Netweaver Upgrade with EPHI - PostProcesing - Sintax error
HI Experts
Im using EPHI to upgrade my BI 7.0 SPS20 to BI EHP1 SPS5. After reach the POSTPROCESSING step,
the tool ask to run SPAU check on the system.
When i execute it SPAU load, but when i try to Reset to original any obj ( i have 2 reset ) the system
dumps with the following sintax error :
" Runtime Errors SYNTAX_ERROR
Date and Time 02.10.2009 23:00:34 "
Short text :Syntax error in program "CL_I18N_BIDI==================CP"
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_GUI_ALV_GRID===============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_I18N_BIDI==================CP " in include
"CL_I18N_BIDI==================CCAU " in
line 2: A class already exists with the name "LCL_UNITTEST_I18N_BIDI".
I check the logs in .../abap/log/ for ADJ errors but all the seems to be OK (no errors or warnings).
Could you kindly give some advices, Please
Daniel
Edited by: Daniel Ayarza on Oct 3, 2009 3:38 AM
FULL DUMP
Runtime Errors SYNTAX_ERROR
Date and Time 02.10.2009 23:00:34
Short text :Syntax error in program "CL_I18N_BIDI==================CP"
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_GUI_ALV_GRID===============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_I18N_BIDI==================CP " in include
"CL_I18N_BIDI==================CCAU " in
line 2:
"A class already exists with the name "LCL_UNITTEST_I18N_BIDI"."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "CL_GUI_ALV_GRID===============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
The following syntax error was found in the program
CL_I18N_BIDI==================CP :
"A class already exists with the name "LCL_UNITTEST_I18N_BIDI"."
Trigger Location of Runtime Error
Program CL_GUI_ALV_GRID===============CP
Include CL_GUI_ALV_GRID===============CM05S
Row 1
Module type (METHOD)
Module Name CHECK_FOR_BIDI_FLAG
Source Code Extract
Line SourceCde
>>>>> method CHECK_FOR_BIDI_FLAG.
2
3 check CL_I18N_BIDI=>BIDI_CTRL_CODES_ACTIVE eq abap_true.
4
5 data: fcat type lvc_s_fcat,
6 bidi type lvc_s_bidi_flag,
7 ret type i.
8
9 clear mt_bidi_flag.
10
11 loop at m_cl_variant->mt_fieldcatalog into fcat.
12 check not fcat-dd_roll is initial.
13
14 bidi-fieldname = fcat-fieldname.
15 CALL METHOD cl_i18n_bidi=>get_bidi_flags
16 EXPORTING
17 im_dtel = fcat-dd_roll
18 IMPORTING
19 EX_LTR_FLAG = bidi-ltr
20 EX_FILTER_FLAG = bidi-filter
Similar Messages
-
EJB QL with cmr field sintax error
Hello I have some EJBs related to some tables .
In particular I have 2 EJB with follow schema and relathionship:
EJB_T (n)<----------------------->(1) EJB_C
So I have the CMR field in EJB_C named transactions
THE query
SELECT OBJECT(trans) FROM EJB_C_NAME AS c, IN (c.transactions) AS trans WHERE c.id = ?2 AND trans.data >= ?1
It seems all ok but embeded OC4J (1.3.1) don't deploy application and throw an Exception related to QUERY PARSING .
can anyone help me ? please.
thanks in advanceOC4J used is 10g
-
My iPod touch is not recognized by Windows 7 and will not appear on My Computer as a storage device after OS 5.1.1 upgrade and received an 1602 error. My iPod is now having a connect to iTune screen.
Error 1600, 1601, 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
http://support.apple.com/kb/TS3694#error1602 -
Execution of Reports phase error during SAP EHP4 upgrade with EHPi
I started getting an error message in the "Execution of reports after put" phase
(within the Downtime phase) during the SAP EHP4 upgrade with Enhancement
Package Installer.
