs to be
done in HCIC_container.swf.
I know this is confusing, and its difficult to explain, but
if you look at the files it should make sense.
ActionScripting is far from my strong point, so I'm
definitely over my head here.
Thanks for your help.

Got my solution on another forum.
http://www.actionscript.org/forums/showthread.php3?t=146827

My business has 100 ipads 3g with no control at the moment - i need to now control the ipads - what apps they can use - and restict certian use on the ipads - whats the best way to do this - it will need to be done remotley.

my business has 100 ipads 3g with no control at the moment - i need to now control the ipads - what apps they can use - and restict certian use on the ipads - whats the best way to do this - it will need to be done remotley.

MDM -- moble device management
MDMs
Airwatch, Meraki, MobileIron, Profile Manager on OS X Server, or Zenprise
For a comparison see this page:
http://www.enterpriseios.com/wiki/Comparison_MDM_Providers
Airwatch
http://www.air-watch.com/
Meraki -- A free MDM [ expect lots of email and phone calls about upgrades ]
http://www.meraki.com/products/systems-manager/
https://discussions.apple.com/thread/4067210?tstart=0
Good howto by Sergio Sosa.
https://discussions.apple.com/thread/2594001?start=15&tstart=0
MobileIron
http://www.mobileiron.com/
Profile Manager by Apple
Zenprise
http://www.zenprise.com/

"atos needs to take control of another process for debugging to continue. Type your password to allow this."

I get this always "atos needs to take control of another process for debugging to continue. Type your password to allow this."
Please how can i stop this from coming on my Macbook?

If you're running a database application called "Bento," you'll have to stop using it. It's incompatible with Yosemite and has been discontinued by the developer. Other applications that have been reported to cause this alert are "Sketchup," "FontExplorer," and "Juniper Network Connect." Refer to the developer for support.

HT3477 Why would a Guest network need an Access Control List?

I have an Airport Extreme running software 7.6.4 and I have figured out today, to my dismay, that because I have an Access Control List active on my main network (with MAC addresses of my devices), the Guest Network feature, as implemented, becomes simply useless.
Essentially any friend coming at my place, to whom I want to share my internet connection for a while (say, a couple of hours) with an easy password, either provides me with the MAC address of his device, or has no access at all. And if he has to give me the MAC, then I could just simply add him to the main network in the first place and, BTW, I need to give him also the (complicated) password of my main network.
What is the purpose of a Guest Network then, if it is subject to the same access restrictions of the main one? I need to remove the access list on my main one, to offer quick and easy access to friends and family defeating the purpose of protecting my main network with MAC addresses and a separate guest network?
I don't get it. This is a bug. It has to be. I see no logic in it, in the way it is implemented. Or it should have 2 separate access lists, for flexibility. But a *Guest* network, should be by definition open, or easy access (with password, sure, if necessary) - and in case it should have restricted access, it should be by time maybe, not by MAC address....!

Why would a Guest Network need an Access Control List
The short answer would be that it would not need an Access Control listing......if you used the default settings in Timed Access.
Sorry, but I do not understand how you have constructed your Timed Access control list.
Normally, you would use the default settings and leave the "main" (and "guest") networks set for Unlimited Access.....and then only list the devices that you want to limit separately, establishing "rules" and timeframes for each device that you want to control.
When you do it the default way, a user would be able to connect to the Guest Network at any time, provided that he/she had the password for the guest network. No MAC Address needed at all.
If you wanted to limit the time that the "guest" could connect to the guest network, you would have to set up a "rule" for the guest. I would not normally think of limiting the time that a guest could connect.....(unless the guest were one of the grandkids).
It sounds to me as if you might have set the default network setting to No Access, and you have then set up each device with the times that they would be allowed to connect.
If you did it this way, then the default No Access would also apply to the Guest Network....and any guest would have to then be set up by MAC Address with a rule set for the times that they were allowed to connect.
Personally, I have changed the default rule for the "main" (and guest) networks from Unlimited Access to Everyday between 7:00 AM and 11:30 PM. So no one on either the main or guest network can connect before 7:00 AM or after 11:30 PM.
Then, there are a few rules that I have for devices that connect to the guest network to further limit them to certain times each day. You could do this as well for devices that you want to control on the "main" network.

