Network connection Failure:

this error comes up at start up then intermittently, internet connection works fine, not other apparent networks active, looking to see how I can identify which network item the computer thinks is failing.
I have tried using network preferences to de-activate all other networks except the airport connection, to no avail
Originally this was a stand alone computer running on Airport Extreme, now running in a network with internet connection coming from wireless Time machine and the airport express used to run the wireless printer on the network

First thing to check.....
Temporarily, turn off the wireless security on the AirPort Extreme to see if the Smart TV can connect that way.
If it can connect this way....then you know that you have a wireless security settings compatibility issue. The AirPort uses WPA2 Personal by default, so make sure that the TV is set to use WPA2 security.
If that does not work, try the WPA/WPA2 setting on the AirPort Extreme. This is a more compatible setting, but it is less secure than WPA2. You want to use WPA2 if at all possible.
However......If the TV cannot connect to the network with no wireless security, it is not hard to figure out that it will never connect with wireless security applied, so more troubleshooting will be required.
Make sure that the name of the AirPort Extreme network uses only letters and numbers....with no special characters like an apostrophe, dollar sign, asterisk etc.
Keep the name of the network short....nor more than 20 characters....10 or 12 would be better.
No blank spaces in the network name.
Same guidelines for the wireless password....short, no special characters, no blank spaces.
If still no luck, I'm stumped.

Similar Messages

Network Connection Failures Affecting Printing and Finder Access

I have a Canon MX320 connected via USB to my iMac running OSX 10.9.1. The latest Canon printer drivers are installed. Everything works fine with this printer and computer combination. The printer is enabled for shaing over the network.
The problem is that occasionally, the iMac seems to disconnect from any other laptop or desktop computer (Macs or PCs) connected through my wireless router. On a mac laptop (also with OSX 10.9.1) I may lose access to shared directories on the iMac, and more often, I lose the ability to print from the laptop. The print queues are unchanged on all Macs, but remote printing over the network fails with the message "printer not connected", even though the only change may have been that the iMac hosting the printer went to sleep.
Sometimes, waking the iMac allows the network print job to go through, but typically not if the print job is initiated before waking the iMac. The printer queue on the laptop will seem fine, with "printer idle", but as soon as the print job is submitted, it briefly reports "looking for printer", and then "printer not connected". Sometimes, everything (iMac and laptop) needs to be rebooted to re-establish a network printing connection through the iMac.
Trying to reset or delete and re-install the printer queue on the laptop does not fix the problem. I am assuming that this is because the remote connection to the server (the iMac) has effectively been interrupted or lost. The iMac may show up in a Finder window on the laptop as a simple PC icon, but with none of the connected directories visible. trying to re-mount the remote directories by connecting to the "server" (the iMac) often fails. It is as if something has happened to break the connection to the iMac, and both Finder and network printing are thereby disabled until everything is rebooted.
Printer error log entries:
E [13/Feb/2014:08:21:43 -0500] Unknown directive BrowseOrder on line 9 of /private/etc/cups/cupsd.conf.
E [13/Feb/2014:08:21:44 -0500] Unknown directive BrowseAllow on line 10 of /private/etc/cups/cupsd.conf.
This problem is intermittent but seems to be happening often after the Mavericks upgrade. One should not have to wake up a remote computer prior to connecting to it, or asking a printer connected to it to print a job.

Hello Rescue_2003
Check to see if Wake for network access is checked in System Preferences > Energy Saver.
OS X Mavericks: Share your computer’s resources when it’s in sleep
http://support.apple.com/kb/PH14244
Regards,
-Norm G.

MS word "network connection failure"

We have eight imacs(one month to 4 years old) running OS 10.4 or 10.6
connected to an admittedly old mac server on which all documents are
saved, no documents are saved on local macs. Each mac has MS Word
2008 installed. Several network users are experiencing the following
behavior. They create a document in Word and save, then edit and save
again. When they try to save the second or third time the above error
appears. Yet, they can still open other documents from the server, or
copy the document to the local desktop and then after delete the
earlier copy from the server, copy it to the server. Any thoughts on
what might be causing this intermittent problem. All other network
services are functioning normally. Thanks for any help.

First thing to check.....
Temporarily, turn off the wireless security on the AirPort Extreme to see if the Smart TV can connect that way.
If it can connect this way....then you know that you have a wireless security settings compatibility issue. The AirPort uses WPA2 Personal by default, so make sure that the TV is set to use WPA2 security.
If that does not work, try the WPA/WPA2 setting on the AirPort Extreme. This is a more compatible setting, but it is less secure than WPA2. You want to use WPA2 if at all possible.
However......If the TV cannot connect to the network with no wireless security, it is not hard to figure out that it will never connect with wireless security applied, so more troubleshooting will be required.
Make sure that the name of the AirPort Extreme network uses only letters and numbers....with no special characters like an apostrophe, dollar sign, asterisk etc.
Keep the name of the network short....nor more than 20 characters....10 or 12 would be better.
No blank spaces in the network name.
Same guidelines for the wireless password....short, no special characters, no blank spaces.
If still no luck, I'm stumped.

Networking/connection failure using generic connectivity with paradox databases

I tried to establish a connection from our Oracle 8i-Server
(Rel. 8.16 ) to a remote paradox-database via a database-link
and a data-direct 4.0 paradox-odbc-driver. For testing purposes
I set up a agent initialization file for a agent called hsodbc
according to the distributed-database documentation and I also
used the same parameters as in the documentation. If I try to
test the Net8-Connection an ORA-03113-Error occurs.
The entries in the agent-initialization file and in the
tnsnames/listener.ora are ...
...Agent-Initialization File Inithsodbc.ora
#Agent-Initialization File Inithsodbc.ora
# This is a sample agent init file that contains the HS
parameters that are
# needed for an ODBC Agent.
# HS init parameters
HS_FDS_CONNECT_INFO = hsodbc
HS_FDS_TRACE_LEVEL = ON
HS_FDS_TRACE_FILE_NAME = HS.Log
# Environment variables required for the non-Oracle system
#set <envvar>=<value>
#DataDirect 4.0 ParadoxFile (*.db);
...listener.ora
# LISTENER.ORA Network Configuration File: C:\Oracle\Ora_Serv_816
\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = pdv0570)(PORT = 1521))
CONNECT_TIMEOUT_LISTENER = 0
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = hsodbc)
(ORACLE_HOME = C:\Oracle\Ora_Serv_816)
(PROGRAM = hsodbc)
(SID_DESC =
(GLOBAL_DBNAME = MEDAS.PDV0570.MED.UNI_DUESSELDORF.DE)
(ORACLE_HOME = C:\Oracle\Ora_Serv_816)
(SID_NAME = MEDAS)
# This is a sample listener.ora that contains the NET8
parameters that are
# needed to connect to an ODBC Agent - but makes an ORA-03113-
Error if i check the
# Net8-Connection
and in the tnsnames.ora...
# TNSNAMES.ORA Network Configuration File: C:\Oracle\Ora_Serv_816
\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
# This is a sample tnsnames.ora that contains the NET8
parameters that are
# needed to connect to an default generic connectivty ODBC Agent
HSODBC =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = pdv0570)(PORT = 1521))
(CONNECT_DATA =
(SID = hsodbc.pdv0570.med.uni_duesseldorf.de)
(HS = OK)
#...new service created after setup of new database MEDAS with
setting db_domain
#...ATTENTION - use full service name with domain qualifier for
sqlplus-login
MEDAS.PDV0570.MED.UNI_DUESSELDORF.DE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = pdv0570)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = MEDAS.PDV0570.MED.UNI_DUESSELDORF.DE)
Do you have any suggestions how to fix the problem - and meny
thanks in advance.
Andreas

Please contact Oracle support for this issue.
Ensure that you are using an ODBC driver that meets the
requirements listed in the documentation.
Also double check that the ODBC driver is configured correctly.