***** LIST OF ERRORS
AND RETURN CODES *****
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~XPRA ERRORS and RETURN CODE in SAPRB70104.OPQ
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~1AETR012XProgram terminated (job: "RDDEXECL", no.: "09064300") Long
text: Cause Program "&V#&", which was started in the background, was
terminated abnormally. System Response The system created a job log for
the terminated program. What to do Proceed as follows: Log onto the
system in which the program was executed. The system is specified at the
beginning of the transport log. Then call transaction SM37 to display the
job log. Enter "&V#&" as job name and "DDIC" as user name. Restrict the
starting date to the starting date specified in the transport log. For
the other selection criteria, select only jobs with the status
"cancelled". Then press <LS>Execute</>. A list of the jobs satisfying the
selection criteria is displayed. You can display the log by pressing
<LS>Job log</>. If the list contains several jobs, you can select the job
with the ID " &V#&" with <LS>Display</> -> <LS>Job details</> or define
further details for the selection criteria in the initial screen of
transaction SM37. If the ABAP processor reports cancellation,
double-clicking on the corresponding message in the job log branches to
the display of the corresponding short dump. 1AEPU320 See job
log"RDDEXECL""09064300""OPQ" 1 ETP111 exit code : "12" >>> PLEASE READTHE REPORT DOCUMENTATION OF THE REPORTS MENTIONED ABOVE <<< XPRAs are
application reports that run at the end of an upgrade.
Most XPRA reportshave a report documentation that explains what the report does and how
errors can be corrected. Call transaction se38 in the SAP system, enter
the report name, select 'Documentation' and click the 'Display' button.
>>> The problematic XPRAs are mentioned in messages of type PU132 above
<<<
I tried to follow the instructions in note 1269960, but the enhancement spot
CLASSIFICATION_TOOL was already active. I activated it again and reran the phase
but got the same error. Also, I couldn't implement the note using SNOTE because it is
the middle of the upgrade process.
I also found the following long text in ST22
"Internal error during syntax check: ("//bas/710_REL/src/krn/gen/scsymb.c#11"
Processing had to be terminated because an internal error
occurred when generating the ABAP/4 program
"CL_CLS_BADI_CHARACTERIZATION==CP".
The internal system error cannot be fixed by ABAP means only."
I am on a 64 bit System with CentOS Linux. 8 GB RAM, 250 GB HD with 20 GB free space.
So far, I could not find any information on this. Any help would be greatly appreciated!
Thanks,
VictorHi Victor,
Go to SM37 and put in the username as DDIC and see the job log.
Also check Sm50 and see whether you have BTC processes available.
Last but not the least check your filesystem space usage too.
Gerard -
After an earlier attempt to move Logic from my other mac (OSX 10.6.8) with the migration assistant to my new mac with OSX 10.8.2. I've re-started the whole start up process by erasing the hard drive from the new machine and build it up from scratch. After a new "out of the box" start, I decided to install LOGIC from my disks : starting with my 2007 package Logic Studio 8 and upgrading with my Logic 9 package from 2009. When trying to start to install 2008 I got the error message : Logic Studio.mpkg cannot be opened as the power pc programs are no longer supported.
What does this mean? HOw do I get this working under 10.8.2 as it works flawlessly under OSX 10.6.8. For sure I didn't buy a new machine to have OSX 10.8.2 but I suspect this is the roadblock to installing my logic package.
Help!Mark,
Sorry...
I completely lost the thread (I actually got confused between you and another poster on a another forum that was asking the same basic question) and somehow ended up thinking you were trying to install on a PPC Mac
My apologies and please ingnore those parts of my last post relating to the PPC Macs...
You have an Intel Mac and therefore Logic Studio 2 Boxed Upgrade set should install/run on your Mac without issue. As I said earlier.. you do not need to try and install from the original Logic Studio 1 /Logic 8 Boxed set...(It won't work anyhow because you have an Intel Mac and that version had a PPC installer) but just install from the Logic Studio 2 / Logic Pro 9 Upgrade Boxed setof DVDs instead...
Have you tried the "Make Disk Image" solution I gave earlier? That normnally works under such circumstances as what you are describing can happen when your DVD drive cannot read the DVDs correctly... I have had this situation myself where one drive read them okay and another failed to do so for whatever reason. Making and then installing from Disk images of those exact same disks resolved the issue for me...