"atos needs to take control of another process for debugging to continue" ??

Hi, I just updated to Yosemite, I am using SketchUp Pro and got a scary pop up from "Atos" saying : atos needs to take control of another process for
debugging to continue. Type your password to allow this". What do I need to do. I need to use Sketchup. I clicked continue and Sketchup crashed.
I thought It was a virus.
Please someone tell me what do I need to do? to fix? Thank you
thank you

It's a known issue with that application. Only Google can do anything about it.

I am createding a digintal flipbook for my work, we have adobe cloud. needs to have controls, sound,

i am createding a digintal flipbook for my work, we have adobe cloud. needs to have controls, sound, allow rss feeds, pdf download, print options, etc. what software works best to do this? are there plugins for flash that have these controls built in, where i just import my my pdf files?

If you don't already know enough about Flash's capabilities to answer this then you might want to consider an alternate solution, although the level of customization will be limited. The publishing portion of the application family can easily produce ebooks:
http://www.adobe.com/products/digital-publishing-suite-family.html
That's about as drag and drop as you can get for your basic needs.
If you need deep customization at the same time then Flash is perfectly good at this kind of thing, but there is no "easy button" that will do it all for you. There are many flipbook creation services (similar to the digital publishing route), but since you want RSS feeds, controls, sound, etc you may find the result isn't as complicated as you need.
I'd suggest just using Flash, getting a page roll effect plugin and creating your book by hand, giving you the full coding power of Flash to perform all your tasks. Some of them, like basic page flipping, you can find project source code for (page clipping example).

Using Excel with Visual C++ 6.0 (need a graph control that behaves as much like the one in CVI as possible)

I hate to beat this to death but I was unable to find a
clear answer to this question. Does NI provide Excel control from within
Visual C++ 6.0?
I read that NI supports the ANSI-C library only for Visual C++ 6.0 users:
Thread : "Re: Benifits of using measurment
studio for VC++ 6.0?"
NI REP : drohacek
Quote : "we made the decision to support Visual
C++ 6.0 users only through the ANSI-C interface and not through the Measurement
Studio MFC-based class libraries."
If there is a suggested way of controlling Excel from within Measurement Studio
for Visual C++ 6.0 then I’d love to know it.
If not, can a plain statement be made basically stating that if you want
to control Excel you can’t use a Visual C++ 6.0 environment even with Measurement
Studio support?
With .NET of course you can just decide to have Excel support added during
project creation. CVI can act as an ActiveX server and easily control
Excel just by building off the examples shipped with CVI. I see that
there is support, using the Measurement Studio for Visual C++ 6.0 Project Wizard,
for taking existing CVI projects and converting them to Visual C++ 6.0 projects
or for calling CVI libraries from a .dll from within Visual C++ 6.0. I suppose I could do the work
in CVI and then convert the project but I'm so deeply tied into all my MFC calls that I don't see
how I can cleanly include the CVI libraries into my existing VC++ 6.0 projects.
What I'm really after here is a visual graph control like the one in CVI that I
can use from Visual C++ 6.0. I purchased a 3rd party graph control for use
in VC++ 6.0 that works well but isn't really visual. I mean you can't
enter any values in it until you run the program and fill it out programmatically.
Then you can see which columns are two narrow, quit the program, adjust the
column width of your now empty control, and repeat, until you get the thing
looking the way you want. If I could call into Excel from within Visual
C++ 6.0 the way I do from within .NET
then I could use Excel to hold the table and just read in the values into my table
control at run time. Basically I'd use Excel as a visual development tool
for all my tables.
I do all my coding from within CVI and Measurement Studio for Visual C++
6.0. I'd use CVI for everything if I didn't depend so heavily on certain
outside controlled C++ .dll's. Could you please suggest then what I can
do to get Excel support for Visual C++ 6.0?
Last question :
Is there any plan to ever have a NI table control like the CVI table control for
use in Visual Studio? One that you can
completely set up before you do any compiling?
I imagine that the way Microsoft sets up their environment makes this idea impossible. Otherwise someone would
have come up with a truly “visual” table control before now.
Thanks,
Grant
Grant M. Johnson
Project Engineer
LECO Corporation