Getting "Network Connection Failure 903" *only* when connecting from a LAN with a similar setup

Hello there, We recently bought a WD My Cloud EX2100 for family storage and we're quite happy with it. We configured the Android mobile app and it works perfectly either in the local network, from the WiFi at work or from the 4G networks in our smartphones. However, we live in two houses with very similar network configurations (same IP range, same IPs assigned to similar devices, e.g. 192.168.1.1 is the router in both places and 192.168.1.254 are other network gadgets, specifically at one house the WD NAS device, and at the other a WiFi repeater). The problem is that at the house with the WiFi repeater in the same IP address as the NAS in the other house, we cannot use the Android or Windows apps to connect to My Cloud services. Everywhere else, it works just fine, but not there. I believe it's wrongly detecting the network as the home network for the NAS device and tries to connect through 192.168.1.254 (haven't had the time to test this though). Have you had any similar issues? What can I do to fix this? Is there any documentation on it? Thanks! Best regards,José Devezas

I have checked it and the issue really is the local network with a similar configuration. I disconnected the WiFi repeater using the same IP address as the NAS on the other network and it worked just fine. It's quite a stupid bug, that needs fixing.

Network connection failures

lately, I've noticed that my macbook pro is getting disconnected from my wifi network. it got so bad that I had to create a new network profile to fix the issue. I have been noticing that my Nexus 7 sometimes says that is is 'obtaining IP address' ... but I usually need to reboot my router... is this a dying router or is it just my Mac?

I spoke to google tech support, and they thought my nexus 7 was the issue, not the router, but in the mean time, the issue went away on its own. if I have this problem again, I would most likely get a wifi modem from AT&T since my existing DSL modem is from 2004 (its a speedstream 5100 and it was sent to me in june 2004). would that be the best option, or would you suggest just getting a new router?

4.2 Update Failure. "The network connection timed out"

After downloading 4.2 just before installation the error message pops up:
"The was a problem downloading the software for the iPhone "XXX". The network connection timed out.
Make sure your network setting are correct and your network connection is active, or try again later"
This happens on different machines in different locations (IPs).
What is it and to fix it???

I have had the same problem trying to update to 4.3 on both my iphone 4 and my kids' ipod touches. The problem seems to come after the huge 400-700MB downloads when itunes extracts the software or verifies the download with Apple. This is what seems to get blocked by the firewall.
Turning off Kaspersky Internet security for the duration of the software download and update sorted the problem.
I could not find a different solution. Once it is completed then you can re-enable your security software.
If you are really paranoid about turning off your security software then I guess you will need to mess around with the firewall settings to allow itunes free access through the firewall but it may take some trial and error.

I'm having strange random connection failures. Are there ineffieciency in my config?

I've been having strange, random connection failures and I'm trying to eliminate possible causes.
What happens is while I'm browsing on the net over wifi, a link will at random not connect to the site, but instead fault to the ISP error page. It happens with highly reliable sites like google, or ebay, or whatever. If I direct connect to the cable modem, the problem site is immediately available.
I'm sitting <6 feet from a 871W router (with antenna). There's one router in my building and others are at my neighbors.
Below is the conf file. Just to imagine how rediculious this problem is, here's a screen shot from a web page. This shows a web page I visited, and after clicking on a link (an embedded youtube video), the error showed up within the page itself.
Why would only some URLs fail to connect? Is there inefficiencies in my config?
    Building configuration...
    Current configuration : 4750 bytes
    version 12.4
    no service pad
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname TooterTurtle
    boot-start-marker
    boot-end-marker
    logging buffered 51200 warnings
    no logging console
    aaa new-model
    aaa authentication login default local
    aaa authorization exec default local
    aaa session-id common
    clock timezone NewYork -5
    clock summer-time NewYork date Apr 6 2003 2:00 Oct 26 2003 2:00
    dot11 syslog
    dot11 ssid TooterTurtle
       vlan 2
       authentication open
       authentication key-management wpa
       guest-mode
       wpa-psk ascii 0 [my wifi password]
    no ip source-route
    no ip gratuitous-arps
    ip cef
    no ip dhcp use vrf connected
    ip dhcp excluded-address 192.168.10.1 192.168.10.10
    ip dhcp excluded-address 10.0.0.1 10.0.0.10
    ip dhcp pool vlan1
       import all
       network 192.168.10.0 255.255.255.0
       dns-server 192.168.10.1
       default-router 192.168.10.1
       domain-name Ethernet
    ip dhcp pool vlan2
       import all
       network 10.0.0.0 255.255.255.0
       domain-name WiFi
       dns-server 10.0.0.1
       default-router 10.0.0.1
    ip dhcp pool MrWizard
       host 192.168.10.100 255.255.255.0
       hardware-address 0011.0917.66fa
       client-name MrWizard
    ip dhcp pool MasterShake
       host 192.168.10.101 255.255.255.0
       hardware-address 0022.681c.fbcc
       client-name mastershake
    ip auth-proxy max-nodata-conns 3
    ip admission max-nodata-conns 3
    no ip bootp server
    ip domain name mydomain.com
    ip ddns update method ccp_ddns1
     HTTP
      add [zone edit account and url]
      remove [zone edit account and url]
    username admin privilege 15 secret 5 [encrypted secret]
    archive
     log config
      hidekeys
    no ip ftp passive
    ip ssh version 1
    bridge irb
    interface FastEthernet0
     description AdminInterface
    interface FastEthernet1
     description MrWizard
    interface FastEthernet2
     description Belkin
    interface FastEthernet3
    interface FastEthernet4
     description ComcastCableModem
     ip address dhcp
     ip verify unicast source reachable-via rx allow-default 100
     no ip redirects
     no ip unreachables
     no ip proxy-arp
     ip nat outside
     ip virtual-reassembly
     speed auto
     full-duplex
    interface Dot11Radio0
     no ip address
     no ip redirects
     no ip unreachables
     no ip proxy-arp
     encryption vlan 1 mode ciphers tkip
     encryption vlan 2 mode ciphers tkip
     ssid TooterTurtle
     speed basic-1.0 basic-2.0 basic-5.5 basic-6.0 basic-9.0 basic-11.0 basic-12.0 basic-18.0 basic-24.0 basic-36.0 basic-48.0 basic-54.0
     station-role root
    interface Dot11Radio0.1
     description TootersWiFi
     encapsulation dot1Q 2
     no cdp enable
     bridge-group 2
     bridge-group 2 subscriber-loop-control
     bridge-group 2 spanning-disabled
     bridge-group 2 block-unknown-source
     no bridge-group 2 source-learning
     no bridge-group 2 unicast-flooding
    interface Vlan1
     description EthernetOnly
     no ip address
     no ip redirects
     no ip unreachables
     no ip proxy-arp
     ip nat inside
     ip virtual-reassembly
     bridge-group 1
    interface Vlan2
     description WiFiOnly
     no ip address
     bridge-group 2
    interface BVI1
     description EthernetOnly
     ip address 192.168.10.1 255.255.255.0
     ip nat inside
     ip virtual-reassembly
    interface BVI2
     description WiFiOnly
     ip address 10.0.0.1 255.255.255.0
     ip nat inside
     ip virtual-reassembly
    ip forward-protocol nd
    ip route 0.0.0.0 0.0.0.0 FastEthernet4
    ip http server
    ip http authentication local
    no ip http secure-server
    ip http timeout-policy idle 60 life 86400 requests 10000
    ip dns server
    ip nat inside source list 101 interface FastEthernet4 overload
    ip nat inside source list 102 interface FastEthernet4 overload
    ip nat inside source static tcp 192.168.10.100 80 interface FastEthernet4 80
    ip access-list extended vlan1
     deny   ip 10.0.0.0 0.0.0.255 any
     permit ip any any
    access-list 100 permit udp any any eq bootpc
    access-list 101 permit ip 192.168.10.0 0.0.0.255 any
    access-list 102 permit ip 10.0.0.0 0.0.0.255 any
    no cdp run
    control-plane
    bridge 1 protocol ieee
    bridge 1 route ip
    bridge 2 protocol ieee
    bridge 2 route ip
    line con 0
     no modem enable
    line aux 0
    line vty 0 4
     transport input telnet ssh
     transport output telnet ssh
    scheduler max-task-time 5000
    end