You can try to reinstall directly from the DVDs of course though under some circumstances it may not allow you to reinstall Logic Pro itself if that part of the original installation attempt was successful... in which case you can also try this... (It's probably the easiest method if Logic 9 was already installed and present in your Apps Folder)
If the Logic Pro App is in your applications folder..
Run Software Updates to update Logic Pro to a version that will run under 10.8.2 (The initially installed version of Logic will not)
Run Logic
Go to the menu bar in Logic and select Logic Pro/Install Additional Content and select all content in there..
This content is basically exactly the same as what is stored on the remaining DVDs of the boxed set so you might not need to use the rest of the DVDs to install from but download it all instead from Apple Servers... -
I have unlocked my iphone and when tried to upgrade it, i got an error, so i restored it.But i was not able to activate my iphone 3gs now...it is showing a message like ' sim card not found'..please help me with this regard
Try popping out the SIM card and turn off the phone.
Pop in the SIM card once again and turn on the phone, make sure that the SIM card is placed and seated perfectly in the tray!
Tell me how did you unlock your phone!? -
NW 7.01 upgrade to 7.3 (BW) - Error: Unknown language short name Z2
Hello,
While upgrading a BW system to NW 7.3, in phase PREP_CONFIGURATION/LANG_SELECT I get the error:
Unknown language short name 'Z2'
and the upgrade cannot continue. The Z2 language is supplemented with English and is working properly in the system.
It is only used so that some BI reports to be presented in that language. It is not a correspodence language. Simulation in transaction i18n reports no errors.
Since no objects are translated in this language, I also thought to remove the language during the upgrade and import it after.
However, even this approach was not possible, since I do not get any screen in the upgrade GUI in order to be able to remove Z2 language. Also searched for Notes and in SDN, but no one seems to have faced such an issue.
The system is a standalone development NW 7.01 SPS 8 in Windows 2008 R2 SP1 with SQL 2008 R2 SP1.
Any help or ideas appreciated.
Thank you,
George.Hi Sunny,
I do not have any translations to save. Nevertheless, I exported the language before starting the upgrade with SMLT_EX.
I get the error and the upgrade stops. I do not get any screen to remove the language.
Regards,
George. -
Hello,
I've encountered issue during installation of SP1 to SQL Server 2012. After upgrade I'm getting this error in Event Log:
Script level upgrade for database 'master' failed because upgrade step 'msdb110_upgrade.sql' encountered error 537, state 3, severity 16. This is a serious error condition which might interfere with regular operation and the database will be taken offline.
If the error happened during upgrade of the 'master' database, it will prevent the entire SQL Server instance from starting. Examine the previous errorlog entries for errors, take the appropriate corrective actions and re-start the database so that the script
upgrade steps run to completion.
Can someone point me direction how I can fix it? This is a production server and currently only way to make it working is to use T902 flag in SQL Server startup params. I've found some suggestions to check Data path if it exists but it does so this is not
the issue here. Any ideas?
I've found also here
http://www.sqlservercentral.com/Forums/Topic1377073-1550-1.aspx#bm1378279
suggestions for similar issue with SQL Server 2008 which that I should do:
Via ssms:
From msdb:
Delete:
dc_admin role
Dc_operator role
Dc_proxy role
UlitityCMRReader role
UtilityIMRReader role
UtilityIMRWriter role
but for not I didn't tried it yet. This is standalone SQL Server instance.
Any help really appreciated.
RegardsScript returns the same error.
System databases:
1 1 760 -1 10 1048578 0 1 master C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\master.mdf
2 0 12768 -1 10 1048642 0 1 mastlog C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
1 1 1024 -1 10 1048578 0 2 tempdev C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\tempdb.mdf
2 0 64 -1 10 1048642 0 2 templog C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\templog.ldf
1 1 288 -1 128 2 0 3 modeldev C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\model.mdf
2 0 4464 -1 10 1048642 0 3 modellog C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\modellog.ldf
1 1 28936 -1 10 1048578 0 4 MSDBData C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\MSDBData.mdf
2 0 3352 268435456 10 1048642 0 4 MSDBLog C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\MSDBLog.ldf
are all in place where path shows.
