Negative values should not be allowed for fields

Hello Gurus,
I have a table and right now the feilds f1 and f2 are allowing negative values to be stored as they are of type char4, now that i dont want those feilds to allow negative values. i am using these feilds in the feild catalog in the ALV as a result when the coloumn is editable, the user may enter negative values, which i dont wnat to allow it now. what will be hte best possible solution.
thanks in advance

Hello,
You can set this in the domain itself.
Please check this SAP documentation:
Output with sign: If fields that refer to this domain can contain negative values, the Sign flag must be set. When the field contents are output to the screen, the first output location is reserved for a sign. If the flag is not set but the field contains negative values, problems could occur when outputting to the screen. Entries can only made in this field for data types DEC, FLTP, QUAN and CURR.
BR,
SUhas

Similar Messages

Zero quantity should not be allowed for STO delivery

Hi,
     zero quantity should not be allowed for STO delivery.
     when i create a delivery for a STO it should not allow zero quantity
     can someone throw some light.
Alec

Hi,
Please maintain the "B - Create Delivery with qty greater than Zero" in Part.dlv./item in shipping tab page of the customer of site.
more briefly: in WB02 --> click on the customer of the site --> Shipping Tab page --> Maintain B (Create Delivery with qty greater than Zero)
Regards,
Srini

Inventory in storage bins should not be allowed to go negative

Hi
Inventory in storage bins should not be allowed to go negative?
Regards
Vivek

you can uncheck the "Allow negative stock" for the combination of warehouse and the storage type.
Path is-
SPRO > Logistics execution > Warehouse management > Stock removal startegies.
Then select your strategy.
Check out if it helps.
Regards,
nilesh

Purchase org. field entry should not be Mandatory for PR creation/release

Dear Experts,
When we are creating PR (ME51N), Purchase organization field entry is mandatory for few user id & in few user id this field is not mandatory. While we are creating PR by which user id, where purchase org. field entry is not mandatory (not fill purchase org. field) & release PR (ME54N) than system ask purchase org no.
Purchase organization field entry should not be mandatory for us when we are creating & release the PR for all user ID's. How can be maintain this things on all user ID's.
Please help us regarding this issue.
Thanks & Regards,
Shatrughan

Hi dear,
Do the following settings in SPRO,
SPRO->MATERIALS MANAGEMENT->PURCHASING->PURCHASE REQUISITION->DEFINE DOCUMENT TYPES.
Here check the Field selection Key for your document type.
Now go to
SPRO->MATERIALS MANAGEMENT->PURCHASING->PURCHASE REQUISITION->DEFINE SCREEN LAYOUT AT DOCUMENT LEVEL
Now double click on the field selection key which you have found earlier and now double click on Reference data,item and set the indocator as optional for Purchasing Organisation key.

PO Value should not exceed PR value ~ Control required

Hi All,
I wanted to make PR number has mandatory for PO, i did it with the help of customising settings with doc type.
Now I want to make PO Value should not exceeds the PR Value.
How to make it in settings. or Is thr ant way available to make it (like any User exit, Enancement).
Also can any one tell how to control(make with Doc type).Like only for direct PO, or only indirect PO.
Can anyone help me out to do so.
Regards,
Nagaraj S
Edited by: Nagaraj S on Sep 2, 2009 6:10 AM

Hi Nagraj,
The funcionality you are talking on - checking tolerance limits between
PReq and PO document - was developed for Public Sector, it uses
the values in the FMIOI table to perform the check. If the PReq does
not have an FM account assignment, no FMIOI record will be written and
the check cannot take place.
In order to assign tolerance key limit to PReq document type please
use following path:
Path is: SPRO -> Public Sector Management -> Functions for US Federal
Government -> Integration -> Materials Management ->
Document-to-Document Tolerances
I am not sure if something like this is there in normal case
regards,
Lalita

PO RELEASED IT SHOULD NOT BE ALLOWED TO AMMEND

Sir,
once po is released it is should not be allowed to edit.
how can i configure this
regards
amey

Hi Amey,
Once PO is released it cant be Changed it can be done by doing the following setting in SPRO.
SPRO>Material Management>Purcahsing->Purchase order->Release procedure for purchase order--->Define release Procedure for the PO
In this Release Stategy config there is option called Release indicator
where in we have to define a release ID and this release ID ( Eg A ) has to be given 1 cannot changeable in the feild in chagble--for the allowing no changes in PO after release and then we have to go to release Strategy option we can select the release strategy we want the change and in the Strategy
click on the release status and in this status we can give the ID defined earlier ( at which level what effect should come)
hope so it helps
regards
Anjanna.