I removed the ip router 0 0 to no great effect, which I consider to be a win.
I'm guessing that since overload is what--I understand--translates the one outside to the many inside IPs, that the suggestion to have only one overload configured means I should combine the two ip ranges into one.
I deleted 10.0.0.0 network. Changed the bridge references to 1 and vlan references to 1. Now wifi and ethernet should all be using the same internal network? That's the idea, right? Any more fat?
[EDITED]
dot11 syslog
dot11 ssid TooterTurtle
   vlan 1
   authentication open
   authentication key-management wpa
   guest-mode
   wpa-psk ascii 0 [my passphrase]
no ip source-route
no ip gratuitous-arps
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.10.1 192.168.10.10
ip dhcp pool vlan1
   import all
   network 192.168.10.0 255.255.255.0
   dns-server 192.168.10.1
   default-router 192.168.10.1
   domain-name Ethernet
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
no ip bootp server
ip domain name [my url]
ip ddns update method ccp_ddns1
HTTP
add http:...[zoneedit]
remove http:[zoneedit]
no ip ftp passive
ip ssh version 1
bridge irb
interface FastEthernet0
description AdminInterface
interface FastEthernet1
description MrWizard
interface FastEthernet2
description Belkin
interface FastEthernet3
interface FastEthernet4
description ComcastCableModem
ip address dhcp
ip verify unicast source reachable-via rx allow-default 100
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly
speed auto
full-duplex
interface Dot11Radio0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
encryption vlan 1 mode ciphers tkip
ssid TooterTurtle
speed basic-1.0 basic-2.0 basic-5.5 basic-6.0 basic-9.0 basic-11.0 basic-12.0 basic-18.0 basic-24.0 basic-36.0 basic-48.0 basic-54.0
station-role root
interface Dot11Radio0.1
description TootersWiFi
encapsulation dot1Q 2
no cdp enable
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Vlan1
description EthernetOnly
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat inside
ip virtual-reassembly
bridge-group 1
interface BVI1
description EthernetOnly
ip address 192.168.10.1 255.255.255.0
ip nat inside
ip virtual-reassembly
ip forward-protocol nd
ip http server
ip http authentication local
no ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip dns server
ip nat inside source list 101 interface FastEthernet4 overload
ip nat inside source static tcp 192.168.10.100 80 interface FastEthernet4 80
ip access-list extended vlan1
permit ip any any
access-list 100 permit udp any any eq bootpc
access-list 101 permit ip 192.168.10.0 0.0.0.255 any
no cdp run
control-plane
bridge 1 protocol ieee
bridge 1 route ip

[SOLVED] - Unable to Distribute to Some DP's: Failed to make a network connection to ADMIN$ (0x5)