Before sending my message I've searched update script for "FROM master.sys.master_files" and I found script which you are showing me. I've made some digging and when I runned:
SELECT physical_name
FROM master.sys.master_files
WHERE (name = N'master')
it returned also path to one my customers database name which has filename set correctly but it's Logical DB name is master and mastlog. I'm running shared hosting company and I allow my customers to restore their DBs from .bak files but I have no idea why
this customers logical name is set to master and mastlog. Probably when I change this names update script will work as it should. On the other hand in my opinion there should be some kind of fail safe mechanism for situations like this one.
EDIT: After changing logical name for DB and log for mentioned DB your script runned fine so probably now when I remove T902 flag and restart my SQL Server update will run correctly. Big thanks for resolving this issue. -
LKM SAP BW to Oracle (SQLLDR) generates sintax error in ABAP code.
Hi Experts,
We are installing a SAP BW KM's in ODI 11g.
Actually, we are able to make reverse ingeneering succesfully.
Now we want to use the LKM in order to extract SAP data.
The KM fails, in step Generate ABAP Code. The code is uploaded to SAP system but with sintaxis errors.
That's the beginning of the SAPAbapExecuteOpenTool_8001_7001.log.
+##################################################+
+############ Open Tool Logger ####################+
+##################################################+
+############ Upload value: 1+
+############ Execute value: 1+
+############ BASE RKM FLAG: 0+
+############ ZRFC_RUN_INSTALL: 1+
+############ Abap Function Name: ZODI_8001_7001+
+############ Sap Host Name: XXXXXXXX+
+############ Sap User Name: XXXX+
+############ Sap password: ********+
+############ Sap Client: 100+
+############ Sap language: ES+
+############ Sap system no: 00+
+############ Sap Connection Pool Name: SAP_ODI_LKM_POOL_GLOBAL+
+############ Sap Connection Pool Size: 10+
+############ Sap Function group name: ZODIBW_LKM_FGRP+
+############ File Delimiter:+
+############ File Name: ZODI_8001_7001.txt+
+############ FTP Host: XXXXXXXXX+
+############ FTP User: ftpbi+
+############ FTP Password: ********+
+############ FTP Passive Mode: 1+
+############ FTP Transfer Time out: 100000+
+############ User abap parameter names: IV_DELIMITER,CHAR1;IV_FILENAME,CHAR255;IV_USER,CHAR35;IV_PWD,CHAR35;IV_HOST,CHAR35;IV_HASHVALUE,CHAR35;IV_PATH,CHAR35;IV_REQUID_L,RSSID;IV_REQUID_H,RSSID+
+############ Abap rfc table parameters: RETURN,BAPIRETURN;ET_FILE_RETURN,BAPIRET2+
+############ Log File Name: /tmp/SAPAbapExecuteOpenTool_8001_7001.log+
+############ OpenHub Path: /tmp/+
+############ Delta Extraction First Request ID : 0+
+############ Delta Extraction Last Request ID : 0+
+############ SAP Development Class : ZODIBW_PCKG+
+############ Max Row Count :+
+############ Fetch Batch Size :+
+############ Hash Value Marker: HVM+
+############ Generated Program:+
*** ODS DSO extraction
TYPES: BEGIN OF ty_final,
+/BIC/AZOFI_UTE00_/BIC/ZFI_SOCOR+
TYPE
+/BIC/AZOFI_UTE00-/BIC/ZFI_SOCOR,+
+/BIC/AZOFI_UTE00_SOURSYSTEM+
TYPE
+/BIC/AZOFI_UTE00-SOURSYSTEM,+
END OF ty_final.
In the SAP GUI shows a sintaxis error.
Functions Module ZODI_8001_7001. line 25
The name "/BIC/AZOFI_UTE00_/BIC/ZFI_SOCOR" is longer that allowed.
+30 characters.+
Really the TYPE "/BIC/AZOFI_UTE00_/BIC/ZFI_SOCOR" has 31 characters.
The sufix "/BIC/" is the "NAMESPACE", a SAP grouping concept.
AZOFI_UTE00 is a table name.