PO values should not exceed PR values

Hello
PR value should proposed while creation of PO wr to PR, whenever Info records
are not mainatained and PO values should not exceed the defined limit
Regards
sapman

Hi,
You cann't restrict the PO value based on PR value, because the PO value is taken from Info record, Previous PO or Manual entry.
But PR value is from Material master or Manual entry.
Moreover PO value also includes other conditions like discounts/freight/duties etc on the net value so there is no fixed value for PO net price.
But PR will be always a fixed price means either from Material master or Manual entry based on the cost of the material.
So SAP has provided only qty restiction from PR to PO ( Message no. 06076)
but not for the PR value to PO value.
rgds
Chidanand

Production Order Usage Probability should not be allowed to change after GI

Dear Gurus,
pls tell me how to do this ,Production Order Usage Probability should not be allowed to change after Goods Issue (GI) done against Prod Order . pls tell me procedure or any UserEXit for this.
Thanks in Advance,
Regards,
Dev

Hi,
Can you elaborate little bit more?
Regards,
Sankaran

Error the entered value does not match the specified field type

Hi,
When I try to insert a null value to a field of the User Defined Table I am getting the error "The entered value does not match the specified field type" in SAP Business One version 2007 PL 42.
Any help would be appreciated.
Thanks in advance.
Sudha.

Hi Sudha,
It probably have to do with how you defined the field.
Is Null value allowed?
What are the field definitions?
Thanks,
Jesper

Pharma: shelf life with remaining 4 months should not be considered for planning

Hi,
Implementation in Pharma : FG Shelf life with remaining 4 months should not be considered for FG planning.
How to exclude this stock while planning for FG. FG planning is Make to stock.
BR
Subbu.

Hi,
Thanks to Caetano, Kumar & Mani..
We have achieved this with below with customized program....
Exclude those batches from MRP run whose difference between the (expiration date &
current date ) is less than or equal to its procurement time mention in MRP-2
view of material master.
Before running MRP, one need to execute the program with following option:
Input data will be plant, material type or list of material:
   System should execute following logic:
1) In a plant list all material with given material type
2) Execute the BAPI for find out the characteristic value of EXB_MRP from class
type 001of material class (BAPI_OBJCL_GETDETAIL_KEY)
3) If EXB_MRP = Y , then list out all such material.
4) For such a material identity those batches which are available in stock other
than ‘9999’
5) All such batches characteristic of shelf life expiry date need to be derived
from BAPI
6) Calculate ( Expiry Date - Today’s Date)
= Difference
PLIFZ ), batch of
the material will be transferred to the 9999 storage location which will be
excluded from MRP run.
PLIFZ ), batch of the material will be transferred
to the 9999 storage location which will be excluded from MRP run.
   7) Run the MRP on materials
   8) Transfer posting from 9999 storage location to original storage location :
Selection criteria
   On execution transfer the material back to required storage location.
BR
Subbu.

RESERVATION QUANTITY SHOULD NOT BE CONSIDERED FOR TRANSFER POSTINGS

Dear Gurus,
Reservation Quantity should not be considered for Stock Transfers or Transfer postings to Sub contractor.
movement type : 541 & 641
Example : Total Stock = 1200 nos. Reserved stock for production order = 1000 nos.
Currently our system allows stock transfers/transfer postings for reserved quantity also.
But we want the reserved quantity to be blocked and only free stock should be allowed for transfer postings.
(i.e 1200 - 1000 = 200 nos . Only 200 nos should be allowed for transfer postings)
Please suggest.

as per standard SAP reservation quantity will not stop the goods issue. resevation has no control on stock issue.
Try with abap development.

User should not be allowed to login 2 times to an application from same m/c

Hi Everyone,
I have to find all possible solutions to below problem:
Problem: User should not be allowed to login 2 times to an application from same machine.
Steps to produce the problem:
1) User 1 logins to application.
2) User 1 tries to login with different credentials from same machine.
3) User 1 should be presented with a message that he cannot login from same machine using 2 browsers.
4) User 2 tries to login to application with credentials of user 1. System should now display an alert to both users on System 1 and System 2 of this conflict.
Please share your thoughts regarding above problem.
Thank you
Edited by: rishab.garg on Feb 25, 2009 10:53 PM

When a user logs in to application flag it in database. Irrespective of client machine and browser when another user tries to login using same user id you will be able to identify that easily using stored flag against the user id.
If you want to distinguish between client machine for displaying different messages you can easily do this by comparing client IP address. To obtain client IP address use:
request.getRemoteAddr();Note that getRemoteAddr() might return last proxy machine's IP address (in case proxy is used) instead of client's machine. In that case you may consider using cookie (though using cookie is not a great idea).
Thanks,
Mrityunjoy
Edited by: mrityunjoy on 28 Feb, 2009 11:43 PM

Account 'Contra account: Acquisition value' could not be found for area 01

Hi, everyone!
I am practicing in T-code ABZON.
I created one asset and purchased it. When I use T-code ABZON to acquisition with automatic, I cannot post because it has error: Account 'Contra account: Acquisition value' could not be found for area 01.
How can I fix it? can you help me?
Thanks for advices.