For the past few days I've been struggling to wrap my head around what may have happened that resulted in distribution errors like this in distmgr.log:
Sleep 30 minutes... SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:35 PM 6584 (0x19B8)
Found notification for package 'AP2000D9' SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:40 PM 5288 (0x14A8)
Used 0 out of 5 allowed processing threads. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:40 PM 5288 (0x14A8)
Starting package processing thread, thread ID = 0x1BA8 (7080) SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:41 PM 5288 (0x14A8)
Sleep 3600 seconds... SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:41 PM 5288 (0x14A8)
STATMSG: ID=2300 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=AP2SCCM01.F.Q.D.N SITE=AP2 PID=11276 TID=7080 GMTDATE=Thu Apr 24 18:06:41.487 2014 ISTR0="Wireless (Internal)" ISTR1="AP2000D9" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="AP2000D9" SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:41 PM 7080 (0x1BA8)
No action specified for the package AP2000D9. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:41 PM 7080 (0x1BA8)
Start adding package to server ["Display=\\svcm01.F.Q.D.N\"]MSWNET:["SMS_SITE=AP2"]\\svcm01.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:41 PM 7080 (0x1BA8)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:41 PM 7772 (0x1E5C)
Start adding package to server ["Display=\\brcm01.F.Q.D.N\"]MSWNET:["SMS_SITE=AP2"]\\brcm01.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:41 PM 7080 (0x1BA8)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:41 PM 11496 (0x2CE8)
Start adding package to server ["Display=\\sfcm01.F.Q.D.N\"]MSWNET:["SMS_SITE=AP2"]\\sfcm01.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:41 PM 7080 (0x1BA8)
Will wait for 3 threads to end. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:41 PM 7080 (0x1BA8)
Thread Handle = 0000000000001D40 SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:41 PM 7080 (0x1BA8)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:41 PM 6680 (0x1A18)
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=AP2SCCM01.F.Q.D.N SITE=AP2 PID=11276 TID=11496 GMTDATE=Thu Apr 24 18:06:41.602 2014 ISTR0="Wireless (Internal)" ISTR1="["Display=\\brcm01.F.Q.D.N\"]MSWNET:["SMS_SITE=AP2"]\\brcm01.F.Q.D.N\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="AP2000D9" AID1=404 AVAL1="["Display=\\brcm01.F.Q.D.N\"]MSWNET:["SMS_SITE=AP2"]\\brcm01.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:41 PM 11496 (0x2CE8)
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=AP2SCCM01.F.Q.D.N SITE=AP2 PID=11276 TID=6680 GMTDATE=Thu Apr 24 18:06:41.610 2014 ISTR0="Wireless (Internal)" ISTR1="["Display=\\sfcm01.F.Q.D.N\"]MSWNET:["SMS_SITE=AP2"]\\sfcm01.F.Q.D.N\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="AP2000D9" AID1=404 AVAL1="["Display=\\sfcm01.F.Q.D.N\"]MSWNET:["SMS_SITE=AP2"]\\sfcm01.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:41 PM 6680 (0x1A18)
Get site system FQDN and account information from DB for ["Display=\\sfcm01.F.Q.D.N\"]MSWNET:["SMS_SITE=AP2"]\\sfcm01.F.Q.D.N\ SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:41 PM 6680 (0x1A18)
for ["Display=\\sfcm01.F.Q.D.N\"]MSWNET:["SMS_SITE=AP2"]\\sfcm01.F.Q.D.N\, no connection account is available SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:41 PM 6680 (0x1A18)
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=AP2SCCM01.F.Q.D.N SITE=AP2 PID=11276 TID=7772 GMTDATE=Thu Apr 24 18:06:41.655 2014 ISTR0="Wireless (Internal)" ISTR1="["Display=\\svcm01.F.Q.D.N\"]MSWNET:["SMS_SITE=AP2"]\\svcm01.F.Q.D.N\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="AP2000D9" AID1=404 AVAL1="["Display=\\svcm01.F.Q.D.N\"]MSWNET:["SMS_SITE=AP2"]\\svcm01.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:41 PM 7772 (0x1E5C)
Thread Handle = 0000000000002634 SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:41 PM 7080 (0x1BA8)
Thread Handle = 00000000000024E4 SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:41 PM 7080 (0x1BA8)
The current user context will be used for connecting to ["Display=\\brcm01.F.Q.D.N\"]MSWNET:["SMS_SITE=AP2"]\\brcm01.F.Q.D.N\. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 11496 (0x2CE8)
The current user context will be used for connecting to ["Display=\\sfcm01.F.Q.D.N\"]MSWNET:["SMS_SITE=AP2"]\\sfcm01.F.Q.D.N\. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 6680 (0x1A18)
The current user context will be used for connecting to ["Display=\\svcm01.F.Q.D.N\"]MSWNET:["SMS_SITE=AP2"]\\svcm01.F.Q.D.N\. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 7772 (0x1E5C)
Failed to make a network connection to \\brcm01.F.Q.D.N\ADMIN$ (0x5). SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 11496 (0x2CE8)
Cannot establish connection to ["Display=\\brcm01.F.Q.D.N\"]MSWNET:["SMS_SITE=AP2"]\\brcm01.F.Q.D.N\. Error = 5 SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 11496 (0x2CE8)
Failed to make a network connection to \\sfcm01.F.Q.D.N\ADMIN$ (0x5). SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 6680 (0x1A18)
STATMSG: ID=2323 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=AP2SCCM01.F.Q.D.N SITE=AP2 PID=11276 TID=11496 GMTDATE=Thu Apr 24 18:06:42.260 2014 ISTR0="5" ISTR1="3" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="AP2000D9" AID1=404 AVAL1="["Display=\\brcm01.F.Q.D.N\"]MSWNET:["SMS_SITE=AP2"]\\brcm01.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 11496 (0x2CE8)
Failed to make a network connection to \\svcm01.F.Q.D.N\ADMIN$ (0x5). SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 7772 (0x1E5C)
Error occurred. Performing error cleanup prior to returning. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 11496 (0x2CE8)
STATMSG: ID=2323 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=AP2SCCM01.F.Q.D.N SITE=AP2 PID=11276 TID=6680 GMTDATE=Thu Apr 24 18:06:42.329 2014 ISTR0="5" ISTR1="3" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="AP2000D9" AID1=404 AVAL1="["Display=\\sfcm01.F.Q.D.N\"]MSWNET:["SMS_SITE=AP2"]\\sfcm01.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 6680 (0x1A18)
Cannot establish connection to ["Display=\\sfcm01.F.Q.D.N\"]MSWNET:["SMS_SITE=AP2"]\\sfcm01.F.Q.D.N\. Error = 5 SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 6680 (0x1A18)
DP thread with array index 1 ended. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 7080 (0x1BA8)
Cannot establish connection to ["Display=\\svcm01.F.Q.D.N\"]MSWNET:["SMS_SITE=AP2"]\\svcm01.F.Q.D.N\. Error = 5 SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 7772 (0x1E5C)
Error occurred. Performing error cleanup prior to returning. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 7772 (0x1E5C)
STATMSG: ID=2323 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=AP2SCCM01.F.Q.D.N SITE=AP2 PID=11276 TID=7772 GMTDATE=Thu Apr 24 18:06:42.356 2014 ISTR0="5" ISTR1="3" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="AP2000D9" AID1=404 AVAL1="["Display=\\svcm01.F.Q.D.N\"]MSWNET:["SMS_SITE=AP2"]\\svcm01.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 7772 (0x1E5C)
Error occurred. Performing error cleanup prior to returning. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 6680 (0x1A18)
DP thread with thread handle 0000000000002634 and thread ID 11496 ended. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 7080 (0x1BA8)
Will wait for 2 threads to end. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 7080 (0x1BA8)
Thread Handle = 0000000000001D40 SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 7080 (0x1BA8)
Thread Handle = 00000000000024E4 SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 7080 (0x1BA8)
DP thread with array index 1 ended. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 7080 (0x1BA8)
DP thread with thread handle 00000000000024E4 and thread ID 6680 ended. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 7080 (0x1BA8)
Will wait for 1 threads to end. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 7080 (0x1BA8)
Thread Handle = 0000000000001D40 SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 7080 (0x1BA8)
DP thread with array index 0 ended. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 7080 (0x1BA8)
DP thread with thread handle 0000000000001D40 and thread ID 7772 ended. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:42 PM 7080 (0x1BA8)
Created policy provider trigger for ID AP2000D9 SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:44 PM 7080 (0x1BA8)
Package AP2000D9 does not have a preferred sender. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:44 PM 7080 (0x1BA8)
A program for package AP2000D9 has changed, therefore it needs to be replicated to all child sites. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:44 PM 7080 (0x1BA8)
Package AP2000D9 is new or has changed, replicating to all applicable sites. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:44 PM 7080 (0x1BA8)
CDistributionSrcSQL::UpdateAvailableVersion PackageID=AP2000D9, Version=1, Status=2301 SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:44 PM 7080 (0x1BA8)
StoredPkgVersion (1) of package AP2000D9. StoredPkgVersion in database is 1. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:44 PM 7080 (0x1BA8)
SourceVersion (1) of package AP2000D9. SourceVersion in database is 1. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:44 PM 7080 (0x1BA8)
STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=AP2SCCM01.F.Q.D.N SITE=AP2 PID=11276 TID=7080 GMTDATE=Thu Apr 24 18:06:44.252 2014 ISTR0="Wireless (Internal)" ISTR1="AP2000D9" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="AP2000D9" SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:44 PM 7080 (0x1BA8)
Failed to process package AP2000D9 after 0 retries, will retry 3 more times SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:44 PM 7080 (0x1BA8)
Exiting package processing thread. SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:44 PM 7080 (0x1BA8)
Sleep 30 minutes... SMS_DISTRIBUTION_MANAGER 4/24/2014 2:06:45 PM 6584 (0x19B8)
The log is huge so I invite you to check out the 'FailedDistributionLog.log' log in the 'FailedDistributionError5' folder of my OneDrive.
The hierarchy is simple:
single primary site with a local SQL installation, management point role (among other roles)
five other servers acting as the distribution points: 1 local, 4 remote
Something has changed recently because distribution was working fine up until I believe this week. I suspect some GPO is in place (or not in place) which is causing trouble, but I have not been successful in confirming that or isolating the issue to
anything other than "it affects my 2008 R2 servers".
What I've checked so far:
the site server (2008 R2 Standard) has no issues during distribution to itself
Local DP win7dp01 has no issues during distribution (this is a Windows 7 DP just for testing/proof of concept purposes)
Remote DP 2003dp01 (Server 2003) has no issues during distribution
Remote DP's 2008dp01, 2008dp02 & 2008dp03 (all 2008 R2 Standard) are producing the errors above
Site System Installation Account is set to 'Use the site server's computer account to install this site system'
All servers are joined to the same domain
All servers are members of an SCCM Servers AD security group
All servers have the above SCCM Servers AD security group added to the local administrators group
As part of troubleshooting, I've added the Site Server by name (domain\servername) to the local administrators group, in addition to the AD security group which its already a member of, to the three 2008 DP's that are failing. (The Windows 7 and 2003
DP's don't have this setup because they seem to be working fine with the AD security group.)
The firewall is disabled [via GPO] on all these servers & DP's
The ADMIN$ share is available & accessible on the three 2008 DP's
The three 2008 DP's have NO_SMS_ON_DRIVE.SMS only on the root drive (not the data drive)
The three 2008 DP's have Data drives which house the SCCMContentLib, SMSPKG$, SMS_DP$, SMSPKGSIG$ & RemoteInstall directories.
I checked the Share & NTFS permissions for the SCCMContentLib, SMSPKG$, SMS_DP$, SMSPKGSIG$ & REMINST shares, and local Administrators have full access/full control
The three 2008 DP's have at least 100GB free; this package is under 1MB.
The file 2 files in this package (one XML & one CMD) have very short file name lengths
The files in this package are not currently in use. (I've edited, renamed & moved them to be sure)
RSOP of the server confirms firewall is disabled (I checked wf.msc manually anyway)
Under Component Status, SMS_DISTRIBUTION_MANAGER is showing critical errors for the three 2008 DP's. I've copied up the relevant entries from the log up to my OneDrive as 'SMS_DISTRIBUTION_MANAGERLog.log'.
In short there are two error codes:
2323 with a description of:
Distribution Manager failed to connect to the distribution point.
Possible cause: Distribution Manager cannot access the distribution point machine because of access permissions issues.
Solution: Make sure that the site server machine account or Site System Installation account has administrative permissions on the distribution point machine.
Retry Interval is 5 minutes, number of retries left is 3.
2302 with a description of:
Distribution Manager failed to process package "My (Package)" (package ID = PRI000D9).
Possible cause: Distribution Manager does not have access to either the package source directory or the distribution point.
Solution: Verify that distribution manager can access the package source directory/distribution point.
Possible cause: The package source directory contains files with long file names and the total length of the path exceeds the maximum length supported by the operating system.
Solution: Reduce the number of folders defined for the package, shorten the filename, or consider bundling the files using a compression utility.
Possible cause: There is not enough disk space available on the site server computer or the distribution point.
Solution: Verify that there is enough free disk space available on the site server computer and on the distribution point.
Possible cause: The package source directory contains files that might be in use by an active process.
Solution: Close any processes that maybe using files in the source directory. If this failure persists, create an alternate copy of the source directory and update the package source to point to it.
I stood up 1 more DP on a 2003 servers which completed successfully. Its already received content error-free. I'll enable PXE & verify that works before standing up my final 2003 DP. I don't have any other 2008 servers I could test
this on which complicates this a bit.
Before I go standing up more [2008] servers, what else could I be testing/validating?