Hello Grant
You can most certainly use Excel with VC++ 6.0. Measurement Studio won't provided you with any classes to talk to Excel in VC++ 6.0. This is because Excel allows control via Automation and you can use its automation API to do anything you need with Excel. This is what CVI uses as well.
You can see this MSDN article on how to set this up. This mentions VC.NET, but it should work the same way.
Here is one that talks about VC 6.0 and Excel.
Here is a code project article about this.
Even with .NET, you have to do thru the Excel Automation support. Excel started shipping with Primary Interop Assemblies (PIA) which are .NET wrappers about the Excel Automation object model. C++ Automation is definetely not as nice as .NET, BTW
See this document for more information about the Excel object model.
I would not recommend using the CVI Excel libraries if all you want to use them for is Excel automation. You will end up creating un-necessary dependencies and go through extra layers that way. You can make calls straight to Excel from VC++ without requiring CVI.
One quick observation about your excel approach. If you decide to use Excel as your table, you might be requiring everyone who uses your application to have Excel installed on their machines. Just wanted to make sure this was acceptable to you.
Have you looked at the Datagrid Activex control, which is one of the common controls that ships with Visual Studio? You can add it to Visual Studio by right-clicking and picking it from the list of installed activex control. If you have not already, you should check it out.
Microsoft has made significant improvements in the number of controls they provide with .NET. They have a Datagrid control that seems to be what you need.
Measurement Studio did add some high level classes for Excel and Word Automation that simplify some common tasks, but these exists for VS 2003 C++ and VS 2005 C++, not for VC 6.0. Underneath, we end up using the same Excel automation classes, so you can easily setup something similar for VC 6.0. Plus you can find alot of references online on how to use the Excel Automation object model with C++.
We currently have no plans in Measurement Studio to create a table control unfortunately. I am assuming when you said graph, you actually meant table, since Measurement Studio already provides a ActiveX graph controls for VC++ 6.0 that is very similar to the CVI graph.
On a side note, VC++ 6.0 is really really old. Have you considered upgrading?
To summarize
- Yes, you can use Excel with Vc++ 6.0 without mstudio.
- Try using the Datagrid Activex control if you just need a table.
- Measurement Studio provides high-level excel and word classes for VC++ 6.0
- Measurement Studio provides a graph control for VC++ 6.0 which is very similar to the CVI graph.
- Measuremnt Studio does not have a table control.
- VC++ 6.0 is really really old. Have you considered upgrading?
Bilal Durrani
NI

Help needed in Message Control - very urgent

Hi Experts,
I have one requirement where in the customer wants to stop creation of IDOC which posts Invoice using message control and message control status should be changed to RED color and also the message should be populated in the processing log saying 'IDOC processing failed, External customer numbers not maintained'.
Could you please let me know any user exits or customer exits available for this purpose.
I have searched all the possibilities.
I have chanked the program RSNAST00 which picks up the data from table NAST and looks into table TNAPR to get the processing porgram for th selected output and also this program checks the partner profile and gets the process code which creates an inoice IDOC. I searched for user exits and customer exits to popolate the required messages and stop IDOC creation.
I am an ABAPER and i know i need to write code to do validation, but could not find the exact place where to write? I any ABAPERS looking at this post, please reply me.
Can anyone please advise me how to go about solving this issue?
Thanks
Srinath