Hi,
Please use T-Code AO90 which will open a screen asking you to enter Chart of Depreciation.
After entering the Chart of Depreciation (COD), select the COD and click on the Account Determination which will open up the list of Account Determination. Select the correct Account Determination for the asset for which you were getting the error and click on "Balance Sheet Accounts". You will get the Depreciation Areas. Click on Depreciation Area "01" which will display the "Contra account: Acquisition value". Give the correct G/L account to pass the Contra Entry.
regards,
Chintan Shah
Edited by: Chintan Shah on Jun 24, 2010 8:24 AM

The server farm account should not be used for other services

I have created a new SharePoint Foundation 2013 Farm. I only used the Farm Configuration Wizard to create the Search Service Application, all other aspects of the Farm was created using PowerShell.
The SharePoint Health Analyzer is reporting the following error:
Title: The server farm account should not be used for other services.
Severity: 1 - Error
Category: Security
Explanation: DOMAIN\FARM_ACCOUNT, the account used for the SharePoint timer service and the central administration site, is highly privileged and should not be used for any other services on any machines in the server farm. The following services were
found to use this account: Distributed Cache Service(Windows Service)
Remedy: Browse to
http://centraladminsite:port/_admin/FarmCredentialManagement.aspx and change the account used for the services listed in the explanation. For more information about this rule, see "http://go.microsoft.com/fwlink/?LinkID=142685".
Now I understand how to change the account used to run the Distributed Cache Service, but my query is what account should I use in the least privelage model? I have setup the following 6 accounts as per TechNet guidelines (Link)
and am not sure if one of these accounts should be used or if another account is required:
SQL Server service account
Setup user account
Server farm account
SharePoint Server Search service account
Default content access account
Application pool identity
After reviewing the TechNet article again, I don't fully understand the section titled "Service application accounts". Is the article advising me to create a seperate account for each row in the table? e.g. 1 account for Business Data Connectivity
Service, a different account for "Application Discovery and Load Balancer Service", another account for "App management" and another account for "Distributed Cache", so 4 extra accounts if I choose to install all of these services
within the Farm?
Also, what does the article mean when it says "Plan one set of an application pool and proxy group for each service application that you plan to implement."? How do I go about doing this?
Kevin Evans

After reviewing the TechNet article again, I don't fully understand the section titled "Service application accounts". Is the article advising me to create a seperate account for each row in the table? e.g. 1 account for Business Data Connectivity Service,
a different account for "Application Discovery and Load Balancer Service", another account for "App management" and another account for "Distributed Cache", so 4 extra accounts if I choose to install all of these services within the Farm?
Inder: Yes, It is suggested to have multiple service account for each service application. This increases security and dependencyof 1 account on multiple Service applications. Like below
SQL Server service
Local System account (default)
Setup user
Member of the Administrators group on the local computer
Server farm
Network Service (default)
No manual configuration is necessary.
SharePoint Server Search Service
By default, this account runs as the Local System account.
If you want to crawl remote content by changing the default content access account or by using crawl rules, change this to a domain user account. If you do not change this account to a domain user account, you cannot change the default content access account
to a domain user account or add crawl rules to crawl this content. This restriction is designed to prevent elevation of privilege for any other process running as the Local System account.
Default Content Access
No manual configuration is necessary if this account is only crawling local farm content. If you want to crawl remote content by using crawl rules, change this to a domain user account, and apply the requirements listed for a server farm.
Content Access
Same requirement as the default content access account.
Profile import Default Access
Same requirements as server farm.
Excel Services Unattended Service
Must be a domain user account.
http://technet.microsoft.com/en-us/library/cc263445%28v=office.15%29.aspx
Also, what does the article mean when it says "Plan one set of an application pool and proxy group for each service application that you plan to implement."? How do I go about doing this?
Inder: Each service account has a application pool and you can plan to use same application pool for multiple
service accounts if required. These application pool are then consumed by proxy connection
of each service application. On service application pool, you can see all the service applications and its proxy connection.
If this helped you resolve your issue, please mark it Answered

ORA-10631: SHRINK clause should not be specified for this object

Hi
I was trying to shrink table to reset the high water mark but some unknown reason it failed.
Please help me
SQL> declare
stmt varchar2(100);
cursor cur is
select object_name from user_objects where substr(object_name,1,1)='A'
and object_type='TABLE';
begin
for i in cur loop
stmt :='alter table '||i.object_name ||' shrink space';
execute immediate stmt;
end loop;
END;
declare
ERROR at line 1:
ORA-10631: SHRINK clause should not be specified for this object
ORA-06512: at line 9
Regards
Jewel

http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_3001.htm#CJA
The shrink clause lets you manually shrink space in a table, index-organized table or its overflow segment, index, partition, subpartition, LOB segment, materialized view, or materialized view log. This clause is valid only for segments in tablespaces with automatic segment management. By default, Oracle Database compacts the segment, adjusts the high water mark, and releases the recuperated space immediately.
Compacting the segment requires row movement. Therefore, you must enable row movement for the object you want to shrink before specifying this clause. Further, if your application has any rowid-based triggers, you should disable them before issuing this clause.

Negative values should not be allowed for fields

Similar Messages

Maybe you are looking for