Tried to redistribute again this early morning and it looks like many packages succeeded but not all. For instance a .NET package I deployed reached 7 of 8 DP's, Dell CCTK reached 5 of 8 etc..
So seemingly by magic some DP's like some packages but not others. I quit.
distmgr log shows access denied errors as before:
Used 0 out of 5 allowed processing threads. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:43 PM 4324 (0x10E4)
Starting package processing thread, thread ID = 0x188C (6284) SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:44 PM 4324 (0x10E4)
Starting package processing thread, thread ID = 0x1DB0 (7600) SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:44 PM 4324 (0x10E4)
Starting package processing thread, thread ID = 0x1210 (4624) SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:45 PM 4324 (0x10E4)
Starting package processing thread, thread ID = 0x1858 (6232) SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:45 PM 4324 (0x10E4)
Starting package processing thread, thread ID = 0x5F8 (1528) SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 4324 (0x10E4)
Used all 5 allowed processing threads, won't process any more packages. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 4324 (0x10E4)
STATMSG: ID=2300 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=4624 GMTDATE=Tue May 13 16:09:46.240 2014 ISTR0="Nuance PDF Converter Enterprise 8.2" ISTR1="SITE10001C" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SITE10001C" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 4624 (0x1210)
STATMSG: ID=2300 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=6232 GMTDATE=Tue May 13 16:09:46.243 2014 ISTR0="PayneGroup Forms Assistant Add-in for Word 2007" ISTR1="SITE100022" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SITE100022" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 6232 (0x1858)
Sleep 3600 seconds... SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 4324 (0x10E4)
STATMSG: ID=2300 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=6284 GMTDATE=Tue May 13 16:09:46.248 2014 ISTR0="User State Migration Tool for Windows 8" ISTR1="SITE100001" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SITE100001" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 6284 (0x188C)
STATMSG: ID=2300 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=7600 GMTDATE=Tue May 13 16:09:46.246 2014 ISTR0="Workshare Professional 7.5" ISTR1="SITE100018" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SITE100018" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 7600 (0x1DB0)
No action specified for the package SITE100018. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 7600 (0x1DB0)
STATMSG: ID=2300 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=1528 GMTDATE=Tue May 13 16:09:46.250 2014 ISTR0="PayneGroup Metadata Assistant" ISTR1="SITE100023" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SITE100023" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 1528 (0x05F8)
No action specified for the package SITE100023. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 1528 (0x05F8)
Start updating the package on server ["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 1528 (0x05F8)
No action specified for the package SITE10001C. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 4624 (0x1210)
Start updating the package on server ["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 7600 (0x1DB0)
Start updating the package on server ["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 4624 (0x1210)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 5344 (0x14E0)
Start updating the package on server ["Display=\\remotedp04.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp04.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 4624 (0x1210)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 6464 (0x1940)
Start updating the package on server ["Display=\\remotedp05.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp05.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 4624 (0x1210)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 1000 (0x03E8)
Start updating the package on server ["Display=\\remotedp03.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp03.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 4624 (0x1210)
Will wait for 4 threads to end. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 4624 (0x1210)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 5504 (0x1580)
Thread Handle = 0000000000002618 SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 4624 (0x1210)
Start updating the package on server ["Display=\\remotedp04.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp04.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 1528 (0x05F8)
Thread Handle = 0000000000002B18 SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 4624 (0x1210)
Thread Handle = 000000000000258C SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 4624 (0x1210)
No action specified for the package SITE100001. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 6284 (0x188C)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 3684 (0x0E64)
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=5504 GMTDATE=Tue May 13 16:09:46.713 2014 ISTR0="Nuance PDF Converter Enterprise 8.2" ISTR1="["Display=\\remotedp03.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp03.F.Q.D.N\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE10001C" AID1=404 AVAL1="["Display=\\remotedp03.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp03.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 5504 (0x1580)
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=1000 GMTDATE=Tue May 13 16:09:46.738 2014 ISTR0="Nuance PDF Converter Enterprise 8.2" ISTR1="["Display=\\remotedp05.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp05.F.Q.D.N\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE10001C" AID1=404 AVAL1="["Display=\\remotedp05.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp05.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 1000 (0x03E8)
Get site system FQDN and account information from DB for ["Display=\\remotedp03.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp03.F.Q.D.N\ SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 5504 (0x1580)
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=6464 GMTDATE=Tue May 13 16:09:46.842 2014 ISTR0="Nuance PDF Converter Enterprise 8.2" ISTR1="["Display=\\remotedp04.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp04.F.Q.D.N\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE10001C" AID1=404 AVAL1="["Display=\\remotedp04.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp04.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 6464 (0x1940)
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=3684 GMTDATE=Tue May 13 16:09:46.762 2014 ISTR0="PayneGroup Metadata Assistant" ISTR1="["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE100023" AID1=404 AVAL1="["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 3684 (0x0E64)
Start updating the package on server ["Display=\\remotedp05.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp05.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 1528 (0x05F8)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 6832 (0x1AB0)
Start updating the package on server ["Display=\\remotedp03.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp03.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 1528 (0x05F8)
Will wait for 4 threads to end. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 1528 (0x05F8)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 6388 (0x18F4)
No action specified for the package SITE100022. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 6232 (0x1858)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:46 PM 6116 (0x17E4)
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=6832 GMTDATE=Tue May 13 16:09:47.037 2014 ISTR0="PayneGroup Metadata Assistant" ISTR1="["Display=\\remotedp04.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp04.F.Q.D.N\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE100023" AID1=404 AVAL1="["Display=\\remotedp04.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp04.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 6832 (0x1AB0)
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=6116 GMTDATE=Tue May 13 16:09:47.045 2014 ISTR0="PayneGroup Metadata Assistant" ISTR1="["Display=\\remotedp05.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp05.F.Q.D.N\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE100023" AID1=404 AVAL1="["Display=\\remotedp05.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp05.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 6116 (0x17E4)
Thread Handle = 00000000000026FC SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 1528 (0x05F8)
Thread Handle = 0000000000002160 SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 1528 (0x05F8)
Thread Handle = 0000000000002A18 SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 1528 (0x05F8)
Start updating the package on server ["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 6232 (0x1858)
for ["Display=\\remotedp03.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp03.F.Q.D.N\, no connection account is available SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 5504 (0x1580)
Thread Handle = 000000000000164C SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 1528 (0x05F8)
The current user context will be used for connecting to ["Display=\\remotedp05.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp05.F.Q.D.N\. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 1000 (0x03E8)
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=5344 GMTDATE=Tue May 13 16:09:47.335 2014 ISTR0="Nuance PDF Converter Enterprise 8.2" ISTR1="["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE10001C" AID1=404 AVAL1="["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 5344 (0x14E0)
The current user context will be used for connecting to ["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 3684 (0x0E64)
Sleep 30 minutes... SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 4468 (0x1174)
Start updating the package on server ["Display=\\remotedp04.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp04.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 6232 (0x1858)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 7072 (0x1BA0)
Start updating the package on server ["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 6284 (0x188C)
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=6388 GMTDATE=Tue May 13 16:09:47.457 2014 ISTR0="PayneGroup Metadata Assistant" ISTR1="["Display=\\remotedp03.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp03.F.Q.D.N\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE100023" AID1=404 AVAL1="["Display=\\remotedp03.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp03.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 6388 (0x18F4)
Get site system FQDN and account information from DB for ["Display=\\remotedp03.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp03.F.Q.D.N\ SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 6388 (0x18F4)
Failed to make a network connection to \\remotedp05.F.Q.D.N\ADMIN$ (0x5). SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 1000 (0x03E8)
The current user context will be used for connecting to ["Display=\\remotedp04.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp04.F.Q.D.N\. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 6832 (0x1AB0)
The current user context will be used for connecting to ["Display=\\remotedp05.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp05.F.Q.D.N\. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 6116 (0x17E4)
for ["Display=\\remotedp03.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp03.F.Q.D.N\, no connection account is available SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 6388 (0x18F4)
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=7072 GMTDATE=Tue May 13 16:09:47.653 2014 ISTR0="PayneGroup Forms Assistant Add-in for Word 2007" ISTR1="["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE100022" AID1=404 AVAL1="["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 7072 (0x1BA0)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 5752 (0x1678)
Will wait for 1 threads to end. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 6284 (0x188C)
Thread Handle = 00000000000026E0 SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 6284 (0x188C)
Start updating the package on server ["DISPLAY=\\remotedp01.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp01.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 7600 (0x1DB0)
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=7712 GMTDATE=Tue May 13 16:09:47.758 2014 ISTR0="Workshare Professional 7.5" ISTR1="["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE100018" AID1=404 AVAL1="["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 7712 (0x1E20)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 7712 (0x1E20)