ZFI_SOCOR is a column name.
Are this sufix correct in the APAP code?
Has anyone had that problem?
Any comment will be wellcome.
Thank's in advance.Hi Somchai,
r U able to resolve ur issue ..........i'm also struck there at the same point.
I am using shared folder for file transfer and my error message is
java.lang.RuntimeException: Error occured in open tool execute method...Error in executing ABAP program...Error in executing ABAP program...Error occurred when creating dataset\\<hostname>\bi-interface$\ZODI_11001_12001_GLOBAL.txt
Thanks.
Edited by: Drona on Mar 26, 2012 7:25 AM -
Trying to install Lightroom 5 with CC but getting error code 5 on initial startup of Lightroom. Have uninstalled all adobe products including Creative Cloud CC.
Followed the instructions on the forum by using the CC Cleaner App for OSX. Have restarted a number of times and even tried using disk utility to fix any permission probs. Still no luck.
The problem started happening from upgrading the previous version of Lightroom to the most up to date version. Im hoping someone can help me with any ideas. Thanks heaps.Ended up fixing the problem after finding no answers. Deleted the following file
com.adobe.acc.AdobeCreativeCloud.plist -
Sintax error depending database link used
Hi every one, I have a weird weird situation and I need some tips to deal with it.
A code like that:
declare
all variables;
begin
select xxxx
into vl_xxx
from t1@db_L1 a
, t2@db_L1 b
, t3@db_L1 c
where etc;
some stuff;
end;
WHY this kind of code could faisl with sintax errors: dbe_jobs_pkg.pr_eje_alm:26-04-2010 09:22 --> ast_codigo = 47:ORA-06550: line 69, column 14:
PL/SQL: ORA-00904: "A"."TABLESPACE_NAME": invalid identifier)
depending of the database link used. Indeed, if I execute de query in a isolated way (sql*plus for example) it works fine using the database link whose plsql fail
I garantee there is not grants problems...
By the way, the code begun to fails suddendly, and I don't know what happened....
All the databases are 9.2.0.5
I need sugestions to track o investigate the posible causes
Thanks a lot, kind regards
Mauricio Fernández C.
ADDENDUM:
I've restarted the source database and the PL/SQl with sintax error now works fine....Still I need some tips to understand what's going on.....
Edited by: maufer on 26-abr-2010 7:10Prashanth
my guess is that you can create the database link, which simply points to the remote instance. however, the problem is on the remote instance.
As the error message suggest, make sure that the listener is up and running on the remote machine. The link can be created, but if there is no listener on the other side, you will not get any response. -
Sintax error in COPA- Table T2580 does not exist or is not active
hi to all
i am doing configuration for T.C KES1 in CO-PA
while doing this i am getting SINTAX ERROR saying that T2580 DOES NOT EXIST OR IS NOT ACTIVE.
I checked with standard program this table is used by standard SAP PROGRAM
programe name SAPL0KEA
but this table contain no data
could please some help on this
v v urgentHi Hari,
This is a know issue in CO-PA. You need to apply three notes and the issue will be resolved.
Please run report RKEAGENV as described in the attached 64490.
If running report RKEAGENV will cause another error concerning operating concern E_B1 please copy the report ZJBREOFC from the correction in-
structions in the attached note 872175, activate and execute it.
If after applying note 872175 you receive a new short dump, please
execute report RKEAGENF to eliminate the error so that the program
RKEAGENV could then be executed without error and thus the characteris-
tic maintenance should work again.
Please also implement note 942785 into your system.
Regards,
Abhisek. -
Hello,
has someone be successful in upgrading oes servers with zcm11.1 linux package management
I tried to implement the process in the zcm11 docu (appendix) and all seems to go without errors after i installed yast2-firstboot additionally. But every try i made some rpm updates are left out.
We need to implent2 different upgrade paths:
1.) oes2sp2 (sles10sp3) to oes2sp3 (sles10sp4)
and all out test (without errors) did not update all rpms (neither sles nor oes) to the next level.