Hi,
   I am sending the requirement.
Please send me the solution.
Requirements:
1.     EDI Invoice requires populating bottle UPC number not case UPC in IDOC and also populates customer PO number when invoice billing type is a credit. These changes need to be reflected on EDI invoice (Idoc INVOIC02).
Investigation:
Requirement 1. EDI invoices are populating segment E1EDP19 qualifier 003 based on the unit of measure in the line item. If shipment unit is CSE then it populates CSE upc, if shipment unit is EA then it populates Bottle UPC.
a.     It was found that the UPC populated on the EDI invoice was being read from material master Additional data tab. (Field SMEINH-EAN11). For the EDI invoice, the customers expect the bottle UPC on this column.
Requirement 2. Need to always populate Segment E1EDK02 Qualifier 001 (customer PO) on the INVOIC02 idoc. Standard SAP populates this information only when the billing type is F2 (regular invoice) and if the customer PO was entered in the Sales Order.
                            a) Premier requires this information to be populated in the idoc if the billing type is G2, RE, L2 also.
Solution:
Requirement 1.
       IDOC_OUTPUT_INVOIC function module needs to be changed to always populate the UPC number for the bottle UPC in segment E1EDP19 qualifier 003, field IDTNR. This number is found on the material master Basic data 1 view. Field name is MARA-EAN11.   Please see screenshot of where in the material master to find the bottle UPC.
     a. This change applies to all billing types (F2, G2, L2, RE etc).
       Requirement 2.
             Change IDOC_OUTPUT_INVOIC function module to always populate customer PO information in Segment E1EDK02 qualifier 001, field BELNR.
If billing type is equal to G2, L2, RE and VBRK-XBLNR not equal blanks then make BELNR = VBRK-XBLNR.
Segment: E1EDK02
                              Field: QUAL = 001
                              Field: BELNR = VBRK-XBLNR
Please help me how to move a step ahead.
Waiting for your immediate response.
Thanks,
Chandra.

DVD-SP Needs Real Font Control!

+Just sent the following to Apple's DVD SP Feedback; figured I'd post a copy here in case there were any seconders...+
I just had to search the DVD SP Apple Discussion Forum to confirm what I still have great difficulty believing:
That in this FOURTH edition of a "high-end" authoring app, there are STILL no basic font controls, whether for text boxes or text as buttons. You can pick the font, the size, the color, the justification, and turn a shadow on or off -- fine.
But what about leading (the spacing between selected lines)?
What about kerning (the spacing between selected characters)?
What about baseline and tracking controls?
These kinds of text-formatting functions are WAY overdue, especially for an app that claims to be in the "Pro" category. And the workaround -- having to create special graphics in Photoshop just to do some simple adjustments to line and/or character spacing??? -- c'mon.
Please, please, PLEASE get some reasonable font functionality into DVD SP ASAP! (And I'm talking a 4.3-esque update; NOT a wait-till-v5-in-FCStudio3 Upgrade.)
John Bertram
Toronto
(loyal Mac user since 1990)

I wouldn't be surprised if more integration with the features of that OS-based font panel that pops up in DVDSP will be included in future releases. Much emphasis has been placed on the strength of DVDSP as a design as well as an authoring tool. The Apple Pro Training Series books I teach from dedicate the first half of the book to using DVDSP's design tools (which I never thought had much to do with authoring at all, but there you go.)
However, I discovered another issue you should probably take into consideration any time you plan to use DVDSP's menu design features. Using any of these features, text objects, shapes, or any of those doodads or whangdoodles or gewgaws that show up over there in the Palette, it will cause any still menus with any audio or duration to be rendered as motion in your project. This isn't much of an issue, until you need to make a disc that uses lots of still menus with audio.
I have done a few discs that include several hours of music over many still menus. On the last one, I tried to use some text and palette graphics for navigation. I set up probably 30 menus before I started adding the audio. When I put the audio on the menus, my disc size went from 8MB to 10GB. A quick test showed that it was the palette graphics and DVDSP text that was preventing the menus from being treated as stills with audio, instead of rendering them as motion menus. Not only that, but all that rendered motion got embedded in my project bundle, making my project file balloon to serveral gigs as well.
One more reason I almost always just go the photoshop route...

Need picture style control for photo and video wit...