Start updating the package on server ["Display=\\remotedp04.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp04.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 7600 (0x1DB0)
Start updating the package on server ["Display=\\remotedp05.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp05.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 7600 (0x1DB0)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 8080 (0x1F90)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 5628 (0x15FC)
Cannot establish connection to ["Display=\\remotedp05.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp05.F.Q.D.N\. Error = 5 SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 1000 (0x03E8)
Error occurred. Performing error cleanup prior to returning. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 1000 (0x03E8)
STATMSG: ID=2323 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=1000 GMTDATE=Tue May 13 16:09:47.921 2014 ISTR0="5" ISTR1="3" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE10001C" AID1=404 AVAL1="["Display=\\remotedp05.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp05.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 1000 (0x03E8)
The current user context will be used for connecting to ["Display=\\remotedp03.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp03.F.Q.D.N\. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 6388 (0x18F4)
The current user context will be used for connecting to ["Display=\\remotedp03.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp03.F.Q.D.N\. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:47 PM 5504 (0x1580)
Failed to make a network connection to \\remotedp02.F.Q.D.N\ADMIN$ (0x5). SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 3684 (0x0E64)
Failed to make a network connection to \\remotedp04.F.Q.D.N\ADMIN$ (0x5). SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 6832 (0x1AB0)
The current user context will be used for connecting to ["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 5344 (0x14E0)
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=5628 GMTDATE=Tue May 13 16:09:48.015 2014 ISTR0="Workshare Professional 7.5" ISTR1="["DISPLAY=\\remotedp01.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp01.F.Q.D.N\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE100018" AID1=404 AVAL1="["DISPLAY=\\remotedp01.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp01.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 5628 (0x15FC)
Thread Handle = 0000000000002320 SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 4624 (0x1210)
Failed to make a network connection to \\remotedp03.F.Q.D.N\ADMIN$ (0x5). SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 5504 (0x1580)
Failed to make a network connection to \\remotedp05.F.Q.D.N\ADMIN$ (0x5). SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 6116 (0x17E4)
STATMSG: ID=2323 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=5504 GMTDATE=Tue May 13 16:09:48.254 2014 ISTR0="5" ISTR1="3" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE10001C" AID1=404 AVAL1="["Display=\\remotedp03.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp03.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 5504 (0x1580)
Start updating the package on server ["Display=\\remotedp03.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp03.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 7600 (0x1DB0)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 2548 (0x09F4)
Cannot establish connection to ["Display=\\remotedp03.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp03.F.Q.D.N\. Error = 5 SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 5504 (0x1580)
The current user context will be used for connecting to ["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 7712 (0x1E20)
Failed to make a network connection to \\remotedp02.F.Q.D.N\ADMIN$ (0x5). SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 5344 (0x14E0)
The current user context will be used for connecting to ["Display=\\remotedp04.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp04.F.Q.D.N\. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 6464 (0x1940)
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=8080 GMTDATE=Tue May 13 16:09:48.397 2014 ISTR0="Workshare Professional 7.5" ISTR1="["Display=\\remotedp04.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp04.F.Q.D.N\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE100018" AID1=404 AVAL1="["Display=\\remotedp04.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp04.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 8080 (0x1F90)
STATMSG: ID=2323 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=6116 GMTDATE=Tue May 13 16:09:48.360 2014 ISTR0="5" ISTR1="3" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE100023" AID1=404 AVAL1="["Display=\\remotedp05.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp05.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 6116 (0x17E4)
Cannot establish connection to ["Display=\\remotedp05.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp05.F.Q.D.N\. Error = 5 SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 6116 (0x17E4)
STATMSG: ID=2323 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=6832 GMTDATE=Tue May 13 16:09:48.438 2014 ISTR0="5" ISTR1="3" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE100023" AID1=404 AVAL1="["Display=\\remotedp04.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp04.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 6832 (0x1AB0)
Cannot establish connection to ["Display=\\remotedp04.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp04.F.Q.D.N\. Error = 5 SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 6832 (0x1AB0)
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=5752 GMTDATE=Tue May 13 16:09:48.495 2014 ISTR0="User State Migration Tool for Windows 8" ISTR1="["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE100001" AID1=404 AVAL1="["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 5752 (0x1678)
Error occurred. Performing error cleanup prior to returning. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 6832 (0x1AB0)
Cannot establish connection to ["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\. Error = 5 SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 3684 (0x0E64)
Error occurred. Performing error cleanup prior to returning. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 3684 (0x0E64)
STATMSG: ID=2323 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=3684 GMTDATE=Tue May 13 16:09:48.597 2014 ISTR0="5" ISTR1="3" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE100023" AID1=404 AVAL1="["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 3684 (0x0E64)
Error occurred. Performing error cleanup prior to returning. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 5504 (0x1580)
The current user context will be used for connecting to ["DISPLAY=\\remotedp01.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp01.F.Q.D.N\. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 5628 (0x15FC)
The current user context will be used for connecting to ["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 7072 (0x1BA0)
Failed to make a network connection to \\remotedp02.F.Q.D.N\ADMIN$ (0x5). SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 7712 (0x1E20)
Failed to make a network connection to \\remotedp04.F.Q.D.N\ADMIN$ (0x5). SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 6464 (0x1940)
Cannot establish connection to ["Display=\\remotedp04.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp04.F.Q.D.N\. Error = 5 SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 6464 (0x1940)
STATMSG: ID=2323 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=6464 GMTDATE=Tue May 13 16:09:48.843 2014 ISTR0="5" ISTR1="3" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE10001C" AID1=404 AVAL1="["Display=\\remotedp04.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp04.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 6464 (0x1940)
DP thread with array index 1 ended. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 1528 (0x05F8)
Failed to make a network connection to \\remotedp01.F.Q.D.N\ADMIN$ (0x5). SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 5628 (0x15FC)
Start updating the package on server ["Display=\\remotedp05.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp05.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 6232 (0x1858)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 7992 (0x1F38)
DP thread with array index 2 ended. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 4624 (0x1210)
DP thread with thread handle 0000000000002B18 and thread ID 1000 ended. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 4624 (0x1210)
The current user context will be used for connecting to ["Display=\\remotedp04.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp04.F.Q.D.N\. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 8080 (0x1F90)
Will wait for 3 threads to end. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:48 PM 4624 (0x1210)
Thread Handle = 0000000000002618 SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 4624 (0x1210)
The current user context will be used for connecting to ["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 5752 (0x1678)
Thread Handle = 000000000000258C SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 4624 (0x1210)
Thread Handle = 0000000000002320 SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 4624 (0x1210)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 7964 (0x1F1C)
Will wait for 5 threads to end. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 7600 (0x1DB0)
Thread Handle = 0000000000002688 SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 7600 (0x1DB0)
Thread Handle = 0000000000002D40 SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 7600 (0x1DB0)
STATMSG: ID=2323 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=5344 GMTDATE=Tue May 13 16:09:49.282 2014 ISTR0="5" ISTR1="3" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE10001C" AID1=404 AVAL1="["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 5344 (0x14E0)
Thread Handle = 00000000000022F8 SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 7600 (0x1DB0)
Cannot establish connection to ["DISPLAY=\\remotedp01.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp01.F.Q.D.N\. Error = 5 SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 5628 (0x15FC)
Cannot establish connection to ["Display=\\remotedp02.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp02.F.Q.D.N\. Error = 5 SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 5344 (0x14E0)
Start updating the package on server ["Display=\\remotedp03.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp03.F.Q.D.N\... SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 6232 (0x1858)
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=2548 GMTDATE=Tue May 13 16:09:49.351 2014 ISTR0="Workshare Professional 7.5" ISTR1="["Display=\\remotedp05.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp05.F.Q.D.N\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE100018" AID1=404 AVAL1="["Display=\\remotedp05.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp05.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 2548 (0x09F4)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 6428 (0x191C)
Thread Handle = 000000000000234C SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 7600 (0x1DB0)
Thread Handle = 00000000000021B0 SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 7600 (0x1DB0)
Will wait for 4 threads to end. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 6232 (0x1858)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 752 (0x02F0)
STATMSG: ID=2342 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SITESERVER.F.Q.D.N SITE=SITE1 PID=2892 TID=6428 GMTDATE=Tue May 13 16:09:49.564 2014 ISTR0="PayneGroup Forms Assistant Add-in for Word 2007" ISTR1="["Display=\\remotedp05.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp05.F.Q.D.N\" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=2 AID0=400 AVAL0="SITE100022" AID1=404 AVAL1="["Display=\\remotedp05.F.Q.D.N\"]MSWNET:["SMS_SITE=SITE1"]\\remotedp05.F.Q.D.N\" SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 6428 (0x191C)
Error occurred. Performing error cleanup prior to returning. SMS_DISTRIBUTION_MANAGER 5/13/2014 12:09:49 PM 5628 (0x15FC)
Shell launched under site server context shows I can access \\remotedp01\admin$ & manipulate files & directories. (e.g.: mkdir \\remotedp01\admin$\test_%username% && echo %date% %time% > \\remotedp01\admin$\%username%.txt) Also
ran wbemtest again to confirm connectivity to \\remotedp01\root\cimv2.