(check with oes-SPident)
2.) oes2sp2 to oes2sp3 (both sles10sp3) upgrade did also go without errors but still not all oes2sp2 rpms are on the sp3 level.
regards
Michaelmkoeppl,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com -
EHP7 Upgrade with kernel 740 Sp37
Hi All,
We have done successfully upgrade from ERP 6.0 to EHP6 sp09 and Now we have decide to go with EHP7 update fro two scenerios 1. From ERP 6.0 (kernel 700) to ERP6.0 EHP7 (Kernel 740) and 2 ERP 6.0 to EHP6 sp09 (kernel 721_EXT) to ERP6.0 EHP7 (Kernel 740). . here I have Two queries.
1. -----------------------------------------------------------------------------------------------------------------
EHP7 for ERP6.0 with SP03
In that Mopz proposed EHP7 for ERP6.0 SP03 is available only for support pack update only. It suggest the note 1949802 which I am not able to get as MOPZ is still generating valid XML to update ERP6.0 EHP7 sp03
EHP7 for ERP6.0 with SP02
It gives the kernel 740 patch SP27, I was reading some SCN discussions of kernel SP27 is having some bugs and gives issue during preprocessing phase and update will have to reset. So I want to use Kernel 740 SP37, so how to achieve this as Mopz is not giving the option to select the latest kernel. I am afraid to modify the stack.xml file.
2. --------------------------------------------------------------------------------------------------------------------
One more query is in phase Extraction I got error "the new SAP tools in /usr/sap/MES/SUM/abap/exe cannot connect to your database".
Which I believe is because of SSFS is not configured in source kernel. So question is how to configure this for Kernel 740 at this stage (after extraction).
SAP Note 1622837 says if your source kernel is 7.0x then two options --- option b says start with SUM and after error in Extraction Install SSFS with kernel 7.40 that is already unpacked. So how can I configure the SSFS with 740 as source system kernel is still running under 700
Please help.
Regards
SSHi Guys,
While in downtime phase MAIN_NEWBAS/XPRAS_AIMMRG we are getting below
error.
2EETW152 Cannot open file "/usr/sap/MES/SUM/abap/data/R-
XXX13INCTSPLGN.SAP".
# /usr/sap/MES/SUM/abap/log/SAPR740XPRA90000145.MES
I have gone through the "sap note 1978218 - CTSPLUG 200 SP10 Upgrade
fails"
and implemented the same report to get sp09 data and cofiles of CTS
plugin. Both files got generated successfully and are available in
/usr/sap/MES/SUM/abap/data
File names are R-20009INCTSPLUG.SAP & D-20009INCTSPLUG.SAP
And cofiles name is K-20009INCTSPLUG.SAP
Then I continued with upgrade but it still fails with the same message.
I dont know why stack xml calculated the sp10 patch for CTS_PLUG while we were already on sp10
Anybody has idea on this.
Regards
Sukhwinder -
46C- ECC6 upgrade with EHP4 SAP_BASIS package not found
We are executing an upgrade from 46C to ECC6 SR3 and binding in EHP4.
We have successfully downloaded EHP4 using Solution Manager MOPZ and
provided the generated "XML" file during the PREPARE.
During the phase EHP_INCLUSION, PREPARE is stopping with a message "No
matching SAINT package for 'SAP_BASIS' found".
The KB70102.SAR and KB70103.SAR packages from EHP4 have definitely been unpacked
and are available in /usr/sap/trans/EPS/in and we have prompted PREPARE to search EPS/in but it just returns to the previous error after searching.
It appears from the logs that the upgrade is expecting a "SAINT"
install package for SAP_BASIS and does not consider the KB70102/3
patches as acceptable?
Any clues as to why PREPARE is not accepting the SAP_BASIS packages and looking for a SAINT install?