Lumia 1020 stands for its excellent phone camera. But I am very disappointed with its JPG output. The whitle balance is always a big problem, then too much contrast and oversaturation. True, the photo is crystal sharp, but who needs a bad color photo with great sharpness?
After Lumia Black, the DNG format comes. Now I cannot shoot without it. So I just find the 1020 is really great, but the built-in processing destorys all.
I don't know about other phone camera, but just look at the iphone's. Thanks to its great overall JPG output quality, keep much more details, so people love to use post-fx apps in their phone to make good-looking photos. Then 1020 for me, I just have to live with the DNGs instead of easy sharing.
808 Pureview has all the picture style control funtion, even in video !! Down the contrast sharpness and saturation, then the semi-CineStyle is coming! Look at the 1020's video sample, it is a shame.
All I want to say is: Can you (I don't know to call Nokia or Microsoft) make some control opitions like 808 or just low down the over contrast/saturation/sharpness photo and video. I don't wanna see a such amazing sensor and lens camera like this terrible.

In very general terms, the requirements for Video will exceed those for Photoshop (PS). If you are looking at PrPro CS5, then the video card WILL make a difference, and PS CS5 now takes advantage of the video card, than before.
For PS, the minimum HDD setup would be a 2x system with physical (not partitions) HDD's. Video has more requirements in this area, and I would say that a 3x setup is the minimum. Do read Harm's linked article, as it is the best that I have ever run across.
For the PS setup, just locate the Scratch Disks for PS on your extra HDD's, the ones with your Project and PrPro Scratch Disks.
Enjoy the new computer, and welcome to the forum,
Hunt

Need to reference controls in an Empty swf file ?

The current beta 2 of FABridge requires you to reference any
Flash controls you might want to create dynamically via Javascript
in the Empty .swf file first (the example just uses an array to
create a reference to each control). Trouble is, if you want to
have a generic .swf file that you use for different purposes with
different controls, referencing all the possible controls will make
the .swf file unnecessarily large (which affects download
performance etc.) - can Adobe confirm whether the final release
will still require you to reference controls in the .swf beforehand
or can controls be referenced dynamically as they are needed ?
Thanks

Can you provide code on how I can create a loop?
I'm not getting any error when calculating sum.
Here is what I'm trying to do, lets say I have two checks:
CHK1
Amount:200.00
Status: Issued
CHK2
Amount: 500.00
Status: Void
When calculatiing the tota for the checksl, I should see the total as 200 only because, the Check2 has been voided and it is considered zero.
I tried the following ways and it did not work:
Sum(OutboundPayment[OutboundPayment/PaymentStatus/Code=’ISSUED’]/PaymentAmount /Value)
I tried another way and even this did not work:
decode(PaymentStatus/Code, 'VOID', ‘0’, PaymentAmount/Value*100)
Please help!!!!!!

Need help installing Control panel for Creative Roar speaker!!!

I am trying to download the control panel to my Windows XP PC, or my Windows 8 laptop but when I download the try to install the control panel both my PC & laptop says, Setup unable to detect a supported product on your system. What does that mean?

hiawa23,
You need to press and hold the PLAY button to activate the sound card feature. You may refer to this article for more information.
You can also do the following if your PC is still unable to detect the speaker as a USB audio device:
1. Ensure you use the supplied USB cable. It is able to handle both power and data.
2. Power cycle the speaker (turn off and then turn it on)
3. Connect the speaker to another USB port and try again.
4. Do not use any USB hub; ensure the speakers is connected directly to your PC
5. Try to connect the speakers to another computer and then try again.
If the speaker is still not detected as a USB audio device, perform the following:
1. Hardware reset: In any state, press and hold the Power button for more than 10 seconds, and then press the Power button again to turn the speakers on.
2. Master reset: While the speaker is in pairing mode, press and hold the Multifunction and Volume down (-) button together until a voice prompt is heard that 'master reset' is completed.
Cheers,
Colin-CL

Needs to be control S_GUI auth.

Similar Messages

Maybe you are looking for