I'm unable to login to facebook though I reinstalled twice, but as i try to login it gives an error message as timeout, connection failure or check internet connection.

Dear service provider, I'm unable to login to facebook even though i tried to uninstall and again reinstall as per the observation from the forum discussion.. but still it gives me arror as Timeout connection, or connection failure and check internet connection.. how to troubleshoot, pls suggest me..
2ndly I'm unable to search by some of the keywords in itunes. means iTune is not fetching the required information rather it gives no result found message..

Have you tried a hard reset of the iPod to see if that helps? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
Otherwise, work through each of the troubleshooting suggestions in this Apple support document as necessary.
iOS: Troubleshooting Wi-Fi networks and connections
B-rock

IMac is losing network connection

Hi all, since the latest Update to ML 10.8.4, my iMac loses the connection to my NAS server (Synology Diskstation DS212+) from time to time, which results in a freezing of the Finder. Due to that, the whole system "hangs" until the "Network connection lost" info box is shown..
I can also manually disconnect from the NAS (via WebInterface of DS212), then most of the time I can access the Mac again.
Did anyone encounter similar problems? I think I can exlude the NAS server as source of the failure, because I have two more iMacs (without the newest update) that don't show that problem.
All advice is appreciated! Any ideas, hints where to look?
Best regards
Oliver

Any ideas, hints where to look?
Synology tech support, or its user forums. All third-party NAS devices use the wretched "netatalk" impletmentation of AFP, which is completely untrustworthy.

HP OfficeJet Pro 8500A looses network connectivity

Hello community,
Got a strange thing setting up my brand new OJ 8500A: Connected the printer via LAN cable to an AVM 7270 router. Assigned a fixed IP on the router, using the printer’s MAC address (printer has automatic IP). Connecting the cable, the printer got it’s IP and I could install the printer driver on the connected PC’s without problem. Printing and scanning to disk worked fine and accessing the EWS was no problem.
But after a time (this is now between 30 sec and 2 min of idle time) the connection is lost. The port shows active on the router, but EWS can’t be reached and the printer does not reply pings. If I try to scan from the 8500A to the disk (server) I get a non-connectivity error message. Printing from a PC is not possible (says printer not available).
To get out of this I have to restart the printer or disconnect the LAN cable, re-connect, wait until the link is re-established and can do all (print, scan, EWS). After some time, (with the printer not being used) the connection is lost again.
I then changed to wireless. Here is the same issue – the connection restores if I disable the wireless link and re-establish.
There is no firewall except the AVM hardware firewall between the printer and the server. Scanning to disk after re-establishing the link always works and the printer replies ping requests from various sources. But it falls asleep soon thereafter. Both LAN port and WLAN have been confirmed to work for other devices (laptop computer).
Am kind of desperate and hope somebody out there can help. Searched the forum but not successful. Appreciate all help.
Thanks, Eric

Got some new info to share:
First, let me explain the details of my network: The network is based on a AVM 7270 (Fritz!Box Fon WLAN) with firmware 74.04.88. Several workstations are connected to this router: WinXP home, WinXP Pro and one Win7 are present. A Synology 107+ disk station running DSM3.0-1342 is connected and used as NAS. The HP8500A is connected (typically) via LAN (WLAN is possible and even more stable - just don't want to keep WLAN continuously on). The 107+ and the HP8500A have fixed IP’s defined on the AVM 7270 (via their MAC addresses). The computers use DHCP.
No connectivity problems are known in the entire network. It is running stable and reboots of router and NAS are done only on firmware upgrades or power failures. The 107+ holds the directory where the HP8500A scans network scans onto. The HP8500A was purchased in Germany the week prior Christmas. Installation of the software using the supplied CD was problem free. The HP8500A works fine (so printing or scanning from a PC, but also scanning from the printer to the NAS), as long as all is done right after start of the printer. After a while (this is 10 sec … 30 sec via LAN or 1 … 20 min via WLAN) the HP8500A is no longer reachable from any of the PC’s (no printing, no web service), but also fails to connect to the NAS for network scans. When I get the connection failure message and I ping the printer, it returns the first of the 4 pings. The remaining 3 fail. If I ping right again, all 4 pings fail. If I ping a few minutes later, the first ping is returned, the other ones fail. If I wait longer I realized that the connection is restored after some time (>15 min), but still not lasting.
When I connect my laptop (WinXP) directly to the HP8500A (all fixed IP’s), the connection remains stable. Printing to the printer or scanning from the printer to the laptop is enabled all time.
When I connect my laptop and the HP8500A to a Netgear DS108 hub (without the AVM 7270), the connection remains same stable as the direct connection between laptop and printer.
When I connect my laptop and the HP8500A to an Eumex 704PC LAN router (my previous (and still backup) router), the connection is stable.
When I connect a.m. configuration to the AVM 7270, the problem re-occurs. If I disconnect the AVM 7270, the connection remains active.
Right now I have the original configuration restored (HP8500A connected via LAN to the AVM 7270). The connection fails as described above. But periodically it seems to wake up (see also above). Print jobs that are spooled suddenly are executed. Unfortunately this is not predictable – can take 15 … 30 min. But I have got all pages printed after some while…
This is the reason why I think this particular issue is not driver related. Scans to network (Synology NAS) do not use the Windows platform – and are affected too. There seems to be an incompatibility between the HP8500A and the AVM 7270. This incompatibility seems not to exist between the HP8500A and the older models Eumex 704 or Netgear DS108 (simple hub, no router). HP service states they have 6 HP8500A printers stable running in their network (have no info about details). But obviously there must be a number of customers without problems. So, what makes the combination of HP8500A and AVM 7270 instable? And is the AVM 7270 the only router that shows this problem – this forum indicates several other configurations that also drop connection. Is there a protocol detail where the AVM 7270 cuts the connection as it may feel intrigued? Is it the AVM 7270 that stops talking to the HP8500A or is it the HP8500A that stops talking on the network? Why is always the first ping returned with normal response time?
Lots of questions. Maybe there is somebody out there that can arrange these puzzle pieces into a picture…
Best regards
Eric