Below is an excerpt from the EHP_INCLUSION.LOG
2 ETQ732 Package descriptions uploaded successfully
4 ETQ399 Looking for SAINT package for 'SAP_BASIS' ...
4 ETQ399 ... Read uploaded packages calling function module:
4 ETQ399 current: name = 'SAP_BASIS', release = '700'
4 ETQ399 patch type = 'U', ncvers-component = 'SAP_BASIS'
4 ETQ399 R3upReadNewPackages:
4 ETQ399 patchType='U', langVect='DEFS'
4 ETQ359 RFC Login to: System="CB1", Nr="00", GwHost="dbusrcb1", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "spda_read_new_packages" by RFC
4 ETQ399 ismovesVersion='0'
4 ETQ399 R3upReadNewPackages: exit: rc=0
4 ETQ399 ... No matching package found.
Regards,
Mike TarrOk, I was able to download the K-701DHINSAPBASIS package from Service Marketplace and this resolved the SAP_BASIS problem. Thank you Markus for this solution.
I also downloaded the SAP_ABA, SAP_BW, and the PI_BASIS components and unpacked those as well in /usr/sap/trans/EPS/in. My upgrade is now stuck asking for a SAINT package for SAP_ABA! I'm sure the SAP_ABA install, K-701DHINSAPABA, is unpacked and available in /usr/sap/trans/EPS/in.
The SAP_ABA files are definitely readable and there are entries in table PAT03_SDA for them.
I have a ticket open with SAP support but they have not had a solution yet for the SAP_ABA
Solution Manager failed to identify any of these packages as required in MOPZ.
I'm starting to wonder if anybody has ever done a 4.6C to ECC6 upgrade with EHP4 bound before?
Any ideas on the SAP_ABA would be appreciated. Here's a section of the EHP_INCLUSION.LOG file from PREPARE.
4 ETQ399 R3upReadNewPackages: exit: rc=0
4 ETQ399 Found: name = 'SAP_BASIS', release = '701', package = 'SAPK-701DHINSAPBASIS'
4 ETQ399 ... Matching package found: 'SAP_BASIS','701','SAPK-701DHINSAPBASIS'
4 ETQ399 (trc) R3upPatchDisassembleQueue: 1 package queue entries
4 ETQ399 (trc) R3upPatchDisassembleQueue: force=NO
4 ETQ399 (trc) R3upPatchDisassembleQueue: 0 packages will be disassembled
4 ETQ399 ... ... INST/UPG SAINT decision ok
4 ETQ399 ... EhP component SAP_ABA, 701
4 ETQ399 Looking for SAINT package for 'SAP_ABA' ...
4 ETQ399 ... Read uploaded packages calling function module:
4 ETQ399 current: name = 'SAP_ABA', release = '700'
4 ETQ399 patch type = 'U', ncvers-component = 'SAP_ABA'
4 ETQ399 R3upReadNewPackages:
4 ETQ399 patchType='U', langVect='DEFS'
4 ETQ359 RFC Login to: System="CB1", Nr="00", GwHost="dbusrcb1", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "spda_read_new_packages" by RFC
4 ETQ399 ismovesVersion='0'
4 ETQ399 R3upReadNewPackages: exit: rc=0
4 ETQ399 ... No matching package found.
4 ETQ010 Date & Time: 20090511150018
Maybe you are looking for
-
Help with inserting dynamic images in BI Publisher
Hi everyone, I know that this question has been asked a million times but most of the answers and examples that I found online seem so old and dated and none of them work. I placed an image in my Word document. I right-clicked on it and clicked on 'F
-
Unable to display the ClobDomain value in adf table
Hi , I have a database table whose column is Clob. Accordingly the Entity Attribute and VO attribute are of type. oracle.jbo.domain.ClobDomain Now this VO is wired as a ADF Table in jsff page. I am setting the value programmatically inside the AM by
-
Package javax.microedition.midlet does not exist
Hi: I am trying to run the Currency Converter MIDlet. I am using SUnONE4. I have got all the updates for the SUN ONE. When I compile the Converter directory.. i get the following errors.. which indicate that it can't find the javax.micoredition..pack
-
Key commands not showing up in KC window
Today I decided to attempt to get to the bottom of this problem. Since installing 7.1 my key commands are next to useless in terms of having the assigned commands show up in the key command window. Some of the commands show up when the relevent key i
-
Trouble with getting document to print full A4 size
I want to print a Word document converted to pdf. But in the adobe preview before printing I see the bottom has a shaded in area which no matter what size i try or setting the sahde remains and the printout ends up higher up on th epage..What can I