The processing of Group Policy failed because of lack of network connectivity to a domain controller

We are setting up a new AD environment with one AD/DC running DNS services, and a secondary DNS server configured with secondary zone. The problem is that none of the machines in the the domain are getting GPO.
When I run a gpupdate /force from a machine, I get the following output:
"Updating Policy...
User Policy update has completed successfully.
Computer policy could not be updated successfully. The following errors were enc
ountered:
The processing of Group Policy failed because of lack of network connectivity to
a domain controller. This may be a transient condition. A success message would
be generated once the machine gets connected to the domain controller and Group
Policy has succesfully processed. If you do not see a success message for sever
al hours, then contact your administrator.
To diagnose the failure, review the event log or run GPRESULT /H GPReport.html f
rom the command line to access information about Group Policy results."
While the system event log outputs the following:
"The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain controller and Group Policy
has succesfully processed. If you do not see a success message for several hours, then contact your administrator."
All the machines that were joined to the domain are able to resolve in forward and reverse lookups, ping the DC and ping each other so I dont understand how the error can be resolved.
Here are few things I have tried:
1. I came across this KB which checked ok for me: http://support.microsoft.com/kb/241515
2. Made a copy of the default GPO, applied to a OU with one machine, and made sure to remove any GPO links from above
3. Enabled the following two local Group policies on a test member:
GP slow link detection
Startup policy processing wait time
4. Modified firewall to allow everything on both member and DC
5. Verified DSN logs, SRV records, access to sysvol ( added authenticated users to sysvol)
I have yet to figure out the reason for this issue. Has anyone seen anything like this before?

1. I checked the NIC, it only has one IP. and I followed your article. I set the primary DNS to its own IP and the secondary DNS to the loopback ip
2. This is a new DC and DNS server. I dont have old records yet. I also check the DNS event logs. No errors
3. I made sure the member server is pointing only to the only DC/DNS server
4. Here is the output from the dcdiag.... everything passed except, the Netlogons part. I'm not sure what means or how to fix it yet:
Starting test: NetLogons
* Warning BUILTIN\Administrators did not have the "Access this
computer
"* from network" right.
[hostname] An net use or LsaPolicy operation failed with error
1, Incorrect function..
......................... hostname failed test NetLogons
Complete output:
> hostname
Server: hostname.domain.local
Address: X.X.X.95
> ^C
C:\Windows\system32>
C:\Windows\system32>nslookup
> set type=all
>
>
>
> _ldap._tcp.dc._msdcs.domainname
_ldap._tcp.dc._msdcs.domain.local SRV service location:
priority = 0
weight = 100
port = 389
svr hostname = hostname.domain.local
hostname.domain.local internet address = X.X.X.95
> ^C
C:\Windows\system32>cd ..
C:\Windows>cd SYSVOL
C:\Windows\SYSVOL>cd sysvol
C:\Windows\SYSVOL\sysvol>dir
Volume in drive C has no label.
Volume Serial Number is F624-CDB2
Directory of C:\Windows\SYSVOL\sysvol
10/29/2014 08:25 PM <DIR> .
10/29/2014 08:25 PM <DIR> ..
10/29/2014 08:25 PM <JUNCTION> domain.local [C:\Windows\SYSVOL\domain]
0 File(s) 0 bytes
3 Dir(s) 63,971,037,184 bytes free
C:\Windows\SYSVOL\sysvol>dcdiag
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = hostname
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\hostname
Starting test: Connectivity
......................... hostname passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\hostname
Starting test: Advertising
......................... hostname passed test Advertising
Starting test: FrsEvent
......................... hostname passed test FrsEvent
Starting test: DFSREvent
......................... hostname passed test DFSREvent
Starting test: SysVolCheck
......................... hostname passed test SysVolCheck
Starting test: KccEvent
......................... hostname passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... hostname passed test
KnowsOfRoleHolders
Starting test: MachineAccount
......................... hostname passed test MachineAccount
Starting test: NCSecDesc
......................... hostname passed test NCSecDesc
Starting test: NetLogons
* Warning BUILTIN\Administrators did not have the "Access this
computer
"* from network" right.
[hostname] An net use or LsaPolicy operation failed with error
1, Incorrect function..
......................... hostname failed test NetLogons
Starting test: ObjectsReplicated
......................... hostname passed test
ObjectsReplicated
Starting test: Replications
......................... hostname passed test Replications
Starting test: RidManager
......................... hostname passed test RidManager
Starting test: Services
......................... hostname passed test Services
Starting test: SystemLog
A warning event occurred. EventID: 0x000003F6
Time Generated: 03/04/2015 18:23:06
Event String:
Name resolution for the name ctldl.windowsupdate.com timed out after
none of the configured DNS servers responded.
......................... hostname passed test SystemLog
Starting test: VerifyReferences
......................... hostname passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : emcdsm
Starting test: CheckSDRefDom
......................... emcdsm passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... emcdsm passed test CrossRefValidation
Running enterprise tests on : domain.local
Starting test: LocatorCheck
......................... domain.local passed test LocatorCheck
Starting test: Intersite
......................... domain.local passed test Intersite
C:\Windows\SYSVOL\sysvol>

Error message pops up saying "Network Connection could not find a PPPoe Server.

I am trying to update my wife's iBook, 2,1 for my mom to use. It is running OS 10.6.8. Every time I wake up the computer an error message pops up saying "Network Connection could not find a PPPoe Server." It does it periodically when the computer is on. It will drive my mom nuts and worry her. Can anyone help me stop this from happening?
Thanks,
KC

Hello kevinfromwauwatosa,
Thanks for the question. The following article provides the most relevant information to your issue:
Troubleshooting "A connection failure has occurred", "The specified server could not be found" or similar messages
http://support.apple.com/kb/TS1843
For additional information see this resource:
Mac OS X: Troubleshooting a PPPoE Internet Connection
http://support.apple.com/kb/TS1871
Thanks,
Matt M.

Time Capsule connection failure

My Airport Time Capsule has a "Connection failure" message in my finder. The actual device flahes orange, it has been doing this for a while but it hasn't been a problem until now. I've always been able to connect through it to WiFi and backup wirelessly. Now My wifi is connected but I can't back up my time machine. I'm not sure how to "reset" it, and it doesn't seem to have any other problem when I looked at the diagnostics. The "Connect As" doesn't work either as it says I need to check my network connection.
Thanks for the help

Reboot the TC alone..
No luck reboot the whole network.. restart in correct order.
Modem.. TC.. wait 2min for each.
Clients.
No luck.. are you on Mavericks.. we will need to detail a whole full network reset to factory and overhaul.
To do that we need full network info. Models and versions of everything.

Network connection Failure:

Similar Messages

Maybe you are looking for